Construction and Building Materials - mars 2013

Publié:	mars 2013

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Yardim, Yavuz / Waleed, A. M. T. / Jaafar, Mohd. Saleh / Laseima, Saleh	AAC-concrete light weight precast composite floor slab	405-410
Radwan, M. M. / Farag, L. M. / Abo-El-Enein, S. A. / Abd El-Hamid, H. K.	Alkali activation of blended cements containing oil shale ash	367-377
Papayianni, Ioanna / Pachta, Vasiliki / Stefanidou, Maria	Analysis of ancient mortars and design of compatible repair mortars: The case study of Odeion of the archaeological site of Dion	84-92
Amadore, Antonio / Bosurgi, Gaetano / Pellegrino, Orazio	Analysis of hot mix asphalt compaction data by means of fuzzy clustering techniques	430-437
Galvín, Adela P. / Ayuso, Jesús / Agrela, Francisco / Barbudo, Auxiliadora / Jiménez, José Ramón	Analysis of leaching procedures for environmental risk assessment of recycled aggregate use in unpaved roads	1207-1214
Bołtryk, Michał / Małaszkiewicz, Dorota	Application of anionic asphalt emulsion as an admixture for concrete	556-565
Mashrei, Mohammed A. / Seracino, R. / Rahman, M. S.	Application of artificial neural networks to predict the bond strength of FRP-to-concrete joints	812-821
Blanco, Ana / Pujadas, Pablo / de la Fuente, Albert / Cavalaro, Sergio / Aguado, Antonio	Application of constitutive models in European codes to RC–FRC	246-259
Martín-del-Río, J. J. / Alejandre, F. J. / Márquez, G. / Blasco, F. J.	An argument for using alizarine yellow R and indigo carmine to determine in situ the degree of alkalinity in reinforced concrete	426-429
Hu, J. / Wang, K. / Gaunt, J. A.	Behavior and mix design development of concrete made with recycled aggregate from deconstructed lead-contaminated masonry materials	1184-1192
Astorga, Ariela / Santa María, Hernán / Lopez, Mauricio	Behavior of a concrete bridge cantilevered slab reinforced using NSM CFRP strips	461-472
Chi, Maochieh / Huang, Ran	Binding mechanism and properties of alkali-activated fly ash/slag mortars	291-298
Pacheco-Torgal, F. / Labrincha, J. A.	Biotech cementitious materials: Some aspects of an innovative approach for concrete with enhanced durability	1136-1141
Sena-Cruz, José / Jorge, Marco / Branco, Jorge M. / Cunha, Vítor M. C. F.	Bond between glulam and NSM CFRP laminates	260-269
Talukdar, S. / Banthia, N.	Carbonation in concrete infrastructure in the context of global climate change: Development of a service lifespan model	775-782
Rodríguez, O. / Kacimi, L. / López-Delgado, A. / Frías, M. / Guerrero, A.	Characterization of Algerian reservoir sludges for use as active additions in cement: New pozzolans for eco-cement manufacture	275-279
Khattak, Mohammad Jamal / Khattab, Ahmed / Rizvi, Hashim R.	Characterization of carbon nano-fiber modified hot mix asphalt mixtures	738-745
Kim, Sughwan / Seo, Jungki / Cha, Junghoon / Kim, Sumin	Chemical retreating for gel-typed aerogel and insulation performance of cement containing aerogel	501-505
Yodsudjai, Wanchai / Wang, Kejin	Chemical shrinkage behavior of pastes made with different types of cements	854-862
Vinai, R. / Lawane, A. / Minane, J. R. / Amadou, A.	Coal combustion residues valorisation: Research and development on compressed brick production	1088-1096
Nguyen, Thi Thanh Hien / Li, Shujun / Li, Jian	The combined effects of copper sulfate and rosin sizing agent treatment on some physical and mechanical properties of poplar wood	33-39
Arezoumandi, Mahdi / Wolfe, Michael H. / Volz, Jeffery S.	A comparative study of the bond strength of reinforcing steel in high-volume fly ash concrete and conventional concrete	919-924
Faria, Gonçalo / Chastre, Carlos / Lúcio, Válter / Nunes, Ângela	Compression behaviour of short columns made from cement-bonded particle board	60-69
