Construction and Building Materials - January 2012

Published:	January 2012

Articles in this Issue

Author(s)	Title	Page(s)
He, Fuqiang / Shi, Caijun / Yuan, Qiang / Chen, Changping / Zheng, Keren	AgNO3-based colorimetric methods for measurement of chloride penetration in concrete	1-8
Barfield, Mary / Ghafoori, Nader	Air-entrained self-consolidating concrete: A study of admixture sources	490-496
Maksimović, Mirjana / Stojanović, Goran M. / Radovanović, Milan / Malešev, Mirjana / Radonjanin, Vlastimir / Radosavljević, Goran / Smetana, Walter	Application of a LTCC sensor for measuring moisture content of building materials	327-333
Pérez-Jiménez, Félix / Valdés, Gonzalo A. / Botella, Ramón / Miró, Rodrigo / Martínez, Adriana	Approach to fatigue performance using Fénix test for asphalt mixtures	372-380
Tam, C. M. / Tam, Vivian W. Y. / Ng, K. M.	Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong Kong	79-89
Pelletier-Chaignat, Laure / Winnefeld, Frank / Lothenbach, Barbara / Müller, Christian Jörg	Beneficial use of limestone filler with calcium sulphoaluminate cement	619-627
Rahmanian, I. / Wang, Y. C.	A combined experimental and numerical method for extracting temperature-dependent thermal conductivity of gypsum boards	707-722
Bozorg-Haddad, Amir / Iskander, Magued / Chen, Yufan	Compressive strength and creep of recycled HDPE used to manufacture polymeric piling	505-515
Higashiyama, Hiroshi / Yagishita, Fumio / Sano, Masanori / Takahashi, Osamu	Compressive strength and resistance to chloride penetration of mortars using ceramic waste as fine aggregate	96-101
İnan Sezer, Gözde	Compressive strength and sulfate resistance of limestone and/or silica fume mortars	613-618
Veludo, J. / Júlio, E. N. B. S. / Dias-Da-Costa, D.	Compressive strength of micropile-to-grout connections	172-179
Zhang, Dawei / Ueda, Tamon / Furuuchi, Hitoshi	Concrete cover separation failure of overlay-strengthened reinforced concrete beams	735-745
Colbert, Baron / You, Zhanping	The determination of mechanical performance of laboratory produced hot mix asphalt mixtures using controlled RAP and virgin aggregate size fractions	655-662
Kim, Hyunwook / Partl, Manfred N.	Development of a double-torsion fracture test to predict channelized crack behaviors of asphalt concrete	694-700
Ajagbe, Wasiu O. / Omokehinde, Olusola S. / Alade, Gabriel A. / Agbede, Oluwole A.	Effect of Crude Oil Impacted Sand on compressive strength of concrete	9-12
Zhang, Henglong / Yu, Jianying / Kuang, Dongliang	Effect of expanded vermiculite on aging properties of bitumen	244-248
Shi, Caijun / He, Fuqiang / Wu, Yanzhong	Effect of pre-conditioning on CO2 curing of lightweight concrete blocks mixtures	257-267
Ipek, Metin / Yilmaz, Kemalettin / Uysal, Mucteba	The effect of pre-setting pressure applied flexural strength and fracture toughness of reactive powder concrete during the setting phase	459-465
Singh, Gurpreet / Siddique, Rafat	Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete	416-422
Bilir, Turhan	Effects of non-ground slag and bottom ash as fine aggregate on concrete permeability properties	730-734
Madhkhan, M. / Azizkhani, R. / Torki Harchegani, M. E.	Effects of pozzolans together with steel and polypropylene fibers on mechanical properties of RCC pavements	102-112
Galetakis, Michael / Alevizos, George / Leventakis, Konstantinos	Evaluation of fine limestone quarry by-products, for the production of building elements – An experimental approach	122-130
Haach, Vladimir G. / Vasconcelos, Graça / Lourenço, Paulo B.	Experimental analysis of reinforced concrete block masonry spandrels using pre-fabricated planar trussed bars	156-166
Hashemi, S. / Al-Mahaidi, R.	Experimental and finite element analysis of flexural behavior of FRP-strengthened RC beams using cement-based adhesives	268-273
He, Jun / Liu, Yuqing / Chen, Airong / Dai, Liang	Experimental investigation of movable hybrid GFRP and concrete bridge deck	49-64
Lin, Tsu-Jung / LaFave, James M.	Experimental structural behavior of wall-diaphragm connections for older masonry buildings	180-189
Dias-Da-Costa, D. / Alfaiate, J. / Júlio, E. N. B. S.	FE modeling of the interfacial behaviour of composite concrete members	233-243
