Construction and Building Materials - janvier 2012

Publié:	janvier 2012

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
He, Fuqiang / Shi, Caijun / Yuan, Qiang / Chen, Changping / Zheng, Keren	AgNO3-based colorimetric methods for measurement of chloride penetration in concrete	1-8
Barfield, Mary / Ghafoori, Nader	Air-entrained self-consolidating concrete: A study of admixture sources	490-496
Maksimović, Mirjana / Stojanović, Goran M. / Radovanović, Milan / Malešev, Mirjana / Radonjanin, Vlastimir / Radosavljević, Goran / Smetana, Walter	Application of a LTCC sensor for measuring moisture content of building materials	327-333
Pérez-Jiménez, Félix / Valdés, Gonzalo A. / Botella, Ramón / Miró, Rodrigo / Martínez, Adriana	Approach to fatigue performance using Fénix test for asphalt mixtures	372-380
Tam, C. M. / Tam, Vivian W. Y. / Ng, K. M.	Assessing drying shrinkage and water permeability of reactive powder concrete produced in Hong Kong	79-89
Pelletier-Chaignat, Laure / Winnefeld, Frank / Lothenbach, Barbara / Müller, Christian Jörg	Beneficial use of limestone filler with calcium sulphoaluminate cement	619-627
Rahmanian, I. / Wang, Y. C.	A combined experimental and numerical method for extracting temperature-dependent thermal conductivity of gypsum boards	707-722
Bozorg-Haddad, Amir / Iskander, Magued / Chen, Yufan	Compressive strength and creep of recycled HDPE used to manufacture polymeric piling	505-515
Higashiyama, Hiroshi / Yagishita, Fumio / Sano, Masanori / Takahashi, Osamu	Compressive strength and resistance to chloride penetration of mortars using ceramic waste as fine aggregate	96-101
İnan Sezer, Gözde	Compressive strength and sulfate resistance of limestone and/or silica fume mortars	613-618
Veludo, J. / Júlio, E. N. B. S. / Dias-Da-Costa, D.	Compressive strength of micropile-to-grout connections	172-179
Zhang, Dawei / Ueda, Tamon / Furuuchi, Hitoshi	Concrete cover separation failure of overlay-strengthened reinforced concrete beams	735-745
Colbert, Baron / You, Zhanping	The determination of mechanical performance of laboratory produced hot mix asphalt mixtures using controlled RAP and virgin aggregate size fractions	655-662
Kim, Hyunwook / Partl, Manfred N.	Development of a double-torsion fracture test to predict channelized crack behaviors of asphalt concrete	694-700
Ajagbe, Wasiu O. / Omokehinde, Olusola S. / Alade, Gabriel A. / Agbede, Oluwole A.	Effect of Crude Oil Impacted Sand on compressive strength of concrete	9-12
Zhang, Henglong / Yu, Jianying / Kuang, Dongliang	Effect of expanded vermiculite on aging properties of bitumen	244-248
Shi, Caijun / He, Fuqiang / Wu, Yanzhong	Effect of pre-conditioning on CO2 curing of lightweight concrete blocks mixtures	257-267
Ipek, Metin / Yilmaz, Kemalettin / Uysal, Mucteba	The effect of pre-setting pressure applied flexural strength and fracture toughness of reactive powder concrete during the setting phase	459-465
Singh, Gurpreet / Siddique, Rafat	Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete	416-422
Bilir, Turhan	Effects of non-ground slag and bottom ash as fine aggregate on concrete permeability properties	730-734
Madhkhan, M. / Azizkhani, R. / Torki Harchegani, M. E.	Effects of pozzolans together with steel and polypropylene fibers on mechanical properties of RCC pavements	102-112
Galetakis, Michael / Alevizos, George / Leventakis, Konstantinos	Evaluation of fine limestone quarry by-products, for the production of building elements – An experimental approach	122-130
Haach, Vladimir G. / Vasconcelos, Graça / Lourenço, Paulo B.	Experimental analysis of reinforced concrete block masonry spandrels using pre-fabricated planar trussed bars	156-166
Hashemi, S. / Al-Mahaidi, R.	Experimental and finite element analysis of flexural behavior of FRP-strengthened RC beams using cement-based adhesives	268-273
He, Jun / Liu, Yuqing / Chen, Airong / Dai, Liang	Experimental investigation of movable hybrid GFRP and concrete bridge deck	49-64
Lin, Tsu-Jung / LaFave, James M.	Experimental structural behavior of wall-diaphragm connections for older masonry buildings	180-189
Dias-Da-Costa, D. / Alfaiate, J. / Júlio, E. N. B. S.	FE modeling of the interfacial behaviour of composite concrete members	233-243
