Construction and Building Materials - April 2013

Erschienen:	April 2013

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Rashad, Alaa M.	Alkali-activated metakaolin: A short guide for civil Engineer – An overview	751-765
Pulngern, T. / Chimkhlai, A. / Rosarpitak, V. / Sombatsompop, N.	Analytical, numerical and experimental investigations on flexural strengthening for wood/PVC composite members using flat bar strips	545-556
Ji, Xiaoping / Zheng, Nanxiang / Hou, Yueqin / Niu, Sisheng	Application of asphalt mixture shear strength to evaluate pavement rutting with accelerated loading facility (ALF)	1-8
Kim, Myung-Yu / Yang, Eun-ik / Yi, Seong-Tae	Application of the colorimetric method to chloride diffusion evaluation in concrete structures	239-245
Parisi, Fulvio / Augenti, Nicola	Assessment of unreinforced masonry cross sections under eccentric compression accounting for strain softening	654-664
Pop, Ioan / De Schutter, Geert / Desnerck, Pieter / Oneţ, Traian	Bond between powder type self-compacting concrete and steel reinforcement	824-833
Pineda, P. / Robador, M. D. / Perez-Rodriguez, J. L.	Characterization and repair measures of the medieval building materials of a Hispanic–Islamic construction	612-633
Gao, Yun / De Schutter, Geert / Ye, Guang / Huang, Haoliang / Tan, Zhijun / Wu, Kai	Characterization of ITZ in ternary blended cementitious composites: Experiment and simulation	742-750
Valipour, Mahdi / Pargar, Farhad / Shekarchi, Mohammad / Khani, Sara	Comparing a natural pozzolan, zeolite, to metakaolin and silica fume in terms of their effect on the durability characteristics of concrete: A laboratory study	879-888
Cao, Weidong / Liu, Shutang / Feng, Zhigang	Comparison of performance of stone matrix asphalt mixtures using basalt and limestone aggregates	474-479
André, A. / Kliger, R. / Olsson, R.	Compression failure mechanism in small-scale wood specimens reinforced with CFRP: An experimental study	790-800
Zheng, Wenzhong / Luo, Baifu / Wang, Ying	Compressive and tensile properties of reactive powder concrete with steel fibres at elevated temperatures	844-851
Gonzalez-Longo, Cristina / Theodossopoulos, Dimitris	Construction and materials in the stratification of S. Maria Nova (S. Francesca Romana) at the Roman Forum	926-941
Sugrañez, R. / Alvarez, J. I. / Cruz-Yusta, M. / Mármol, I. / Morales, J. / Sanchez, L.	Controlling microstructure in cement based mortars by adjusting the particle size distribution of the raw materials	139-145
Gavela, S. / Ntziouni, A. / Rakanta, E. / Kouloumbi, N. / Kasselouri-Rigopoulou, V.	Corrosion behaviour of steel rebars in reinforced concrete containing thermoplastic wastes as aggregates	419-426
Castellazzi, G. / Colla, C. / de Miranda, S. / Formica, G. / Gabrielli, E. / Molari, L. / Ubertini, F.	A coupled multiphase model for hygrothermal analysis of masonry structures and prediction of stress induced by salt crystallization	717-731
Xiao, Y. / van de Ven, M. F. C. / Molenaar, A. A. A. / Su, Z. / Chang, K.	Design approach for epoxy modified bitumen to be used in antiskid surfaces on asphalt pavement	516-525
Cyr, Martin / Trinh, Minh / Husson, Bernard / Casaux-Ginestet, Géraldine	Design of eco-efficient grouts intended for soil nailing	857-867
Dang, Tuan Anh / Kamali-Bernard, Siham / Prince, William Agbodjan	Design of new blended cement based on marine dredged sediment	602-611
Mascia, Nilson Tadeu / Nicolas, Elias Antonio	Determination of Poisson's ratios in relation to fiber angle of a tropical wood species	691-696