Jung, M. S. / Shin, M. C. / Ann, K. Y.	Fingerprinting of a concrete mix proportion using the acid neutralisation capacity of concrete matrices	65-71
Kim, H. K. / Jeon, J. H. / Lee, H. K.	Flow, water absorption, and mechanical characteristics of normal- and high-strength mortar incorporating fine bottom ash aggregates	249-256
Samanci, Ahmet	Fracture behavior of woven steel fiber reinforced and sand particle filled polymer composites	167-171
Özcan, Fatih	Gene expression programming based formulations for splitting tensile strength of concrete	404-410
Kontogeorgos, D. / Ghazi Wakili, K. / Hugi, E. / Founti, M.	Heat and moisture transfer through a steel stud gypsum board assembly exposed to fire	746-754
Chen, W. / Brouwers, H. J. H.	Hydration of mineral shrinkage-compensating admixture for concrete: An experimental and numerical study	670-676
Yu, Huanan / Shen, Shihui	Impact of aggregate packing on dynamic modulus of hot mix asphalt mixtures using three-dimensional discrete element method	302-309
Chang, Chih-Yuan / Hung, San-Shan	Implementing RFIC and sensor technology to measure temperature and humidity inside concrete structures	628-637
Laukaitis, Antanas / Kerienė, Jadvyga / Kligys, Modestas / Mikulskis, Donatas / Lekūnaitė, Lina	Influence of mechanically treated carbon fibre additives on structure formation and properties of autoclaved aerated concrete	362-371
Grzeszczyk, Stefania / Janowska-Renkas, Elżbieta	The influence of small particle on the fluidity of blast furnace slag cement paste containing superplasticizers	411-415
Dehouche, Nadjet / Kaci, Mustapha / Mokhtar, Khadija Ait	Influence of thermo-oxidative aging on chemical composition and physical properties of polymer modified bitumens	350-356
Amer-Yahia, Cherif / Majidzadeh, Todd	Inspection of Insulated Concrete Form walls with Ground Penetrating Radar	448-458
Raab, Christiane / El Halim, A. O. Abd / Partl, Manfred N.	Interlayer bond testing using a model material	190-199
Nejad, Fereidoon Moghadas / Aghajani, Pedram / Modarres, Amir / Firoozifar, Hasan	Investigating the properties of crumb rubber modified bitumen using classic and SHRP testing methods	481-489
Wang, Hainian / You, Zhanping / Mills-Beale, Julian / Hao, Peiwen	Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber	583-590
Ameri, Mahmoud / Behnood, Ali	Laboratory studies to investigate the properties of CIR mixes containing steel slag as a substitute for virgin aggregates	475-480
Praticò, F. G. / Moro, A.	Measurement of air void content in hot mix asphalts: Method and core diameter dependence	344-349
Sajedi, Fathollah	Mechanical activation of cement–slag mortars	41-48
Haber, Zachary B. / Mackie, Kevin R. / Zhao, Lei	Mechanical and environmental loading of concrete beams strengthened with epoxy and polyurethane matrix carbon fiber laminates	604-612
Corinaldesi, Valeria / Moriconi, Giacomo	Mechanical and thermal evaluation of Ultra High Performance Fiber Reinforced Concretes for engineering applications	289-294
Moreno, F. / Rubio, M. C. / Martinez-Echevarria, M. J.	The mechanical performance of dry-process crumb rubber modified hot bituminous mixes: The influence of digestion time and crumb rubber percentage	466-474
Xiao, Jianzhuang / Huang, Yijie / Yang, Jie / Zhang, Ch.	Mechanical properties of confined recycled aggregate concrete under axial compression	591-603
Othuman Mydin, Md Azree / Wang, Y. C.	Mechanical properties of foamed concrete exposed to high temperatures	638-654
Dehwah, H. A. F.	Mechanical properties of self-compacting concrete incorporating quarry dust powder, silica fume or fly ash	547-551
Xu, Z. / Hao, H. / Li, H. N.	Mesoscale modelling of fibre reinforced concrete material under compressive impact loading	274-288
Nepomuceno, M. / Oliveira, L. / Lopes, S. M. R.	Methodology for mix design of the mortar phase of self-compacting concrete using different mineral additions in binary blends of powders	317-326
Millogo, Younoussa / Morel, Jean-Claude / Traoré, Karfa / Ouedraogo, Raguilnaba	Microstructure, geotechnical and mechanical characteristics of quicklime-lateritic gravels mixtures used in road construction	663-669
