Construction and Building Materials - October 2012

Published:	October 2012

Articles in this Issue

Author(s)	Title	Page(s)
Ueng, Tzuu-Hsing / Lyu, Syuan-Jhih / Chu, Hsiu-Wen / Lee, Hung-Hui / Wang, Tai-Tien	Adhesion at interface of geopolymer and cement mortar under compression: An experimental study	204-210
Caro, Silvia / Beltrán, Diana P. / Alvarez, Allex E. / Estakhri, Cindy	Analysis of moisture damage susceptibility of warm mix asphalt (WMA) mixtures based on Dynamic Mechanical Analyzer (DMA) testing and a fracture mechanics model	460-467
de Jesus, Abilio M. P. / Pinto, José M. T. / Morais, José J. L.	Analysis of solid wood beams strengthened with CFRP laminates of distinct lengths	817-828
Lima, Sofia A. / Varum, Humberto / Sales, Almir / Neto, Victor F.	Analysis of the mechanical properties of compressed earth block masonry using the sugarcane bagasse ash	829-837
Moghaddas Tafreshi, S. N. / Norouzi, A. H.	Bearing capacity of a square model footing on sand reinforced with shredded tire – An experimental investigation	547-556
Morsy, M. S. / Al-Salloum, Y. A. / Abbas, H. / Alsayed, S. H.	Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures	900-905
Alvarez, Allex E. / Ovalles, Evelyn / Martin, Amy Epps	Comparison of asphalt rubber-aggregate and polymer modified asphalt–aggregate systems in terms of surface free energy and energy indices	385-392
Zheng, Wenzhong / Li, Haiyan / Wang, Ying	Compressive stress–strain relationship of steel fiber-reinforced reactive powder concrete after exposure to elevated temperatures	931-940
Tae, Sung-Ho	Corrosion inhibition of steel in concrete with natural inorganic minerals in corrosive environments due to chloride attack	270-280
Kakooei, Saeid / Md Akil, Hazizan / Dolati, Abolghasem / Rouhi, Jalal	The corrosion investigation of rebar embedded in the fibers reinforced concrete	564-570
Li, Chang / Li, Linglin	Criteria for controlling rutting of asphalt concrete materials in sloped pavement	330-339
Vidya Sagar, R. / Prasad, B. K. Raghu	Damage limit states of reinforced concrete beams subjected to incremental cyclic loading using relaxation ratio analysis of AE parameters	139-148
Balayssac, J.-P. / Laurens, S. / Arliguie, G. / Breysse, D. / Garnier, V. / Derobert, X. / Piwakowski, B.	Description of the general outlines of the French project SENSO – Quality assessment and limits of different NDT methods	131-138
Tekin, Ilker / Birgul, Recep / Aruntas, Huseyin Yilmaz	Determination of the effect of volcanic pumice replacement on macro void development for blended cement mortars by computerized tomography	15-22
Meng, Tao / Chen, Yunmin / Jin, Xianyu / Zhan, Shulin / Qian, Xiaoqian	Development and design of composite cementitious material at long-time circular elevated temperature in metallurgy environment	368-375
Ghanem, Hassan / Zollinger, Dan / Lytton, Robert / Ghanem, Noha	Development of a reaction signature for combined concrete materials factors	923-930
Morsy, M. S. / Alsayed, S. H. / Salloum, Y. A.	Development of eco-friendly binder using metakaolin-fly ash–lime-anhydrous gypsum	772-777
Dawood, Eethar Thanon / Ramli, Mahyuddin	Durability of high strength flowing concrete with hybrid fibres	521-530
Tchakoute Kouamo, H. / Elimbi, A. / Mbey, J. A. / Ngally Sabouang, C. J. / Njopwouo, D.	The effect of adding alumina-oxide to metakaolin and volcanic ash on geopolymer products: A comparative study	960-969
Karakurt, Cenk / Topçu, İlker Bekir	Effect of blended cements with natural zeolite and industrial by-products on rebar corrosion and high temperature resistance of concrete	906-911
Wang, Qiang / Yan, Peiyu / Mi, Guidong	Effect of blended steel slag–GBFS mineral admixture on hydration and strength of cement	8-14
Chen, How-Ji / Huang, Shao-Siang / Tang, Chao-Wei / Malek, M. A. / Ean, Lee-Woen	Effect of curing environments on strength, porosity and chloride ingress resistance of blast furnace slag cement concretes: A construction site study	1063-1070
El-Didamony, H. / Heikal, Mohamed / Khalil, Kh. A. / Al-Masry, S.	Effect of delaying addition time of SMF superplasticizer on the physico-mechanical properties and durability of cement pastes	261-269
