Construction and Building Materials - v. 25, n. 5 (Mai 2011)

Erschienen:	Mai 2011

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Moreno, F. / Rubio, M. C. / Martinez-Echevarria, M. J.	Analysis of digestion time and the crumb rubber percentage in dry-process crumb rubber modified hot bituminous mixes	2323-2334
Kang, Bong-Gu / Hannawald, Joachim / Brameshuber, Wolfgang	Ar-glass filament material law for arbitrary quasi-static long-term loading	2228-2239
Barrios Padura, A. / Barrios Sevilla, J. / García Navarro, J.	Bearing capacity diagnosis of Santiago church (Jerez de la Frontera, Spain)	2519-2527
Yeboah, David / Taylor, Su / McPolin, Danny / Gilfillan, Raymond / Gilbert, Stephen	Behaviour of joints with bonded-in steel bars loaded parallel to the grain of timber elements	2312-2317
Garzón-Roca, Julio / Adam, José M. / Calderón, Pedro A.	Behaviour of RC columns strengthened by steel caging under combined bending and axial loads	2402-2412
Rodrigues, M. Fernanda S. / Teixeira, José M. C. / Cardoso, José C. P.	Buildings envelope anomalies: A visual survey methodology	2741-2750
Talero, R. / Trusilewicz, L. / Delgado, A. / Pedrajas, C. / Lannegrand, R. / Rahhal, V. / Mejía, R. / Delvasto, S. / Ramírez, F. A.	Comparative and semi-quantitative XRD analysis of Friedel's salt originating from pozzolan and Portland cement	2370-2380
Howson, Jonathan / Masad, Eyad / Bhasin, Amit / Little, Dallas / Lytton, Robert	Comprehensive analysis of surface free energy of asphalts and aggregates and the effects of changes in pH	2554-2564
Piekarczyk, J. / Piekarczyk, W. / Blazewicz, S.	Compression strength of concrete cylinders reinforced with carbon fiber laminate	2365-2369
Senthamarai, RM. / Devadas Manoharan, P. / Gobinath, D.	Concrete made from ceramic industry waste: Durability properties	2413-2419
Yahyaei-Moayyed, M. / Taheri, F.	Creep response of glued-laminated beam reinforced with pre-stressed sub-laminated composite	2495-2506
Li, Wenting / Sun, Wei / Jiang, Jinyang	Damage of concrete experiencing flexural fatigue load and closed freeze/thaw cycles simultaneously	2604-2610
Wang, Huanzi / Belarbi, Abdeldjelil	Ductility characteristics of fiber-reinforced-concrete beams reinforced with FRP rebars	2391-2401
Ayhan, Mustafa / Gönül, Hatice / Gönül, İsmail Ağa / Karakuş, Askeri	Effect of basic pumice on morphologic properties of interfacial transition zone in load-bearing lightweight/semi-lightweight concretes	2507-2518
Kang, Su Tae / Lee, Bang Yeon / Kim, Jin-Keun / Kim, Yun Yong	The effect of fibre distribution characteristics on the flexural strength of steel fibre-reinforced ultra high strength concrete	2450-2457
Zhang, Wu-man / Ba, Heng-jing / Chen, Shang-jiang	Effect of fly ash and repeated loading on diffusion coefficient in chloride migration test	2269-2274
Tapan, M. / Aboutaha, R. S.	Effect of steel corrosion and loss of concrete cover on strength of deteriorated RC columns	2596-2603
Hopkin, D. J. / El-Rimawi, J. / Silberschmidt, V. / Lennon, T.	An effective thermal property framework for softwood in parametric design fires: Comparison of the Eurocode 5 parametric charring approach and advanced calculation models	2584-2595
Lee, Gerry / Ling, Tung-Chai / Wong, Yuk-Lung / Poon, Chi-Sun	Effects of crushed glass cullet sizes, casting methods and pozzolanic materials on ASR of concrete blocks	2611-2618
Yi, Seong-Tae / Hyun, Tae-Yang / Kim, Jin-Keun	The effects of hydraulic pressure and crack width on water permeability of penetration crack-induced concrete	2576-2583
Tanarslan, H. M.	The effects of NSM CFRP reinforcements for improving the shear capacity of RC beams	2663-2673
Muhammad, Bala / Ismail, Mohammad / Yussuf, A. A. / Muhammad, A. R. B.	Elastomeric influence of natural rubber latex on cement mortar at high temperatures using thermal degradation analysis	2223-2227
