Construction and Building Materials - v. 25, n. 2 (February 2011)

Published:	February 2011

Articles in this Issue

Author(s)	Title	Page(s)
Keskin, Hakan / Tekin, Ahmet	Abrasion resistances of cellulosic, synthetic, polyurethane, waterborne and acidhardening varnishes used woods	638-643
Benzarti, Karim / Chataigner, Sylvain / Quiertant, Marc / Marty, Céline / Aubagnac, Christophe	Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays	523-538
Naghipour, M. / Nematzadeh, M. / Yahyazadeh, Q.	Analytical and experimental study on flexural performance of WPC–FRP beams	829-837
Pozolo, Andrew / Andrawes, Bassem	Analytical prediction of transfer length in prestressed self-consolidating concrete girders using pull-out test results	1026-1036
Al-Salloum, Yousef A. / Elsanadedy, Hussein M. / Abadel, Aref A.	Behavior of FRP-confined concrete after high temperature exposure	838-850
Quiertant, Marc / Clément, Jean-Luc	Behavior of RC columns strengthened with different CFRP systems under eccentric loading	452-460
Hamad, Bilal / Masri, Adnan / Basha, Hisham / Baalbaki, Oussama	Behavior of T-shaped reinforced concrete beams partially confined by structural steel	1037-1043
Nocuń-Wczelik, W. / Konik, Z. / Stok, A.	Blended systems with calcium aluminate and calcium sulphate expansive additives	939-943
Sayed Ahmad, Firas / Foret, Gilles / Le Roy, Robert	Bond between carbon fibre-reinforced polymer (CFRP) bars and ultra high performance fibre reinforced concrete (UHPFRC): Experimental study	479-485
Djouani, Fatma / Connan, Carole / Delamar, Michel / Chehimi, Mohamed M. / Benzarti, Karim	Cement paste–epoxy adhesive interactions	411-423
Pacheco-Torgal, Fernando / Jalali, Said	Cementitious building materials reinforced with vegetable fibres: A review	575-581
Shannag, M. J.	Characteristics of lightweight concrete containing mineral admixtures	658-662
Aveldaño, Raquel R. / Ortega, Néstor F.	Characterization of concrete cracking due to corrosion of reinforcements in different environments	630-637
Martín-Morales, M. / Zamorano, M. / Ruiz-Moyano, A. / Valverde-Espinosa, I.	Characterization of recycled aggregates construction and demolition waste for concrete production following the Spanish Structural Concrete Code EHE-08	742-748
Ozcelik, Y. / Ciccu, R. / Costa, G.	Comparison of the water jet and some traditional stone surface treatment methods in different lithotypes	678-687
Soutsos, Marios N. / Tang, Kangkang / Millard, Stephen G.	Concrete building blocks made with recycled demolition aggregate	726-735
Ferrier, E. / Michel, L. / Jurkiewiez, B. / Hamelin, P.	Creep behavior of adhesives used for external FRP strengthening of RC structures	461-467
Wang, Yuan-Feng / Ma, Yi-Shuo / Zhou, Lang	Creep of FRP-wrapped concrete columns with or without fly ash under axial load	697-704
Argoul, Pierre / Benzarti, Karim / Freddi, Francesco / Frémond, Michel / Nguyen, Thi-Hoa Tam	A damage model to predict the durability of bonded assemblies – Part II: Parameter identification and preliminary results for accelerated ageing tests	556-567
Benzarti, Karim / Freddi, Francesco / Frémond, Michel	A damage model to predict the durability of bonded assemblies. Part I: Debonding behavior of FRP strengthened concrete structures	547-555
Katsioti, M. / Patsikas, N. / Pipilikaki, P. / Katsiotis, N. / Mikedi, K. / Chaniotakis, M.	Delayed ettringite formation (DEF) in mortars of white cement	900-905
Sánchez, J. Sanjurjo / Romaní, J. R. Vidal / Alves, C.	Deposition of particles on gypsum-rich coatings of historic buildings in urban and rural environments	813-822
