Construction and Building Materials - v. 25, n. 1 (January 2011)

Published:	January 2011

Articles in this Issue

Author(s)	Title	Page(s)
Yoo, Jo-Hyeong / Lee, Han-Seung / Ismail, Mohamed A.	An analytical study on the water penetration and diffusion into concrete under water pressure	99-108
Chakradhara Rao, M. / Bhattacharyya, S. K. / Barai, S. V.	Behaviour of recycled aggregate concrete under drop weight impact load	69-80
Sajedi, Fathollah / Razak, Hashim Abdul	Comparison of different methods for activation of ordinary Portland cement-slag mortars	30-38
Yan, Z. / Pantelides, C. P.	Concrete column shape modification with FRP shells and expansive cement concrete	396-405
Zerbino, R. / Giaccio, G. / Isaia, G. C.	Concrete incorporating rice-husk ash without processing	371-378
Tomoto, Takashi / Moriyoshi, Akihiro / Takahashi, Hiroshi / Kitagawa, Hiromitsu / Tsunekawa, Masami	Damage to cement concrete pavements due to exposure to organic compounds in a cold region	267-281
Marques, J. A. / Lopes, J. G. / Correia, J. R.	Durability of the adhesion between bituminous coatings and self-protection mineral granules of waterproofing membranes	138-144
Zhu, Deju / Peled, Alva / Mobasher, Barzin	Dynamic tensile testing of fabric–cement composites	385-395
Goh, Shu Wei / Akin, Michelle / You, Zhanping / Shi, Xianming	Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixture	195-200
Maslehuddin, M. / Awan, F. R. / Shameem, M. / Ibrahim, M. / Ali, M. R.	Effect of electric arc furnace dust on the properties of OPC and blended cement concretes	308-312
Abu-Lebdeh, Taher / Hamoush, Sameer / Heard, William / Zornig, Brian	Effect of matrix strength on pullout behavior of steel fiber reinforced very-high strength concrete composites	39-46
Mazaheripour, H. / Ghanbarpour, S. / Mirmoradi, S. H. / Hosseinpour, I.	The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete	351-358
Ipek, Metin / Yilmaz, Kemalettin / Sümer, Mansur / Saribiyik, Mehmet	Effect of pre-setting pressure applied to mechanical behaviours of reactive powder concrete during setting phase	61-68
Senff, L. / Hotza, D. / Labrincha, J. A.	Effect of red mud addition on the rheological behaviour and on hardened state characteristics of cement mortars	163-170
Mohammed, A. / Hughes, T. G. / Mustapha, A.	The effect of scale on the structural behaviour of masonry under compression	303-307
Ba, Ming-fang / Qian, Chun-xiang / Guo, Xin-jun / Han, Xiang-yang	Effects of steam curing on strength and porous structure of concrete with low water/binder ratio	123-128
Zhang, Feng / Yu, Jianying / Han, Jun	Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts	129-137
Parande, A. K. / Ramesh Babu, B. / Pandi, K. / Karthikeyan, M. S. / Palaniswamy, N.	Environmental effects on concrete using Ordinary and Pozzolana Portland cement	288-297
Sisomphon, Kritsada / Franke, Lutz	Evaluation of calcium hydroxide contents in pozzolanic cement pastes by a chemical extraction method	190-194
Gonçalves, M. R. F. / Fillipeto, C. K. / Vicenzi, J. / Bergmann, C. P.	Evaluation of mechanical performance of cement matrix composites with dispersed phases used in substitution to asbestos	320-327
Ross, Brandon E. / Hamilton, H. R. (Trey)	Evaluation of strain gage lengths for testing limestone and granite aggregate concretes	406-408
Courard, Luc / Michel, Frédéric / Martin, Marie	The evaluation of the surface free energy of liquids and solids in concrete technology	260-266
Aras, F. / Krstevska, L. / Altay, G. / Tashkov, L.	Experimental and numerical modal analyses of a historical masonry palace	81-91
Hernández-Olivares, F. / Mayor-Lobo, P.	Experimental assessment of commercial one-coat renders for buildings façades	156-162
Ibrahim, Hassan Mohamed	Experimental investigation of ultimate capacity of wired mesh-reinforced cementitious slabs	251-259
