Construction and Building Materials - June 2013

Published:	June 2013

Articles in this Issue

Author(s)	Title	Page(s)
Garnier, Vincent / Piwakowski, Bogdan / Abraham, Odile / Villain, Géraldine / Payan, Cédric / Chaix, Jean François	Acoustic techniques for concrete evaluation: Improvements, comparisons and consistency	598-613
Leijten, A. J. M. / Brandon, D.	Advances in moment transfering dvw reinforced timber connections – Analysis and experimental verification, Part 1	614-622
Chalioris, Constantin E.	Analytical approach for the evaluation of minimum fibre factor required for steel fibrous concrete beams under combined shear and flexure	317-336
Huang, Chung-Ho / Wang, Shun-Yuan	Application of water treatment sludge in the manufacturing of lightweight aggregate	174-183
Kalupahana, W. K. K. G. / Ibell, T. J. / Darby, A. P.	Bond characteristics of near surface mounted CFRP bars	58-68
Turner, Louise K. / Collins, Frank G.	Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete	125-130
Farzadnia, Nima / Abang Ali, Abang Abdullah / Demirboğa, Ramazan / Anwar, Mohammed Parvez	Characterization of high strength mortars with nano Titania at elevated temperatures	469-479
Richardson, Alan / Broadfoot, Antony	Closed loop wire reinforcement to concrete beams	278-285
Kumar, Aditya / Oey, Tandre / Falla, Guillermo Puerta / Henkensiefken, Ryan / Neithalath, Narayanan / Sant, Gaurav	A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials	428-435
Kar, Arkamitra / Ray, Indrajit / Unnikrishnan, Avinash / Davalos, Julio F.	Composite modeling to predict shrinkage of concretes containing supplementary cementitious materials from paste volumes	139-155
Sebaibi, Nassim / Benzerzour, Mahfoud / Sebaibi, Yahya / Abriak, Nor-Edine	Composition of self compacting concrete (SCC) using the compressible packing model, the Chinese method and the European standard	382-388
de la Fuente, Albert / Escariz, Renata C. / de Figueiredo, Antonio D. / Aguado, Antonio	Design of macro-synthetic fibre reinforced concrete pipes	523-532
Dizhur, D. / Ingham, J. M.	Diagonal tension strength of vintage unreinforced clay brick masonry wall panels	418-427
Sotiriadis, K. / Nikolopoulou, E. / Tsivilis, S. / Pavlou, A. / Chaniotakis, E. / Swamy, R. N.	The effect of chlorides on the thaumasite form of sulfate attack of limestone cement concrete containing mineral admixtures at low temperature	156-164
Gao, Yingli / Cheng, Ling / Gao, Zheming / Guo, Shiying	Effects of different mineral admixtures on carbonation resistance of lightweight aggregate concrete	506-510
Sengoz, Burak / Topal, Ali / Gorkem, Cagri	Evaluation of natural zeolite as warm mix asphalt additive and its comparison with other warm mix additives	242-252
Zhao, Zhihui / Wang, Shoude / Lu, Lingchao / Gong, Chenchen	Evaluation of pre-coated recycled aggregate for concrete and mortar	191-196
Bernat, Ernest / Gil, Lluís / Roca, Pere / Sandoval, Cristián	Experimental and numerical analysis of bending–buckling mixed failure of brickwork walls	1-13
Mermerdaş, Kasım / Güneyisi, Erhan / Gesoǧlu, Mehmet / Özturan, Turan	Experimental evaluation and modeling of drying shrinkage behavior of metakaolin and calcined kaolin blended concretes	337-347
Ambassa, Zoa / Allou, Fatima / Petit, Christophe / Eko, Robert Medjo	Fatigue life prediction of an asphalt pavement subjected to multiple axle loadings with viscoelastic FEM	443-452
Pedreschi, Remo	A feasibility study of post-tensioned stone for cladding	225-232
