Construction and Building Materials - March 2013

Published:	March 2013

Articles in this Issue

Author(s)	Title	Page(s)
Yardim, Yavuz / Waleed, A. M. T. / Jaafar, Mohd. Saleh / Laseima, Saleh	AAC-concrete light weight precast composite floor slab	405-410
Radwan, M. M. / Farag, L. M. / Abo-El-Enein, S. A. / Abd El-Hamid, H. K.	Alkali activation of blended cements containing oil shale ash	367-377
Papayianni, Ioanna / Pachta, Vasiliki / Stefanidou, Maria	Analysis of ancient mortars and design of compatible repair mortars: The case study of Odeion of the archaeological site of Dion	84-92
Amadore, Antonio / Bosurgi, Gaetano / Pellegrino, Orazio	Analysis of hot mix asphalt compaction data by means of fuzzy clustering techniques	430-437
Galvín, Adela P. / Ayuso, Jesús / Agrela, Francisco / Barbudo, Auxiliadora / Jiménez, José Ramón	Analysis of leaching procedures for environmental risk assessment of recycled aggregate use in unpaved roads	1207-1214
Bołtryk, Michał / Małaszkiewicz, Dorota	Application of anionic asphalt emulsion as an admixture for concrete	556-565
Mashrei, Mohammed A. / Seracino, R. / Rahman, M. S.	Application of artificial neural networks to predict the bond strength of FRP-to-concrete joints	812-821
Blanco, Ana / Pujadas, Pablo / de la Fuente, Albert / Cavalaro, Sergio / Aguado, Antonio	Application of constitutive models in European codes to RC–FRC	246-259
Martín-del-Río, J. J. / Alejandre, F. J. / Márquez, G. / Blasco, F. J.	An argument for using alizarine yellow R and indigo carmine to determine in situ the degree of alkalinity in reinforced concrete	426-429
Hu, J. / Wang, K. / Gaunt, J. A.	Behavior and mix design development of concrete made with recycled aggregate from deconstructed lead-contaminated masonry materials	1184-1192
Astorga, Ariela / Santa María, Hernán / Lopez, Mauricio	Behavior of a concrete bridge cantilevered slab reinforced using NSM CFRP strips	461-472
Chi, Maochieh / Huang, Ran	Binding mechanism and properties of alkali-activated fly ash/slag mortars	291-298
Pacheco-Torgal, F. / Labrincha, J. A.	Biotech cementitious materials: Some aspects of an innovative approach for concrete with enhanced durability	1136-1141
Sena-Cruz, José / Jorge, Marco / Branco, Jorge M. / Cunha, Vítor M. C. F.	Bond between glulam and NSM CFRP laminates	260-269
Talukdar, S. / Banthia, N.	Carbonation in concrete infrastructure in the context of global climate change: Development of a service lifespan model	775-782
Rodríguez, O. / Kacimi, L. / López-Delgado, A. / Frías, M. / Guerrero, A.	Characterization of Algerian reservoir sludges for use as active additions in cement: New pozzolans for eco-cement manufacture	275-279
Khattak, Mohammad Jamal / Khattab, Ahmed / Rizvi, Hashim R.	Characterization of carbon nano-fiber modified hot mix asphalt mixtures	738-745
Kim, Sughwan / Seo, Jungki / Cha, Junghoon / Kim, Sumin	Chemical retreating for gel-typed aerogel and insulation performance of cement containing aerogel	501-505
Yodsudjai, Wanchai / Wang, Kejin	Chemical shrinkage behavior of pastes made with different types of cements	854-862
Vinai, R. / Lawane, A. / Minane, J. R. / Amadou, A.	Coal combustion residues valorisation: Research and development on compressed brick production	1088-1096
Nguyen, Thi Thanh Hien / Li, Shujun / Li, Jian	The combined effects of copper sulfate and rosin sizing agent treatment on some physical and mechanical properties of poplar wood	33-39
Arezoumandi, Mahdi / Wolfe, Michael H. / Volz, Jeffery S.	A comparative study of the bond strength of reinforcing steel in high-volume fly ash concrete and conventional concrete	919-924
