Construction and Building Materials - v. 25, n. 5 (May 2011)

Published:	May 2011

Articles in this Issue

Author(s)	Title	Page(s)
Moreno, F. / Rubio, M. C. / Martinez-Echevarria, M. J.	Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixes	2323-2334
Kang, Bong-Gu / Hannawald, Joachim / Brameshuber, Wolfgang	Ar-glass filament material law for arbitrary quasi-static long-term loading	2228-2239
Barrios Padura, A. / Barrios Sevilla, J. / García Navarro, J.	Bearing capacity diagnosis of Santiago church (Jerez de la Frontera, Spain)	2519-2527
Yeboah, David / Taylor, Su / McPolin, Danny / Gilfillan, Raymond / Gilbert, Stephen	Behaviour of joints with bonded-in steel bars loaded parallel to the grain of timber elements	2312-2317
Garzón-Roca, Julio / Adam, José M. / Calderón, Pedro A.	Behaviour of RC columns strengthened by steel caging under combined bending and axial loads	2402-2412
Rodrigues, M. Fernanda S. / Teixeira, José M. C. / Cardoso, José C. P.	Buildings envelope anomalies: A visual survey methodology	2741-2750
Talero, R. / Trusilewicz, L. / Delgado, A. / Pedrajas, C. / Lannegrand, R. / Rahhal, V. / Mejía, R. / Delvasto, S. / Ramírez, F. A.	Comparative and semi-quantitative XRD analysis of Friedel's salt originating from pozzolan and Portland cement	2370-2380
Howson, Jonathan / Masad, Eyad / Bhasin, Amit / Little, Dallas / Lytton, Robert	Comprehensive analysis of surface free energy of asphalts and aggregates and the effects of changes in pH	2554-2564
Piekarczyk, J. / Piekarczyk, W. / Blazewicz, S.	Compression strength of concrete cylinders reinforced with carbon fiber laminate	2365-2369
Senthamarai, RM. / Devadas Manoharan, P. / Gobinath, D.	Concrete made from ceramic industry waste: Durability properties	2413-2419
Yahyaei-Moayyed, M. / Taheri, F.	Creep response of glued-laminated beam reinforced with pre-stressed sub-laminated composite	2495-2506
Li, Wenting / Sun, Wei / Jiang, Jinyang	Damage of concrete experiencing flexural fatigue load and closed freeze/thaw cycles simultaneously	2604-2610
Wang, Huanzi / Belarbi, Abdeldjelil	Ductility characteristics of fiber-reinforced-concrete beams reinforced with FRP rebars	2391-2401
Ayhan, Mustafa / Gönül, Hatice / Gönül, İsmail Ağa / Karakuş, Askeri	Effect of basic pumice on morphologic properties of interfacial transition zone in load-bearing lightweight/semi-lightweight concretes	2507-2518
Kang, Su Tae / Lee, Bang Yeon / Kim, Jin-Keun / Kim, Yun Yong	The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete	2450-2457
Zhang, Wu-man / Ba, Heng-jing / Chen, Shang-jiang	Effect of fly ash and repeated loading on diffusion coefficient in chloride migration test	2269-2274
Tapan, M. / Aboutaha, R. S.	Effect of steel corrosion and loss of concrete cover on strength of deteriorated RC columns	2596-2603
Hopkin, D. J. / El-Rimawi, J. / Silberschmidt, V. / Lennon, T.	An effective thermal property framework for softwood in parametric design fires: Comparison of the Eurocode 5 parametric charring approach and advanced calculation models	2584-2595
Lee, Gerry / Ling, Tung-Chai / Wong, Yuk-Lung / Poon, Chi-Sun	Effects of crushed glass cullet sizes, casting methods and pozzolanic materials on ASR of concrete blocks	2611-2618
Yi, Seong-Tae / Hyun, Tae-Yang / Kim, Jin-Keun	The effects of hydraulic pressure and crack width on water permeability of penetration crack-induced concrete	2576-2583
Tanarslan, H. M.	The effects of NSM CFRP reinforcements for improving the shear capacity of RC beams	2663-2673
Muhammad, Bala / Ismail, Mohammad / Yussuf, A. A. / Muhammad, A. R. B.	Elastomeric influence of natural rubber latex on cement mortar at high temperatures using thermal degradation analysis	2223-2227