Jung, M. S. / Shin, M. C. / Ann, K. Y.	Fingerprinting of a concrete mix proportion using the acid neutralisation capacity of concrete matrices	65-71
Kim, H. K. / Jeon, J. H. / Lee, H. K.	Flow, water absorption, and mechanical characteristics of normal- and high-strength mortar incorporating fine bottom ash aggregates	249-256
Samanci, Ahmet	Fracture behavior of woven steel fiber reinforced and sand particle filled polymer composites	167-171
Özcan, Fatih	Gene expression programming based formulations for splitting tensile strength of concrete	404-410
Kontogeorgos, D. / Ghazi Wakili, K. / Hugi, E. / Founti, M.	Heat and moisture transfer through a steel stud gypsum board assembly exposed to fire	746-754
Chen, W. / Brouwers, H. J. H.	Hydration of mineral shrinkage-compensating admixture for concrete: An experimental and numerical study	670-676
Yu, Huanan / Shen, Shihui	Impact of aggregate packing on dynamic modulus of hot mix asphalt mixtures using three-dimensional discrete element method	302-309
Chang, Chih-Yuan / Hung, San-Shan	Implementing RFIC and sensor technology to measure temperature and humidity inside concrete structures	628-637
Laukaitis, Antanas / Kerienė, Jadvyga / Kligys, Modestas / Mikulskis, Donatas / Lekūnaitė, Lina	Influence of mechanically treated carbon fibre additives on structure formation and properties of autoclaved aerated concrete	362-371
Grzeszczyk, Stefania / Janowska-Renkas, Elżbieta	The influence of small particle on the fluidity of blast furnace slag cement paste containing superplasticizers	411-415
Dehouche, Nadjet / Kaci, Mustapha / Mokhtar, Khadija Ait	Influence of thermo-oxidative aging on chemical composition and physical properties of polymer modified bitumens	350-356
Amer-Yahia, Cherif / Majidzadeh, Todd	Inspection of Insulated Concrete Form walls with Ground Penetrating Radar	448-458
Raab, Christiane / El Halim, A. O. Abd / Partl, Manfred N.	Interlayer bond testing using a model material	190-199
Nejad, Fereidoon Moghadas / Aghajani, Pedram / Modarres, Amir / Firoozifar, Hasan	Investigating the properties of crumb rubber modified bitumen using classic and SHRP testing methods	481-489
Wang, Hainian / You, Zhanping / Mills-Beale, Julian / Hao, Peiwen	Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber	583-590
Ameri, Mahmoud / Behnood, Ali	Laboratory studies to investigate the properties of CIR mixes containing steel slag as a substitute for virgin aggregates	475-480
Praticò, F. G. / Moro, A.	Measurement of air void content in hot mix asphalts: Method and core diameter dependence	344-349
Sajedi, Fathollah	Mechanical activation of cement–slag mortars	41-48
Haber, Zachary B. / Mackie, Kevin R. / Zhao, Lei	Mechanical and environmental loading of concrete beams strengthened with epoxy and polyurethane matrix carbon fiber laminates	604-612
Corinaldesi, Valeria / Moriconi, Giacomo	Mechanical and thermal evaluation of Ultra High Performance Fiber Reinforced Concretes for engineering applications	289-294
Moreno, F. / Rubio, M. C. / Martinez-Echevarria, M. J.	The mechanical performance of dry-process crumb rubber modified hot bituminous mixes: The influence of digestion time and crumb rubber percentage	466-474
Xiao, Jianzhuang / Huang, Yijie / Yang, Jie / Zhang, Ch.	Mechanical properties of confined recycled aggregate concrete under axial compression	591-603
Othuman Mydin, Md Azree / Wang, Y. C.	Mechanical properties of foamed concrete exposed to high temperatures	638-654
Dehwah, H. A. F.	Mechanical properties of self-compacting concrete incorporating quarry dust powder, silica fume or fly ash	547-551
Xu, Z. / Hao, H. / Li, H. N.	Mesoscale modelling of fibre reinforced concrete material under compressive impact loading	274-288
Nepomuceno, M. / Oliveira, L. / Lopes, S. M. R.	Methodology for mix design of the mortar phase of self-compacting concrete using different mineral additions in binary blends of powders	317-326
Millogo, Younoussa / Morel, Jean-Claude / Traoré, Karfa / Ouedraogo, Raguilnaba	Microstructure, geotechnical and mechanical characteristics of quicklime-lateritic gravels mixtures used in road construction	663-669