Guimarães, A. T. C. / Climent, M. A. / de Vera, G. / Vicente, F. J. / Rodrigues, F. T. / Andrade, C.	Determination of chloride diffusivity through partially saturated Portland cement concrete by a simplified procedure	785-790
Collop, A. C. / Sutanto, M. H. / Airey, G. D. / Elliott, Richard C.	Development of an automatic torque test to measure the shear bond strength between asphalt	623-629
Frías, M. / Jiménez-Mateos, J. M. / Pfretzschner, J. / Olmeda, J. / Rodríguez, R. M. / Sánchez de Rojas, M. I.	Development of blended cement mortars with acoustic properties using petroleum coke	1086-1092
Sisomphon, K. / Çopuroğlu, O. / Fraaij, A. L. A.	Durability of blast-furnace slag mortars subjected to sodium monofluorophosphate application	823-828
Khattab, Magdy M. / Abdel-Rahman, H. A. / Younes, M. M.	Durability of gamma irradiated polymer-impregnated blended cement pastes	651-657
Nishizaki, Itaru / Kato, Yuya	Durability of the adhesive bond between continuous fibre sheet reinforcements and concrete in an outdoor environment	515-522
Izaguirre, A. / Lanas, J. / Alvarez, J. I.	Effect of a polypropylene fibre on the behaviour of aerial lime-based mortars	992-1000
Al-Jabri, Khalifa S. / Al-Saidy, Abdullah H. / Taha, Ramzi	Effect of copper slag as a fine aggregate on the properties of cement mortars and concrete	933-938
Seleem, Hosam El_Din H. / Rashad, Alaa M. / Elsokary, Tarek.	Effect of elevated temperature on physico-mechanical properties of blended cement concrete	1009-1017
Uygunoğlu, Tayfun	Effect of fiber type and content on bleeding of steel fiber reinforced concrete	766-772
Shoukry, Samir N. / William, Gergis W. / Downie, Brian / Riad, Mourad Y.	Effect of moisture and temperature on the mechanical properties of concrete	688-696
Mu, Song / Ma, Bao-Guo / De Schutter, Geert / Li, Xiang-guo / Wang, Yao-cheng / Jian, Shou-wei	Effect of shale addition on properties of sintered coal fly ash	617-622
Wang, Her-Yung	The effect of the proportion of thin film transistor–liquid crystal display (TFT–LCD) optical waste glass as a partial substitute for cement in cement mortar	791-797
Fu, Pengcheng / Jones, David / Harvey, John T.	The effects of asphalt binder and granular material characteristics on foamed asphalt mix strength	1093-1101
Ergün, Ali	Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete	806-812
Sanchez, M. / Alonso, M. C.	Electrochemical chloride removal in reinforced concrete structures: Improvement of effectiveness by simultaneous migration of calcium nitrite	873-878
Othuman, Md Azree / Wang, Y. C.	Elevated-temperature thermal properties of lightweight foamed concrete	705-716
DelRio-Prat, Maria / Vega-Zamanillo, Angel / Castro-Fresno, Daniel / Calzada-Perez, Miguel Angel	Energy consumption during compaction with a Gyratory Intensive Compactor Tester. Estimation models	979-986
Garg, Mridul / Minocha, A. K. / Jain, Neeraj	Environment hazard mitigation of waste gypsum and chalk: Use in construction materials	944-949
Akisetty, Chandra / Xiao, Feipeng / Gandhi, Tejash / Amirkhanian, Serji	Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive	950-956
Chataigner, Sylvain / Caron, Jean-François / Duong, Van Anh / Diaz Diaz, Alberto	Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint	432-441
Diakhaté, M. / Millien, A. / Petit, C. / Phelipot-Mardelé, A. / Pouteau, B.	Experimental investigation of tack coat fatigue performance: Towards an improved lifetime assessment of pavement structure interfaces	1123-1133