Al-Hammoud, Rania / Soudki, Khaled / Topper, Timothy H.	Confinement effect on the bond behaviour of beams under static and repeated loading	934-943
Ryu, Sung Woo / Won, Hoon Ill / Choi, Seongcheol / Won, Moon C.	Continuously reinforced bonded concrete overlay of distressed jointed plain concrete pavements	1110-1117
Nguyen, Tien-Cuong / Bai, Yu / Zhao, Xiao-Ling / Al-Mahaidi, Riadh	Curing effects on steel/CFRP double strap joints under combined mechanical load, temperature and humidity	899-907
Abbasnia, R. / Hosseinpour, F. / Rostamian, M. / Ziaadiny, H.	Cyclic and monotonic behavior of FRP confined concrete rectangular prisms with different aspect ratios	118-125
Elfergani, Hisham A. / Pullin, Rhys / Holford, Karen M.	Damage assessment of corrosion in prestressed concrete by acoustic emission	925-933
Valença, J. / Gonçalves, L. M. S. / Júlio, E.	Damage assessment on concrete surfaces using multi-spectral image analysis	971-981
Aigbomian, Eboziegbe Patrick / Fan, Mizi	Development of Wood-Crete building materials from sawdust and waste paper	361-366
Briere, Vincent / Harries, Kent A. / Kasan, Jarret / Hager, Charles	Dilation behavior of seven-wire prestressing strand – The Hoyer effect	650-658
Teng, Susanto / Lim, Tze Yang Darren / Divsholi, Bahador Sabet	Durability and mechanical properties of high strength concrete incorporating ultra fine Ground Granulated Blast-furnace Slag	875-881
Thomas, C. / Setién, J. / Polanco, J. A. / Alaejos, P. / Sánchez de Juan, M.	Durability of recycled aggregate concrete	1054-1065
Sfikas, Ioannis P. / Kanellopoulos, Antonis / Trezos, Konstantinos G. / Petrou, Michael F.	Durability of similar self-compacting concrete batches produced in two different EU laboratories	207-216
Lai, W. L. / Kou, S. C. / Poon, C. S. / Tsang, W. F. / Lee, K. K.	A durability study of externally bonded FRP-concrete beams via full-field infrared thermography (IRT) and quasi-static shear test	481-491
Shiming, Shang / Yupu, Song	Dynamic biaxial tensile–compressive strength and failure criterion of plain concrete	322-329
Fantilli, Alessandro P. / Chiaia, Bernardino	Eco-mechanical performances of cement-based materials: An application to self-consolidating concrete	189-196
Padilla, Victor / Ghods, Pouria / Alfantazi, Akram	Effect of de-icing salts on the corrosion performance of galvanized steel in sulphate contaminated soil	908-918
Zhang, Henglong / Jia, Xiaojuan / Yu, Jianying / Xue, Lihui	Effect of expanded vermiculite on microstructures and aging properties of styrene–butadiene–styrene copolymer modified bitumen	224-230
Soulioti, D. V. / Barkoula, N-M. / Koutsianopoulos, F. / Charalambakis, N. / Matikas, T. E.	The effect of fibre chemical treatment on the steel fibre/cementitious matrix interface	77-83
Isikdag, Burak / Topçu, İlker Bekir	The effect of ground granulated blast-furnace slag on properties of Horasan mortar	448-454
Duong, V. B. / Sahamitmongkol, R. / Tangtermsirikul, S.	Effect of leaching on carbonation resistance and steel corrosion of cement-based materials	1066-1075
Mehdipour, Iman / Razzaghi, Mehran Seyed / Amini, Kamran / Shekarchi, Mohammad	Effect of mineral admixtures on fluidity and stability of self-consolidating mortar subjected to prolonged mixing time	1029-1037
Zhang, Henglong / Shi, Caijun / Han, Jun / Yu, Jianying	Effect of organic layered silicates on flame retardancy and aging properties of bitumen	1151-1155
Gesoǧlu, Mehmet / Güneyisi, Erhan / Alzeebaree, Radhwan / Mermerdaş, Kasım	Effect of silica fume and steel fiber on the mechanical properties of the concretes produced with cold bonded fly ash aggregates	982-990
