Construction and Building Materials - v. 25, n. 2 (Februar 2011)

Erschienen:	Februar 2011

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Keskin, Hakan / Tekin, Ahmet	Abrasion resistances of cellulosic, synthetic, polyurethane, waterborne and acidhardening varnishes used woods	638-643
Benzarti, Karim / Chataigner, Sylvain / Quiertant, Marc / Marty, Céline / Aubagnac, Christophe	Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays	523-538
Naghipour, M. / Nematzadeh, M. / Yahyazadeh, Q.	Analytical and experimental study on flexural performance of WPC–FRP beams	829-837
Pozolo, Andrew / Andrawes, Bassem	Analytical prediction of transfer length in prestressed self-consolidating concrete girders using pull-out test results	1026-1036
Al-Salloum, Yousef A. / Elsanadedy, Hussein M. / Abadel, Aref A.	Behavior of FRP-confined concrete after high temperature exposure	838-850
Quiertant, Marc / Clément, Jean-Luc	Behavior of RC columns strengthened with different CFRP systems under eccentric loading	452-460
Hamad, Bilal / Masri, Adnan / Basha, Hisham / Baalbaki, Oussama	Behavior of T-shaped reinforced concrete beams partially confined by structural steel	1037-1043
Nocuń-Wczelik, W. / Konik, Z. / Stok, A.	Blended systems with calcium aluminate and calcium sulphate expansive additives	939-943
Sayed Ahmad, Firas / Foret, Gilles / Le Roy, Robert	Bond between carbon fibre-reinforced polymer (CFRP) bars and ultra high performance fibre reinforced concrete (UHPFRC): Experimental study	479-485
Djouani, Fatma / Connan, Carole / Delamar, Michel / Chehimi, Mohamed M. / Benzarti, Karim	Cement paste–epoxy adhesive interactions	411-423
Pacheco-Torgal, Fernando / Jalali, Said	Cementitious building materials reinforced with vegetable fibres: A review	575-581
Shannag, M. J.	Characteristics of lightweight concrete containing mineral admixtures	658-662
Aveldaño, Raquel R. / Ortega, Néstor F.	Characterization of concrete cracking due to corrosion of reinforcements in different environments	630-637
Martín-Morales, M. / Zamorano, M. / Ruiz-Moyano, A. / Valverde-Espinosa, I.	Characterization of recycled aggregates construction and demolition waste for concrete production following the Spanish Structural Concrete Code EHE-08	742-748
Ozcelik, Y. / Ciccu, R. / Costa, G.	Comparison of the water jet and some traditional stone surface treatment methods in different lithotypes	678-687
Soutsos, Marios N. / Tang, Kangkang / Millard, Stephen G.	Concrete building blocks made with recycled demolition aggregate	726-735
Ferrier, E. / Michel, L. / Jurkiewiez, B. / Hamelin, P.	Creep behavior of adhesives used for external FRP strengthening of RC structures	461-467
Wang, Yuan-Feng / Ma, Yi-Shuo / Zhou, Lang	Creep of FRP-wrapped concrete columns with or without fly ash under axial load	697-704
Argoul, Pierre / Benzarti, Karim / Freddi, Francesco / Frémond, Michel / Nguyen, Thi-Hoa Tam	A damage model to predict the durability of bonded assemblies – Part II: Parameter identification and preliminary results for accelerated ageing tests	556-567
Benzarti, Karim / Freddi, Francesco / Frémond, Michel	A damage model to predict the durability of bonded assemblies. Part I: Debonding behavior of FRP strengthened concrete structures	547-555
Katsioti, M. / Patsikas, N. / Pipilikaki, P. / Katsiotis, N. / Mikedi, K. / Chaniotakis, M.	Delayed ettringite formation (DEF) in mortars of white cement	900-905
Sánchez, J. Sanjurjo / Romaní, J. R. Vidal / Alves, C.	Deposition of particles on gypsum-rich coatings of historic buildings in urban and rural environments	813-822
