Construction and Building Materials - April 2013

Published:	April 2013

Articles in this Issue

Author(s)	Title	Page(s)
Rashad, Alaa M.	Alkali-activated metakaolin: A short guide for civil Engineer – An overview	751-765
Pulngern, T. / Chimkhlai, A. / Rosarpitak, V. / Sombatsompop, N.	Analytical, numerical and experimental investigations on flexural strengthening for wood/PVC composite members using flat bar strips	545-556
Ji, Xiaoping / Zheng, Nanxiang / Hou, Yueqin / Niu, Sisheng	Application of asphalt mixture shear strength to evaluate pavement rutting with accelerated loading facility (ALF)	1-8
Kim, Myung-Yu / Yang, Eun-ik / Yi, Seong-Tae	Application of the colorimetric method to chloride diffusion evaluation in concrete structures	239-245
Parisi, Fulvio / Augenti, Nicola	Assessment of unreinforced masonry cross sections under eccentric compression accounting for strain softening	654-664
Pop, Ioan / De Schutter, Geert / Desnerck, Pieter / Oneţ, Traian	Bond between powder type self-compacting concrete and steel reinforcement	824-833
Pineda, P. / Robador, M. D. / Perez-Rodriguez, J. L.	Characterization and repair measures of the medieval building materials of a Hispanic–Islamic construction	612-633
Gao, Yun / De Schutter, Geert / Ye, Guang / Huang, Haoliang / Tan, Zhijun / Wu, Kai	Characterization of ITZ in ternary blended cementitious composites: Experiment and simulation	742-750
Valipour, Mahdi / Pargar, Farhad / Shekarchi, Mohammad / Khani, Sara	Comparing a natural pozzolan, zeolite, to metakaolin and silica fume in terms of their effect on the durability characteristics of concrete: A laboratory study	879-888
Cao, Weidong / Liu, Shutang / Feng, Zhigang	Comparison of performance of stone matrix asphalt mixtures using basalt and limestone aggregates	474-479
André, A. / Kliger, R. / Olsson, R.	Compression failure mechanism in small-scale wood specimens reinforced with CFRP: An experimental study	790-800
Zheng, Wenzhong / Luo, Baifu / Wang, Ying	Compressive and tensile properties of reactive powder concrete with steel fibres at elevated temperatures	844-851
Gonzalez-Longo, Cristina / Theodossopoulos, Dimitris	Construction and materials in the stratification of S. Maria Nova (S. Francesca Romana) at the Roman Forum	926-941
Sugrañez, R. / Alvarez, J. I. / Cruz-Yusta, M. / Mármol, I. / Morales, J. / Sanchez, L.	Controlling microstructure in cement based mortars by adjusting the particle size distribution of the raw materials	139-145
Gavela, S. / Ntziouni, A. / Rakanta, E. / Kouloumbi, N. / Kasselouri-Rigopoulou, V.	Corrosion behaviour of steel rebars in reinforced concrete containing thermoplastic wastes as aggregates	419-426
Castellazzi, G. / Colla, C. / de Miranda, S. / Formica, G. / Gabrielli, E. / Molari, L. / Ubertini, F.	A coupled multiphase model for hygrothermal analysis of masonry structures and prediction of stress induced by salt crystallization	717-731
Xiao, Y. / van de Ven, M. F. C. / Molenaar, A. A. A. / Su, Z. / Chang, K.	Design approach for epoxy modified bitumen to be used in antiskid surfaces on asphalt pavement	516-525
Cyr, Martin / Trinh, Minh / Husson, Bernard / Casaux-Ginestet, Géraldine	Design of eco-efficient grouts intended for soil nailing	857-867
Dang, Tuan Anh / Kamali-Bernard, Siham / Prince, William Agbodjan	Design of new blended cement based on marine dredged sediment	602-611
Mascia, Nilson Tadeu / Nicolas, Elias Antonio	Determination of Poisson's ratios in relation to fiber angle of a tropical wood species	691-696
Gao, Yuan / Zhang, Jun / Han, Po	Determination of stress relaxation parameters of concrete in tension at early-age by ring test	152-164
Aktaş, Bekir / Karaşahin, Mustafa / Tiğdemir, Mesut	Developing a macrotexture prediction model for chip seals	784-789
Sideris, Kosmas K. / Anagnostopoulos, Nikolaos S.	Durability of normal strength self-compacting concretes and their impact on service life of reinforced concrete structures	491-497
Wen, Xiao-dong / Tu, Jian-long / Gan, Wei-zhong	Durability protection of the functionally graded structure concrete in the splash zone	246-251
Yoo, Doo-Yeol / Park, Jung-Jun / Kim, Sung-Wook / Yoon, Young-Soo	Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete	427-438
Sfikas, Ioannis P. / Trezos, Konstantinos G.	Effect of composition variations on bond properties of Self-Compacting Concrete specimens	252-262
