Construction and Building Materials - Oktober 2012

Erschienen:	Oktober 2012

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Ueng, Tzuu-Hsing / Lyu, Syuan-Jhih / Chu, Hsiu-Wen / Lee, Hung-Hui / Wang, Tai-Tien	Adhesion at interface of geopolymer and cement mortar under compression: An experimental study	204-210
Caro, Silvia / Beltrán, Diana P. / Alvarez, Allex E. / Estakhri, Cindy	Analysis of moisture damage susceptibility of warm mix asphalt (WMA) mixtures based on Dynamic Mechanical Analyzer (DMA) testing and a fracture mechanics model	460-467
de Jesus, Abilio M. P. / Pinto, José M. T. / Morais, José J. L.	Analysis of solid wood beams strengthened with CFRP laminates of distinct lengths	817-828
Lima, Sofia A. / Varum, Humberto / Sales, Almir / Neto, Victor F.	Analysis of the mechanical properties of compressed earth block masonry using the sugarcane bagasse ash	829-837
Moghaddas Tafreshi, S. N. / Norouzi, A. H.	Bearing capacity of a square model footing on sand reinforced with shredded tire – An experimental investigation	547-556
Morsy, M. S. / Al-Salloum, Y. A. / Abbas, H. / Alsayed, S. H.	Behavior of blended cement mortars containing nano-metakaolin at elevated temperatures	900-905
Alvarez, Allex E. / Ovalles, Evelyn / Martin, Amy Epps	Comparison of asphalt rubber-aggregate and polymer modified asphalt–aggregate systems in terms of surface free energy and energy indices	385-392
Zheng, Wenzhong / Li, Haiyan / Wang, Ying	Compressive stress–strain relationship of steel fiber-reinforced reactive powder concrete after exposure to elevated temperatures	931-940
Tae, Sung-Ho	Corrosion inhibition of steel in concrete with natural inorganic minerals in corrosive environments due to chloride attack	270-280
Kakooei, Saeid / Md Akil, Hazizan / Dolati, Abolghasem / Rouhi, Jalal	The corrosion investigation of rebar embedded in the fibers reinforced concrete	564-570
Li, Chang / Li, Linglin	Criteria for controlling rutting of asphalt concrete materials in sloped pavement	330-339
Vidya Sagar, R. / Prasad, B. K. Raghu	Damage limit states of reinforced concrete beams subjected to incremental cyclic loading using relaxation ratio analysis of AE parameters	139-148
Balayssac, J.-P. / Laurens, S. / Arliguie, G. / Breysse, D. / Garnier, V. / Derobert, X. / Piwakowski, B.	Description of the general outlines of the French project SENSO – Quality assessment and limits of different NDT methods	131-138
Tekin, Ilker / Birgul, Recep / Aruntas, Huseyin Yilmaz	Determination of the effect of volcanic pumice replacement on macro void development for blended cement mortars by computerized tomography	15-22
Meng, Tao / Chen, Yunmin / Jin, Xianyu / Zhan, Shulin / Qian, Xiaoqian	Development and design of composite cementitious material at long-time circular elevated temperature in metallurgy environment	368-375
Ghanem, Hassan / Zollinger, Dan / Lytton, Robert / Ghanem, Noha	Development of a reaction signature for combined concrete materials factors	923-930
Morsy, M. S. / Alsayed, S. H. / Salloum, Y. A.	Development of eco-friendly binder using metakaolin-fly ash–lime-anhydrous gypsum	772-777
Dawood, Eethar Thanon / Ramli, Mahyuddin	Durability of high strength flowing concrete with hybrid fibres	521-530
Tchakoute Kouamo, H. / Elimbi, A. / Mbey, J. A. / Ngally Sabouang, C. J. / Njopwouo, D.	The effect of adding alumina-oxide to metakaolin and volcanic ash on geopolymer products: A comparative study	960-969
Karakurt, Cenk / Topçu, İlker Bekir	Effect of blended cements with natural zeolite and industrial by-products on rebar corrosion and high temperature resistance of concrete	906-911
Wang, Qiang / Yan, Peiyu / Mi, Guidong	Effect of blended steel slag–GBFS mineral admixture on hydration and strength of cement	8-14
Chen, How-Ji / Huang, Shao-Siang / Tang, Chao-Wei / Malek, M. A. / Ean, Lee-Woen	Effect of curing environments on strength, porosity and chloride ingress resistance of blast furnace slag cement concretes: A construction site study	1063-1070
El-Didamony, H. / Heikal, Mohamed / Khalil, Kh. A. / Al-Masry, S.	Effect of delaying addition time of SMF superplasticizer on the physico-mechanical properties and durability of cement pastes	261-269