Papanicolaou, Catherine / Triantafillou, Thanasis / Lekka, Maria	Externally bonded grids as strengthening and seismic retrofitting materials of masonry panels	504-514
Ferrier, E. / Bigaud, D. / Clément, J. C. / Hamelin, P.	Fatigue-loading effect on RC beams strengthened with externally bonded FRP	539-546
Shi, Xianming / Fay, Laura / Peterson, Marijean M. / Berry, Michael / Mooney, Matthew	A FESEM/EDX investigation into how continuous deicer exposure affects the chemistry of Portland cement concrete	957-966
Hossain, Md. Zakaria / Awal, A. S. M. Abdul	Flexural response of hybrid carbon fiber thin cement composites	670-677
Safiuddin, Md. / West, J. S. / Soudki, K. A.	Flowing ability of the mortars formulated from self-compacting concretes incorporating rice husk ash	973-978
Wang, Ru / Wang, Pei-Ming	Formation of hydrates of calcium aluminates in cement pastes with different dosages of SBR powder	736-741
Praticò, F. G. / Moro, A.	In-lab and on-site measurements of hot mix asphalt density: Convergence and divergence hypotheses	1065-1071
Liu, Miao	Incorporating ground glass in self-compacting concrete	919-925
Xu, Jinxia / Jiang, Linhua / Wang, Weilun / Jiang, Yu	Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete	663-669
Yüksel, İsa / Siddique, Rafat / Ozkan, Omer	Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement	967-972
Masmoudi, Radhouane / Masmoudi, Abdelmonem / Ouezdou, Mongi Ben / Daoud, Atef	Long-term bond performance of GFRP bars in concrete under temperature ranging from 20°C to 80°C	486-493
Mohammed, Bashar S. / Fang, Ong Chuan	Mechanical and durability properties of concretes containing paper-mill residuals and fly ash	717-725
Perrin, B. / Vu, N. A. / Multon, S. / Voland, T. / Ducroquetz, C.	Mechanical behaviour of fired clay materials subjected to freeze–thaw cycles	1056-1064
Hadj-sadok, Ahmed / Kenai, Said / Courard, Luc / Darimont, Anne	Microstructure and durability of mortars modified with medium active blast furnace slag	1018-1025
Malumbela, Goitseone / Alexander, Mark / Moyo, Pilate	Model for cover cracking of RC beams due to partial surface steel corrosion	987-991
Kalyoncuoglu, S. F. / Tigdemir, M.	A model for dynamic creep evaluation of SBS modified HMA mixtures	859-866
Koronthalyova, Olga	Moisture storage capacity and microstructure of ceramic brick and autoclaved aerated concrete	879-885
You, Zhanping / Mills-Beale, Julian / Foley, Justin M. / Roy, Samit / Odegard, Gregory M. / Dai, Qingli / Goh, Shu Wei	Nanoclay-modified asphalt materials: Preparation and characterization	1072-1078
Pacheco-Torgal, F. / Jalali, Said	Nanotechnology: Advantages and drawbacks in the field of construction and building materials	582-590
Blanco Martín, Laura / Tijani, Michel / Hadj-Hassen, Faouzi	A new analytical solution to the mechanical behaviour of fully grouted rockbolts subjected to pull-out tests	749-755
Zhou, T. / Guan, Z. W.	A new approach to obtain flat nail embedding strength of double-sided nail plate joints	598-607
Chataigner, Sylvain / Caron, Jean-François	Optimisation of the shear stress transfer in structural bonded assemblies using a curved bonded joint geometry	442-451
Zhang, Mao-hua / Li, Hui	Pore structure and chloride permeability of concrete containing nano-particles for pavement	608-616
Zain, M. F. M. / Islam, M. N. / Mahmud, F. / Jamil, M.	Production of rice husk ash for use in concrete as a supplementary cementitious material	798-805
Al-Khateeb, Ghazi G. / Al-Akhras, Nabil M.	Properties of Portland cement-modified asphalt binder using Superpave tests	926-932