Karakoç, Mehmet Burhan	Effect of cooling regimes on compressive strength of concrete with lightweight aggregate exposed to high temperature	21-25
Maslehuddin, M. / Ibrahim, M. / Shameem, M. / Ali, M. R. / Al-Mehthel, M. H.	Effect of curing methods on shrinkage and corrosion resistance of concrete	634-641
Shariq, Mohd. / Prasad, Jagdish / Abbas, H.	Effect of GGBFS on age dependent static modulus of elasticity of concrete	411-418
Miàs, C. / Torres, Ll / Turon, A. / Sharaky, I. A.	Effect of material properties on long-term deflections of GFRP reinforced concrete beams	99-108
Soliman, A. M. / Nehdi, M. L.	Effect of partially hydrated cementitious materials and superabsorbent polymer on early-age shrinkage of UHPC	270-275
Panda, K. C. / Bhattacharyya, S. K. / Barai, S. V.	Effect of transverse steel on the performance of RC T-beams strengthened in shear zone with GFRP sheet	79-90
Yousefi, Azam / Allahverdi, Ali / Hejazi, Parisa	Effective dispersion of nano-TiO2 powder for enhancement of photocatalytic properties in cement mixes	224-230
Tosun-Felekoğlu, Kamile / Felekoğlu, Burak	Effects of fibre hybridization on multiple cracking potential of cement-based composites under flexural loading	15-20
Yazici, Şemsi / Arel, Hasan Şahan / Tabak, Volkan	The effects of impact loading on the mechanical properties of the SFRCs	68-72
Demie, Samuel / Nuruddin, Muhd Fadhil / Shafiq, Nasir	Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete	91-98
Baščarević, Zvezdana / Komljenović, Miroslav / Miladinović, Zoran / Nikolić, Violeta / Marjanović, Nataša / Žujović, Zoran / Petrović, Rada	Effects of the concentrated NH4NO3 solution on mechanical properties and structure of the fly ash based geopolymers	570-579
Chen, Leilei / Qian, Zhendong / Hu, Hanzhou	Epoxy asphalt concrete protective course used on steel railway bridge	125-130
Xue, Qiang / Feng, Xia-Ting / Liu, Lei / Chen, Yi-jun / Liu, Xiao-Li	Evaluation of pavement straw composite fiber on SMA pavement performances	834-843
Sengul, Celaleddin E. / Oruç, Şeref / Iskender, Erol / Aksoy, Atakan	Evaluation of SBS modified stone mastic asphalt pavement performance	777-783
Santagata, Ezio / Baglieri, Orazio / Tsantilis, Lucia / Dalmazzo, Davide	Evaluation of self healing properties of bituminous binders taking into account steric hardening effects	60-67
Vázquez, P. / Alonso, F. J. / Carrizo, L. / Molina, E. / Cultrone, G. / Blanco, M. / Zamora, I.	Evaluation of the petrophysical properties of sedimentary building stones in order to establish quality criteria	868-878
Łaźniewska-Piekarczyk, Beata	Examining the possibility to estimate the influence of admixtures on pore structure of self-compacting concrete using the air void analyzer	374-387
Biolzi, L. / Ghittoni, C. / Fedele, R. / Rosati, G.	Experimental and theoretical issues in FRP-concrete bonding	182-190
Ali, Majid / Chouw, Nawawi	Experimental investigations on coconut-fibre rope tensile strength and pullout from coconut fibre reinforced concrete	681-690
Akhtarpour, Ali / Khodaii, Ali	Experimental study of asphaltic concrete dynamic properties as an impervious core in embankment dams	319-334
Vereecken, Evy / Roels, Staf	Hygric performance of a massive masonry wall: How do the mortar joints influence the moisture flux?	697-707
Jerman, Miloš / Keppert, Martin / Výborný, Jaroslav / Černý, Robert	Hygric, thermal and durability properties of autoclaved aerated concrete	352-359
Mirza, Jahangir / Bhutta, Muhammad Aamer Rafique / Tahir, Mahmood Md.	In situ performance of field-moulded joint sealants in dams	889-896
Liu, Quantao / Wu, Shaopeng / Schlangen, Erik	Induction heating of asphalt mastic for crack control	345-351
Łaźniewska-Piekarczyk, Beata	The influence of admixtures type on the air-voids parameters of non-air-entrained and air-entrained high performance SCC	109-124
Dils, J. / Boel, V. / De Schutter, G.	Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC	455-463
Wang, Yanping / Ye, Jiaofeng / Liu, Yanhua / Qiang, Xiaohu / Feng, Libang	Influence of freeze–thaw cycles on properties of asphalt-modified epoxy repair materials	580-585
Bean Popehn, Jennifer R. / Schultz, Arturo E.	Influence of imperfections on the out-of-plane flexural strength of post-tensioned masonry walls	942-949
