Construction and Building Materials - juin 2013

Publié:	juin 2013

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Garnier, Vincent / Piwakowski, Bogdan / Abraham, Odile / Villain, Géraldine / Payan, Cédric / Chaix, Jean François	Acoustic techniques for concrete evaluation: Improvements, comparisons and consistency	598-613
Leijten, A. J. M. / Brandon, D.	Advances in moment transfering dvw reinforced timber connections – Analysis and experimental verification, Part 1	614-622
Chalioris, Constantin E.	Analytical approach for the evaluation of minimum fibre factor required for steel fibrous concrete beams under combined shear and flexure	317-336
Huang, Chung-Ho / Wang, Shun-Yuan	Application of water treatment sludge in the manufacturing of lightweight aggregate	174-183
Kalupahana, W. K. K. G. / Ibell, T. J. / Darby, A. P.	Bond characteristics of near surface mounted CFRP bars	58-68
Turner, Louise K. / Collins, Frank G.	Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete	125-130
Farzadnia, Nima / Abang Ali, Abang Abdullah / Demirboğa, Ramazan / Anwar, Mohammed Parvez	Characterization of high strength mortars with nano Titania at elevated temperatures	469-479
Richardson, Alan / Broadfoot, Antony	Closed loop wire reinforcement to concrete beams	278-285
Kumar, Aditya / Oey, Tandre / Falla, Guillermo Puerta / Henkensiefken, Ryan / Neithalath, Narayanan / Sant, Gaurav	A comparison of intergrinding and blending limestone on reaction and strength evolution in cementitious materials	428-435
Kar, Arkamitra / Ray, Indrajit / Unnikrishnan, Avinash / Davalos, Julio F.	Composite modeling to predict shrinkage of concretes containing supplementary cementitious materials from paste volumes	139-155
Sebaibi, Nassim / Benzerzour, Mahfoud / Sebaibi, Yahya / Abriak, Nor-Edine	Composition of self compacting concrete (SCC) using the compressible packing model, the Chinese method and the European standard	382-388
de la Fuente, Albert / Escariz, Renata C. / de Figueiredo, Antonio D. / Aguado, Antonio	Design of macro-synthetic fibre reinforced concrete pipes	523-532
Dizhur, D. / Ingham, J. M.	Diagonal tension strength of vintage unreinforced clay brick masonry wall panels	418-427
Sotiriadis, K. / Nikolopoulou, E. / Tsivilis, S. / Pavlou, A. / Chaniotakis, E. / Swamy, R. N.	The effect of chlorides on the thaumasite form of sulfate attack of limestone cement concrete containing mineral admixtures at low temperature	156-164
Gao, Yingli / Cheng, Ling / Gao, Zheming / Guo, Shiying	Effects of different mineral admixtures on carbonation resistance of lightweight aggregate concrete	506-510
Sengoz, Burak / Topal, Ali / Gorkem, Cagri	Evaluation of natural zeolite as warm mix asphalt additive and its comparison with other warm mix additives	242-252
Zhao, Zhihui / Wang, Shoude / Lu, Lingchao / Gong, Chenchen	Evaluation of pre-coated recycled aggregate for concrete and mortar	191-196
Bernat, Ernest / Gil, Lluís / Roca, Pere / Sandoval, Cristián	Experimental and numerical analysis of bending–buckling mixed failure of brickwork walls	1-13
Mermerdaş, Kasım / Güneyisi, Erhan / Gesoǧlu, Mehmet / Özturan, Turan	Experimental evaluation and modeling of drying shrinkage behavior of metakaolin and calcined kaolin blended concretes	337-347
Ambassa, Zoa / Allou, Fatima / Petit, Christophe / Eko, Robert Medjo	Fatigue life prediction of an asphalt pavement subjected to multiple axle loadings with viscoelastic FEM	443-452
Pedreschi, Remo	A feasibility study of post-tensioned stone for cladding	225-232