Yazici, Şemsi / Arel, Hasan Şahan	The effect of steel fiber on the bond between concrete and deformed steel bar in SFRCs	299-305
Mehdipour, Iman / Libre, Nicolas Ali / Shekarchi, Mohammad / Khanjani, Maryam	Effect of workability characteristics on the hardened performance of FRSCCMs	611-621
Calmon, João Luiz / Tristão, Fernando Avancini / Giacometti, Marcela / Meneguelli, Marcelo / Moratti, Mirko / Teixeira, Jamilla Emi Sudo Lutif	Effects of BOF steel slag and other cementitious materials on the rheological properties of self-compacting cement pastes	1046-1053
Cuenca, J. / Rodríguez, J. / Martín-Morales, M. / Sánchez-Roldán, Z. / Zamorano, M.	Effects of olive residue biomass fly ash as filler in self-compacting concrete	702-709
Ribeiro, P. H. L. C. / Meira, G. R. / Ferreira, P. R. R. / Perazzo, N.	Electrochemical realkalisation of carbonated concretes – Influence of material characteristics and thickness of concrete reinforcement cover	280-290
Ban Cheah, Chee / Ramli, Mahyuddin	The engineering properties of high performance concrete with HCWA–DSF supplementary binder	93-103
Pereira de Oliveira, L. A. / Castro Gomes, J. P. / Bernardo, L. F. A. / Ramos, M. M. M.	Evaluation of dry mortar ratio as mix design parameter for steel fibre reinforced self compacting concrete	642-649
Li, Ling / Gong, Meng / Li, Dagang	Evaluation of the kinetic friction performance of modified wood decking products	863-868
Jitsangiam, Peerapong / Chindaprasirt, Prinya / Nikraz, Hamid	An evaluation of the suitability of SUPERPAVE and Marshall asphalt mix designs as they relate to Thailand's climatic conditions	961-970
Yeon, Jung Heum / Choi, Seongcheol / Won, Moon C.	Evaluation of zero-stress temperature prediction model for Portland cement concrete pavements	492-500
Wan, Keshu / Li, Yan / Sun, Wei	Experimental and modelling research of the accelerated calcium leaching of cement paste in ammonium nitrate solution	832-846
Almusallam, Tarek H. / Elsanadedy, Hussein M. / Al-Salloum, Yousef A. / Alsayed, Saleh H.	Experimental and numerical investigation for the flexural strengthening of RC beams using near-surface mounted steel or GFRP bars	145-161
Tsioulou, Ourania T. / Lampropoulos, Andreas P. / Dritsos, Stephanos E.	Experimental investigation of interface behaviour of RC beams strengthened with concrete layers	50-59
Yan, Libo / Chouw, Nawawi	Experimental study of flax FRP tube encased coir fibre reinforced concrete composite column	1118-1127
Lubelli, B. / van Hees, R. P. J. / Hacquebord, A.	Experimental study of the distribution of chemical products against rising damp in substrates with different water saturation degrees	891-898
Hussain, Haleem K. / Zhang, Lian Zhen / Liu, Gui Wei	An experimental study on strengthening reinforced concrete T-beams using new material poly-urethane-cement (PUC)	104-117
Nowak, Tomasz P. / Jasienko, Jerzy / Czepiżak, Dariusz	Experimental tests and numerical analysis of historic bent timber elements reinforced with CFRP strips	197-206
Erdem, Savaş / Blankson, Marva Angela	Fractal–fracture analysis and characterization of impact-fractured surfaces in different types of concrete using digital image analysis and 3D nanomap laser profilometery	70-76
Merta, I. / Tschegg, E. K.	Fracture energy of natural fibre reinforced concrete	991-997
Liu, Jian / Agostini, Franck / Skoczylas, Frédéric	From relative gas permeability to in situ saturation measurements	882-890
Pacheco-Torgal, F. / Labrincha, J. A.	The future of construction materials research and the seventh UN Millennium Development Goal: A few insights	729-737
Wu, Chenglin / Chen, Genda / Volz, Jeffery S. / Brow, Richard K. / Koenigstein, Michael L.	Global bond behavior of enamel-coated rebar in concrete beams with spliced reinforcement	793-801