Gao, Yuan / Zhang, Jun / Han, Po	Determination of stress relaxation parameters of concrete in tension at early-age by ring test	152-164
Aktaş, Bekir / Karaşahin, Mustafa / Tiğdemir, Mesut	Developing a macrotexture prediction model for chip seals	784-789
Sideris, Kosmas K. / Anagnostopoulos, Nikolaos S.	Durability of normal strength self-compacting concretes and their impact on service life of reinforced concrete structures	491-497
Wen, Xiao-dong / Tu, Jian-long / Gan, Wei-zhong	Durability protection of the functionally graded structure concrete in the splash zone	246-251
Yoo, Doo-Yeol / Park, Jung-Jun / Kim, Sung-Wook / Yoon, Young-Soo	Early age setting, shrinkage and tensile characteristics of ultra high performance fiber reinforced concrete	427-438
Sfikas, Ioannis P. / Trezos, Konstantinos G.	Effect of composition variations on bond properties of Self-Compacting Concrete specimens	252-262
Karakoç, Mehmet Burhan	Effect of cooling regimes on compressive strength of concrete with lightweight aggregate exposed to high temperature	21-25
Maslehuddin, M. / Ibrahim, M. / Shameem, M. / Ali, M. R. / Al-Mehthel, M. H.	Effect of curing methods on shrinkage and corrosion resistance of concrete	634-641
Shariq, Mohd. / Prasad, Jagdish / Abbas, H.	Effect of GGBFS on age dependent static modulus of elasticity of concrete	411-418
Miàs, C. / Torres, Ll / Turon, A. / Sharaky, I. A.	Effect of material properties on long-term deflections of GFRP reinforced concrete beams	99-108
Soliman, A. M. / Nehdi, M. L.	Effect of partially hydrated cementitious materials and superabsorbent polymer on early-age shrinkage of UHPC	270-275
Panda, K. C. / Bhattacharyya, S. K. / Barai, S. V.	Effect of transverse steel on the performance of RC T-beams strengthened in shear zone with GFRP sheet	79-90
Yousefi, Azam / Allahverdi, Ali / Hejazi, Parisa	Effective dispersion of nano-TiO2 powder for enhancement of photocatalytic properties in cement mixes	224-230
Tosun-Felekoğlu, Kamile / Felekoğlu, Burak	Effects of fibre hybridization on multiple cracking potential of cement-based composites under flexural loading	15-20
Yazici, Şemsi / Arel, Hasan Şahan / Tabak, Volkan	The effects of impact loading on the mechanical properties of the SFRCs	68-72
Demie, Samuel / Nuruddin, Muhd Fadhil / Shafiq, Nasir	Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete	91-98
Baščarević, Zvezdana / Komljenović, Miroslav / Miladinović, Zoran / Nikolić, Violeta / Marjanović, Nataša / Žujović, Zoran / Petrović, Rada	Effects of the concentrated NH4NO3 solution on mechanical properties and structure of the fly ash based geopolymers	570-579
Chen, Leilei / Qian, Zhendong / Hu, Hanzhou	Epoxy asphalt concrete protective course used on steel railway bridge	125-130
Xue, Qiang / Feng, Xia-Ting / Liu, Lei / Chen, Yi-jun / Liu, Xiao-Li	Evaluation of pavement straw composite fiber on SMA pavement performances	834-843
Sengul, Celaleddin E. / Oruç, Şeref / Iskender, Erol / Aksoy, Atakan	Evaluation of SBS modified stone mastic asphalt pavement performance	777-783
Santagata, Ezio / Baglieri, Orazio / Tsantilis, Lucia / Dalmazzo, Davide	Evaluation of self healing properties of bituminous binders taking into account steric hardening effects	60-67
Vázquez, P. / Alonso, F. J. / Carrizo, L. / Molina, E. / Cultrone, G. / Blanco, M. / Zamora, I.	Evaluation of the petrophysical properties of sedimentary building stones in order to establish quality criteria	868-878