Schoon, Joris / Vergari, Anne / De Buysser, Klaartje / Van Driessche, Isabel / De Belie, Nele	Fines extracted from porphyry and dolomitic limestone aggregates production: MgO as fluxing agent for a sustainable Portland clinker production	511-522
Yang, You-long / Liu, Jin-wei / Xiong, Guang-jing	Flexural behavior of wood beams strengthened with HFRP	118-124
Shoukry, H. / Kotkata, M. F. / Abo-El-Enein, S. A. / Morsy, M. S.	Flexural strength and physical properties of fiber reinforced nano metakaolin cementitious surface compound	453-460
Coleri, Erdem / Harvey, John T.	A fully heterogeneous viscoelastic finite element model for full-scale accelerated pavement testing	14-30
Xue, Qiang / Liu, Lei	Hydraulic-stress coupling effects on dynamic behavior of asphalt pavement structure material	31-36
Kong, Deyu / Su, Yong / Du, Xiangfei / Yang, Yang / Wei, Su / Shah, Surendra P.	Influence of nano-silica agglomeration on fresh properties of cement pastes	557-562
Tomor, Adrienn / Verstrynge, Els	A joint fatigue–creep deterioration model for masonry with acoustic emission based damage assessment	575-588
Pasandín, A. R. / Pérez, I.	Laboratory evaluation of hot-mix asphalt containing construction and demolition waste	497-505
Lyu, Syuan-Jhih / Wang, Tai-Tien / Cheng, Ta-Wui / Ueng, Tzuu-Hsing	Main factors affecting mechanical characteristics of geopolymer revealed by experimental design and associated statistical analysis	589-597
Soe, Khin T. / Zhang, Y. X. / Zhang, L. C.	Material properties of a new hybrid fibre-reinforced engineered cementitious composite	399-407
Lombillo, I. / Thomas, C. / Villegas, L. / Fernández-Álvarez, J. P. / Norambuena-Contreras, J.	Mechanical characterization of rubble stone masonry walls using non and minor destructive tests	266-277
Sadique, Monower / Al-Nageim, Hassan / Atherton, William / Seton, Linda / Dempster, Nicola	Mechano-chemical activation of high-Ca fly ash by cement free blending and gypsum aided grinding	480-489
Van, Viet-Thien-An / Rößler, Christiane / Bui, Danh-Dai / Ludwig, Horst-Michael	Mesoporous structure and pozzolanic reactivity of rice husk ash in cementitious system	208-216
Kupaei, Ramin Hosseini / Alengaram, U. Johnson / Jumaat, Mohd Zamin Bin / Nikraz, Hamid	Mix design for fly ash based oil palm shell geopolymer lightweight concrete	490-496
da Costa, A. / Fenaux, M. / Fernández, J. / Sánchez, E. / Moragues, A.	Modelling of chloride penetration into non-saturated concrete: Case study application for real marine offshore structures	217-224
Khan, Rawid / Grenfell, James / Collop, Andrew / Airey, Gordon / Gregory, Hannah	Moisture damage in asphalt mixtures using the modified SATS test and image analysis	165-173
Ding, Yining / Chen, Zhipei / Han, Zhibo / Zhang, Yulin / Pacheco-Torgal, F.	Nano-carbon black and carbon fiber as conductive materials for the diagnosing of the damage of concrete beam	233-241
Krishnan, Padmaja / Zhang, Min-Hong / Cheng, Yuhan / Riang, Dipo Tamliang / Yu, Liya E.	Photocatalytic degradation of SO2 using TiO2-containing silicate as a building coating material	197-202
Gunasekaran, K. / Annadurai, R. / Kumar, P. S.	Plastic shrinkage and deflection characteristics of coconut shell concrete slab	203-207
Kim, Yail J. / Yoshitake, Isamu / Yang, Mijia	A predictive investigation associated with design recommendations for CFRP-confined concrete in aggressive service environments	69-79
Reig, L. / Tashima, M. M. / Borrachero, M. V. / Monzó, J. / Cheeseman, C. R. / Payá, J.	Properties and microstructure of alkali-activated red clay brick waste	98-106
Fava, Giulia / Carvelli, Valter / Poggi, Carlo	Pull-out strength of glued-in FRP plates bonded in glulam	362-371