Xu, Chang / Xiangli, Cheng / Bin, Liu	Modeling of influence of heterogeneity on mechanical performance of unreinforced masonry shear walls	90-95
Lovato, Patricia S. / Possan, Edna / Dal Molin, Denise Carpena Coitinho / Masuero, Ângela B. / Ribeiro, José Luis D.	Modeling of mechanical properties and durability of recycled aggregate concretes	437-447
Aggelis, D. G. / Paipetis, A. S.	Monitoring of resin curing and hardening by ultrasound	755-760
Li, Long-yuan / Xia, Jin / Lin, San-Shyan	A multi-phase model for predicting the effective diffusion coefficient of chlorides in concrete	295-301
Esmaily, H. / Nuranian, H.	Non-autoclaved high strength cellular concrete from alkali activated slag	200-206
Promis, G. / Ferrier, E.	Performance indices to assess the efficiency of external FRP retrofitting of reinforced concrete short columns for seismic strengthening	32-40
Anochie-Boateng, Joseph / Maina, James	Permanent deformation testing for a new South African mechanistic pavement design method	541-546
Abd-El-Aziz, M. A. / Abd. El. Aleem, S. / Heikal, Mohamed	Physico-chemical and mechanical characteristics of pozzolanic cement pastes and mortars hydrated at different curing temperatures	310-316
Slater, Emma / Moni, Moniruzzaman / Shahria Alam, M.	Predicting the shear strength of steel fiber reinforced concrete beams	423-436
Colbert, Baron / You, Zhanping	The properties of asphalt binder blended with variable quantities of recycled asphalt using short term and long term aging simulations	552-557
De Matteis, Gianfranco / Brando, Giuseppe / Mazzolani, Federico M.	Pure aluminium: An innovative material for structural applications in seismic engineering	677-686
Qian, Chunxiang / Gao, Guibo	Reduction of interior temperature of mass concrete using suspension of phase change materials as cooling fluid	527-531
Makhloufi, Z. / Kadri, E. H. / Bouhicha, M. / Benaissa, A.	Resistance of limestone mortars with quaternary binders to sulfuric acid solution	497-504
Ahani, Reza Mohammadi / Nokken, Michelle R.	Salt scaling resistance – The effect of curing and pre-saturation	558-564
Uysal, Mucteba	Self-compacting concrete incorporating filler additives: Performance at high temperatures	701-706
Vydra, Vítězslav / Trtík, Karel / Vodák, František	Size independent fracture energy of concrete	357-361
Kilinc, Kadir / Çelik, Ahmet Ozan / Tuncan, Mustafa / Tuncan, Ahmet / Arslan, Gokhan / Arioz, Omer	Statistical distributions of in situ microcore concrete strength	393-403
Michels, Julien / Waldmann, Danièle / Maas, Stefan / Zürbes, Arno	Steel fibers as only reinforcement for flat slab construction – Experimental investigation and design	145-155
Xavier, J. / de Jesus, A. M. P. / Morais, J. J. L. / Pinto, J. M. T.	Stereovision measurements on evaluating the modulus of elasticity of wood by compression tests parallel to the grain	207-215
Carrasco, E. V. M. / Passos, L. B. / Mantilla, J. N. R.	Structural behavior evaluation of Brazilian glulam wood sleepers when submitted to static load	334-343
Al-Abdul Wahhab, Hamad I. / Baig, Mirza G. / Mahmoud, Isam A. / Kattan, Hisham M.	Study of road bases construction in Saudi Arabia using foam asphalt	113-121
Yu, Hui / Chiang, Kuang-Tsan K. / Yang, Lietai	Threshold chloride level and characteristics of reinforcement corrosion initiation in simulated concrete pore solutions	723-729
Cheng, Meng-Dawn / Miller, William / New, Joshua / Berdahl, Paul	Understanding the long-term effects of environmental exposure on roof reflectance in California	516-526
Wei, You-Yi / Wu, Yu-Fei	Unified stress–strain model of concrete for FRP-confined columns	381-392
Esteves, T. C. / Rajamma, R. / Soares, D. / Silva, A. S. / Ferreira, V. M. / Labrincha, J. A.	Use of biomass fly ash for mitigation of alkali-silica reaction of cement mortars	687-693
Wang, Jianyun / Van Tittelboom, Kim / De Belie, Nele / Verstraete, Willy	Use of silica gel or polyurethane immobilized bacteria for self-healing concrete	532-540

Informations
sur cette fiche
IssueID
22492
Publié(e) le:
16.12.2018
Modifié(e) le:
26.07.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - janvier 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - janvier 2012

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.