Jing, Xu / Wu, Yao	Electrochemical studies on the performance of conductive overlay material in cathodic protection of reinforced concrete	2655-2662
Cromwell, J. R. / Harries, K. A. / Shahrooz, B. M.	Environmental durability of externally bonded FRP materials intended for repair of concrete structures	2528-2539
Walubita, Lubinda F. / Alvarez, Allex E. / Simate, Geoffrey S.	Evaluating and comparing different methods and models for generating relaxation modulus master-curves for asphalt mixes	2619-2626
Sanchez-Alonso, Elsa / Vega-Zamanillo, Angel / Castro-Fresno, Daniel / DelRio-Prat, Maria	Evaluation of compactability and mechanical properties of bituminous mixes with warm additives	2304-2311
Pinna, Daniela / Salvadori, Barbara / Porcinai, Simone	Evaluation of the application conditions of artificial protection treatments on salt-laden limestones and marble	2723-2732
Huang, Bei / Qian, Chunxiang	Experiment study of chemo-mechanical coupling behavior of leached concrete	2649-2654
Jensen, Jørgen L. / Quenneville, Pierre	Experimental investigations on row shear and splitting in bolted connections	2420-2425
Tsang, Steven W. F. / Chu, Louis Y. L.	An experimental study of the Tension Stiffening effect on the structural stiffness of Reinforced Concrete Cantilevered Balcony Structures using resonant frequency measurement approach	2690-2699
Vidya Sagar, R. / Prasad, B. K. Raghu	An experimental study on acoustic emission energy as a quantitative measure of size independent specific fracture energy of concrete beams	2349-2357
Atahan, Hakan Nuri / Oktar, Osman Nuri / Tasdemir, Mehmet Ali	Factors determining the correlations between high strength concrete properties	2214-2222
Saleh, A. M. M. / Trad, Metwally A.	Generation of asphalt performance grading map for Egypt based on the SUPERPAVE™ program	2248-2253
Du, Jia-Chong / Kuo, Ming-Feng	Grey relational-regression analysis for hot mix asphalt design	2627-2634
Dawood, Eethar Thanon / Ramli, Mahyuddin	High strength characteristics of cement mortar reinforced with hybrid fibres	2240-2247
Gokce, A. / Nagataki, S. / Saeki, T. / Hisada, M.	Identification of frost-susceptible recycled concrete aggregates for durability of concrete	2426-2431
Said-Mansour, Mohamed / Kadri, El-Hadj / Kenai, Said / Ghrici, Mohamed / Bennaceur, Rachid	Influence of calcined kaolin on mortar properties	2275-2282
Malumbela, Goitseone / Moyo, Pilate / Alexander, Mark	Influence of corrosion crack patterns on the rate of crack widening of RC beams	2540-2553
Ismail, Mohammad / Ismail, Mohamed ElGelany / Muhammad, Bala	Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash	2358-2364
Johari, M. A. Megat / Brooks, J. J. / Kabir, Shahid / Rivard, Patrice	Influence of supplementary cementitious materials on engineering properties of high strength concrete	2639-2648
de la Fuente, Albert / Aguado, Antonio / Molins, Climent / Armengou, Jaume	Innovations on components and testing for precast panels to be used in reinforced earth retaining walls	2198-2205
Ding, Yining	Investigations into the relationship between deflection and crack mouth opening displacement of SFRC beam	2432-2440
Attaelmanan, Moatasim / Feng, Cheng Pei / Ai, Al-Hadidy	Laboratory evaluation of HMA with high density polyethylene as a modifier	2764-2770
Xiong, G. J. / Wu, X. Y. / Li, F. F. / Yan, Z.	Load carrying capacity and ductility of circular concrete columns confined by ferrocement including steel bars	2263-2268
Hu, Sheng-De / Ye, Ben / Li, Li-Xin	Materials properties of thick-wall cold-rolled welded tube with a rectangular or square hollow section	2683-2689
Libre, Nicolas Ali / Shekarchi, Mohammad / Mahoutian, Mehrdad / Soroushian, Parviz	Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice	2458-2464