Yazici, Şemsi / İnan Sezer, Gözde / Şengül, Hakan	The effect of high temperature on the compressive strength of mortars	97-100
Klisińska-Kopacz, Anna / Tišlova, Renata	Effect of hydrophobization treatment on the hydration of repair Roman cement mortars	735-740
Silva, Isabel / Castro-Gomes, João P. / Albuquerque, António	Effect of immersion in water partially alkali-activated materials obtained of tungsten mine waste mud	117-124
Cui, H. Z. / Lo, Tommy Yiu / Memon, Shazim Ali / Xu, Weiting	Effect of lightweight aggregates on the mechanical properties and brittleness of lightweight aggregate concrete	149-158
Leung, Chin K. / Grasley, Zachary C.	Effect of micrometric and nanometric viscoelastic inclusions on mechanical damping behavior of cementitious composites	444-451
Arabani, M. / Azarhoosh, A. R.	The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures	1-7
Alver, Ninel / Selman, Mehmet Efe / Akgun, Osman Burak	The effect of short cantilever beam formation on the structural behavior of precast post-tensioned connections	232-239
González-Corrochano, B. / Alonso-Azcárate, J. / Rodas, M.	Effect of thermal treatment on the retention of chemical elements in the structure of lightweight aggregates manufactured from contaminated mine soil and fly ash	497-507
Wang, Hainian / Dang, Zhengxia / You, Zhanping / Cao, Dongwei	Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders	281-288
Basar, H. Merve / Deveci Aksoy, Nuran	The effect of waste foundry sand (WFS) as partial replacement of sand on the mechanical, leaching and micro-structural characteristics of ready-mixed concrete	508-515
Aggelis, D. G. / Mpalaskas, A. C. / Ntalakas, D. / Matikas, T. E.	Effect of wave distortion on acoustic emission characterization of cementitious materials	183-190
Gürer, Cahit / Karaşahin, Mustafa / Çetin, Sedat / Aktaş, Bekir	Effects of construction-related factors on chip seal performance	605-613
Chen, J. J. / Fung, W. W. S. / Kwan, A. K. H.	Effects of CSF on strength, rheology and cohesiveness of cement paste	979-987
Yilmaz, M. / Tuğrul, A.	The effects of different sandstone aggregates on concrete strength	294-303
Chi, Maochieh	Effects of dosage of alkali-activated solution and curing conditions on the properties and durability of alkali-activated slag concrete	240-245
Li, Qingtao / Li, Zhuguo / Yuan, Guanglin	Effects of elevated temperatures on properties of concrete containing ground granulated blast furnace slag as cementitious material	687-692
Berra, M. / Carassiti, F. / Mangialardi, T. / Paolini, A. E. / Sebastiani, M.	Effects of nanosilica addition on workability and compressive strength of Portland cement pastes	666-675
Shoude, Wang / Cheng, Chen / lingchao, Lu / Xin, Cheng	Effects of slag and limestone powder on the hydration and hardening process of alite-barium calcium sulphoaluminate cement	227-231
Hesami, Ebrahim / Jelagin, Denis / Kringos, Niki / Birgisson, Björn	An empirical framework for determining asphalt mastic viscosity as a function of mineral filler concentration	23-29
Kou, S. C. / Poon, C. S.	Enhancing the durability properties of concrete prepared with coarse recycled aggregate	69-76
Corinaldesi, Valeria	Environmentally-friendly bedding mortars for repair of historical buildings	778-784
Chu, Inyeop / Kwon, Seung Hee / Amin, Muhammad Nasir / Kim, Jin-Keun	Estimation of temperature effects on autogenous shrinkage of concrete by a new prediction model	171-182
Li, Ling / Gong, Meng / Li, Dagang	Evaluation of the slip resistance of modified wood decking products	440-443
Eslami, A. / Ronagh, H. R. / Mahini, S. S. / Morshed, R.	Experimental investigation and nonlinear FE analysis of historical masonry buildings – A case study	251-260
Najimi, Meysam / Sobhani, Jafar / Ahmadi, Babak / Shekarchi, Mohammad	An experimental study on durability properties of concrete containing zeolite as a highly reactive natural pozzolan	1023-1033
Moradias, P. A. / Silva, Pedro D. / Castro-Gomes, J. P. / Salazar, M. V. / Pires, L.	Experimental study on hygrothermal behaviour of retrofit solutions applied to old building walls	864-873