Shang, Lina / Wang, Shifeng / Zhang, Yong / Zhang, Yinxi	Pyrolyzed wax from recycled cross-linked polyethylene as warm mix asphalt (WMA) additive for SBS modified asphalt	886-891
Hadi, M. N. S.	Rehabilitating destructed reinforced concrete T connections by steel straps	851-858
Obaidat, Yasmeen Taleb / Heyden, Susanne / Dahlblom, Ola / Abu-Farsakh, Ghazi / Abdel-Jawad, Yahia	Retrofitting of reinforced concrete beams using composite laminates	591-597
Özen, Halit	Rutting evaluation of hydrated lime and SBS modified asphalt mixtures for laboratory and field compacted samples	756-765
Yang, Keun-Hyeok / Kim, Gwang-Hee / Yang, Hong-Suk	Shear behavior of continuous reinforced concrete T-beams using wire rope as internal shear reinforcement	911-918
Borri, A. / Castori, G. / Corradi, M.	Shear behavior of masonry panels strengthened by high strength steel cords	494-503
Taillade, Frédéric / Quiertant, Marc / Benzarti, Karim / Aubagnac, Christophe	Shearography and pulsed stimulated infrared thermography applied to a nondestructive evaluation of FRP strengthening systems bonded on concrete structures	568-574
Lanzón, Marcos / Garrido, A. / García-Ruiz, P. A.	Stabilization of sodium oleate as calcium oleate in cement-based mortars made with limestone fillers	1001-1008
Bhutta, Muhammad Aamer Rafique / Ohama, Yoshihiko / Tsuruta, Ken	Strength properties of polymer mortar panels using methyl methacrylate solution of waste expanded polystyrene as binder	779-784
Yang, Lin-hu / Han, Zhu / Li, Cheng-fang	Strengths and flexural strain of CRC specimens at low temperature	906-910
Bocci, M. / Grilli, A. / Cardone, F. / Graziani, A.	A study on the mechanical behaviour of cement–bitumen treated materials	773-778
Rosell-Lam, M. / Villar-Cociña, E. / Frías, M.	Study on the pozzolanic properties of a natural Cuban zeolitic rock by conductometric method: Kinetic parameters	644-650
Djouani, Fatma / Herbst, Frederic / Chehimi, Mohamed M. / Benzarti, Karim	Synthesis, characterization and reinforcing properties of novel, reactive clay/poly(glycidyl methacrylate) nanocomposites	424-431
Dai, Qingli	Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images	1102-1114
Park, Sung-Sik	Unconfined compressive strength and ductility of fiber-reinforced cemented sand	1134-1138
Chataigner, Sylvain / Caron, Jean-François / Benzarti, Karim / Quiertant, Marc / Aubagnac, Christophe	Use of a single lap shear test to characterize composite-to-concrete or composite-to-steel bonded interfaces	468-478
Kim, H. K. / Lee, H. K.	Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete	1115-1122
Sevil, Tuğçe / Baran, Mehmet / Bilir, Turhan / Canbay, Erdem	Use of steel fiber reinforced mortar for seismic strengthening	892-899
Galvão, José Carlos Alves / Portella, Kleber Franke / Joukoski, Alex / Mendes, Roberto / Ferreira, Elizeu Santos	Use of waste polymers in concrete for repair of dam hydraulic surfaces	1049-1055
Fang, Yonghao / Gu, Yamin / Kang, Qiubo / Wen, Quan / Dai, Pin	Utilization of copper tailing for autoclaved sand–lime brick	867-872
Memon, Shazim Ali / Shaikh, Muhammad Ali / Akbar, Hassan	Utilization of Rice Husk Ash as viscosity modifying agent in Self Compacting Concrete	1044-1048
Collet, Florence / Achchaq, Fouzia / Djellab, Karim / Marmoret, Laurent / Beji, Hassen	Water vapor properties of two hemp wools manufactured with different treatments	1079-1085

About this
data sheet
IssueID
22464
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 25, n. 2 (February 2011)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 25, n. 2 (February 2011)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.