Guimarães, A. T. C. / Climent, M. A. / de Vera, G. / Vicente, F. J. / Rodrigues, F. T. / Andrade, C.	Determination of chloride diffusivity through partially saturated Portland cement concrete by a simplified procedure	785-790
Collop, A. C. / Sutanto, M. H. / Airey, G. D. / Elliott, Richard C.	Development of an automatic torque test to measure the shear bond strength between asphalt	623-629
Frías, M. / Jiménez-Mateos, J. M. / Pfretzschner, J. / Olmeda, J. / Rodríguez, R. M. / Sánchez de Rojas, M. I.	Development of blended cement mortars with acoustic properties using petroleum coke	1086-1092
Sisomphon, K. / Çopuroğlu, O. / Fraaij, A. L. A.	Durability of blast-furnace slag mortars subjected to sodium monofluorophosphate application	823-828
Khattab, Magdy M. / Abdel-Rahman, H. A. / Younes, M. M.	Durability of gamma irradiated polymer-impregnated blended cement pastes	651-657
Nishizaki, Itaru / Kato, Yuya	Durability of the adhesive bond between continuous fibre sheet reinforcements and concrete in an outdoor environment	515-522
Izaguirre, A. / Lanas, J. / Alvarez, J. I.	Effect of a polypropylene fibre on the behaviour of aerial lime-based mortars	992-1000
Al-Jabri, Khalifa S. / Al-Saidy, Abdullah H. / Taha, Ramzi	Effect of copper slag as a fine aggregate on the properties of cement mortars and concrete	933-938
Seleem, Hosam El_Din H. / Rashad, Alaa M. / Elsokary, Tarek.	Effect of elevated temperature on physico-mechanical properties of blended cement concrete	1009-1017
Uygunoğlu, Tayfun	Effect of fiber type and content on bleeding of steel fiber reinforced concrete	766-772
Shoukry, Samir N. / William, Gergis W. / Downie, Brian / Riad, Mourad Y.	Effect of moisture and temperature on the mechanical properties of concrete	688-696
Mu, Song / Ma, Bao-Guo / De Schutter, Geert / Li, Xiang-guo / Wang, Yao-cheng / Jian, Shou-wei	Effect of shale addition on properties of sintered coal fly ash	617-622
Wang, Her-Yung	The effect of the proportion of thin film transistor–liquid crystal display (TFT–LCD) optical waste glass as a partial substitute for cement in cement mortar	791-797
Fu, Pengcheng / Jones, David / Harvey, John T.	The effects of asphalt binder and granular material characteristics on foamed asphalt mix strength	1093-1101
Ergün, Ali	Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete	806-812
Sanchez, M. / Alonso, M. C.	Electrochemical chloride removal in reinforced concrete structures: Improvement of effectiveness by simultaneous migration of calcium nitrite	873-878
Othuman, Md Azree / Wang, Y. C.	Elevated-temperature thermal properties of lightweight foamed concrete	705-716
DelRio-Prat, Maria / Vega-Zamanillo, Angel / Castro-Fresno, Daniel / Calzada-Perez, Miguel Angel	Energy consumption during compaction with a Gyratory Intensive Compactor Tester. Estimation models	979-986
Garg, Mridul / Minocha, A. K. / Jain, Neeraj	Environment hazard mitigation of waste gypsum and chalk: Use in construction materials	944-949
Akisetty, Chandra / Xiao, Feipeng / Gandhi, Tejash / Amirkhanian, Serji	Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive	950-956
Chataigner, Sylvain / Caron, Jean-François / Duong, Van Anh / Diaz Diaz, Alberto	Experimental and numerical investigation of shear strain along an elasto-plastic bonded lap joint	432-441
Diakhaté, M. / Millien, A. / Petit, C. / Phelipot-Mardelé, A. / Pouteau, B.	Experimental investigation of tack coat fatigue performance: Towards an improved lifetime assessment of pavement structure interfaces	1123-1133
Papanicolaou, Catherine / Triantafillou, Thanasis / Lekka, Maria	Externally bonded grids as strengthening and seismic retrofitting materials of masonry panels	504-514
