Construction and Building Materials - v. 25, n. 8 (août 2011)

Publié:	août 2011

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ramos García, J. Antonio / Castro, María	Analysis of the temperature influence on flexible pavement deflection	3530-3539
Mohammed, Bashar S. / Al-Ganad, Mohammed A. / Abdullahi, M.	Analytical and experimental studies on composite slabs utilising palm oil clinker concrete	3550-3560
Ahmed, Abdelkader T.	Approximated calculation model for plastic deformations of granular waste materials	3610-3616
Silva, Manuel A. G.	Behavior of square and circular columns strengthened with aramidic or carbon fibers	3222-3228
Abdelaal, Magdy Y. / Sobahi, Tariq R. / Makki, Mohamad Saleh I.	Chemical transformation of pet waste through glycolysis	3267-3271
Gencel, Osman / Kocabaş, Fikret / Gok, Mustafa Sabri / Köksal, Fuat	Comparison of artificial neural networks and general linear model approaches for the analysis of abrasive wear of concrete	3486-3494
Putman, Bradley J. / Neptune, Andrew I.	Comparison of test specimen preparation techniques for pervious concrete pavements	3480-3485
Itim, Ahmed / Ezziane, Karim / Kadri, El-Hadj	Compressive strength and shrinkage of mortar containing various amounts of mineral additions	3603-3609
Vasconcelos, E. / Fernandes, S. / Barroso de Aguiar, J. L. / Pacheco-Torgal, F.	Concrete retrofitting using metakaolin geopolymer mortars and CFRP	3213-3221
Papadopoulos, M. P. / Apostolopoulos, C. A. / Zervaki, A. D. / Haidemenopoulos, G. N.	Corrosion of exposed rebars, associated mechanical degradation and correlation with accelerated corrosion tests	3367-3374
Malaiškienė, Jurgita / Mačiulaitis, Romualdas / Kicaite, Asta	Dependence of ceramics physical–mechanical properties on chemical and mineralogical composition	3168-3174
Sasmal, Saptarshi / Lakshmanan, N. / Ramanjaneyulu, K. / Iyer, Nagesh R. / Novák, Balthasar / Srinivas, V. / Saravana Kumar, K. / Roehm, Constanze	Development of upgradation schemes for gravity load designed beam–column sub-assemblage under cyclic loading	3625-3638
Grandão Lopes, Jorge / Correia, João R. / Machado, Miguel X. B.	Dimensional stability of waterproofing bituminous sheets used in low slope roofs	3229-3235
Huang, Hai / Tutumluer, Erol	Discrete Element Modeling for fouled railroad ballast	3306-3312
Rostami, Vahid / Shao, Yixin / Boyd, Andrew J.	Durability of concrete pipes subjected to combined steam and carbonation curing	3345-3355
Manso, Juan M. / Rodriguez, Ángel / Aragón, Ángel / Gonzalez, Javier J.	The durability of masonry mortars made with ladle furnace slag	3508-3519
Siddique, Rafat / Kadri, El-Hadj	Effect of metakaolin and foundry sand on the near surface characteristics of concrete	3257-3266
Barbhuiya, Salim	Effects of fly ash and dolomite powder on the properties of self-compacting concrete	3301-3305
Liu, Rui / Durham, Stephan A. / Rens, Kevin L.	Effects of post-mercury-control fly ash on fresh and hardened concrete properties	3283-3290
Shokrieh, M. M. / Heidari-Rarani, M. / Shakouri, M. / Kashizadeh, E.	Effects of thermal cycles on mechanical properties of an optimized polymer concrete	3540-3549
Valipour, Hamid R. / Crews, Keith	Efficient finite element modelling of timber beams strengthened with bonded fibre reinforced polymers	3291-3300
Panesar, D. K. / Shindman, B.	Elastic properties of self consolidating concrete	3334-3344
Vilanova, Angel / Fernández-Gómez, Jaime / Agranati Landsberger, Galit	Evaluation of the mechanical properties of self compacting concrete using current estimating models	3417-3426
Al-Rousan, R. / Issa, M.	Fatigue performance of reinforced concrete beams strengthened with CFRP sheets	3520-3529
Kanyeto, O. J. / Fried, A.	Flexural behaviour of thin joint concrete blockwork: Experimental results	3639-3647
Senff, L. / Castela, A. / Hajjaji, W. / Hotza, D. / Labrincha, J. A.	Formulations of sulfobelite cement through design of experiments	3410-3416
Adamopoulou, E. / Pipilikaki, P. / Katsiotis, M. S. / Chaniotakis, M. / Katsioti, M.	How sulfates and increased temperature affect delayed ettringite formation (DEF) in white cement mortars	3583-3590
Barbosa, F. S. / Beaucour, A.-L. / Farage, M. C. R. / Ortola, S.	Image processing applied to the analysis of segregation in lightweight aggregate concretes	3375-3381
Tang, S. B. / Tang, C. A. / Liang, Z. Z. / Zhang, Y. F.	Influence of heterogeneity on strength and failure characterization of cement-based composite subjected to uniform thermal loading	3382-3392
