Construction and Building Materials - September 2012

Erschienen:	September 2012

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Bangaru, Raja Sekhar / Das, Animesh	Aggregate shape characterization in frequency domain	554-560
Yoo, Sung Won / Kwon, Seung-Jun / Jung, Sang Hwa	Analysis technique for autogenous shrinkage in high performance concrete with mineral and chemical admixtures	1-10
Xu, B. H. / Bouchaïr, A. / Racher, P.	Analytical study and finite element modelling of timber connections with glued-in rods in bending	337-345
Aksoy, Atakan / Iskender, Erol / Tolga Kahraman, H.	Application of the intuitive k-NN Estimator for prediction of the Marshall Test (ASTM D1559) results for asphalt mixtures	561-569
Zhu, Yu / Yang, Yingzi / Yao, Yan	Autogenous self-healing of engineered cementitious composites under freeze–thaw cycles	522-530
Peyton, Steve W. / Sanders, Chris L. / John, Emerson E. / Hale, W. Micah	Bridge deck cracking: A field study on concrete placement, curing, and performance	70-76
Pinto, Jorge / Cruz, Daniel / Paiva, Anabela / Pereira, Sandra / Tavares, Pedro / Fernandes, Lisete / Varum, Humberto	Characterization of corn cob as a possible raw building material	28-33
Shirodkar, Prashant / Mehta, Yusuf / Nolan, Aaron / Dahm, Kevin / Dusseau, Ralph / McCarthy, Leslie	Characterization of creep and recovery curve of polymer modified binder	504-511
Rouchier, Simon / Janssen, Hans / Rode, Carsten / Woloszyn, Monika / Foray, Geneviève / Roux, Jean-Jacques	Characterization of fracture patterns and hygric properties for moisture flow modelling in cracked concrete	54-62
Lee, Guncheol / Han, Dongyeop / Han, Min-Cheol / Han, Cheon-Goo / Son, Ho-Jeong	Combining polypropylene and nylon fibers to optimize fiber addition for spalling protection of high-strength concrete	313-320
Iervolino, Iunio / Galasso, Carmine	Comparative assessment of load–resistance factor design of FRP-reinforced cross sections	151-161
Gutiérrez-González, S. / Gadea, J. / Rodríguez, A. / Blanco-Varela, M. T. / Calderón, V.	Compatibility between gypsum and polyamide powder waste to produce lightweight plaster with enhanced thermal properties	179-185
Andreev, K. / Sinnema, S. / Rekik, A. / Allaoui, S. / Blond, E. / Gasser, A.	Compressive behaviour of dry joints in refractory ceramic masonry	402-408
Nematzadeh, M. / Naghipour, M.	Compressive strength and modulus of elasticity of freshly compressed concrete	476-485
Sümer, Mansur	Compressive strength and sulfate resistance properties of concretes containing Class F and Class C fly ashes	531-536
Mas, Benito / Cladera, Antoni / Bestard, Jeroni / Muntaner, Denis / López, Catalina Elena / Piña, Silvia / Prades, Jesús	Concrete with mixed recycled aggregates: Influence of the type of cement	430-441
Omikrine Metalssi, Othman / Aït-Mokhtar, Abdelkarim / Turcry, Philippe / Ruot, Bertrand	Consequences of carbonation on microstructure and drying shrinkage of a mortar with cellulose ether	218-225
Pinto, Jorge / Vieira, Barbosa / Pereira, Hélder / Jacinto, Carlos / Vilela, Paulo / Paiva, Anabela / Pereira, Sandra / Cunha, Vítor M. C. F. / Varum, Humberto	Corn cob lightweight concrete for non-structural applications	346-351
Chen, Wei / Shen, Peiliang / Shui, Zhonghe	Determination of water content in fresh concrete mix based on relative dielectric constant measurement	306-312
Soroushian, Parviz / Won, Jong-Pil / Hassan, Maan	Durability characteristics of CO2-cured cellulose fiber reinforced cement composites	44-53
Uysal, Mucteba / Akyüncü, Veysel	Durability performance of concrete incorporating Class F and Class C fly ashes	170-178
Giussani, Francesca / Mola, Franco	Durable concrete pavements: The reconstruction of runway head 36R of Milano Linate International Airport	352-361
Moghaddam, Taher Baghaee / Karim, Mohamed Rehan / Syammaun, Tamalkhani	Dynamic properties of stone mastic asphalt mixtures containing waste plastic bottles	236-242