Zhang, Feng / Hu, Changbin	The research for SBS and SBR compound modified asphalts with polyphosphoric acid and sulfur	461-468
Shaikh, Faiz Uddin Ahmed	Review of mechanical properties of short fibre reinforced geopolymer composites	37-49
Liu, Yu / You, Zhanping / Li, Lei / Wang, Wei	Review on advances in modeling and simulation of stone-based paving materials	408-417
Kim, Jinsup / Kwon, Minho / Jung, WooYoung / Limkatanyu, Suchart	Seismic performance evaluation of RC columns reinforced by GFRP composite sheets with clip connectors	563-574
Soetens, T. / Van Gysel, A. / Matthys, S. / Taerwe, L.	A semi-analytical model to predict the pull-out behaviour of inclined hooked-end steel fibres	253-265
Ceylan, Halil / Kim, Sunghwan / Gopalakrishnan, Kasthurirangan / Schwartz, Charles W. / Li, Rui	Sensitivity quantification of jointed plain concrete pavement mechanistic-empirical performance predictions	545-556
Toma, Ionut-Ovidiu / Covatariu, Daniel / Toma, Ana-Maria / Taranu, George / Budescu, Mihai	Strength and elastic properties of mortars with various percentages of environmentally sustainable mineral binder	348-361
Jeong, Young-Soo / Kainuma, Shigenobu / Ahn, Jin-Hee	Structural response of orthotropic bridge deck depending on the corroded deck surface	87-97
Rodríguez-Alloza, Ana María / Gallego, Juan / Pérez, Ignacio	Study of the effect of four warm mix asphalt additives on bitumen modified with 15% crumb rubber	300-308
Qiang, Xue / Lei, Liu / Yi-jun, Chen	Study on the action effect of pavement straw composite fiber material in asphalt mixture	293-299
Zhu, Jue / Cao, Yong-hui / Chen, Jiang-ying	Study on the evolution of dynamic mechanics properties of cement mortar under sulfate attack	286-292
Ariffin, M. A. M. / Bhutta, M. A. R. / Hussin, M. W. / Mohd Tahir, M. / Aziah, Nor	Sulfuric acid resistance of blended ash geopolymer concrete	80-86
Aydın, Serdar	A ternary optimisation of mineral additives of alkali activated cement mortars	131-138
Raposeiras, A. C. / Castro-Fresno, D. / Vega-Zamanillo, A. / Rodriguez-Hernandez, J.	Test methods and influential factors for analysis of bonding between bituminous pavement layers	372-381
Ferrari, Simone / Zanotto, Valentina	The thermal performance of walls under actual service conditions: Evaluating the results of climatic chamber tests	309-316
Anochie-Boateng, Joseph K. / Komba, Julius J. / Mvelase, Gculisile M.	Three-dimensional laser scanning technique to quantify aggregate and ballast shape properties	389-398
Moreno-Navarro, F. / Rubio-Gámez, M. C.	UGR-FACT test for the study of fatigue cracking in bituminous mixes	184-190
García, Álvaro / Norambuena-Contreras, José / Partl, Manfred N. / Schuetz, Philipp	Uniformity and mechanical properties of dense asphalt concrete with steel wool fibers	107-117
Safi, Brahim / Saidi, Mohammed / Aboutaleb, Djamila / Maallem, Madani	The use of plastic waste as fine aggregate in the self-compacting mortars: Effect on physical and mechanical properties	436-442
Bhutta, Muhammad Aamer Rafique / Maruya, Tsuyoshi / Tsuruta, Ken	Use of polymer-impregnated concrete permanent form in marine environment: 10-year outdoor exposure in Saudi Arabia	50-57
Abdou, A. / Budaiwi, I.	The variation of thermal conductivity of fibrous insulation materials under different levels of moisture content	533-544

Informations
sur cette fiche
IssueID
22509
Publié(e) le:
16.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - juin 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - juin 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.