Ferrier, E. / Bigaud, D. / Clément, J. C. / Hamelin, P.	Fatigue-loading effect on RC beams strengthened with externally bonded FRP	539-546
Shi, Xianming / Fay, Laura / Peterson, Marijean M. / Berry, Michael / Mooney, Matthew	A FESEM/EDX investigation into how continuous deicer exposure affects the chemistry of Portland cement concrete	957-966
Hossain, Md. Zakaria / Awal, A. S. M. Abdul	Flexural response of hybrid carbon fiber thin cement composites	670-677
Safiuddin, Md. / West, J. S. / Soudki, K. A.	Flowing ability of the mortars formulated from self-compacting concretes incorporating rice husk ash	973-978
Wang, Ru / Wang, Pei-Ming	Formation of hydrates of calcium aluminates in cement pastes with different dosages of SBR powder	736-741
Praticò, F. G. / Moro, A.	In-lab and on-site measurements of hot mix asphalt density: Convergence and divergence hypotheses	1065-1071
Liu, Miao	Incorporating ground glass in self-compacting concrete	919-925
Xu, Jinxia / Jiang, Linhua / Wang, Weilun / Jiang, Yu	Influence of CaCl2 and NaCl from different sources on chloride threshold value for the corrosion of steel reinforcement in concrete	663-669
Yüksel, İsa / Siddique, Rafat / Ozkan, Omer	Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement	967-972
Masmoudi, Radhouane / Masmoudi, Abdelmonem / Ouezdou, Mongi Ben / Daoud, Atef	Long-term bond performance of GFRP bars in concrete under temperature ranging from 20°C to 80°C	486-493
Mohammed, Bashar S. / Fang, Ong Chuan	Mechanical and durability properties of concretes containing paper-mill residuals and fly ash	717-725
Perrin, B. / Vu, N. A. / Multon, S. / Voland, T. / Ducroquetz, C.	Mechanical behaviour of fired clay materials subjected to freeze–thaw cycles	1056-1064
Hadj-sadok, Ahmed / Kenai, Said / Courard, Luc / Darimont, Anne	Microstructure and durability of mortars modified with medium active blast furnace slag	1018-1025
Malumbela, Goitseone / Alexander, Mark / Moyo, Pilate	Model for cover cracking of RC beams due to partial surface steel corrosion	987-991
Kalyoncuoglu, S. F. / Tigdemir, M.	A model for dynamic creep evaluation of SBS modified HMA mixtures	859-866
Koronthalyova, Olga	Moisture storage capacity and microstructure of ceramic brick and autoclaved aerated concrete	879-885
You, Zhanping / Mills-Beale, Julian / Foley, Justin M. / Roy, Samit / Odegard, Gregory M. / Dai, Qingli / Goh, Shu Wei	Nanoclay-modified asphalt materials: Preparation and characterization	1072-1078
Pacheco-Torgal, F. / Jalali, Said	Nanotechnology: Advantages and drawbacks in the field of construction and building materials	582-590
Blanco Martín, Laura / Tijani, Michel / Hadj-Hassen, Faouzi	A new analytical solution to the mechanical behaviour of fully grouted rockbolts subjected to pull-out tests	749-755
Zhou, T. / Guan, Z. W.	A new approach to obtain flat nail embedding strength of double-sided nail plate joints	598-607
Chataigner, Sylvain / Caron, Jean-François	Optimisation of the shear stress transfer in structural bonded assemblies using a curved bonded joint geometry	442-451
Zhang, Mao-hua / Li, Hui	Pore structure and chloride permeability of concrete containing nano-particles for pavement	608-616
Zain, M. F. M. / Islam, M. N. / Mahmud, F. / Jamil, M.	Production of rice husk ash for use in concrete as a supplementary cementitious material	798-805
Al-Khateeb, Ghazi G. / Al-Akhras, Nabil M.	Properties of Portland cement-modified asphalt binder using Superpave tests	926-932
Shang, Lina / Wang, Shifeng / Zhang, Yong / Zhang, Yinxi	Pyrolyzed wax from recycled cross-linked polyethylene as warm mix asphalt (WMA) additive for SBS modified asphalt	886-891