Schoon, Joris / Vergari, Anne / De Buysser, Klaartje / Van Driessche, Isabel / De Belie, Nele	Fines extracted from porphyry and dolomitic limestone aggregates production: MgO as fluxing agent for a sustainable Portland clinker production	511-522
Yang, You-long / Liu, Jin-wei / Xiong, Guang-jing	Flexural behavior of wood beams strengthened with HFRP	118-124
Shoukry, H. / Kotkata, M. F. / Abo-El-Enein, S. A. / Morsy, M. S.	Flexural strength and physical properties of fiber reinforced nano metakaolin cementitious surface compound	453-460
Coleri, Erdem / Harvey, John T.	A fully heterogeneous viscoelastic finite element model for full-scale accelerated pavement testing	14-30
Xue, Qiang / Liu, Lei	Hydraulic-stress coupling effects on dynamic behavior of asphalt pavement structure material	31-36
Kong, Deyu / Su, Yong / Du, Xiangfei / Yang, Yang / Wei, Su / Shah, Surendra P.	Influence of nano-silica agglomeration on fresh properties of cement pastes	557-562
Tomor, Adrienn / Verstrynge, Els	A joint fatigue–creep deterioration model for masonry with acoustic emission based damage assessment	575-588
Pasandín, A. R. / Pérez, I.	Laboratory evaluation of hot-mix asphalt containing construction and demolition waste	497-505
Lyu, Syuan-Jhih / Wang, Tai-Tien / Cheng, Ta-Wui / Ueng, Tzuu-Hsing	Main factors affecting mechanical characteristics of geopolymer revealed by experimental design and associated statistical analysis	589-597
Soe, Khin T. / Zhang, Y. X. / Zhang, L. C.	Material properties of a new hybrid fibre-reinforced engineered cementitious composite	399-407
Lombillo, I. / Thomas, C. / Villegas, L. / Fernández-Álvarez, J. P. / Norambuena-Contreras, J.	Mechanical characterization of rubble stone masonry walls using non and minor destructive tests	266-277
Sadique, Monower / Al-Nageim, Hassan / Atherton, William / Seton, Linda / Dempster, Nicola	Mechano-chemical activation of high-Ca fly ash by cement free blending and gypsum aided grinding	480-489
Van, Viet-Thien-An / Rößler, Christiane / Bui, Danh-Dai / Ludwig, Horst-Michael	Mesoporous structure and pozzolanic reactivity of rice husk ash in cementitious system	208-216
Kupaei, Ramin Hosseini / Alengaram, U. Johnson / Jumaat, Mohd Zamin Bin / Nikraz, Hamid	Mix design for fly ash based oil palm shell geopolymer lightweight concrete	490-496
da Costa, A. / Fenaux, M. / Fernández, J. / Sánchez, E. / Moragues, A.	Modelling of chloride penetration into non-saturated concrete: Case study application for real marine offshore structures	217-224
Khan, Rawid / Grenfell, James / Collop, Andrew / Airey, Gordon / Gregory, Hannah	Moisture damage in asphalt mixtures using the modified SATS test and image analysis	165-173
Ding, Yining / Chen, Zhipei / Han, Zhibo / Zhang, Yulin / Pacheco-Torgal, F.	Nano-carbon black and carbon fiber as conductive materials for the diagnosing of the damage of concrete beam	233-241
Krishnan, Padmaja / Zhang, Min-Hong / Cheng, Yuhan / Riang, Dipo Tamliang / Yu, Liya E.	Photocatalytic degradation of SO2 using TiO2-containing silicate as a building coating material	197-202
Gunasekaran, K. / Annadurai, R. / Kumar, P. S.	Plastic shrinkage and deflection characteristics of coconut shell concrete slab	203-207
Kim, Yail J. / Yoshitake, Isamu / Yang, Mijia	A predictive investigation associated with design recommendations for CFRP-confined concrete in aggressive service environments	69-79
Reig, L. / Tashima, M. M. / Borrachero, M. V. / Monzó, J. / Cheeseman, C. R. / Payá, J.	Properties and microstructure of alkali-activated red clay brick waste	98-106
Fava, Giulia / Carvelli, Valter / Poggi, Carlo	Pull-out strength of glued-in FRP plates bonded in glulam	362-371