Merusi, Filippo / Giuliani, Felice	Intrinsic resistance to non-reversible deformation in modified asphalt binders and its relation with specification criteria	3356-3366
Karakuş, Askeri	Investigating on possible use of Diyarbakir basalt waste in Stone Mastic Asphalt	3502-3507
Kök, Baha Vural / Çolak, Hakan	Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt	3204-3212
Kovler, Konstantin	Legislative aspects of radiation hazards from both gamma emitters and radon exhalation of concrete containing coal fly ash	3404-3409
Seim, Werner / Pfeiffer, Uwe	Local post-strengthening of masonry structures with fiber-reinforced polymers (FRPs)	3393-3403
González-Corrochano, B. / Alonso-Azcárate, J. / Rodas, M. / Barrenechea, J. F. / Luque, F. J.	Microstructure and mineralogy of lightweight aggregates manufactured from mining and industrial wastes	3591-3602
Akbarnezhad, A. / Ong, K. C. G. / Zhang, M. H. / Tam, C. T. / Foo, T. W. J.	Microwave-assisted beneficiation of recycled concrete aggregates	3469-3479
Oh, Jeong Ho / Chen, D. H. / Walubita, L. F. / Wimsatt, A. J.	Mitigating seal coat damage due to superheavy load moves in Texas low volume roads	3236-3244
Pasetto, Marco / Baldo, Nicola	Mix design and performance analysis of asphalt concretes with electric arc furnace slag	3458-3468
Serhat Baspinar, M. / Kahraman, Erhan	Modifications in the properties of gypsum construction element via addition of expanded macroporous silica granules	3327-3333
Shu, Xiang / Huang, Baoshan / Wu, Hao / Dong, Qiao / Burdette, Edwin G.	Performance comparison of laboratory and field produced pervious concrete mixtures	3187-3192
Gesoǧlu, Mehmet / Güneyisi, Erhan	Permeability properties of self-compacting rubberized concretes	3319-3326
Chindaprasirt, P. / Boonserm, K. / Chairuangsri, T. / Vichit-Vadakan, W. / Eaimsin, T. / Sato, T. / Pimraksa, K.	Plaster materials from waste calcium sulfate containing chemicals, organic fibers and inorganic additives	3193-3203
Yuan, Yingshu / Jiang, Jianhua	Prediction of temperature response in concrete in a natural climate environment	3159-3167
Bilim, Cahit	Properties of cement mortars containing clinoptilolite as a supplementary cementitious material	3175-3180
Ling, I. H. / Teo, D. C. L.	Properties of EPS RHA lightweight concrete bricks under different curing conditions	3648-3655
Gualtieri, A. F. / Boccaletti, M.	Recycling of the product of thermal inertization of cement–asbestos for the production of concrete	3561-3569
Custódio, João / Broughton, James / Cruz, Helena	Rehabilitation of timber structures – Preparation and environmental service condition effects on the bulk performance of epoxy adhesives	3570-3582
Corinaldesi, V. / Moriconi, G.	The role of industrial by-products in self-compacting concrete	3181-3186
Yang, Kuo-Chen / Hsu, Re-Jia / Chen, Yan-Jun	Shear strength of high-strength bolts at elevated temperature	3656-3660
Giner, V. T. / Ivorra, S. / Baeza, F. J. / Zornoza, E. / Ferrer, B.	Silica fume admixture effect on the dynamic properties of concrete	3272-3277
Lindorf, Alexander / Curbach, Manfred	Slip behaviour at cyclic pullout tests under transverse tension	3617-3624
Hossain, K. M. A. / Mol, L.	Some engineering properties of stabilized clayey soils incorporating natural pozzolans and industrial wastes	3495-3501
Hashem, F. S. / Amin, M. S. / Hekal, Eisa E.	Stabilization of Cu (II) wastes by C3S hydrated matrix	3278-3282
Shi, Xianming / Yang, Zhengxian / Liu, Yajun / Cross, Doug	Strength and corrosion properties of Portland cement mortar and concrete with mineral admixtures	3245-3256
Mamun, Muhammad / Bindiganavile, Vivek	Sulphate resistance of fibre reinforced cement-based foams	3427-3442
Laskar, Aminul Islam / Bhattacharjee, Rajan	Torque–speed relationship in a concrete rheometer with vane geometry	3443-3449
Ventolà, L. / Vendrell, M. / Giraldez, P. / Merino, L.	Traditional organic additives improve lime mortars: New old materials for restoration and building natural stone fabrics	3313-3318
Atahan, H. N. / Dikme, D.	Use of mineral admixtures for enhanced resistance against sulfate attack	3450-3457

Informations
sur cette fiche
IssueID
22470
Publié(e) le:
13.12.2018
Modifié(e) le:
13.12.2018

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - v. 25, n. 8 (août 2011)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - v. 25, n. 8 (août 2011)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.