Darquennes, Aveline / Espion, Bernard / Staquet, Stéphanie	How to assess the hydration of slag cement concretes?	1012-1020
del Coz Díaz, Juan José / Álvarez Rabanal, Felipe Pedro / García Nieto, Paulino José / Domínguez Hernández, Javier / Rodríguez Soria, Beatriz / Pérez-Bella, Jose María	Hygrothermal properties of lightweight concrete: Experiments and numerical fitting study	543-555
Wong, Leong Sing / Hashim, Roslan / Ali, Faisal	Improved strength and reduced permeability of stabilized peat: Focus on application of kaolin as a pozzolanic additive	783-792
Belferrag, Allaoua / Kriker, Abdelouahed / Khenfer, Mohamed Elmouldi	Improvement of the compressive strength of mortar in the arid climates by valorization of dune sand and pneumatic waste metal fibers	847-853
Adorni, Elisa / Coïsson, Eva / Ferretti, Daniele	In situ characterization of archaeological adobe bricks	1-9
Pereira, Victor Correia de Oliveira / Monteiro, Eliana Cristina Barreto / da Silva Almeida, Kalline	Influence of cement type in reinforcement corrosion of mortars under action of chlorides	710-718
Park, Wonjun / Noguchi, Takafumi	Influence of metal impurity on recycled aggregate concrete and inspection method for aluminum impurity	1174-1183
Chen, Xudong / Wu, Shengxing / Zhou, Jikai	Influence of porosity on compressive and tensile strength of cement mortar	869-874
Jiménez-Quero, V. G. / León-Martínez, F. M. / Montes-Garcia, P. / Gaona-Tiburcio, C. / Chacón-Nava, J. G.	Influence of sugar-cane bagasse ash and fly ash on the rheological behavior of cement pastes and mortars	691-701
Iovinella, Ivano / Prota, Andrea / Mazzotti, Claudio	Influence of surface roughness on the bond of FRP laminates to concrete	533-542
Silveira, Dora / Varum, Humberto / Costa, Aníbal	Influence of the testing procedures in the mechanical characterization of adobe bricks	719-728
Zhang, Lei / Wang, Wenwei / Lu, Qing / Chen, Xianhua	An innovative approach to determine deck pavement modulus and interfacial slip stiffness based on a composite beam model	411-418
Cong, Peiliang / Xun, Peijun / Xing, Mingliang / Chen, Shuanfa	Investigation of asphalt binder containing various crumb rubbers and asphalts	632-641
Ghourchian, Sadegh / Wyrzykowski, Mateusz / Lura, Pietro / Shekarchi, Mohammad / Ahmadi, Babak	An investigation on the use of zeolite aggregates for internal curing of concrete	135-144
Shen, Yan / Qian, Jueshi / Zhang, Zhiwei	Investigations of anhydrite in CFBC fly ash as cement retarders	672-678
Ameri, Mahmoud / Mansourian, Ahmad / Sheikhmotevali, Amir Hossein	Laboratory evaluation of ethylene vinyl acetate modified bitumens and mixtures based upon performance related parameters	438-447
Babaizadeh, Hamed / Hassan, Marwa	Life cycle assessment of nano-sized titanium dioxide coating on residential windows	314-321
López Gayarre, F. / López-Colina, C. / Serrano, M. A. / López-Martínez, A.	Manufacture of concrete kerbs and floor blocks with recycled aggregate from C&DW	1193-1199
Chabot, A. / Hun, M. / Hammoum, F.	Mechanical analysis of a mixed mode debonding test for "composite" pavements	1076-1087
Kalla, Pawan / Misra, Anurag / Gupta, Ramesh Chandra / Csetenyi, Laszlo / Gahlot, Vimal / Arora, Amarnath	Mechanical and durability studies on concrete containing wollastonite–fly ash combination	1142-1150
Cao, Mingli / Zhang, Cong / Wei, Jianqiang	Microscopic reinforcement for cement based composite materials	14-25
Jiang, Linhua / Song, Zijian / Yang, Hu / Pu, Qi / Zhu, Qiao	Modeling the chloride concentration profile in migration test based on general Poisson Nernst Planck equations and pore structure hypothesis	596-603
Yusoff, Nur Izzi Md. / Jakarni, Fauzan Mohd / Nguyen, Viet Hung / Hainin, Mohd Rosli / Airey, Gordon D.	Modelling the rheological properties of bituminous binders using mathematical equations	174-188