Yusoff, Nur Izzi Md. / Shaw, Montgomery T. / Airey, Gordon D.	Modelling the linear viscoelastic rheological properties of bituminous binders	2171-2189
Li, L. G. / Kwan, A. K. H.	Mortar design based on water film thickness	2381-2390
Lerma, José L. / Cabrelles, Miriam / Portalés, Cristina	Multitemporal thermal analysis to detect moisture on a building façade	2190-2197
Hu, Bo / Wang, Jian-guo / Li, Guo-Qiang	Numerical simulation and strength models of FRP-wrapped reinforced concrete columns under eccentric loading	2751-2763
Belis, Jan / Mocibob, Danijel / Luible, Andreas / Vandebroek, Marc	On the size and shape of initial out-of-plane curvatures in structural glass components	2700-2712
Choi, Han T. / West, Jeffrey S. / Soudki, Khaled A.	Partially bonded near-surface-mounted CFRP bars for strengthened concrete T-beams	2441-2449
Hussin, Azimah / Poole, Colin	Petrography evidence of the interfacial transition zone (ITZ) in the normal strength concrete containing granitic and limestone aggregates	2298-2303
Buratti, Nicola / Mazzotti, Claudio / Savoia, Marco	Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes	2713-2722
Ramezanianpour, Ali Akbar / Pilvar, Amirreza / Mahdikhani, Mahdi / Moodi, Faramarz	Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength	2472-2479
Vegas, I. / Ibañez, J. A. / Lisbona, A. / Sáez de Cortazar, A. / Frías, M.	Pre-normative research on the use of mixed recycled aggregates in unbound road sections	2674-2682
Zhao, Feng-qing / Li, Hao / Liu, Shao-jie / Chen, Jian-bo	Preparation and properties of an environment friendly polymer-modified waterproof mortar	2635-2638
Živica, Vladimir / Balkovic, Svetozar / Drabik, Milan	Properties of metakaolin geopolymer hardened paste prepared by high-pressure compaction	2206-2213
Pradhan, Bulu / Bhattacharjee, B.	Rebar corrosion in chloride environment	2565-2575
Szilágyi, Katalin / Borosnyói, Adorján / Zsigovics, István	Rebound surface hardness of concrete: Introduction of an empirical constitutive model	2480-2487
Moreno, F. / Rubio, M. C. / Martinez-Echevarria, M. J.	Reuse of sludge from the decorative quartz industry in hot bituminous mixes	2465-2471
Courard, Luc / Lenaers, Jean-François / Michel, Frédéric / Garbacz, Andrzej	Saturation level of the superficial zone of concrete and adhesion of repair systems	2488-2494
Leemann, Andreas / Lura, Pietro / Loser, Roman	Shrinkage and creep of SCC – The influence of paste volume and binder composition	2283-2289
Rupnow, Tyson D. / Wang, Kejin / Schaefer, Vernon R. / Tikalsky, Paul	A simple method for characterizing and predicting temperature behavior of ternary cementitious systems	2290-2297
Ferrotti, G. / Canestrari, F. / Virgili, A. / Grilli, A.	A strategic laboratory approach for the performance investigation of geogrids in flexible pavements	2343-2348
Belén, González-Fonteboa / Fernando, Martínez-Abella / Diego, Carro López / Sindy, Seara-Paz	Stress–strain relationship in axial compression for concrete using recycled saturated coarse aggregate	2335-2342
Sousa, Luísa C. / Castro, Catarina F. / António, Carlos C. / Sousa, Hipólito	Topology optimisation of masonry units from the thermal point of view using a genetic algorithm	2254-2262
Ho Sho, Kwang / Park, Sang Joon / Kim, Yong Jic / Lee, Gun Cheol / Kim, Kyoung Min	Utilization of separator bag filter dust for high early strength cement production	2318-2322
Yun, Taeyoung / Kim, Y. Richard	A viscoplastic constitutive model for hot mix asphalt in compression at high confining pressure	2733-2740

About this
data sheet
IssueID
22467
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 25, n. 5 (May 2011)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 25, n. 5 (May 2011)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.