Yazici, Şemsi / İnan Sezer, Gözde / Şengül, Hakan	The effect of high temperature on the compressive strength of mortars	97-100
Klisińska-Kopacz, Anna / Tišlova, Renata	Effect of hydrophobization treatment on the hydration of repair Roman cement mortars	735-740
Silva, Isabel / Castro-Gomes, João P. / Albuquerque, António	Effect of immersion in water partially alkali-activated materials obtained of tungsten mine waste mud	117-124
Cui, H. Z. / Lo, Tommy Yiu / Memon, Shazim Ali / Xu, Weiting	Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete	149-158
Leung, Chin K. / Grasley, Zachary C.	Effect of micrometric and nanometric viscoelastic inclusions on mechanical damping behavior of cementitious composites	444-451
Arabani, M. / Azarhoosh, A. R.	The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures	1-7
Alver, Ninel / Selman, Mehmet Efe / Akgun, Osman Burak	The effect of short cantilever beam formation on the structural behavior of precast post-tensioned connections	232-239
González-Corrochano, B. / Alonso-Azcárate, J. / Rodas, M.	Effect of thermal treatment on the retention of chemical elements in the structure of lightweight aggregates manufactured from contaminated mine soil and fly ash	497-507
Wang, Hainian / Dang, Zhengxia / You, Zhanping / Cao, Dongwei	Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders	281-288
Basar, H. Merve / Deveci Aksoy, Nuran	The effect of waste foundry sand (WFS) as partial replacement of sand on the mechanical, leaching and micro-structural characteristics of ready-mixed concrete	508-515
Aggelis, D. G. / Mpalaskas, A. C. / Ntalakas, D. / Matikas, T. E.	Effect of wave distortion on acoustic emission characterization of cementitious materials	183-190
Gürer, Cahit / Karaşahin, Mustafa / Çetin, Sedat / Aktaş, Bekir	Effects of construction-related factors on chip seal performance	605-613
Chen, J. J. / Fung, W. W. S. / Kwan, A. K. H.	Effects of CSF on strength, rheology and cohesiveness of cement paste	979-987
Yilmaz, M. / Tuğrul, A.	The effects of different sandstone aggregates on concrete strength	294-303
Chi, Maochieh	Effects of dosage of alkali-activated solution and curing conditions on the properties and durability of alkali-activated slag concrete	240-245
Li, Qingtao / Li, Zhuguo / Yuan, Guanglin	Effects of elevated temperatures on properties of concrete containing ground granulated blast furnace slag as cementitious material	687-692
Berra, M. / Carassiti, F. / Mangialardi, T. / Paolini, A. E. / Sebastiani, M.	Effects of nanosilica addition on workability and compressive strength of Portland cement pastes	666-675
Shoude, Wang / Cheng, Chen / lingchao, Lu / Xin, Cheng	Effects of slag and limestone powder on the hydration and hardening process of alite-barium calcium sulphoaluminate cement	227-231
Hesami, Ebrahim / Jelagin, Denis / Kringos, Niki / Birgisson, Björn	An empirical framework for determining asphalt mastic viscosity as a function of mineral filler concentration	23-29
Kou, S. C. / Poon, C. S.	Enhancing the durability properties of concrete prepared with coarse recycled aggregate	69-76
Corinaldesi, Valeria	Environmentally-friendly bedding mortars for repair of historical buildings	778-784
Chu, Inyeop / Kwon, Seung Hee / Amin, Muhammad Nasir / Kim, Jin-Keun	Estimation of temperature effects on autogenous shrinkage of concrete by a new prediction model	171-182
Li, Ling / Gong, Meng / Li, Dagang	Evaluation of the slip resistance of modified wood decking products	440-443
Eslami, A. / Ronagh, H. R. / Mahini, S. S. / Morshed, R.	Experimental investigation and nonlinear FE analysis of historical masonry buildings – A case study	251-260
Najimi, Meysam / Sobhani, Jafar / Ahmadi, Babak / Shekarchi, Mohammad	An experimental study on durability properties of concrete containing zeolite as a highly reactive natural pozzolan	1023-1033
Moradias, P. A. / Silva, Pedro D. / Castro-Gomes, J. P. / Salazar, M. V. / Pires, L.	Experimental study on hygrothermal behaviour of retrofit solutions applied to old building walls	864-873