Łaźniewska-Piekarczyk, Beata	Examining the possibility to estimate the influence of admixtures on pore structure of self-compacting concrete using the air void analyzer	374-387
Biolzi, L. / Ghittoni, C. / Fedele, R. / Rosati, G.	Experimental and theoretical issues in FRP-concrete bonding	182-190
Ali, Majid / Chouw, Nawawi	Experimental investigations on coconut-fibre rope tensile strength and pullout from coconut fibre reinforced concrete	681-690
Akhtarpour, Ali / Khodaii, Ali	Experimental study of asphaltic concrete dynamic properties as an impervious core in embankment dams	319-334
Vereecken, Evy / Roels, Staf	Hygric performance of a massive masonry wall: How do the mortar joints influence the moisture flux?	697-707
Jerman, Miloš / Keppert, Martin / Výborný, Jaroslav / Černý, Robert	Hygric, thermal and durability properties of autoclaved aerated concrete	352-359
Mirza, Jahangir / Bhutta, Muhammad Aamer Rafique / Tahir, Mahmood Md.	In situ performance of field-moulded joint sealants in dams	889-896
Liu, Quantao / Wu, Shaopeng / Schlangen, Erik	Induction heating of asphalt mastic for crack control	345-351
Łaźniewska-Piekarczyk, Beata	The influence of admixtures type on the air-voids parameters of non-air-entrained and air-entrained high performance SCC	109-124
Dils, J. / Boel, V. / De Schutter, G.	Influence of cement type and mixing pressure on air content, rheology and mechanical properties of UHPC	455-463
Wang, Yanping / Ye, Jiaofeng / Liu, Yanhua / Qiang, Xiaohu / Feng, Libang	Influence of freeze–thaw cycles on properties of asphalt-modified epoxy repair materials	580-585
Bean Popehn, Jennifer R. / Schultz, Arturo E.	Influence of imperfections on the out-of-plane flexural strength of post-tensioned masonry walls	942-949
Lee, Chin-Hyung / Chang, Kyong-Ho	Influence of the residual stresses and distortions on the structural behavior of girth-welded cylindrical steel members	766-776
Agar-Ozbek, Ayda S. / Weerheijm, Jaap / Schlangen, Erik / Van Breugel, Klaas	Investigating porous concrete with improved strength: Testing at different scales	480-490
Fatiguso, F. / Scioti, A. / De Fino, M. / de Tommasi, G.	Investigation and conservation of artificial stone facades of the early XX century: A case study	26-36
Aydın, Ferhat / Saribiyik, Mehmet	Investigation of flexural behaviors of hybrid beams formed with GFRP box section and concrete	563-569
Arabani, M. / Kamboozia, N.	The linear visco-elastic behaviour of glasphalt mixture under dynamic loading conditions	594-601
Bal, Harouna / Jannot, Yves / Gaye, Salif / Demeurie, Frank	Measurement and modelisation of the thermal conductivity of a wet composite porous medium: Laterite based bricks with millet waste additive	586-593
Pereira, Simão M. S. / Oliveira, Joel R. M. / Freitas, Elisabete F. / Machado, Pedro	Mechanical performance of asphalt mixtures produced with cork or rubber granulates as aggregate partial substitutes	209-215
Alani, Amir M. / Beckett, Derrick	Mechanical properties of a large scale synthetic fibre reinforced concrete ground slab	335-344
Wang, Ru / Yao, Lijuan / Wang, Peiming	Mechanism analysis and effect of styrene–acrylate copolymer powder on cement hydrates	538-544
Qin, Xiantao / Zhu, Siyue / Chen, Shuanfa / Deng, Kunyao	The mechanism of flame and smoke retardancy of asphalt mortar containing composite flame retardant material	852-856