Maia, Lino / Figueiras, Joaquim	Early-age creep deformation of a high strength self-compacting concrete	602-610
Shukla, S. R. / Kamdem, D. P.	Effect of copper based preservatives treatment of the properties of southern pine LVL	593-601
Huang, Long-Sheng / Lin, Deng-Fong / Luo, Huan-Lin / Lin, Ping-Chuang	Effect of field compaction mode on asphalt mixture concrete with basic oxygen furnace slag	16-27
de Arteaga, I. / Morer, P.	The effect of geometry on the structural capacity of masonry arch bridges	97-106
Khodaii, A. / Haghshenas, H. F. / Kazemi Tehrani, H.	Effect of grading and lime content on HMA stripping using statistical methodology	131-135
Promis, G. / Gabor, A. / Hamelin, P.	Effect of post-tensioning on the bending behaviour of mineral matrix composite beams	442-450
Bentchikou, Mohamed / Guidoum, Amor / Scrivener, Karen / Silhadi, Kamel / Hanini, Salah	Effect of recycled cellulose fibres on the properties of lightweight cement composite matrix	451-456
Shuguang, Hu / Yunhua, Zhang / Fazhou, Wang	Effect of temperature and pressure on the degradation of cement asphalt mortar exposed to water	570-574
Pathak, Neelam / Siddique, Rafat	Effects of elevated temperatures on properties of self-compacting-concrete containing fly ash and spent foundry sand	512-521
Soroushian, Parviz / Hassan, Maan	Evaluation of cement-bonded strawboard against alternative cement-based siding products	77-82
Aliabdo, Ali Abd Elhakam / Abd Elmoaty, Abd Elmoaty Mohamed	Experimental investigation on the properties of polymer modified SCC	584-592
Petit, C. / Millien, A. / Canestrari, F. / Pannunzio, V. / Virgili, A.	Experimental study on shear fatigue behavior and stiffness performance of Warm Mix Asphalt by adding synthetic wax	537-544
Xiao, Yan / Ma, Jian	Fire simulation test and analysis of laminated bamboo frame building	257-266
Bajer, Miroslav / Barnat, Jan	The glue–concrete interface of bonded anchors	267-274
Safarzadegan Gilan, Siamak / Bahrami Jovein, Hamed / Ramezanianpour, Ali Akbar	Hybrid support vector regression – Particle swarm optimization for prediction of compressive strength and RCPT of concretes containing metakaolin	321-329
Sweet, Joseph G. / Chen, Hung-Liang (Roger)	Implementation of self-consolidating concrete in caisson construction for the Stalnaker Run Bridge	545-553
Andiç-Çakir, Özge / Hızal, Selim	Influence of elevated temperatures on the mechanical properties and microstructure of self consolidating lightweight aggregate concrete	575-583
Soive, A. / Baroghel-Bouny, V.	Influence of gravel distribution on the variability of chloride penetration front in saturated uncracked concrete	63-69
Yoshihara, Hiroshi	Interlaminar shear strength of medium-density fiberboard obtained from asymmetrical four-point bending tests	11-15
Zhang, Dong / Huang, Xiaoming / Zhao, Yongli	Investigation of the shape, size, angularity and surface texture properties of coarse aggregates	330-336
Atamturktur, Sez / Li, Tun / Ramage, Michael H. / Farajpour, Ismail	Load carrying capacity assessment of a scaled masonry dome: Simulations validated with non-destructive and destructive measurements	418-429
Talesnick, Mark / Katz, Amnon	Measuring lateral pressure of concrete: From casting through hardening	211-217
Sebaibi, Nassim / Benzerzour, Mahfoud / Abriak, Nor-Edine / Binetruy, Christophe	Mechanical and physical properties of a cement matrix through the recycling of thermoset composites	226-235
Garcés, Pedro / Zornoza, E. / Alcocel, E. Ga. / Galao, Ó. / Andión, L. Ga.	Mechanical properties and corrosion of CAC mortars with carbon fibers	91-96
Kuder, Katherine / Lehman, Dawn / Berman, Jeffrey / Hannesson, Gudmundur / Shogren, Rob	Mechanical properties of self consolidating concrete blended with high volumes of fly ash and slag	285-295
Grabiec, Anna M. / Klama, Justyna / Zawal, Daniel / Krupa, Daria	Modification of recycled concrete aggregate by calcium carbonate biodeposition	145-150