Carbonari, G. / Cavalaro, S. H. P. / Cansario, M. M. / Aguado, A.	Flexural behaviour of light-weight sandwich panels composed by concrete and EPS	792-799
Ahmed, A. / Fried, A.	Flexural strength of low density blockwork	516-520
Orbe, A. / Cuadrado, J. / Losada, R. / Rojí, E.	Framework for the design and analysis of steel fiber reinforced self-compacting concrete structures	676-686
Madandoust, Rahmat / Mousavi, S. Yasin	Fresh and hardened properties of self-compacting concrete containing metakaolin	752-760
Judge, R. / Yang, Z. / Jones, S. W. / Beattie, G.	Full 3D finite element modelling of spiral strand cables	452-459
Zhou, Aiping / Huang, Dongsheng / Li, Haitao / Su, Yi	Hybrid approach to determine the mechanical parameters of fibers and matrixes of bamboo	191-196
Matini Behzad, Hamed / Ashori, Alireza / Tarmian, Asghar / Tajvidi, Mehdi	Impacts of wood preservative treatments on some physico-mechanical properties of wood flour/high density polyethylene composites	246-250
Serna, Ángel / Del Río, Mercedes / Palomo, José Gabriel / González, Mariano	Improvement of gypsum plaster strain capacity by the addition of rubber particles from recycled tyres	633-641
Choi, Seongcheol / Yeon, Jung Heum / Won, Moon C.	Improvements of curing operations for Portland cement concrete pavement	597-604
Sakulich, A. R. / Bentz, D. P.	Incorporation of phase change materials in cementitious systems via fine lightweight aggregate	483-490
Gołaszewski, Jacek	Influence of cement properties on new generation superplasticizers performance	586-596
Kontoleontos, F. / Tsakiridis, P. E. / Marinos, A. / Kaloidas, V. / Katsioti, M.	Influence of colloidal nanosilica on ultrafine cement hydration: Physicochemical and microstructural characterization	347-360
Abd Elhakam, Ali / Mohamed, Abd Elmoaty / Awad, Eslam	Influence of self-healing, mixing method and adding silica fume on mechanical properties of recycled aggregates concrete	421-427
Maia, Lino / Figueiras, Helena / Nunes, Sandra / Azenha, Miguel / Figueiras, Joaquim	Influence of shrinkage reducing admixtures on distinct SCC mix compositions	304-312
Golias, Michael / Castro, Javier / Weiss, Jason	The influence of the initial moisture content of lightweight aggregate on internal curing	52-62
Li, Wengui / Xiao, Jianzhuang / Sun, Zhihui / Kawashima, Shiho / Shah, Surendra P.	Interfacial transition zones in recycled aggregate concrete with different mixing approaches	1045-1055
Wang, Jun-Yan / Yang, Quan-Bing	Investigation on compressive behaviors of thermoplastic pipe confined concrete	578-585
Shu, Xiang / Huang, Baoshan / Shrum, Emily D. / Jia, Xiaoyang	Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP	125-130
Wu, Chenglin / Chen, Genda / Volz, Jeffery S. / Brow, Richard K. / Koenigstein, Michael L.	Local bond strength of vitreous enamel coated rebar to concrete	428-439
Bui, Le Anh-tuan / Hwang, Chao-Lung / Chen, Chun-tsun / Lin, Kae-Long / Hsieh, Meng-ying	Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete	1056-1062
Naghizadeh, Zahra / Faezipour, Mehdi / Ebrahimi, Ghanbar / Hamzeh, Yahya	Manufacture of lignocellulosic fiber–cement boards containing foaming agent	408-413
Pérez-Villarejo, L. / Corpas-Iglesias, F. A. / Martínez-Martínez, S. / Artiaga, R. / Pascual-Cosp, J.	Manufacturing new ceramic materials from clay and red mud derived from the aluminium industry	656-665
Mojsilović, Nebojša	Masonry elements with damp-proof course membrane: Assessment of shear strength parameters	1002-1012
Katzer, Jacek	Median diameter as a grading characteristic for fine aggregate cement composite designing	884-887
Matějka, V. / Matějková, P. / Kovář, P. / Vlček, J. / Přikryl, J. / Červenka, P. / Lacný, Z. / Kukutschová, J.	Metakaolinite/TiO2 composite: Photoactive admixture for building materials based on Portland cement binder	38-44
Cannone Falchetto, Augusto / Montepara, Antonio / Tebaldi, Gabriele / Marasteanu, Mihai O.	Microstructural and rheological investigation of asphalt mixtures containing recycled asphalt materials	321-329
