Construction and Building Materials - v. 25, n. 8 (August 2011)

Published:	August 2011

Articles in this Issue

Author(s)	Title	Page(s)
Ramos García, J. Antonio / Castro, María	Analysis of the temperature influence on flexible pavement deflection	3530-3539
Mohammed, Bashar S. / Al-Ganad, Mohammed A. / Abdullahi, M.	Analytical and experimental studies on composite slabs utilising palm oil clinker concrete	3550-3560
Ahmed, Abdelkader T.	Approximated calculation model for plastic deformations of granular waste materials	3610-3616
Silva, Manuel A. G.	Behavior of square and circular columns strengthened with aramidic or carbon fibers	3222-3228
Abdelaal, Magdy Y. / Sobahi, Tariq R. / Makki, Mohamad Saleh I.	Chemical transformation of pet waste through glycolysis	3267-3271
Gencel, Osman / Kocabaş, Fikret / Gok, Mustafa Sabri / Köksal, Fuat	Comparison of artificial neural networks and general linear model approaches for the analysis of abrasive wear of concrete	3486-3494
Putman, Bradley J. / Neptune, Andrew I.	Comparison of test specimen preparation techniques for pervious concrete pavements	3480-3485
Itim, Ahmed / Ezziane, Karim / Kadri, El-Hadj	Compressive strength and shrinkage of mortar containing various amounts of mineral additions	3603-3609
Vasconcelos, E. / Fernandes, S. / Barroso de Aguiar, J. L. / Pacheco-Torgal, F.	Concrete retrofitting using metakaolin geopolymer mortars and CFRP	3213-3221
Papadopoulos, M. P. / Apostolopoulos, C. A. / Zervaki, A. D. / Haidemenopoulos, G. N.	Corrosion of exposed rebars, associated mechanical degradation and correlation with accelerated corrosion tests	3367-3374
Malaiškienė, Jurgita / Mačiulaitis, Romualdas / Kicaite, Asta	Dependence of ceramics physical–mechanical properties on chemical and mineralogical composition	3168-3174
Sasmal, Saptarshi / Lakshmanan, N. / Ramanjaneyulu, K. / Iyer, Nagesh R. / Novák, Balthasar / Srinivas, V. / Saravana Kumar, K. / Roehm, Constanze	Development of upgradation schemes for gravity load designed beam–column sub-assemblage under cyclic loading	3625-3638
Grandão Lopes, Jorge / Correia, João R. / Machado, Miguel X. B.	Dimensional stability of waterproofing bituminous sheets used in low slope roofs	3229-3235
Huang, Hai / Tutumluer, Erol	Discrete Element Modeling for fouled railroad ballast	3306-3312
Rostami, Vahid / Shao, Yixin / Boyd, Andrew J.	Durability of concrete pipes subjected to combined steam and carbonation curing	3345-3355
Manso, Juan M. / Rodriguez, Ángel / Aragón, Ángel / Gonzalez, Javier J.	The durability of masonry mortars made with ladle furnace slag	3508-3519
Siddique, Rafat / Kadri, El-Hadj	Effect of metakaolin and foundry sand on the near surface characteristics of concrete	3257-3266
Barbhuiya, Salim	Effects of fly ash and dolomite powder on the properties of self-compacting concrete	3301-3305
Liu, Rui / Durham, Stephan A. / Rens, Kevin L.	Effects of post-mercury-control fly ash on fresh and hardened concrete properties	3283-3290
Shokrieh, M. M. / Heidari-Rarani, M. / Shakouri, M. / Kashizadeh, E.	Effects of thermal cycles on mechanical properties of an optimized polymer concrete	3540-3549
Valipour, Hamid R. / Crews, Keith	Efficient finite element modelling of timber beams strengthened with bonded fibre reinforced polymers	3291-3300
Panesar, D. K. / Shindman, B.	Elastic properties of self consolidating concrete	3334-3344
Vilanova, Angel / Fernández-Gómez, Jaime / Agranati Landsberger, Galit	Evaluation of the mechanical properties of self compacting concrete using current estimating models	3417-3426
Al-Rousan, R. / Issa, M.	Fatigue performance of reinforced concrete beams strengthened with CFRP sheets	3520-3529
Kanyeto, O. J. / Fried, A.	Flexural behaviour of thin joint concrete blockwork: Experimental results	3639-3647
Senff, L. / Castela, A. / Hajjaji, W. / Hotza, D. / Labrincha, J. A.	Formulations of sulfobelite cement through design of experiments	3410-3416
Adamopoulou, E. / Pipilikaki, P. / Katsiotis, M. S. / Chaniotakis, M. / Katsioti, M.	How sulfates and increased temperature affect delayed ettringite formation (DEF) in white cement mortars	3583-3590
Barbosa, F. S. / Beaucour, A.-L. / Farage, M. C. R. / Ortola, S.	Image processing applied to the analysis of segregation in lightweight aggregate concretes	3375-3381
Tang, S. B. / Tang, C. A. / Liang, Z. Z. / Zhang, Y. F.	Influence of heterogeneity on strength and failure characterization of cement-based composite subjected to uniform thermal loading	3382-3392