Haghani, Reza / Al-Emrani, Mohammad	A new design model for adhesive joints used to bond FRP laminates to steel beams – Part A: Background and theory	486-493
Calabrese, L. / Campanella, G. / Proverbio, E.	Noise removal by cluster analysis after long time AE corrosion monitoring of steel reinforcement in concrete	362-371
Courard, L. / Gillard, A. / Darimont, A. / Bleus, J. M. / Paquet, P.	Pathologies of concrete in Saint-Vincent Neo-Byzantine Church and Pauchot reinforced artificial stone	201-210
Abu-Eishah, Samir I. / El-Dieb, Amr S. / Bedir, Mostafa S.	Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region	249-256
Tabatabaee, Hassan A. / Velasquez, Raul / Bahia, Hussain U.	Predicting low temperature physical hardening in asphalt binders	162-169
Zhang, Xiong / Zhao, Ming / Zhang, Yongjuan	Preparation and properties of self-pulverizing calcium sulfoaluminate cement	107-113
Azevedo, F. / Pacheco-Torgal, F. / Jesus, C. / Barroso de Aguiar, J. L. / Camões, A. F.	Properties and durability of HPC with tyre rubber wastes	186-191
Katzer, Jacek / Domski, Jacek	Quality and mechanical properties of engineered steel fibres used as reinforcement for concrete	243-248
Eliche-Quesada, D. / Corpas-Iglesias, F. A. / Pérez-Villarejo, L. / Iglesias-Godino, F. J.	Recycling of sawdust, spent earth from oil filtration, compost and marble residues for brick manufacturing	275-284
Rajput, D. / Bhagade, S. S. / Raut, S. P. / Ralegaonkar, R. V. / Mandavgane, Sachin A.	Reuse of cotton and recycle paper mill waste as building material	470-475
Yaqub, M. / Bailey, C. G.	Seismic performance of shear critical post-heated reinforced concrete square columns wrapped with FRP composites	457-469
Brites, Ricardo D. / Lourenço, Paulo B. / Saporiti Machado, J.	A semi-destructive tension method for evaluating the strength and stiffness of clear wood zones of structural timber elements in-service	136-144
Kim, Hyeong-Yeol / Lee, Sang-Yoon	A steel-reinforced hybrid GFRP deck panel for temporary bridges	192-200
Güneyisi, Erhan / Gesoǧlu, Mehmet / Karaoğlu, Seda / Mermerdaş, Kasım	Strength, permeability and shrinkage cracking of silica fume and metakaolin concretes	120-130
Veiga, K. K. / Gastaldini, A. L. G.	Sulfate attack on a white Portland cement with activated slag	494-503
Kocevski, Saso / Yagneswaran, Sriram / Xiao, Feipeng / Punith, V. S. / Smith, Dennis W. / Amirkhanian, Serji	Surface modified ground rubber tire by grafting acrylic acid for paving applications	83-90
Zhang, Weiping / Song, Xiaobin / Gu, Xianglin / Li, Shibin	Tensile and fatigue behavior of corroded rebars	409-417
Quagliarini, Enrico / Monni, Francesco / Lenci, Stefano / Bondioli, Federica	Tensile characterization of basalt fiber rods and ropes: A first contribution	372-380
	Use of clay as a cement replacement in mortar and its chemical activation to reduce the cost and emission of greenhouse gases	381-384
Jiménez, J. R. / Ayuso, J. / Galvin, A. P. / Lopez, M. / Agrela, F.	Use of mixed recycled aggregates with a low embodied energy from non-selected CDW in unpaved rural roads	34-43
Saikia, Nabajyoti / de Brito, Jorge	Use of plastic waste as aggregate in cement mortar and concrete preparation: A review	385-401
Alavez-Ramírez, Rafael / Montes-Garcia, Pedro / Martinez-Reyes, Jacobo / Altamirano-Juárez, Delia Cristina / Gochi-Ponce, Yadira	The use of sugarcane bagasse ash and lime to improve the durability and mechanical properties of compacted soil blocks	296-305
Zhou, Jun / Gao, Hui / Shu, Zhu / Wang, Yanxin / Yan, Chunjie	Utilization of waste phosphogypsum to prepare non-fired bricks by a novel Hydration–Recrystallization process	114-119

Über diese
Datenseite
IssueID
22500
Veröffentlicht am:
16.12.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - September 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - September 2012

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.