Tang, Fujian / Chen, Genda / Volz, Jeffery S. / Brow, Richard K. / Koenigstein, Mike	Microstructure and corrosion resistance of enamel coatings applied to smooth reinforcing steel	376-384
Mohammed, Bashar S. / Fang, Ong Chuan / Hossain, Khandaker M. Anwar / Lachemi, Mohamed	Mix proportioning of concrete containing paper mill residuals using response surface methodology	63-68
Dongyu, Xu / Shifeng, Huang / Lei, Qin / lingchao, Lu / Xin, Cheng	Monitoring of cement hydration reaction process based on ultrasonic technique of piezoelectric composite transducer	220-226
Lignola, Gian Piero / Prota, Andrea / Manfredi, Gaetano / Cosenza, Edoardo	Multiscale non-linear analysis of RC hollow piers wrapped with CFRP under shear-type load	947-959
Ben Fraj, Amor / Bonnet, Stéphanie / Khelidj, Abdelhafid	New approach for coupled chloride/moisture transport in non-saturated concrete with and without slag	761-771
Costa, Hugo / Júlio, Eduardo / Lourenço, Jorge	New approach for shrinkage prediction of high-strength lightweight aggregate concrete	84-91
Sadique, Monower / Nageim, Hassan Al / Atherton, William / Seton, Linda / Dempster, Nicola	A new composite cementitious material for construction	846-855
Mostofinejad, Davood / Reisi, Mohammad	A new DEM-based method to predict packing density of coarse aggregates considering their grading and shapes	414-420
Vázquez-Herrero, Cristina / Martínez-Lage, Isabel / Sánchez-Tembleque, Félix	A new procedure to ensure structural safety based on the maturity method and limit state theory	393-398
Hassan, A. M. T. / Jones, S. W.	Non-destructive testing of ultra high performance fibre reinforced concrete (UHPFRC): A feasibility study for using ultrasonic and resonant frequency testing techniques	361-367
Lou, Tiejiong / Lopes, Sergio M. R. / Lopes, Adelino V.	Numerical analysis of behaviour of concrete beams with external FRP tendons	970-978
Zhu, Xing-yi / Chen, Long	Numerical prediction of elastic modulus of asphalt concrete with imperfect bonding	45-51
Abu Al-Rub, Rashid K. / Ashour, Ahmad I. / Tyson, Bryan M.	On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites	647-655
Baltazar, Luis G. / Henriques, Fernando M. A. / Jorne, Fernando	Optimisation of flow behaviour and stability of superplasticized fresh hydraulic lime grouts through design of experiments	838-845
Criado, M. / Monticelli, C. / Fajardo, S. / Gelli, D. / Grassi, V. / Bastidas, J. M.	Organic corrosion inhibitor mixtures for reinforcing steel embedded in carbonated alkali-activated fly ash mortar	30-37
Anil, Özgür / Tatayoğlu, Muhammed / Demirhan, Murat	Out-of-plane behavior of unreinforced masonry brick walls strengthened with CFRP strips	614-624
Golestani, Behnam / Nejad, Fereidoon Moghadas / Galooyak, Saeed Sadeghpour	Performance evaluation of linear and nonlinear nanocomposite modified asphalts	197-203
Yao, Hui / You, Zhanping / Li, Liang / Shi, Xianming / Goh, Shu Wei / Mills-Beale, Julian / Wingard, David	Performance of asphalt binder blended with non-modified and polymer-modified nanoclay	159-170
Shen, Shihui / Burton, Maria / Jobson, Bertram / Haselbach, Liv	Pervious concrete with titanium dioxide as a photocatalyst compound for a greener urban road environment	874-883
Wang, Y. / Wang, X. Y. / Scholz, M. / Ross, D. K.	A physico-chemical model for the water vapour sorption isotherm of hardened cementitious materials	941-946
Eko, Robert Medjo / Offa, Engelbert Dieudonné / Yatchoupou Ngatcha, Thierry / Seba Minsili, Lezin	Potential of salvaged steel fibers for reinforcement of unfired earth blocks	340-346
Jiang, Jianhua / Yuan, Yingshu	Prediction model for the time-varying corrosion rate of rebar based on micro-environment in concrete	625-632
El-Didamony, H. / Khalil, Kh. A. / Ahmed, I. A. / Heikal, Mohamed	Preparation of β-dicalcium silicate (β-C2S) and calcium sulfoaluminate phases using non-traditional nano-materials	77-83
Ahmari, Saeed / Ren, Xin / Toufigh, Vahab / Zhang, Lianyang	Production of geopolymeric binder from blended waste concrete powder and fly ash	718-729
Lim, N. G. / Jeong, S. W. / Her, J. W. / Ann, K. Y.	Properties of cement-free concrete cast by finely grained nanoslag with the NaOH-based alkali activator	557-563