Jing, Xu / Wu, Yao	Electrochemical studies on the performance of conductive overlay material in cathodic protection of reinforced concrete	2655-2662
Cromwell, J. R. / Harries, K. A. / Shahrooz, B. M.	Environmental durability of externally bonded FRP materials intended for repair of concrete structures	2528-2539
Walubita, Lubinda F. / Alvarez, Allex E. / Simate, Geoffrey S.	Evaluating and comparing different methods and models for generating relaxation modulus master-curves for asphalt mixes	2619-2626
Sanchez-Alonso, Elsa / Vega-Zamanillo, Angel / Castro-Fresno, Daniel / DelRio-Prat, Maria	Evaluation of compactability and mechanical properties of bituminous mixes with warm additives	2304-2311
Pinna, Daniela / Salvadori, Barbara / Porcinai, Simone	Evaluation of the application conditions of artificial protection treatments on salt-laden limestones and marble	2723-2732
Huang, Bei / Qian, Chunxiang	Experiment study of chemo-mechanical coupling behavior of leached concrete	2649-2654
Jensen, Jørgen L. / Quenneville, Pierre	Experimental investigations on row shear and splitting in bolted connections	2420-2425
Tsang, Steven W. F. / Chu, Louis Y. L.	An experimental study of the Tension Stiffening effect on the structural stiffness of Reinforced Concrete Cantilevered Balcony Structures using resonant frequency measurement approach	2690-2699
Vidya Sagar, R. / Prasad, B. K. Raghu	An experimental study on acoustic emission energy as a quantitative measure of size independent specific fracture energy of concrete beams	2349-2357
Atahan, Hakan Nuri / Oktar, Osman Nuri / Tasdemir, Mehmet Ali	Factors determining the correlations between high strength concrete properties	2214-2222
Saleh, A. M. M. / Trad, Metwally A.	Generation of asphalt performance grading map for Egypt based on the SUPERPAVE™ program	2248-2253
Du, Jia-Chong / Kuo, Ming-Feng	Grey relational-regression analysis for hot mix asphalt design	2627-2634
Dawood, Eethar Thanon / Ramli, Mahyuddin	High strength characteristics of cement mortar reinforced with hybrid fibres	2240-2247
Gokce, A. / Nagataki, S. / Saeki, T. / Hisada, M.	Identification of frost-susceptible recycled concrete aggregates for durability of concrete	2426-2431
Said-Mansour, Mohamed / Kadri, El-Hadj / Kenai, Said / Ghrici, Mohamed / Bennaceur, Rachid	Influence of calcined kaolin on mortar properties	2275-2282
Malumbela, Goitseone / Moyo, Pilate / Alexander, Mark	Influence of corrosion crack patterns on the rate of crack widening of RC beams	2540-2553
Ismail, Mohammad / Ismail, Mohamed ElGelany / Muhammad, Bala	Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash	2358-2364
Johari, M. A. Megat / Brooks, J. J. / Kabir, Shahid / Rivard, Patrice	Influence of supplementary cementitious materials on engineering properties of high strength concrete	2639-2648
de la Fuente, Albert / Aguado, Antonio / Molins, Climent / Armengou, Jaume	Innovations on components and testing for precast panels to be used in reinforced earth retaining walls	2198-2205
Ding, Yining	Investigations into the relationship between deflection and crack mouth opening displacement of SFRC beam	2432-2440
Attaelmanan, Moatasim / Feng, Cheng Pei / Ai, Al-Hadidy	Laboratory evaluation of HMA with high density polyethylene as a modifier	2764-2770
Xiong, G. J. / Wu, X. Y. / Li, F. F. / Yan, Z.	Load carrying capacity and ductility of circular concrete columns confined by ferrocement including steel bars	2263-2268
Hu, Sheng-De / Ye, Ben / Li, Li-Xin	Materials properties of thick-wall cold-rolled welded tube with a rectangular or square hollow section	2683-2689
Libre, Nicolas Ali / Shekarchi, Mohammad / Mahoutian, Mehrdad / Soroushian, Parviz	Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice	2458-2464
Yusoff, Nur Izzi Md. / Shaw, Montgomery T. / Airey, Gordon D.	Modelling the linear viscoelastic rheological properties of bituminous binders	2171-2189