Faria, Gonçalo / Chastre, Carlos / Lúcio, Válter / Nunes, Ângela	Compression behaviour of short columns made from cement-bonded particle board	60-69
Al-Hammoud, Rania / Soudki, Khaled / Topper, Timothy H.	Confinement effect on the bond behaviour of beams under static and repeated loading	934-943
Ryu, Sung Woo / Won, Hoon Ill / Choi, Seongcheol / Won, Moon C.	Continuously reinforced bonded concrete overlay of distressed jointed plain concrete pavements	1110-1117
Nguyen, Tien-Cuong / Bai, Yu / Zhao, Xiao-Ling / Al-Mahaidi, Riadh	Curing effects on steel/CFRP double strap joints under combined mechanical load, temperature and humidity	899-907
Abbasnia, R. / Hosseinpour, F. / Rostamian, M. / Ziaadiny, H.	Cyclic and monotonic behavior of FRP confined concrete rectangular prisms with different aspect ratios	118-125
Elfergani, Hisham A. / Pullin, Rhys / Holford, Karen M.	Damage assessment of corrosion in prestressed concrete by acoustic emission	925-933
Valença, J. / Gonçalves, L. M. S. / Júlio, E.	Damage assessment on concrete surfaces using multi-spectral image analysis	971-981
Aigbomian, Eboziegbe Patrick / Fan, Mizi	Development of Wood-Crete building materials from sawdust and waste paper	361-366
Briere, Vincent / Harries, Kent A. / Kasan, Jarret / Hager, Charles	Dilation behavior of seven-wire prestressing strand – The Hoyer effect	650-658
Teng, Susanto / Lim, Tze Yang Darren / Divsholi, Bahador Sabet	Durability and mechanical properties of high strength concrete incorporating ultra fine Ground Granulated Blast-furnace Slag	875-881
Thomas, C. / Setién, J. / Polanco, J. A. / Alaejos, P. / Sánchez de Juan, M.	Durability of recycled aggregate concrete	1054-1065
Sfikas, Ioannis P. / Kanellopoulos, Antonis / Trezos, Konstantinos G. / Petrou, Michael F.	Durability of similar self-compacting concrete batches produced in two different EU laboratories	207-216
Lai, W. L. / Kou, S. C. / Poon, C. S. / Tsang, W. F. / Lee, K. K.	A durability study of externally bonded FRP-concrete beams via full-field infrared thermography (IRT) and quasi-static shear test	481-491
Shiming, Shang / Yupu, Song	Dynamic biaxial tensile–compressive strength and failure criterion of plain concrete	322-329
Fantilli, Alessandro P. / Chiaia, Bernardino	Eco-mechanical performances of cement-based materials: An application to self-consolidating concrete	189-196
Padilla, Victor / Ghods, Pouria / Alfantazi, Akram	Effect of de-icing salts on the corrosion performance of galvanized steel in sulphate contaminated soil	908-918
Zhang, Henglong / Jia, Xiaojuan / Yu, Jianying / Xue, Lihui	Effect of expanded vermiculite on microstructures and aging properties of styrene–butadiene–styrene copolymer modified bitumen	224-230
Soulioti, D. V. / Barkoula, N-M. / Koutsianopoulos, F. / Charalambakis, N. / Matikas, T. E.	The effect of fibre chemical treatment on the steel fibre/cementitious matrix interface	77-83
Isikdag, Burak / Topçu, İlker Bekir	The effect of ground granulated blast-furnace slag on properties of Horasan mortar	448-454
Duong, V. B. / Sahamitmongkol, R. / Tangtermsirikul, S.	Effect of leaching on carbonation resistance and steel corrosion of cement-based materials	1066-1075
Mehdipour, Iman / Razzaghi, Mehran Seyed / Amini, Kamran / Shekarchi, Mohammad	Effect of mineral admixtures on fluidity and stability of self-consolidating mortar subjected to prolonged mixing time	1029-1037
Zhang, Henglong / Shi, Caijun / Han, Jun / Yu, Jianying	Effect of organic layered silicates on flame retardancy and aging properties of bitumen	1151-1155
Gesoǧlu, Mehmet / Güneyisi, Erhan / Alzeebaree, Radhwan / Mermerdaş, Kasım	Effect of silica fume and steel fiber on the mechanical properties of the concretes produced with cold bonded fly ash aggregates	982-990