Abu Al-Rub, Rashid K. / Darabi, Masoud K. / Kim, Sun-Myung / Little, Dallas N. / Glover, Charles J.	Mechanistic-based constitutive modeling of oxidative aging in aging-susceptible materials and its effect on the damage potential of asphalt concrete	439-454
Rashad, Alaa M.	Metakaolin as cementitious material: History, scours, production and composition – A comprehensive overview	303-318
Hughes, P. / Fairhurst, D. / Sherrington, I. / Renevier, N. / Morton, L. H. G. / Robery, P. C. / Cunningham, L.	Microscopic examination of a new mechanism for accelerated degradation of synthetic fibre reinforced marine concrete	498-504
Hung, Chung-Chan / Su, Yen-Fang / Yu, Kun-Hao	Modeling the shear hysteretic response for high performance fiber reinforced cementitious composites	37-48
Saldanha, Rui / Júlio, Eduardo / Dias-da-Costa, Daniel / Santos, Pedro	A modified slant shear test designed to enforce adhesive failure	673-680
Meghlat, E-M. / Oudjene, M. / Ait-Aider, H. / Batoz, J-L.	A new approach to model nailed and screwed timber joints using the finite element method	263-269
Sousa, Pedro / Kassem, Emad / Masad, Eyad / Little, Dallas	New design method of fine aggregates mixtures and automated method for analysis of dynamic mechanical characterization data	216-223
Kashani, Mohammad M. / Crewe, Adam J. / Alexander, Nicholas A.	Nonlinear cyclic response of corrosion-damaged reinforcing bars with the effect of buckling	388-400
Mechtcherine, Viktor	Novel cement-based composites for the strengthening and repair of concrete structures	365-373
Kou, Shi-Cong / Poon, Chi-Sun	A novel polymer concrete made with recycled glass aggregates, fly ash and metakaolin	146-151
Medeiros, P. / Vasconcelos, G. / Lourenço, P. B. / Gouveia, J.	Numerical modelling of non-confined and confined masonry walls	968-976
Mymrine, V. / Ponte, M. J. J. S. / Ponte, H. A. / Kaminari, N. M. S. / Pawlowsky, U. / Solyon, G. J. P.	Oily diatomite and galvanic wastes as raw materials for red ceramics fabrication	360-364
Ying, Jingwei / Xiao, Jianzhuang / Tam, Vivian W. Y.	On the variability of chloride diffusion in modelled recycled aggregate concrete	732-741
Díaz de Terán, José Ramón / Turmo, José / José Jorquera, Juan / Barragán, Bryan E. / Ramos, Gonzalo / Aparicio, Ángel Carlos	Optimization of in situ construction of concrete decks: Flexure tests of compact splices of reinforcement between phases	191-203
Pelà, Luca / Cervera, Miguel / Roca, Pere	An orthotropic damage model for the analysis of masonry structures	957-967
Yang, Zuan / Cheng, Xiaohui	A performance study of high-strength microbial mortar produced by low pressure grouting for the reinforcement of deteriorated masonry structures	505-515
Wang, Yuli / Jin, Zuquan / Liu, Suxia / Yang, Lei / Luo, Shuqiong	Physical filling effect of aggregate micro fines in cement concrete	812-814
Martínez-Barrera, Gonzalo / Menchaca-Campos, Carmina / Gencel, Osman	Polyester polymer concrete: Effect of the marble particle sizes and high gamma radiation doses	204-208
Adewole, Kazeem K. / Bull, Steve J.	Prediction of the fracture performance of defect-free steel bars for civil engineering applications using finite element simulation	9-14
Luo, Zhe / Xiao, Feipeng / Hu, Shaowei / Yang, Yanshuang	Probabilistic analysis on fatigue life of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement	401-410
Kim, Yail J. / Hossain, Mozahid / Zhang, Jun	A probabilistic investigation into deterioration of CFRP–concrete interface in aggressive environments	49-59