Carbonari, G. / Cavalaro, S. H. P. / Cansario, M. M. / Aguado, A.	Flexural behaviour of light-weight sandwich panels composed by concrete and EPS	792-799
Ahmed, A. / Fried, A.	Flexural strength of low density blockwork	516-520
Orbe, A. / Cuadrado, J. / Losada, R. / Rojí, E.	Framework for the design and analysis of steel fiber reinforced self-compacting concrete structures	676-686
Madandoust, Rahmat / Mousavi, S. Yasin	Fresh and hardened properties of self-compacting concrete containing metakaolin	752-760
Judge, R. / Yang, Z. / Jones, S. W. / Beattie, G.	Full 3D finite element modelling of spiral strand cables	452-459
Zhou, Aiping / Huang, Dongsheng / Li, Haitao / Su, Yi	Hybrid approach to determine the mechanical parameters of fibers and matrixes of bamboo	191-196
Matini Behzad, Hamed / Ashori, Alireza / Tarmian, Asghar / Tajvidi, Mehdi	Impacts of wood preservative treatments on some physico-mechanical properties of wood flour/high density polyethylene composites	246-250
Serna, Ángel / Del Río, Mercedes / Palomo, José Gabriel / González, Mariano	Improvement of gypsum plaster strain capacity by the addition of rubber particles from recycled tyres	633-641
Choi, Seongcheol / Yeon, Jung Heum / Won, Moon C.	Improvements of curing operations for Portland cement concrete pavement	597-604
Sakulich, A. R. / Bentz, D. P.	Incorporation of phase change materials in cementitious systems via fine lightweight aggregate	483-490
Gołaszewski, Jacek	Influence of cement properties on new generation superplasticizers performance	586-596
Kontoleontos, F. / Tsakiridis, P. E. / Marinos, A. / Kaloidas, V. / Katsioti, M.	Influence of colloidal nanosilica on ultrafine cement hydration: Physicochemical and microstructural characterization	347-360
Abd Elhakam, Ali / Mohamed, Abd Elmoaty / Awad, Eslam	Influence of self-healing, mixing method and adding silica fume on mechanical properties of recycled aggregates concrete	421-427
Maia, Lino / Figueiras, Helena / Nunes, Sandra / Azenha, Miguel / Figueiras, Joaquim	Influence of shrinkage reducing admixtures on distinct SCC mix compositions	304-312
Golias, Michael / Castro, Javier / Weiss, Jason	The influence of the initial moisture content of lightweight aggregate on internal curing	52-62
Li, Wengui / Xiao, Jianzhuang / Sun, Zhihui / Kawashima, Shiho / Shah, Surendra P.	Interfacial transition zones in recycled aggregate concrete with different mixing approaches	1045-1055
Wang, Jun-Yan / Yang, Quan-Bing	Investigation on compressive behaviors of thermoplastic pipe confined concrete	578-585
Shu, Xiang / Huang, Baoshan / Shrum, Emily D. / Jia, Xiaoyang	Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP	125-130
Wu, Chenglin / Chen, Genda / Volz, Jeffery S. / Brow, Richard K. / Koenigstein, Michael L.	Local bond strength of vitreous enamel coated rebar to concrete	428-439
Bui, Le Anh-tuan / Hwang, Chao-Lung / Chen, Chun-tsun / Lin, Kae-Long / Hsieh, Meng-ying	Manufacture and performance of cold bonded lightweight aggregate using alkaline activators for high performance concrete	1056-1062
Naghizadeh, Zahra / Faezipour, Mehdi / Ebrahimi, Ghanbar / Hamzeh, Yahya	Manufacture of lignocellulosic fiber–cement boards containing foaming agent	408-413
Pérez-Villarejo, L. / Corpas-Iglesias, F. A. / Martínez-Martínez, S. / Artiaga, R. / Pascual-Cosp, J.	Manufacturing new ceramic materials from clay and red mud derived from the aluminium industry	656-665
Mojsilović, Nebojša	Masonry elements with damp-proof course membrane: Assessment of shear strength parameters	1002-1012
Katzer, Jacek	Median diameter as a grading characteristic for fine aggregate cement composite designing	884-887
Matějka, V. / Matějková, P. / Kovář, P. / Vlček, J. / Přikryl, J. / Červenka, P. / Lacný, Z. / Kukutschová, J.	Metakaolinite/TiO2 composite: Photoactive admixture for building materials based on Portland cement binder	38-44
Cannone Falchetto, Augusto / Montepara, Antonio / Tebaldi, Gabriele / Marasteanu, Mihai O.	Microstructural and rheological investigation of asphalt mixtures containing recycled asphalt materials	321-329