Yazici, Şemsi / Arel, Hasan Şahan	The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs	299-305
Mehdipour, Iman / Libre, Nicolas Ali / Shekarchi, Mohammad / Khanjani, Maryam	Effect of workability characteristics on the hardened performance of FRSCCMs	611-621
Calmon, João Luiz / Tristão, Fernando Avancini / Giacometti, Marcela / Meneguelli, Marcelo / Moratti, Mirko / Teixeira, Jamilla Emi Sudo Lutif	Effects of BOF steel slag and other cementitious materials on the rheological properties of self-compacting cement pastes	1046-1053
Cuenca, J. / Rodríguez, J. / Martín-Morales, M. / Sánchez-Roldán, Z. / Zamorano, M.	Effects of olive residue biomass fly ash as filler in self-compacting concrete	702-709
Ribeiro, P. H. L. C. / Meira, G. R. / Ferreira, P. R. R. / Perazzo, N.	Electrochemical realkalisation of carbonated concretes – Influence of material characteristics and thickness of concrete reinforcement cover	280-290
Ban Cheah, Chee / Ramli, Mahyuddin	The engineering properties of high performance concrete with HCWA–DSF supplementary binder	93-103
Pereira de Oliveira, L. A. / Castro Gomes, J. P. / Bernardo, L. F. A. / Ramos, M. M. M.	Evaluation of dry mortar ratio as mix design parameter for steel fibre reinforced self compacting concrete	642-649
Li, Ling / Gong, Meng / Li, Dagang	Evaluation of the kinetic friction performance of modified wood decking products	863-868
Jitsangiam, Peerapong / Chindaprasirt, Prinya / Nikraz, Hamid	An evaluation of the suitability of SUPERPAVE and Marshall asphalt mix designs as they relate to Thailand's climatic conditions	961-970
Yeon, Jung Heum / Choi, Seongcheol / Won, Moon C.	Evaluation of zero-stress temperature prediction model for Portland cement concrete pavements	492-500
Wan, Keshu / Li, Yan / Sun, Wei	Experimental and modelling research of the accelerated calcium leaching of cement paste in ammonium nitrate solution	832-846
Almusallam, Tarek H. / Elsanadedy, Hussein M. / Al-Salloum, Yousef A. / Alsayed, Saleh H.	Experimental and numerical investigation for the flexural strengthening of RC beams using near-surface mounted steel or GFRP bars	145-161
Tsioulou, Ourania T. / Lampropoulos, Andreas P. / Dritsos, Stephanos E.	Experimental investigation of interface behaviour of RC beams strengthened with concrete layers	50-59
Yan, Libo / Chouw, Nawawi	Experimental study of flax FRP tube encased coir fibre reinforced concrete composite column	1118-1127
Lubelli, B. / van Hees, R. P. J. / Hacquebord, A.	Experimental study of the distribution of chemical products against rising damp in substrates with different water saturation degrees	891-898
Hussain, Haleem K. / Zhang, Lian Zhen / Liu, Gui Wei	An experimental study on strengthening reinforced concrete T-beams using new material poly-urethane-cement (PUC)	104-117
Nowak, Tomasz P. / Jasienko, Jerzy / Czepiżak, Dariusz	Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips	197-206
Erdem, Savaş / Blankson, Marva Angela	Fractal–fracture analysis and characterization of impact-fractured surfaces in different types of concrete using digital image analysis and 3D nanomap laser profilometery	70-76
Merta, I. / Tschegg, E. K.	Fracture energy of natural fibre reinforced concrete	991-997
Liu, Jian / Agostini, Franck / Skoczylas, Frédéric	From relative gas permeability to in situ saturation measurements	882-890
Pacheco-Torgal, F. / Labrincha, J. A.	The future of construction materials research and the seventh UN Millennium Development Goal: A few insights	729-737
Wu, Chenglin / Chen, Genda / Volz, Jeffery S. / Brow, Richard K. / Koenigstein, Michael L.	Global bond behavior of enamel-coated rebar in concrete beams with spliced reinforcement	793-801