Xu, Chang / Xiangli, Cheng / Bin, Liu	Modeling of influence of heterogeneity on mechanical performance of unreinforced masonry shear walls	90-95
Lovato, Patricia S. / Possan, Edna / Dal Molin, Denise Carpena Coitinho / Masuero, Ângela B. / Ribeiro, José Luis D.	Modeling of mechanical properties and durability of recycled aggregate concretes	437-447
Aggelis, D. G. / Paipetis, A. S.	Monitoring of resin curing and hardening by ultrasound	755-760
Li, Long-yuan / Xia, Jin / Lin, San-Shyan	A multi-phase model for predicting the effective diffusion coefficient of chlorides in concrete	295-301
Esmaily, H. / Nuranian, H.	Non-autoclaved high strength cellular concrete from alkali activated slag	200-206
Promis, G. / Ferrier, E.	Performance indices to assess the efficiency of external FRP retrofitting of reinforced concrete short columns for seismic strengthening	32-40
Anochie-Boateng, Joseph / Maina, James	Permanent deformation testing for a new South African mechanistic pavement design method	541-546
Abd-El-Aziz, M. A. / Abd. El. Aleem, S. / Heikal, Mohamed	Physico-chemical and mechanical characteristics of pozzolanic cement pastes and mortars hydrated at different curing temperatures	310-316
Slater, Emma / Moni, Moniruzzaman / Shahria Alam, M.	Predicting the shear strength of steel fiber reinforced concrete beams	423-436
Colbert, Baron / You, Zhanping	The properties of asphalt binder blended with variable quantities of recycled asphalt using short term and long term aging simulations	552-557
De Matteis, Gianfranco / Brando, Giuseppe / Mazzolani, Federico M.	Pure aluminium: An innovative material for structural applications in seismic engineering	677-686
Qian, Chunxiang / Gao, Guibo	Reduction of interior temperature of mass concrete using suspension of phase change materials as cooling fluid	527-531
Makhloufi, Z. / Kadri, E. H. / Bouhicha, M. / Benaissa, A.	Resistance of limestone mortars with quaternary binders to sulfuric acid solution	497-504
Ahani, Reza Mohammadi / Nokken, Michelle R.	Salt scaling resistance – The effect of curing and pre-saturation	558-564
Uysal, Mucteba	Self-compacting concrete incorporating filler additives: Performance at high temperatures	701-706
Vydra, Vítězslav / Trtík, Karel / Vodák, František	Size independent fracture energy of concrete	357-361
Kilinc, Kadir / Çelik, Ahmet Ozan / Tuncan, Mustafa / Tuncan, Ahmet / Arslan, Gokhan / Arioz, Omer	Statistical distributions of in situ microcore concrete strength	393-403
Michels, Julien / Waldmann, Danièle / Maas, Stefan / Zürbes, Arno	Steel fibers as only reinforcement for flat slab construction – Experimental investigation and design	145-155
Xavier, J. / de Jesus, A. M. P. / Morais, J. J. L. / Pinto, J. M. T.	Stereovision measurements on evaluating the modulus of elasticity of wood by compression tests parallel to the grain	207-215
Carrasco, E. V. M. / Passos, L. B. / Mantilla, J. N. R.	Structural behavior evaluation of Brazilian glulam wood sleepers when submitted to static load	334-343
Al-Abdul Wahhab, Hamad I. / Baig, Mirza G. / Mahmoud, Isam A. / Kattan, Hisham M.	Study of road bases construction in Saudi Arabia using foam asphalt	113-121
Yu, Hui / Chiang, Kuang-Tsan K. / Yang, Lietai	Threshold chloride level and characteristics of reinforcement corrosion initiation in simulated concrete pore solutions	723-729
Cheng, Meng-Dawn / Miller, William / New, Joshua / Berdahl, Paul	Understanding the long-term effects of environmental exposure on roof reflectance in California	516-526
Wei, You-Yi / Wu, Yu-Fei	Unified stress–strain model of concrete for FRP-confined columns	381-392
Esteves, T. C. / Rajamma, R. / Soares, D. / Silva, A. S. / Ferreira, V. M. / Labrincha, J. A.	Use of biomass fly ash for mitigation of alkali-silica reaction of cement mortars	687-693
Wang, Jianyun / Van Tittelboom, Kim / De Belie, Nele / Verstraete, Willy	Use of silica gel or polyurethane immobilized bacteria for self-healing concrete	532-540

About this
data sheet
IssueID
22492
Published on:
16/12/2018
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - January 2012

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - January 2012

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.