Tang, Fujian / Chen, Genda / Volz, Jeffery S. / Brow, Richard K. / Koenigstein, Mike	Microstructure and corrosion resistance of enamel coatings applied to smooth reinforcing steel	376-384
Mohammed, Bashar S. / Fang, Ong Chuan / Hossain, Khandaker M. Anwar / Lachemi, Mohamed	Mix proportioning of concrete containing paper mill residuals using response surface methodology	63-68
Dongyu, Xu / Shifeng, Huang / Lei, Qin / lingchao, Lu / Xin, Cheng	Monitoring of cement hydration reaction process based on ultrasonic technique of piezoelectric composite transducer	220-226
Lignola, Gian Piero / Prota, Andrea / Manfredi, Gaetano / Cosenza, Edoardo	Multiscale non-linear analysis of RC hollow piers wrapped with CFRP under shear-type load	947-959
Ben Fraj, Amor / Bonnet, Stéphanie / Khelidj, Abdelhafid	New approach for coupled chloride/moisture transport in non-saturated concrete with and without slag	761-771
Costa, Hugo / Júlio, Eduardo / Lourenço, Jorge	New approach for shrinkage prediction of high-strength lightweight aggregate concrete	84-91
Sadique, Monower / Nageim, Hassan Al / Atherton, William / Seton, Linda / Dempster, Nicola	A new composite cementitious material for construction	846-855
Mostofinejad, Davood / Reisi, Mohammad	A new DEM-based method to predict packing density of coarse aggregates considering their grading and shapes	414-420
Vázquez-Herrero, Cristina / Martínez-Lage, Isabel / Sánchez-Tembleque, Félix	A new procedure to ensure structural safety based on the maturity method and limit state theory	393-398
Hassan, A. M. T. / Jones, S. W.	Non-destructive testing of ultra high performance fibre reinforced concrete (UHPFRC): A feasibility study for using ultrasonic and resonant frequency testing techniques	361-367
Lou, Tiejiong / Lopes, Sergio M. R. / Lopes, Adelino V.	Numerical analysis of behaviour of concrete beams with external FRP tendons	970-978
Zhu, Xing-yi / Chen, Long	Numerical prediction of elastic modulus of asphalt concrete with imperfect bonding	45-51
Abu Al-Rub, Rashid K. / Ashour, Ahmad I. / Tyson, Bryan M.	On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites	647-655
Baltazar, Luis G. / Henriques, Fernando M. A. / Jorne, Fernando	Optimisation of flow behaviour and stability of superplasticized fresh hydraulic lime grouts through design of experiments	838-845
Criado, M. / Monticelli, C. / Fajardo, S. / Gelli, D. / Grassi, V. / Bastidas, J. M.	Organic corrosion inhibitor mixtures for reinforcing steel embedded in carbonated alkali-activated fly ash mortar	30-37
Anil, Özgür / Tatayoğlu, Muhammed / Demirhan, Murat	Out-of-plane behavior of unreinforced masonry brick walls strengthened with CFRP strips	614-624
Golestani, Behnam / Nejad, Fereidoon Moghadas / Galooyak, Saeed Sadeghpour	Performance evaluation of linear and nonlinear nanocomposite modified asphalts	197-203
Yao, Hui / You, Zhanping / Li, Liang / Shi, Xianming / Goh, Shu Wei / Mills-Beale, Julian / Wingard, David	Performance of asphalt binder blended with non-modified and polymer-modified nanoclay	159-170
Shen, Shihui / Burton, Maria / Jobson, Bertram / Haselbach, Liv	Pervious concrete with titanium dioxide as a photocatalyst compound for a greener urban road environment	874-883
Wang, Y. / Wang, X. Y. / Scholz, M. / Ross, D. K.	A physico-chemical model for the water vapour sorption isotherm of hardened cementitious materials	941-946
Eko, Robert Medjo / Offa, Engelbert Dieudonné / Yatchoupou Ngatcha, Thierry / Seba Minsili, Lezin	Potential of salvaged steel fibers for reinforcement of unfired earth blocks	340-346
Jiang, Jianhua / Yuan, Yingshu	Prediction model for the time-varying corrosion rate of rebar based on micro-environment in concrete	625-632
El-Didamony, H. / Khalil, Kh. A. / Ahmed, I. A. / Heikal, Mohamed	Preparation of β-dicalcium silicate (β-C2S) and calcium sulfoaluminate phases using non-traditional nano-materials	77-83
Ahmari, Saeed / Ren, Xin / Toufigh, Vahab / Zhang, Lianyang	Production of geopolymeric binder from blended waste concrete powder and fly ash	718-729