Zhang, Feng / Hu, Changbin	The research for SBS and SBR compound modified asphalts with polyphosphoric acid and sulfur	461-468
Shaikh, Faiz Uddin Ahmed	Review of mechanical properties of short fibre reinforced geopolymer composites	37-49
Liu, Yu / You, Zhanping / Li, Lei / Wang, Wei	Review on advances in modeling and simulation of stone-based paving materials	408-417
Kim, Jinsup / Kwon, Minho / Jung, WooYoung / Limkatanyu, Suchart	Seismic performance evaluation of RC columns reinforced by GFRP composite sheets with clip connectors	563-574
Soetens, T. / Van Gysel, A. / Matthys, S. / Taerwe, L.	A semi-analytical model to predict the pull-out behaviour of inclined hooked-end steel fibres	253-265
Ceylan, Halil / Kim, Sunghwan / Gopalakrishnan, Kasthurirangan / Schwartz, Charles W. / Li, Rui	Sensitivity quantification of jointed plain concrete pavement mechanistic-empirical performance predictions	545-556
Toma, Ionut-Ovidiu / Covatariu, Daniel / Toma, Ana-Maria / Taranu, George / Budescu, Mihai	Strength and elastic properties of mortars with various percentages of environmentally sustainable mineral binder	348-361
Jeong, Young-Soo / Kainuma, Shigenobu / Ahn, Jin-Hee	Structural response of orthotropic bridge deck depending on the corroded deck surface	87-97
Rodríguez-Alloza, Ana María / Gallego, Juan / Pérez, Ignacio	Study of the effect of four warm mix asphalt additives on bitumen modified with 15% crumb rubber	300-308
Qiang, Xue / Lei, Liu / Yi-jun, Chen	Study on the action effect of pavement straw composite fiber material in asphalt mixture	293-299
Zhu, Jue / Cao, Yong-hui / Chen, Jiang-ying	Study on the evolution of dynamic mechanics properties of cement mortar under sulfate attack	286-292
Ariffin, M. A. M. / Bhutta, M. A. R. / Hussin, M. W. / Mohd Tahir, M. / Aziah, Nor	Sulfuric acid resistance of blended ash geopolymer concrete	80-86
Aydın, Serdar	A ternary optimisation of mineral additives of alkali activated cement mortars	131-138
Raposeiras, A. C. / Castro-Fresno, D. / Vega-Zamanillo, A. / Rodriguez-Hernandez, J.	Test methods and influential factors for analysis of bonding between bituminous pavement layers	372-381
Ferrari, Simone / Zanotto, Valentina	The thermal performance of walls under actual service conditions: Evaluating the results of climatic chamber tests	309-316
Anochie-Boateng, Joseph K. / Komba, Julius J. / Mvelase, Gculisile M.	Three-dimensional laser scanning technique to quantify aggregate and ballast shape properties	389-398
Moreno-Navarro, F. / Rubio-Gámez, M. C.	UGR-FACT test for the study of fatigue cracking in bituminous mixes	184-190
García, Álvaro / Norambuena-Contreras, José / Partl, Manfred N. / Schuetz, Philipp	Uniformity and mechanical properties of dense asphalt concrete with steel wool fibers	107-117
Safi, Brahim / Saidi, Mohammed / Aboutaleb, Djamila / Maallem, Madani	The use of plastic waste as fine aggregate in the self-compacting mortars: Effect on physical and mechanical properties	436-442
Bhutta, Muhammad Aamer Rafique / Maruya, Tsuyoshi / Tsuruta, Ken	Use of polymer-impregnated concrete permanent form in marine environment: 10-year outdoor exposure in Saudi Arabia	50-57
Abdou, A. / Budaiwi, I.	The variation of thermal conductivity of fibrous insulation materials under different levels of moisture content	533-544

About this
data sheet
IssueID
22509
Published on:
16/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - June 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - June 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.