Özgan, Ercan / Serin, Sercan / Kap, Tuncay	Multi-faceted investigation into the effects of hot-mix asphalt parameters on Marshall Stability	419-425
Sasmal, Saptarshi / Khatri, Chandra Prakash / Ramanjaneyulu, K. / Srinivas, V.	Numerical evaluation of bond–slip relations for near-surface mounted carbon fiber bars embedded in concrete	1097-1109
Shafigh, Payam / Jumaat, Mohd Zamin / Mahmud, Hilmi Bin / Alengaram, U. Johnson	Oil palm shell lightweight concrete containing high volume ground granulated blast furnace slag	231-238
Mohammed, Bashar S. / Ean, L. W. / Malek, M. A.	One way RC wall panels with openings strengthened with CFRP	575-583
Demirel, Bilal	Optimization of the composite brick composed of expanded polystyrene and pumice blocks	306-313
Walubita, Lubinda F. / Faruk, Abu N. M. / Alvarez, Allex E. / Scullion, Tom	The Overlay Tester (OT): Using the Fracture Energy Index concept to analyze the OT monotonic loading test data	802-811
Martínez, I. / Castillo, A. / Martínez, E. / Castellote, M.	Physico-chemical material characterization of historic unreinforced masonry buildings: The first step for a suitable intervention	352-360
Tonet, Karina Guerra / Gorninski, Jane Proszek	Polymer concrete with recycled PET: The influence of the addition of industrial waste on flammability	378-389
Gorhan, Gokhan / Şimşek, Osman	Porous clay bricks manufactured with rice husks	390-396
Duan, Z. H. / Kou, S. C. / Poon, C. S.	Prediction of compressive strength of recycled aggregate concrete using artificial neural networks	1200-1206
Rashad, Alaa M. / Khalil, Mervat H.	A preliminary study of alkali-activated slag blended with silica fume under the effect of thermal loads and thermal shock cycles	522-532
Dong, Biqin / Han, Ningxu / Ding, Zhu / Xing, Feng / Cui, Hongzhi	A preliminary study of synthesized-in situ fiber in cement materials	10-13
Ulsen, C. / Kahn, H. / Hawlitschek, G. / Masini, E. A. / Angulo, S. C. / John, V. M.	Production of recycled sand from construction and demolition waste	1168-1173
Hui, Zhao / Poon, Chi Sun / Ling, Tung Chai	Properties of mortar prepared with recycled cathode ray tube funnel glass sand at different mineral admixture	951-960
Ribeiro, J. L. S. / Panossian, Z. / Selmo, S. M. S.	Proposed criterion to assess the electrochemical behavior of carbon steel reinforcements under corrosion in carbonated concrete structures after patch repairs	40-49
Zheng, Chuanfeng / Zhao, Dajun / Chen, Chuanjing / Song, Zhenfeng / Zheng, Shi	Quantitative test technology study on the mesoscopic strength parameters of the mineral aggregate contact surface of bituminous-stabilized macadam	622-631
Pinto, Jorge / Peixoto, Artur / Vieira, José / Fernandes, Lisete / Morais, José / Cunha, Vítor M. C. F. / Varum, Humberto	Render reinforced with textile threads	26-32
Gao, Pei-wei / Xu, Shao-yun / Chen, Xiong / Li, Jun / Lu, Xiao-lin	Research on autogenous volume deformation of concrete with MgO	998-1001
Cihan, M. Timur / Güner, Abdurrahman / Yuzer, Nabi	Response surfaces for compressive strength of concrete	763-774
Medina, C. / Banfill, P. F. G. / Sánchez de Rojas, M. I. / Frías, M.	Rheological and calorimetric behaviour of cements blended with containing ceramic sanitary ware and construction/demolition waste	822-831
Baldino, Noemi / Gabriele, Domenico / Lupi, Francesca R. / Oliviero Rossi, Cesare / Caputo, Paolino / Falvo, Thomas	Rheological effects on bitumen of polyphosphoric acid (PPA) addition	397-404
Sun, Lu / Zhu, Yaoting	A serial two-stage viscoelastic–viscoplastic constitutive model with thermodynamical consistency for characterizing time-dependent deformation behavior of asphalt concrete mixtures	584-595