Darquennes, Aveline / Espion, Bernard / Staquet, Stéphanie	How to assess the hydration of slag cement concretes?	1012-1020
del Coz Díaz, Juan José / Álvarez Rabanal, Felipe Pedro / García Nieto, Paulino José / Domínguez Hernández, Javier / Rodríguez Soria, Beatriz / Pérez-Bella, Jose María	Hygrothermal properties of lightweight concrete: Experiments and numerical fitting study	543-555
Wong, Leong Sing / Hashim, Roslan / Ali, Faisal	Improved strength and reduced permeability of stabilized peat: Focus on application of kaolin as a pozzolanic additive	783-792
Belferrag, Allaoua / Kriker, Abdelouahed / Khenfer, Mohamed Elmouldi	Improvement of the compressive strength of mortar in the arid climates by valorization of dune sand and pneumatic waste metal fibers	847-853
Adorni, Elisa / Coïsson, Eva / Ferretti, Daniele	In situ characterization of archaeological adobe bricks	1-9
Pereira, Victor Correia de Oliveira / Monteiro, Eliana Cristina Barreto / da Silva Almeida, Kalline	Influence of cement type in reinforcement corrosion of mortars under action of chlorides	710-718
Park, Wonjun / Noguchi, Takafumi	Influence of metal impurity on recycled aggregate concrete and inspection method for aluminum impurity	1174-1183
Chen, Xudong / Wu, Shengxing / Zhou, Jikai	Influence of porosity on compressive and tensile strength of cement mortar	869-874
Jiménez-Quero, V. G. / León-Martínez, F. M. / Montes-Garcia, P. / Gaona-Tiburcio, C. / Chacón-Nava, J. G.	Influence of sugar-cane bagasse ash and fly ash on the rheological behavior of cement pastes and mortars	691-701
Iovinella, Ivano / Prota, Andrea / Mazzotti, Claudio	Influence of surface roughness on the bond of FRP laminates to concrete	533-542
Silveira, Dora / Varum, Humberto / Costa, Aníbal	Influence of the testing procedures in the mechanical characterization of adobe bricks	719-728
Zhang, Lei / Wang, Wenwei / Lu, Qing / Chen, Xianhua	An innovative approach to determine deck pavement modulus and interfacial slip stiffness based on a composite beam model	411-418
Cong, Peiliang / Xun, Peijun / Xing, Mingliang / Chen, Shuanfa	Investigation of asphalt binder containing various crumb rubbers and asphalts	632-641
Ghourchian, Sadegh / Wyrzykowski, Mateusz / Lura, Pietro / Shekarchi, Mohammad / Ahmadi, Babak	An investigation on the use of zeolite aggregates for internal curing of concrete	135-144
Shen, Yan / Qian, Jueshi / Zhang, Zhiwei	Investigations of anhydrite in CFBC fly ash as cement retarders	672-678
Ameri, Mahmoud / Mansourian, Ahmad / Sheikhmotevali, Amir Hossein	Laboratory evaluation of ethylene vinyl acetate modified bitumens and mixtures based upon performance related parameters	438-447
Babaizadeh, Hamed / Hassan, Marwa	Life cycle assessment of nano-sized titanium dioxide coating on residential windows	314-321
López Gayarre, F. / López-Colina, C. / Serrano, M. A. / López-Martínez, A.	Manufacture of concrete kerbs and floor blocks with recycled aggregate from C&DW	1193-1199
Chabot, A. / Hun, M. / Hammoum, F.	Mechanical analysis of a mixed mode debonding test for "composite" pavements	1076-1087
Kalla, Pawan / Misra, Anurag / Gupta, Ramesh Chandra / Csetenyi, Laszlo / Gahlot, Vimal / Arora, Amarnath	Mechanical and durability studies on concrete containing wollastonite–fly ash combination	1142-1150
Cao, Mingli / Zhang, Cong / Wei, Jianqiang	Microscopic reinforcement for cement based composite materials	14-25
Jiang, Linhua / Song, Zijian / Yang, Hu / Pu, Qi / Zhu, Qiao	Modeling the chloride concentration profile in migration test based on general Poisson Nernst Planck equations and pore structure hypothesis	596-603