Lee, Chin-Hyung / Chang, Kyong-Ho	Influence of the residual stresses and distortions on the structural behavior of girth-welded cylindrical steel members	766-776
Agar-Ozbek, Ayda S. / Weerheijm, Jaap / Schlangen, Erik / Van Breugel, Klaas	Investigating porous concrete with improved strength: Testing at different scales	480-490
Fatiguso, F. / Scioti, A. / De Fino, M. / de Tommasi, G.	Investigation and conservation of artificial stone facades of the early XX century: A case study	26-36
Aydın, Ferhat / Saribiyik, Mehmet	Investigation of flexural behaviors of hybrid beams formed with GFRP box section and concrete	563-569
Arabani, M. / Kamboozia, N.	The linear visco-elastic behaviour of glasphalt mixture under dynamic loading conditions	594-601
Bal, Harouna / Jannot, Yves / Gaye, Salif / Demeurie, Frank	Measurement and modelisation of the thermal conductivity of a wet composite porous medium: Laterite based bricks with millet waste additive	586-593
Pereira, Simão M. S. / Oliveira, Joel R. M. / Freitas, Elisabete F. / Machado, Pedro	Mechanical performance of asphalt mixtures produced with cork or rubber granulates as aggregate partial substitutes	209-215
Alani, Amir M. / Beckett, Derrick	Mechanical properties of a large scale synthetic fibre reinforced concrete ground slab	335-344
Wang, Ru / Yao, Lijuan / Wang, Peiming	Mechanism analysis and effect of styrene–acrylate copolymer powder on cement hydrates	538-544
Qin, Xiantao / Zhu, Siyue / Chen, Shuanfa / Deng, Kunyao	The mechanism of flame and smoke retardancy of asphalt mortar containing composite flame retardant material	852-856
Abu Al-Rub, Rashid K. / Darabi, Masoud K. / Kim, Sun-Myung / Little, Dallas N. / Glover, Charles J.	Mechanistic-based constitutive modeling of oxidative aging in aging-susceptible materials and its effect on the damage potential of asphalt concrete	439-454
Rashad, Alaa M.	Metakaolin as cementitious material: History, scours, production and composition – A comprehensive overview	303-318
Hughes, P. / Fairhurst, D. / Sherrington, I. / Renevier, N. / Morton, L. H. G. / Robery, P. C. / Cunningham, L.	Microscopic examination of a new mechanism for accelerated degradation of synthetic fibre reinforced marine concrete	498-504
Hung, Chung-Chan / Su, Yen-Fang / Yu, Kun-Hao	Modeling the shear hysteretic response for high performance fiber reinforced cementitious composites	37-48
Saldanha, Rui / Júlio, Eduardo / Dias-da-Costa, Daniel / Santos, Pedro	A modified slant shear test designed to enforce adhesive failure	673-680
Meghlat, E-M. / Oudjene, M. / Ait-Aider, H. / Batoz, J-L.	A new approach to model nailed and screwed timber joints using the finite element method	263-269
Sousa, Pedro / Kassem, Emad / Masad, Eyad / Little, Dallas	New design method of fine aggregates mixtures and automated method for analysis of dynamic mechanical characterization data	216-223
Kashani, Mohammad M. / Crewe, Adam J. / Alexander, Nicholas A.	Nonlinear cyclic response of corrosion-damaged reinforcing bars with the effect of buckling	388-400
Mechtcherine, Viktor	Novel cement-based composites for the strengthening and repair of concrete structures	365-373
Kou, Shi-Cong / Poon, Chi-Sun	A novel polymer concrete made with recycled glass aggregates, fly ash and metakaolin	146-151
Medeiros, P. / Vasconcelos, G. / Lourenço, P. B. / Gouveia, J.	Numerical modelling of non-confined and confined masonry walls	968-976
Mymrine, V. / Ponte, M. J. J. S. / Ponte, H. A. / Kaminari, N. M. S. / Pawlowsky, U. / Solyon, G. J. P.	Oily diatomite and galvanic wastes as raw materials for red ceramics fabrication	360-364
Ying, Jingwei / Xiao, Jianzhuang / Tam, Vivian W. Y.	On the variability of chloride diffusion in modelled recycled aggregate concrete	732-741
Díaz de Terán, José Ramón / Turmo, José / José Jorquera, Juan / Barragán, Bryan E. / Ramos, Gonzalo / Aparicio, Ángel Carlos	Optimization of in situ construction of concrete decks: Flexure tests of compact splices of reinforcement between phases	191-203
Pelà, Luca / Cervera, Miguel / Roca, Pere	An orthotropic damage model for the analysis of masonry structures	957-967
Yang, Zuan / Cheng, Xiaohui	A performance study of high-strength microbial mortar produced by low pressure grouting for the reinforcement of deteriorated masonry structures	505-515
