Construction and Building Materials - September 2012

Published:	September 2012

Articles in this Issue

Author(s)	Title	Page(s)
Bangaru, Raja Sekhar / Das, Animesh	Aggregate shape characterization in frequency domain	554-560
Yoo, Sung Won / Kwon, Seung-Jun / Jung, Sang Hwa	Analysis technique for autogenous shrinkage in high performance concrete with mineral and chemical admixtures	1-10
Xu, B. H. / Bouchaïr, A. / Racher, P.	Analytical study and finite element modelling of timber connections with glued-in rods in bending	337-345
Aksoy, Atakan / Iskender, Erol / Tolga Kahraman, H.	Application of the intuitive k-NN Estimator for prediction of the Marshall Test (ASTM D1559) results for asphalt mixtures	561-569
Zhu, Yu / Yang, Yingzi / Yao, Yan	Autogenous self-healing of engineered cementitious composites under freeze–thaw cycles	522-530
Peyton, Steve W. / Sanders, Chris L. / John, Emerson E. / Hale, W. Micah	Bridge deck cracking: A field study on concrete placement, curing, and performance	70-76
Pinto, Jorge / Cruz, Daniel / Paiva, Anabela / Pereira, Sandra / Tavares, Pedro / Fernandes, Lisete / Varum, Humberto	Characterization of corn cob as a possible raw building material	28-33
Shirodkar, Prashant / Mehta, Yusuf / Nolan, Aaron / Dahm, Kevin / Dusseau, Ralph / McCarthy, Leslie	Characterization of creep and recovery curve of polymer modified binder	504-511
Rouchier, Simon / Janssen, Hans / Rode, Carsten / Woloszyn, Monika / Foray, Geneviève / Roux, Jean-Jacques	Characterization of fracture patterns and hygric properties for moisture flow modelling in cracked concrete	54-62
Lee, Guncheol / Han, Dongyeop / Han, Min-Cheol / Han, Cheon-Goo / Son, Ho-Jeong	Combining polypropylene and nylon fibers to optimize fiber addition for spalling protection of high-strength concrete	313-320
Iervolino, Iunio / Galasso, Carmine	Comparative assessment of load–resistance factor design of FRP-reinforced cross sections	151-161
Gutiérrez-González, S. / Gadea, J. / Rodríguez, A. / Blanco-Varela, M. T. / Calderón, V.	Compatibility between gypsum and polyamide powder waste to produce lightweight plaster with enhanced thermal properties	179-185
Andreev, K. / Sinnema, S. / Rekik, A. / Allaoui, S. / Blond, E. / Gasser, A.	Compressive behaviour of dry joints in refractory ceramic masonry	402-408
Nematzadeh, M. / Naghipour, M.	Compressive strength and modulus of elasticity of freshly compressed concrete	476-485
Sümer, Mansur	Compressive strength and sulfate resistance properties of concretes containing Class F and Class C fly ashes	531-536
Mas, Benito / Cladera, Antoni / Bestard, Jeroni / Muntaner, Denis / López, Catalina Elena / Piña, Silvia / Prades, Jesús	Concrete with mixed recycled aggregates: Influence of the type of cement	430-441
Omikrine Metalssi, Othman / Aït-Mokhtar, Abdelkarim / Turcry, Philippe / Ruot, Bertrand	Consequences of carbonation on microstructure and drying shrinkage of a mortar with cellulose ether	218-225
Pinto, Jorge / Vieira, Barbosa / Pereira, Hélder / Jacinto, Carlos / Vilela, Paulo / Paiva, Anabela / Pereira, Sandra / Cunha, Vítor M. C. F. / Varum, Humberto	Corn cob lightweight concrete for non-structural applications	346-351
Chen, Wei / Shen, Peiliang / Shui, Zhonghe	Determination of water content in fresh concrete mix based on relative dielectric constant measurement	306-312
Soroushian, Parviz / Won, Jong-Pil / Hassan, Maan	Durability characteristics of CO2-cured cellulose fiber reinforced cement composites	44-53
Uysal, Mucteba / Akyüncü, Veysel	Durability performance of concrete incorporating Class F and Class C fly ashes	170-178
Giussani, Francesca / Mola, Franco	Durable concrete pavements: The reconstruction of runway head 36R of Milano Linate International Airport	352-361
Moghaddam, Taher Baghaee / Karim, Mohamed Rehan / Syammaun, Tamalkhani	Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles	236-242