Lim, N. G. / Jeong, S. W. / Her, J. W. / Ann, K. Y.	Properties of cement-free concrete cast by finely grained nanoslag with the NaOH-based alkali activator	557-563
Sadrmomtazi, A. / Sobhani, J. / Mirgozar, M. A. / Najimi, M.	Properties of multi-strength grade EPS concrete containing silica fume and rice husk ash	211-219
Tuyan, Murat / Yazıcı, Halit	Pull-out behavior of single steel fiber from SIFCON matrix	571-577
Ech, M. / Yotte, S. / Morel, S. / Breysse, D. / Pouteau, B.	Qualification of wearing course material surface evolution after durability test	313-320
Ferrari, L. / Kaufmann, J. / Winnefeld, F. / Plank, J.	Reaction of clinker surfaces investigated with atomic force microscopy	92-96
Cizer, Özlem / Van Balen, Koen / Elsen, Jan / Van Gemert, Dionys	Real-time investigation of reaction rate and mineral phase modifications of lime carbonation	741-751
Hoffmann, Cathleen / Schubert, Sandy / Leemann, Andreas / Motavalli, Masoud	Recycled concrete and mixed rubble as aggregates: Influence of variations in composition on the concrete properties and their use as structural material	701-709
Ali, Esraa Emam / Al-Tersawy, Sherif H.	Recycled glass as a partial replacement for fine aggregate in self compacting concrete	785-791
Onoue, Kozo / Matsushita, Hiromichi	Reduction mechanisms of static compressive strength in concrete due to permeation of liquids	808-816
Oliveira, Joel R. M. / Silva, Hugo M. R. D. / Abreu, Liliana P. F. / Gonzalez-Leon, Juan A.	The role of a surfactant based additive on the production of recycled warm mix asphalts – Less is more	693-700
Xiao, Jianzhuang / Huang, Xiao / Shen, Luming	Seismic behavior of semi-precast column with recycled aggregate concrete	988-1001
Bogas, J. Alexandre / Gomes, Augusto / Pereira, M. F. C.	Self-compacting lightweight concrete produced with expanded clay aggregate	1013-1022
Jensen, Jørgen L. / Quenneville, Pierre / Girhammar, Ulf Arne / Källsner, Bo	Splitting of timber beams loaded perpendicular to grain by connections – Combined effect of edge and end distance	289-293
Franzoni, Elisa / Bandini, Simone	Spontaneous electrical effects in masonry affected by capillary water rise: The role of salts	642-646
Cadoni, Ezio / Fenu, Luigi / Forni, Daniele	Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars	399-407
Campione, Giuseppe	Strength and ductility of R.C. columns strengthened with steel angles and battens	800-807
Awwad, Elie / Mabsout, Mounir / Hamad, Bilal / Farran, Mohamad Talal / Khatib, Helmi	Studies on fiber-reinforced concrete using industrial hemp fibers	710-717
Vanhove, Y. / Djelal, C. / Schwendenmann, G. / Brisset, P.	Study of self consolidating concretes stability during their placement	101-108
Sandoval, Cristián / Roca, Pere	Study of the influence of different parameters on the buckling behaviour of masonry walls	888-899
Heah, C. Y. / Kamarudin, H. / Mustafa Al Bakri, A. M. / Bnhussain, M. / Luqman, M. / Khairul Nizar, I. / Ruzaidi, C. M. / Liew, Y. M.	Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers	912-922
Garcez, Nuno / Lopes, Nuno / de Brito, Jorge / Silvestre, José	System of inspection, diagnosis and repair of external claddings of pitched roofs	1034-1044
Demirboğa, Ramazan / Kan, Abdulkadir	Thermal conductivity and shrinkage properties of modified waste polystyrene aggregate concretes	730-734
Pilkington, Brian / Grove, Stephen	Thermal conductivity probe length to radius ratio problem when measuring building insulation materials	531-546
Zhang, Zhiwei / Qian, Jueshi / You, Chao / Hu, Changhua	Use of circulating fluidized bed combustion fly ash and slag in autoclaved brick	109-116
Zentar, Rachid / Wang, Dongxing / Abriak, Nor Edine / Benzerzour, Mahfoud / Chen, Wenzhao	Utilization of siliceous–aluminous fly ash and cement for solidification of marine sediments	856-863
Qian, Chunxiang / Huang, Bei / Wang, Yujiang / Wu, Miao	Water seepage flow in concrete	491-496
Gaggino, Rosana	Water-resistant panels made from recycled plastics and resin	468-482

Über diese
Datenseite
IssueID
22501
Veröffentlicht am:
16.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.