Wang, Yuli / Jin, Zuquan / Liu, Suxia / Yang, Lei / Luo, Shuqiong	Physical filling effect of aggregate micro fines in cement concrete	812-814
Martínez-Barrera, Gonzalo / Menchaca-Campos, Carmina / Gencel, Osman	Polyester polymer concrete: Effect of the marble particle sizes and high gamma radiation doses	204-208
Adewole, Kazeem K. / Bull, Steve J.	Prediction of the fracture performance of defect-free steel bars for civil engineering applications using finite element simulation	9-14
Luo, Zhe / Xiao, Feipeng / Hu, Shaowei / Yang, Yanshuang	Probabilistic analysis on fatigue life of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement	401-410
Kim, Yail J. / Hossain, Mozahid / Zhang, Jun	A probabilistic investigation into deterioration of CFRP–concrete interface in aggressive environments	49-59
Shakir, Alaa A. / Naganathan, Sivakumar / Mustapha, Kamal Nasharuddin	Properties of bricks made using fly ash, quarry dust and billet scale	131-138
Akhaveissy, A. H. / Milani, G.	Pushover analysis of large scale unreinforced masonry structures by means of a fully 2D non-linear model	276-295
Dony, A. / Colin, J. / Bruneau, D. / Drouadaine, I. / Navaro, J.	Reclaimed asphalt concretes with high recycling rates: Changes in reclaimed binder properties according to rejuvenating agent	175-181
Sideris, K. K. / Manita, P.	Residual mechanical characteristics and spalling resistance of fiber reinforced self-compacting concretes exposed to elevated temperatures	296-302
Theodossopoulos, Dimitris / Sinha, Braj	A review of analytical methods in the current design processes and assessment of performance of masonry structures	990-1001
Zapata, L. E. / Portela, G. / Suárez, O. M. / Carrasquillo, O.	Rheological performance and compressive strength of superplasticized cementitious mixtures with micro/nano-SiO2 additions	708-716
Sadek, H. / Lissel, S.	Seismic performance of masonry walls with GFRP and Geogrid Bed joint reinforcement	977-989
Osei-Antwi, Michael / De Castro, Julia / Vassilopoulos, Anastasios P. / Keller, Thomas	Shear mechanical characterization of balsa wood as core material of composite sandwich panels	231-238
Garcia, Maria da Luz / Sousa-Coutinho, Joana	Strength and durability of cement with forest waste bottom ash	897-910
Singh, Maninder / Kumar, Praveen / Maurya, Mannan Rai	Strength characteristics of SBS modified asphalt mixes with various aggregates	815-823
Kang, Juntao / Wang, Xuefeng / Yang, Jian / Du, Yingang	Strengthening double curved arch bridges by using extrados section augmentation method	165-174
Manalo, Allan	Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and Magnesium Oxide board	642-653
Yung, Wang Her / Yung, Lin Chin / Hua, Lee Hsien	A study of the durability properties of waste tire rubber applied to self-compacting concrete	665-672
Wang, Her-Yung / Chen, Bo-Tsun / Wu, Yu-Wu	A study of the fresh properties of controlled low-strength rubber lightweight aggregate concrete (CLSRLC)	526-531
Wang, Her-Yung / Kuo, Wen-Ten / Lin, Chih-Chung / Po-Yo, Chen	Study of the material properties of fly ash added to oyster cement mortar	532-537
Larrambebere, Gonzalo	Summer Theatre	918-925
Agoua, Eusèbe / Allognon-Houessou, Elisabeth / Adjovi, Edmond / Togbedji, Bovis	Thermal conductivity of composites made of wastes of wood and expanded polystyrene	557-562
Frances, Rosa	The three-arched middle Bronze Age gate at Tel Dan - A structural investigation of an extraordinary archaeological site	950-956
Gong, Meng / Delahunty, Stephen / Chui, Y. H. / Li, Ling	Use of low grade hardwoods for fabricating laminated railway ties	73-78
Sukontasukkul, Piti / Jamnam, Sittisak / Rodsin, Kittipoom / Banthia, Nemkumar	Use of rubberized concrete as a cushion layer in bulletproof fiber reinforced concrete panels	801-811
Kizinievič, Olga / Žurauskienė, Ramunė / Kizinievič, Viktor / Žurauskas, Rimvydas	Utilisation of sludge waste from water treatment for ceramic products	464-473
Colas, Anne-Sophie / Garnier, Denis / Morel, Jean-Claude	Yield design modelling of dry joint retaining structures	912-917

About this
data sheet
IssueID
22507
Published on:
16/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - April 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - April 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.