Maia, Lino / Figueiras, Joaquim	Early-age creep deformation of a high strength self-compacting concrete	602-610
Shukla, S. R. / Kamdem, D. P.	Effect of copper based preservatives treatment of the properties of southern pine LVL	593-601
Huang, Long-Sheng / Lin, Deng-Fong / Luo, Huan-Lin / Lin, Ping-Chuang	Effect of field compaction mode on asphalt mixture concrete with basic oxygen furnace slag	16-27
de Arteaga, I. / Morer, P.	The effect of geometry on the structural capacity of masonry arch bridges	97-106
Khodaii, A. / Haghshenas, H. F. / Kazemi Tehrani, H.	Effect of grading and lime content on HMA stripping using statistical methodology	131-135
Promis, G. / Gabor, A. / Hamelin, P.	Effect of post-tensioning on the bending behaviour of mineral matrix composite beams	442-450
Bentchikou, Mohamed / Guidoum, Amor / Scrivener, Karen / Silhadi, Kamel / Hanini, Salah	Effect of recycled cellulose fibres on the properties of lightweight cement composite matrix	451-456
Shuguang, Hu / Yunhua, Zhang / Fazhou, Wang	Effect of temperature and pressure on the degradation of cement asphalt mortar exposed to water	570-574
Pathak, Neelam / Siddique, Rafat	Effects of elevated temperatures on properties of self-compacting-concrete containing fly ash and spent foundry sand	512-521
Soroushian, Parviz / Hassan, Maan	Evaluation of cement-bonded strawboard against alternative cement-based siding products	77-82
Aliabdo, Ali Abd Elhakam / Abd Elmoaty, Abd Elmoaty Mohamed	Experimental investigation on the properties of polymer modified SCC	584-592
Petit, C. / Millien, A. / Canestrari, F. / Pannunzio, V. / Virgili, A.	Experimental study on shear fatigue behavior and stiffness performance of Warm Mix Asphalt by adding synthetic wax	537-544
Xiao, Yan / Ma, Jian	Fire simulation test and analysis of laminated bamboo frame building	257-266
Bajer, Miroslav / Barnat, Jan	The glue–concrete interface of bonded anchors	267-274
Safarzadegan Gilan, Siamak / Bahrami Jovein, Hamed / Ramezanianpour, Ali Akbar	Hybrid support vector regression – Particle swarm optimization for prediction of compressive strength and RCPT of concretes containing metakaolin	321-329
Sweet, Joseph G. / Chen, Hung-Liang (Roger)	Implementation of self-consolidating concrete in caisson construction for the Stalnaker Run Bridge	545-553
Andiç-Çakir, Özge / Hızal, Selim	Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete	575-583
Soive, A. / Baroghel-Bouny, V.	Influence of gravel distribution on the variability of chloride penetration front in saturated uncracked concrete	63-69
Yoshihara, Hiroshi	Interlaminar shear strength of medium-density fiberboard obtained from asymmetrical four-point bending tests	11-15
Zhang, Dong / Huang, Xiaoming / Zhao, Yongli	Investigation of the shape, size, angularity and surface texture properties of coarse aggregates	330-336
Atamturktur, Sez / Li, Tun / Ramage, Michael H. / Farajpour, Ismail	Load carrying capacity assessment of a scaled masonry dome: Simulations validated with non-destructive and destructive measurements	418-429
Talesnick, Mark / Katz, Amnon	Measuring lateral pressure of concrete: From casting through hardening	211-217
Sebaibi, Nassim / Benzerzour, Mahfoud / Abriak, Nor-Edine / Binetruy, Christophe	Mechanical and physical properties of a cement matrix through the recycling of thermoset composites	226-235
Garcés, Pedro / Zornoza, E. / Alcocel, E. Ga. / Galao, Ó. / Andión, L. Ga.	Mechanical properties and corrosion of CAC mortars with carbon fibers	91-96
Kuder, Katherine / Lehman, Dawn / Berman, Jeffrey / Hannesson, Gudmundur / Shogren, Rob	Mechanical properties of self consolidating concrete blended with high volumes of fly ash and slag	285-295
Grabiec, Anna M. / Klama, Justyna / Zawal, Daniel / Krupa, Daria	Modification of recycled concrete aggregate by calcium carbonate biodeposition	145-150