Sadrmomtazi, A. / Sobhani, J. / Mirgozar, M. A. / Najimi, M.	Properties of multi-strength grade EPS concrete containing silica fume and rice husk ash	211-219
Tuyan, Murat / Yazıcı, Halit	Pull-out behavior of single steel fiber from SIFCON matrix	571-577
Ech, M. / Yotte, S. / Morel, S. / Breysse, D. / Pouteau, B.	Qualification of wearing course material surface evolution after durability test	313-320
Ferrari, L. / Kaufmann, J. / Winnefeld, F. / Plank, J.	Reaction of clinker surfaces investigated with atomic force microscopy	92-96
Cizer, Özlem / Van Balen, Koen / Elsen, Jan / Van Gemert, Dionys	Real-time investigation of reaction rate and mineral phase modifications of lime carbonation	741-751
Hoffmann, Cathleen / Schubert, Sandy / Leemann, Andreas / Motavalli, Masoud	Recycled concrete and mixed rubble as aggregates: Influence of variations in composition on the concrete properties and their use as structural material	701-709
Ali, Esraa Emam / Al-Tersawy, Sherif H.	Recycled glass as a partial replacement for fine aggregate in self compacting concrete	785-791
Onoue, Kozo / Matsushita, Hiromichi	Reduction mechanisms of static compressive strength in concrete due to permeation of liquids	808-816
Oliveira, Joel R. M. / Silva, Hugo M. R. D. / Abreu, Liliana P. F. / Gonzalez-Leon, Juan A.	The role of a surfactant based additive on the production of recycled warm mix asphalts – Less is more	693-700
Xiao, Jianzhuang / Huang, Xiao / Shen, Luming	Seismic behavior of semi-precast column with recycled aggregate concrete	988-1001
Bogas, J. Alexandre / Gomes, Augusto / Pereira, M. F. C.	Self-compacting lightweight concrete produced with expanded clay aggregate	1013-1022
Jensen, Jørgen L. / Quenneville, Pierre / Girhammar, Ulf Arne / Källsner, Bo	Splitting of timber beams loaded perpendicular to grain by connections – Combined effect of edge and end distance	289-293
Franzoni, Elisa / Bandini, Simone	Spontaneous electrical effects in masonry affected by capillary water rise: The role of salts	642-646
Cadoni, Ezio / Fenu, Luigi / Forni, Daniele	Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars	399-407
Campione, Giuseppe	Strength and ductility of R.C. columns strengthened with steel angles and battens	800-807
Awwad, Elie / Mabsout, Mounir / Hamad, Bilal / Farran, Mohamad Talal / Khatib, Helmi	Studies on fiber-reinforced concrete using industrial hemp fibers	710-717
Vanhove, Y. / Djelal, C. / Schwendenmann, G. / Brisset, P.	Study of self consolidating concretes stability during their placement	101-108
Sandoval, Cristián / Roca, Pere	Study of the influence of different parameters on the buckling behaviour of masonry walls	888-899
Heah, C. Y. / Kamarudin, H. / Mustafa Al Bakri, A. M. / Bnhussain, M. / Luqman, M. / Khairul Nizar, I. / Ruzaidi, C. M. / Liew, Y. M.	Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers	912-922
Garcez, Nuno / Lopes, Nuno / de Brito, Jorge / Silvestre, José	System of inspection, diagnosis and repair of external claddings of pitched roofs	1034-1044
Demirboğa, Ramazan / Kan, Abdulkadir	Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes	730-734
Pilkington, Brian / Grove, Stephen	Thermal conductivity probe length to radius ratio problem when measuring building insulation materials	531-546
Zhang, Zhiwei / Qian, Jueshi / You, Chao / Hu, Changhua	Use of circulating fluidized bed combustion fly ash and slag in autoclaved brick	109-116
Zentar, Rachid / Wang, Dongxing / Abriak, Nor Edine / Benzerzour, Mahfoud / Chen, Wenzhao	Utilization of siliceous–aluminous fly ash and cement for solidification of marine sediments	856-863
Qian, Chunxiang / Huang, Bei / Wang, Yujiang / Wu, Miao	Water seepage flow in concrete	491-496
Gaggino, Rosana	Water-resistant panels made from recycled plastics and resin	468-482

About this
data sheet
IssueID
22501
Published on:
16/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2012

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2012

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.