Shakir, Alaa A. / Naganathan, Sivakumar / Mustapha, Kamal Nasharuddin	Properties of bricks made using fly ash, quarry dust and billet scale	131-138
Akhaveissy, A. H. / Milani, G.	Pushover analysis of large scale unreinforced masonry structures by means of a fully 2D non-linear model	276-295
Dony, A. / Colin, J. / Bruneau, D. / Drouadaine, I. / Navaro, J.	Reclaimed asphalt concretes with high recycling rates: Changes in reclaimed binder properties according to rejuvenating agent	175-181
Sideris, K. K. / Manita, P.	Residual mechanical characteristics and spalling resistance of fiber reinforced self-compacting concretes exposed to elevated temperatures	296-302
Theodossopoulos, Dimitris / Sinha, Braj	A review of analytical methods in the current design processes and assessment of performance of masonry structures	990-1001
Zapata, L. E. / Portela, G. / Suárez, O. M. / Carrasquillo, O.	Rheological performance and compressive strength of superplasticized cementitious mixtures with micro/nano-SiO2 additions	708-716
Sadek, H. / Lissel, S.	Seismic performance of masonry walls with GFRP and Geogrid Bed joint reinforcement	977-989
Osei-Antwi, Michael / De Castro, Julia / Vassilopoulos, Anastasios P. / Keller, Thomas	Shear mechanical characterization of balsa wood as core material of composite sandwich panels	231-238
Garcia, Maria da Luz / Sousa-Coutinho, Joana	Strength and durability of cement with forest waste bottom ash	897-910
Singh, Maninder / Kumar, Praveen / Maurya, Mannan Rai	Strength characteristics of SBS modified asphalt mixes with various aggregates	815-823
Kang, Juntao / Wang, Xuefeng / Yang, Jian / Du, Yingang	Strengthening double curved arch bridges by using extrados section augmentation method	165-174
Manalo, Allan	Structural behaviour of a prefabricated composite wall system made from rigid polyurethane foam and Magnesium Oxide board	642-653
Yung, Wang Her / Yung, Lin Chin / Hua, Lee Hsien	A study of the durability properties of waste tire rubber applied to self-compacting concrete	665-672
Wang, Her-Yung / Chen, Bo-Tsun / Wu, Yu-Wu	A study of the fresh properties of controlled low-strength rubber lightweight aggregate concrete (CLSRLC)	526-531
Wang, Her-Yung / Kuo, Wen-Ten / Lin, Chih-Chung / Po-Yo, Chen	Study of the material properties of fly ash added to oyster cement mortar	532-537
Larrambebere, Gonzalo	Summer Theatre	918-925
Agoua, Eusèbe / Allognon-Houessou, Elisabeth / Adjovi, Edmond / Togbedji, Bovis	Thermal conductivity of composites made of wastes of wood and expanded polystyrene	557-562
Frances, Rosa	The three-arched middle Bronze Age gate at Tel Dan - A structural investigation of an extraordinary archaeological site	950-956
Gong, Meng / Delahunty, Stephen / Chui, Y. H. / Li, Ling	Use of low grade hardwoods for fabricating laminated railway ties	73-78
Sukontasukkul, Piti / Jamnam, Sittisak / Rodsin, Kittipoom / Banthia, Nemkumar	Use of rubberized concrete as a cushion layer in bulletproof fiber reinforced concrete panels	801-811
Kizinievič, Olga / Žurauskienė, Ramunė / Kizinievič, Viktor / Žurauskas, Rimvydas	Utilisation of sludge waste from water treatment for ceramic products	464-473
Colas, Anne-Sophie / Garnier, Denis / Morel, Jean-Claude	Yield design modelling of dry joint retaining structures	912-917

Über diese
Datenseite
IssueID
22507
Veröffentlicht am:
16.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - April 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - April 2013

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.