Haghani, Reza / Al-Emrani, Mohammad	A new design model for adhesive joints used to bond FRP laminates to steel beams – Part A: Background and theory	486-493
Calabrese, L. / Campanella, G. / Proverbio, E.	Noise removal by cluster analysis after long time AE corrosion monitoring of steel reinforcement in concrete	362-371
Courard, L. / Gillard, A. / Darimont, A. / Bleus, J. M. / Paquet, P.	Pathologies of concrete in Saint-Vincent Neo-Byzantine Church and Pauchot reinforced artificial stone	201-210
Abu-Eishah, Samir I. / El-Dieb, Amr S. / Bedir, Mostafa S.	Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region	249-256
Tabatabaee, Hassan A. / Velasquez, Raul / Bahia, Hussain U.	Predicting low temperature physical hardening in asphalt binders	162-169
Zhang, Xiong / Zhao, Ming / Zhang, Yongjuan	Preparation and properties of self-pulverizing calcium sulfoaluminate cement	107-113
Azevedo, F. / Pacheco-Torgal, F. / Jesus, C. / Barroso de Aguiar, J. L. / Camões, A. F.	Properties and durability of HPC with tyre rubber wastes	186-191
Katzer, Jacek / Domski, Jacek	Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete	243-248
Eliche-Quesada, D. / Corpas-Iglesias, F. A. / Pérez-Villarejo, L. / Iglesias-Godino, F. J.	Recycling of sawdust, spent earth from oil filtration, compost and marble residues for brick manufacturing	275-284
Rajput, D. / Bhagade, S. S. / Raut, S. P. / Ralegaonkar, R. V. / Mandavgane, Sachin A.	Reuse of cotton and recycle paper mill waste as building material	470-475
Yaqub, M. / Bailey, C. G.	Seismic performance of shear critical post-heated reinforced concrete square columns wrapped with FRP composites	457-469
Brites, Ricardo D. / Lourenço, Paulo B. / Saporiti Machado, J.	A semi-destructive tension method for evaluating the strength and stiffness of clear wood zones of structural timber elements in-service	136-144
Kim, Hyeong-Yeol / Lee, Sang-Yoon	A steel-reinforced hybrid GFRP deck panel for temporary bridges	192-200
Güneyisi, Erhan / Gesoǧlu, Mehmet / Karaoğlu, Seda / Mermerdaş, Kasım	Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes	120-130
Veiga, K. K. / Gastaldini, A. L. G.	Sulfate attack on a white Portland cement with activated slag	494-503
Kocevski, Saso / Yagneswaran, Sriram / Xiao, Feipeng / Punith, V. S. / Smith, Dennis W. / Amirkhanian, Serji	Surface modified ground rubber tire by grafting acrylic acid for paving applications	83-90
Zhang, Weiping / Song, Xiaobin / Gu, Xianglin / Li, Shibin	Tensile and fatigue behavior of corroded rebars	409-417
Quagliarini, Enrico / Monni, Francesco / Lenci, Stefano / Bondioli, Federica	Tensile characterization of basalt fiber rods and ropes: A first contribution	372-380
	Use of clay as a cement replacement in mortar and its chemical activation to reduce the cost and emission of greenhouse gases	381-384
Jiménez, J. R. / Ayuso, J. / Galvin, A. P. / Lopez, M. / Agrela, F.	Use of mixed recycled aggregates with a low embodied energy from non-selected CDW in unpaved rural roads	34-43
Saikia, Nabajyoti / de Brito, Jorge	Use of plastic waste as aggregate in cement mortar and concrete preparation: A review	385-401
Alavez-Ramírez, Rafael / Montes-Garcia, Pedro / Martinez-Reyes, Jacobo / Altamirano-Juárez, Delia Cristina / Gochi-Ponce, Yadira	The use of sugarcane bagasse ash and lime to improve the durability and mechanical properties of compacted soil blocks	296-305
Zhou, Jun / Gao, Hui / Shu, Zhu / Wang, Yanxin / Yan, Chunjie	Utilization of waste phosphogypsum to prepare non-fired bricks by a novel Hydration–Recrystallization process	114-119

About this
data sheet
IssueID
22500
Published on:
16/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2012

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2012

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.