Li, L. G. / Kwan, A. K. H.	Mortar design based on water film thickness	2381-2390
Lerma, José L. / Cabrelles, Miriam / Portalés, Cristina	Multitemporal thermal analysis to detect moisture on a building façade	2190-2197
Hu, Bo / Wang, Jian-guo / Li, Guo-Qiang	Numerical simulation and strength models of FRP-wrapped reinforced concrete columns under eccentric loading	2751-2763
Belis, Jan / Mocibob, Danijel / Luible, Andreas / Vandebroek, Marc	On the size and shape of initial out-of-plane curvatures in structural glass components	2700-2712
Choi, Han T. / West, Jeffrey S. / Soudki, Khaled A.	Partially bonded near-surface-mounted CFRP bars for strengthened concrete T-beams	2441-2449
Hussin, Azimah / Poole, Colin	Petrography evidence of the interfacial transition zone (ITZ) in the normal strength concrete containing granitic and limestone aggregates	2298-2303
Buratti, Nicola / Mazzotti, Claudio / Savoia, Marco	Post-cracking behaviour of steel and macro-synthetic fibre-reinforced concretes	2713-2722
Ramezanianpour, Ali Akbar / Pilvar, Amirreza / Mahdikhani, Mahdi / Moodi, Faramarz	Practical evaluation of relationship between concrete resistivity, water penetration, rapid chloride penetration and compressive strength	2472-2479
Vegas, I. / Ibañez, J. A. / Lisbona, A. / Sáez de Cortazar, A. / Frías, M.	Pre-normative research on the use of mixed recycled aggregates in unbound road sections	2674-2682
Zhao, Feng-qing / Li, Hao / Liu, Shao-jie / Chen, Jian-bo	Preparation and properties of an environment friendly polymer-modified waterproof mortar	2635-2638
Živica, Vladimir / Balkovic, Svetozar / Drabik, Milan	Properties of metakaolin geopolymer hardened paste prepared by high-pressure compaction	2206-2213
Pradhan, Bulu / Bhattacharjee, B.	Rebar corrosion in chloride environment	2565-2575
Szilágyi, Katalin / Borosnyói, Adorján / Zsigovics, István	Rebound surface hardness of concrete: Introduction of an empirical constitutive model	2480-2487
Moreno, F. / Rubio, M. C. / Martinez-Echevarria, M. J.	Reuse of sludge from the decorative quartz industry in hot bituminous mixes	2465-2471
Courard, Luc / Lenaers, Jean-François / Michel, Frédéric / Garbacz, Andrzej	Saturation level of the superficial zone of concrete and adhesion of repair systems	2488-2494
Leemann, Andreas / Lura, Pietro / Loser, Roman	Shrinkage and creep of SCC – The influence of paste volume and binder composition	2283-2289
Rupnow, Tyson D. / Wang, Kejin / Schaefer, Vernon R. / Tikalsky, Paul	A simple method for characterizing and predicting temperature behavior of ternary cementitious systems	2290-2297
Ferrotti, G. / Canestrari, F. / Virgili, A. / Grilli, A.	A strategic laboratory approach for the performance investigation of geogrids in flexible pavements	2343-2348
Belén, González-Fonteboa / Fernando, Martínez-Abella / Diego, Carro López / Sindy, Seara-Paz	Stress–strain relationship in axial compression for concrete using recycled saturated coarse aggregate	2335-2342
Sousa, Luísa C. / Castro, Catarina F. / António, Carlos C. / Sousa, Hipólito	Topology optimisation of masonry units from the thermal point of view using a genetic algorithm	2254-2262
Ho Sho, Kwang / Park, Sang Joon / Kim, Yong Jic / Lee, Gun Cheol / Kim, Kyoung Min	Utilization of separator bag filter dust for high early strength cement production	2318-2322
Yun, Taeyoung / Kim, Y. Richard	A viscoplastic constitutive model for hot mix asphalt in compression at high confining pressure	2733-2740

Über diese
Datenseite
IssueID
22467
Veröffentlicht am:
16.12.2018
Geändert am:
16.12.2018

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - v. 25, n. 5 (Mai 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - v. 25, n. 5 (Mai 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.