Yusoff, Nur Izzi Md. / Jakarni, Fauzan Mohd / Nguyen, Viet Hung / Hainin, Mohd Rosli / Airey, Gordon D.	Modelling the rheological properties of bituminous binders using mathematical equations	174-188
Özgan, Ercan / Serin, Sercan / Kap, Tuncay	Multi-faceted investigation into the effects of hot-mix asphalt parameters on Marshall Stability	419-425
Sasmal, Saptarshi / Khatri, Chandra Prakash / Ramanjaneyulu, K. / Srinivas, V.	Numerical evaluation of bond–slip relations for near-surface mounted carbon fiber bars embedded in concrete	1097-1109
Shafigh, Payam / Jumaat, Mohd Zamin / Mahmud, Hilmi Bin / Alengaram, U. Johnson	Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag	231-238
Mohammed, Bashar S. / Ean, L. W. / Malek, M. A.	One way RC wall panels with openings strengthened with CFRP	575-583
Demirel, Bilal	Optimization of the composite brick composed of expanded polystyrene and pumice blocks	306-313
Walubita, Lubinda F. / Faruk, Abu N. M. / Alvarez, Allex E. / Scullion, Tom	The Overlay Tester (OT): Using the Fracture Energy Index concept to analyze the OT monotonic loading test data	802-811
Martínez, I. / Castillo, A. / Martínez, E. / Castellote, M.	Physico-chemical material characterization of historic unreinforced masonry buildings: The first step for a suitable intervention	352-360
Tonet, Karina Guerra / Gorninski, Jane Proszek	Polymer concrete with recycled PET: The influence of the addition of industrial waste on flammability	378-389
Gorhan, Gokhan / Şimşek, Osman	Porous clay bricks manufactured with rice husks	390-396
Duan, Z. H. / Kou, S. C. / Poon, C. S.	Prediction of compressive strength of recycled aggregate concrete using artificial neural networks	1200-1206
Rashad, Alaa M. / Khalil, Mervat H.	A preliminary study of alkali-activated slag blended with silica fume under the effect of thermal loads and thermal shock cycles	522-532
Dong, Biqin / Han, Ningxu / Ding, Zhu / Xing, Feng / Cui, Hongzhi	A preliminary study of synthesized-in situ fiber in cement materials	10-13
Ulsen, C. / Kahn, H. / Hawlitschek, G. / Masini, E. A. / Angulo, S. C. / John, V. M.	Production of recycled sand from construction and demolition waste	1168-1173
Hui, Zhao / Poon, Chi Sun / Ling, Tung Chai	Properties of mortar prepared with recycled cathode ray tube funnel glass sand at different mineral admixture	951-960
Ribeiro, J. L. S. / Panossian, Z. / Selmo, S. M. S.	Proposed criterion to assess the electrochemical behavior of carbon steel reinforcements under corrosion in carbonated concrete structures after patch repairs	40-49
Zheng, Chuanfeng / Zhao, Dajun / Chen, Chuanjing / Song, Zhenfeng / Zheng, Shi	Quantitative test technology study on the mesoscopic strength parameters of the mineral aggregate contact surface of bituminous-stabilized macadam	622-631
Pinto, Jorge / Peixoto, Artur / Vieira, José / Fernandes, Lisete / Morais, José / Cunha, Vítor M. C. F. / Varum, Humberto	Render reinforced with textile threads	26-32
Gao, Pei-wei / Xu, Shao-yun / Chen, Xiong / Li, Jun / Lu, Xiao-lin	Research on autogenous volume deformation of concrete with MgO	998-1001
Cihan, M. Timur / Güner, Abdurrahman / Yuzer, Nabi	Response surfaces for compressive strength of concrete	763-774
Medina, C. / Banfill, P. F. G. / Sánchez de Rojas, M. I. / Frías, M.	Rheological and calorimetric behaviour of cements blended with containing ceramic sanitary ware and construction/demolition waste	822-831
Baldino, Noemi / Gabriele, Domenico / Lupi, Francesca R. / Oliviero Rossi, Cesare / Caputo, Paolino / Falvo, Thomas	Rheological effects on bitumen of polyphosphoric acid (PPA) addition	397-404
Sun, Lu / Zhu, Yaoting	A serial two-stage viscoelastic–viscoplastic constitutive model with thermodynamical consistency for characterizing time-dependent deformation behavior of asphalt concrete mixtures	584-595