Merusi, Filippo / Giuliani, Felice	Intrinsic resistance to non-reversible deformation in modified asphalt binders and its relation with specification criteria	3356-3366
Karakuş, Askeri	Investigating on possible use of Diyarbakir basalt waste in Stone Mastic Asphalt	3502-3507
Kök, Baha Vural / Çolak, Hakan	Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt	3204-3212
Kovler, Konstantin	Legislative aspects of radiation hazards from both gamma emitters and radon exhalation of concrete containing coal fly ash	3404-3409
Seim, Werner / Pfeiffer, Uwe	Local post-strengthening of masonry structures with fiber-reinforced polymers (FRPs)	3393-3403
González-Corrochano, B. / Alonso-Azcárate, J. / Rodas, M. / Barrenechea, J. F. / Luque, F. J.	Microstructure and mineralogy of lightweight aggregates manufactured from mining and industrial wastes	3591-3602
Akbarnezhad, A. / Ong, K. C. G. / Zhang, M. H. / Tam, C. T. / Foo, T. W. J.	Microwave-assisted beneficiation of recycled concrete aggregates	3469-3479
Oh, Jeong Ho / Chen, D. H. / Walubita, L. F. / Wimsatt, A. J.	Mitigating seal coat damage due to superheavy load moves in Texas low volume roads	3236-3244
Pasetto, Marco / Baldo, Nicola	Mix design and performance analysis of asphalt concretes with electric arc furnace slag	3458-3468
Serhat Baspinar, M. / Kahraman, Erhan	Modifications in the properties of gypsum construction element via addition of expanded macroporous silica granules	3327-3333
Shu, Xiang / Huang, Baoshan / Wu, Hao / Dong, Qiao / Burdette, Edwin G.	Performance comparison of laboratory and field produced pervious concrete mixtures	3187-3192
Gesoǧlu, Mehmet / Güneyisi, Erhan	Permeability properties of self-compacting rubberized concretes	3319-3326
Chindaprasirt, P. / Boonserm, K. / Chairuangsri, T. / Vichit-Vadakan, W. / Eaimsin, T. / Sato, T. / Pimraksa, K.	Plaster materials from waste calcium sulfate containing chemicals, organic fibers and inorganic additives	3193-3203
Yuan, Yingshu / Jiang, Jianhua	Prediction of temperature response in concrete in a natural climate environment	3159-3167
Bilim, Cahit	Properties of cement mortars containing clinoptilolite as a supplementary cementitious material	3175-3180
Ling, I. H. / Teo, D. C. L.	Properties of EPS RHA lightweight concrete bricks under different curing conditions	3648-3655
Gualtieri, A. F. / Boccaletti, M.	Recycling of the product of thermal inertization of cement–asbestos for the production of concrete	3561-3569
Custódio, João / Broughton, James / Cruz, Helena	Rehabilitation of timber structures – Preparation and environmental service condition effects on the bulk performance of epoxy adhesives	3570-3582
Corinaldesi, V. / Moriconi, G.	The role of industrial by-products in self-compacting concrete	3181-3186
Yang, Kuo-Chen / Hsu, Re-Jia / Chen, Yan-Jun	Shear strength of high-strength bolts at elevated temperature	3656-3660
Giner, V. T. / Ivorra, S. / Baeza, F. J. / Zornoza, E. / Ferrer, B.	Silica fume admixture effect on the dynamic properties of concrete	3272-3277
Lindorf, Alexander / Curbach, Manfred	Slip behaviour at cyclic pullout tests under transverse tension	3617-3624
Hossain, K. M. A. / Mol, L.	Some engineering properties of stabilized clayey soils incorporating natural pozzolans and industrial wastes	3495-3501
Hashem, F. S. / Amin, M. S. / Hekal, Eisa E.	Stabilization of Cu (II) wastes by C3S hydrated matrix	3278-3282
Shi, Xianming / Yang, Zhengxian / Liu, Yajun / Cross, Doug	Strength and corrosion properties of Portland cement mortar and concrete with mineral admixtures	3245-3256
Mamun, Muhammad / Bindiganavile, Vivek	Sulphate resistance of fibre reinforced cement-based foams	3427-3442
Laskar, Aminul Islam / Bhattacharjee, Rajan	Torque–speed relationship in a concrete rheometer with vane geometry	3443-3449
Ventolà, L. / Vendrell, M. / Giraldez, P. / Merino, L.	Traditional organic additives improve lime mortars: New old materials for restoration and building natural stone fabrics	3313-3318
Atahan, H. N. / Dikme, D.	Use of mineral admixtures for enhanced resistance against sulfate attack	3450-3457

About this
data sheet
IssueID
22470
Published on:
13/12/2018
Last updated on:
13/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 25, n. 8 (August 2011)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 25, n. 8 (August 2011)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.