Alecci, Valerio / Fagone, Mario / Rotunno, Tommaso / De Stefano, Mario	Shear strength of brick masonry walls assembled with different types of mortar	1038-1045
Won, Jong-Pil / Kim, Soo-Hwan / Lee, Su-Jin / Choi, Se Jin	Shrinkage and durability characteristics of eco-friendly fireproof high-strength concrete	753-762
Casolo, Siro / Milani, Gabriele	Simplified out-of-plane modelling of three-leaf masonry walls accounting for the material texture	330-351
Moriyoshi, Akihiro / Takahashi, Naoyuki / Ikeda, Osamu / Kawashima, Masato / Akabane, Takahiko	Strain distribution in asphalt mixtures during the wheel tracking test at high temperatures	1128-1135
Sukmak, Patimapon / Horpibulsuk, Suksun / Shen, Shui-Long	Strength development in clay–fly ash geopolymer	566-574
Silva, E. R. / Coelho, J. F. J. / Bordado, J. C.	Strength improvement of mortar composites reinforced with newly hybrid-blended fibres: Influence of fibres geometry and morphology	473-480
Shariq, Mohd / Prasad, Jagdish / Masood, Amjad	Studies in ultrasonic pulse velocity of concrete containing GGBFS	944-950
Sheen, Yeong-Nain / Wang, Her-Yung / Sun, Te-Ho	A study of engineering properties of cement mortar with stainless steel oxidizing slag and reducing slag resource materials	239-245
Lee, G. C. / Choi, H. B.	Study on interfacial transition zone properties of recycled aggregate by micro-hardness test	455-460
Taazount, M. / Amziane, S. / Molard, D.	Tangential behavior of nailed composite timber–concrete floor structures	506-513
Ioannou, Ioannis / Fournari, Revecca / Petrou, Michael F.	Testing the soundness of aggregates using different methodologies	604-610
Ramezanianpour, Amir Mohammad / Hooton, R. Douglas	Thaumasite sulfate attack in Portland and Portland-limestone cement mortars exposed to sulfate solution	162-173
Huang, Baoshan / Shu, Xiang / Cao, Jingyao	A two-staged surface treatment to improve properties of rubber modified cement composites	270-274
Łaźniewska-Piekarczyk, Beata	The type of air-entraining and viscosity modifying admixtures and porosity and frost durability of high performance self-compacting concrete	659-671
Yoshitake, Isamu / Zhang, Wenbo / Mimura, Yoichi / Saito, Tadashi	Uniaxial tensile strength and tensile Young's modulus of fly-ash concrete at early age	514-521
Jiménez, J. R. / Ayuso, J. / Lopez, M. / Fernández, J. M. / de Brito, J.	Use of fine recycled aggregates from ceramic waste in masonry mortar manufacturing	679-690
Manso, Juan M. / Ortega-López, Vanesa / Polanco, Juan A. / Setién, Jesús	The use of ladle furnace slag in soil stabilization	126-134
Segui, P. / Aubert, J. E. / Husson, B. / Measson, M.	Utilization of a natural pozzolan as the main component of hydraulic road binder	217-223
Ahmari, Saeed / Zhang, Lianyang	Utilization of cement kiln dust (CKD) to enhance mine tailings-based geopolymer bricks	1002-1011
Kim, Kyoung Min / Park, Sang Joon / Kim, Yong Jic	Utilization of separator bag filter dust for high early strength cement production: Properties of concrete	746-752
Higashiyama, Hiroshi / Yamauchi, Kiyoshi / Sappakittipakorn, Manote / Sano, Masanori / Takahashi, Osamu	A visual investigation on chloride ingress into ceramic waste aggregate mortars having different water to cement ratios	1021-1028
Barroca, Norberto / Borges, Luís M. / Velez, Fernando J. / Monteiro, Filipe / Górski, Marcin / Castro-Gomes, João	Wireless sensor networks for temperature and humidity monitoring within concrete structures	1156-1166

Informations
sur cette fiche
IssueID
22506
Publié(e) le:
13.12.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - mars 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - mars 2013

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.