Alecci, Valerio / Fagone, Mario / Rotunno, Tommaso / De Stefano, Mario	Shear strength of brick masonry walls assembled with different types of mortar	1038-1045
Won, Jong-Pil / Kim, Soo-Hwan / Lee, Su-Jin / Choi, Se Jin	Shrinkage and durability characteristics of eco-friendly fireproof high-strength concrete	753-762
Casolo, Siro / Milani, Gabriele	Simplified out-of-plane modelling of three-leaf masonry walls accounting for the material texture	330-351
Moriyoshi, Akihiro / Takahashi, Naoyuki / Ikeda, Osamu / Kawashima, Masato / Akabane, Takahiko	Strain distribution in asphalt mixtures during the wheel tracking test at high temperatures	1128-1135
Sukmak, Patimapon / Horpibulsuk, Suksun / Shen, Shui-Long	Strength development in clay–fly ash geopolymer	566-574
Silva, E. R. / Coelho, J. F. J. / Bordado, J. C.	Strength improvement of mortar composites reinforced with newly hybrid-blended fibres: Influence of fibres geometry and morphology	473-480
Shariq, Mohd / Prasad, Jagdish / Masood, Amjad	Studies in ultrasonic pulse velocity of concrete containing GGBFS	944-950
Sheen, Yeong-Nain / Wang, Her-Yung / Sun, Te-Ho	A study of engineering properties of cement mortar with stainless steel oxidizing slag and reducing slag resource materials	239-245
Lee, G. C. / Choi, H. B.	Study on interfacial transition zone properties of recycled aggregate by micro-hardness test	455-460
Taazount, M. / Amziane, S. / Molard, D.	Tangential behavior of nailed composite timber–concrete floor structures	506-513
Ioannou, Ioannis / Fournari, Revecca / Petrou, Michael F.	Testing the soundness of aggregates using different methodologies	604-610
Ramezanianpour, Amir Mohammad / Hooton, R. Douglas	Thaumasite sulfate attack in Portland and Portland-limestone cement mortars exposed to sulfate solution	162-173
Huang, Baoshan / Shu, Xiang / Cao, Jingyao	A two-staged surface treatment to improve properties of rubber modified cement composites	270-274
Łaźniewska-Piekarczyk, Beata	The type of air-entraining and viscosity modifying admixtures and porosity and frost durability of high performance self-compacting concrete	659-671
Yoshitake, Isamu / Zhang, Wenbo / Mimura, Yoichi / Saito, Tadashi	Uniaxial tensile strength and tensile Young's modulus of fly-ash concrete at early age	514-521
Jiménez, J. R. / Ayuso, J. / Lopez, M. / Fernández, J. M. / de Brito, J.	Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing	679-690
Manso, Juan M. / Ortega-López, Vanesa / Polanco, Juan A. / Setién, Jesús	The use of ladle furnace slag in soil stabilization	126-134
Segui, P. / Aubert, J. E. / Husson, B. / Measson, M.	Utilization of a natural pozzolan as the main component of hydraulic road binder	217-223
Ahmari, Saeed / Zhang, Lianyang	Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricks	1002-1011
Kim, Kyoung Min / Park, Sang Joon / Kim, Yong Jic	Utilization of separator bag filter dust for high early strength cement production: Properties of concrete	746-752
Higashiyama, Hiroshi / Yamauchi, Kiyoshi / Sappakittipakorn, Manote / Sano, Masanori / Takahashi, Osamu	A visual investigation on chloride ingress into ceramic waste aggregate mortars having different water to cement ratios	1021-1028
Barroca, Norberto / Borges, Luís M. / Velez, Fernando J. / Monteiro, Filipe / Górski, Marcin / Castro-Gomes, João	Wireless sensor networks for temperature and humidity monitoring within concrete structures	1156-1166

About this
data sheet
IssueID
22506
Published on:
13/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - March 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - March 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.