Hadi, M. N. S.	Rehabilitating destructed reinforced concrete T connections by steel straps	851-858
Obaidat, Yasmeen Taleb / Heyden, Susanne / Dahlblom, Ola / Abu-Farsakh, Ghazi / Abdel-Jawad, Yahia	Retrofitting of reinforced concrete beams using composite laminates	591-597
Özen, Halit	Rutting evaluation of hydrated lime and SBS modified asphalt mixtures for laboratory and field compacted samples	756-765
Yang, Keun-Hyeok / Kim, Gwang-Hee / Yang, Hong-Suk	Shear behavior of continuous reinforced concrete T-beams using wire rope as internal shear reinforcement	911-918
Borri, A. / Castori, G. / Corradi, M.	Shear behavior of masonry panels strengthened by high strength steel cords	494-503
Taillade, Frédéric / Quiertant, Marc / Benzarti, Karim / Aubagnac, Christophe	Shearography and pulsed stimulated infrared thermography applied to a nondestructive evaluation of FRP strengthening systems bonded on concrete structures	568-574
Lanzón, Marcos / Garrido, A. / García-Ruiz, P. A.	Stabilization of sodium oleate as calcium oleate in cement-based mortars made with limestone fillers	1001-1008
Bhutta, Muhammad Aamer Rafique / Ohama, Yoshihiko / Tsuruta, Ken	Strength properties of polymer mortar panels using methyl methacrylate solution of waste expanded polystyrene as binder	779-784
Yang, Lin-hu / Han, Zhu / Li, Cheng-fang	Strengths and flexural strain of CRC specimens at low temperature	906-910
Bocci, M. / Grilli, A. / Cardone, F. / Graziani, A.	A study on the mechanical behaviour of cement–bitumen treated materials	773-778
Rosell-Lam, M. / Villar-Cociña, E. / Frías, M.	Study on the pozzolanic properties of a natural Cuban zeolitic rock by conductometric method: Kinetic parameters	644-650
Djouani, Fatma / Herbst, Frederic / Chehimi, Mohamed M. / Benzarti, Karim	Synthesis, characterization and reinforcing properties of novel, reactive clay/poly(glycidyl methacrylate) nanocomposites	424-431
Dai, Qingli	Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images	1102-1114
Park, Sung-Sik	Unconfined compressive strength and ductility of fiber-reinforced cemented sand	1134-1138
Chataigner, Sylvain / Caron, Jean-François / Benzarti, Karim / Quiertant, Marc / Aubagnac, Christophe	Use of a single lap shear test to characterize composite-to-concrete or composite-to-steel bonded interfaces	468-478
Kim, H. K. / Lee, H. K.	Use of power plant bottom ash as fine and coarse aggregates in high-strength concrete	1115-1122
Sevil, Tuğçe / Baran, Mehmet / Bilir, Turhan / Canbay, Erdem	Use of steel fiber reinforced mortar for seismic strengthening	892-899
Galvão, José Carlos Alves / Portella, Kleber Franke / Joukoski, Alex / Mendes, Roberto / Ferreira, Elizeu Santos	Use of waste polymers in concrete for repair of dam hydraulic surfaces	1049-1055
Fang, Yonghao / Gu, Yamin / Kang, Qiubo / Wen, Quan / Dai, Pin	Utilization of copper tailing for autoclaved sand–lime brick	867-872
Memon, Shazim Ali / Shaikh, Muhammad Ali / Akbar, Hassan	Utilization of Rice Husk Ash as viscosity modifying agent in Self Compacting Concrete	1044-1048
Collet, Florence / Achchaq, Fouzia / Djellab, Karim / Marmoret, Laurent / Beji, Hassen	Water vapor properties of two hemp wools manufactured with different treatments	1079-1085

Über diese
Datenseite
IssueID
22464
Veröffentlicht am:
16.12.2018
Geändert am:
16.12.2018

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - v. 25, n. 2 (Februar 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - v. 25, n. 2 (Februar 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.