Deng, Jun / Lee, Marcus M. K. / Li, Shiqing	Flexural strength of steel–concrete composite beams reinforced with a prestressed CFRP plate	379-384
Morsy, M. S. / Alsayed, S. H. / Aqel, M.	Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar	145-149
Meddah, Mohammed Seddik / Suzuki, Masahiro / Sato, Ryoichi	Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete	239-250
Beben, Damian / Manko, Zbigniew "Zee"	Influence of selected hydrophobic agents on some properties of autoclaving cellular concrete (ACC)	282-287
Leemann, Andreas / Lothenbach, Barbara / Thalmann, Cédric	Influence of superplasticizers on pore solution composition and on expansion of concrete due to alkali-silica reaction	344-350
Hazaree, Chetan / Ceylan, Halil / Wang, Kejin	Influences of mixture composition on properties and freeze–thaw resistance of RCC	313-319
Ahmed, Aly / Ugai, Keizo / Kamei, Takeshi	Investigation of recycled gypsum in conjunction with waste plastic trays for ground improvement	208-217
Horsakulthai, Veera / Phiuvanna, Santi / Kaenbud, Watcharase	Investigation on the corrosion resistance of bagasse-rice husk-wood ash blended cement concrete by impressed voltage	54-60
Jamshidi, M. / Ramezanianpour, A. A.	Laboratory and industrial investigations on hybrid of acrylic and glass short fibers as an alternative for substituting asbestos in Hatschek process	298-302
Apeagyei, Alex K.	Laboratory evaluation of antioxidants for asphalt binders	47-53
Gunasekaran, K. / Kumar, P. S. / Lakshmipathy, M.	Mechanical and bond properties of coconut shell concrete	92-98
Su, Yu / Wu, Chengqing / Griffth, Michael C.	Modelling of the bond–slip behavior in FRP reinforced masonry	328-334
Santilli, A. / Puente, I. / López, A.	Rates of placement discussion for the validation of experimental models of fresh concrete lateral pressure in walls	227-238
Yaqub, M. / Bailey, C. G.	Repair of fire damaged circular reinforced concrete columns with FRP composites	359-370
Kim, Hakseo / Lee, Soon-Jae / Amirkhanian, Serji N.	Rheology of warm mix asphalt binders with aged binders	183-189
Sasmal, Saptarshi / Ramanjaneyulu, K. / Novák, Balthasar / Srinivas, V. / Saravana Kumar, K. / Korkowski, Christian / Roehm, Constanze / Lakshmanan, N. / Iyer, Nagesh R.	Seismic retrofitting of nonductile beam-column sub-assemblage using FRP wrapping and steel plate jacketing	175-182
Hekal, Eisa E. / Hegazi, Wafaa S. / Kishar, Essam A. / Mohamed, Maha R.	Solidification/stabilization of Ni(II) by various cement pastes	109-114
Parra, C. / Valcuende, M. / Gómez, F.	Splitting tensile strength and modulus of elasticity of self-compacting concrete	201-207
Ai, Al-Hadidy / Yi-qiu, Tan / Hameed, Ayman Talib	Starch as a modifier for asphalt paving materials	14-20
Son, Ki Sang / Hajirasouliha, Iman / Pilakoutas, Kypros	Strength and deformability of waste tyre rubber-filled reinforced concrete columns	218-226
Shirodkar, Prashant / Mehta, Yusuf / Nolan, Aaron / Sonpal, Khyati / Norton, Alan / Tomlinson, Chris / Dubois, Eric / Sullivan, Patrick / Sauber, Robert	A study to determine the degree of partial blending of reclaimed asphalt pavement (RAP) binder for high RAP hot mix asphalt	150-155
Craeye, Bart / Geirnaert, Matthew / De Schutter, Geert	Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks	1-13
Lam dos Santos, J. P. / Rosa, L. G. / Amaral, P. M.	Temperature effects on mechanical behaviour of engineered stones	171-174
Martinez-Ramirez, S. / Blanco-Varela, M. T. / Rapazote, J.	Thaumasite formation in sugary solutions: Effect of temperature and sucrose concentration	21-29
Sivilevičius, Henrikas / Podvezko, Valentinas / Vakrinienė, Sigutė	The use of constrained and unconstrained optimization models in gradation design of hot mix asphalt mixture	115-122
Liu, Xuemei / Chia, Kok Seng / Zhang, Min-Hong	Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete	335-343

About this
data sheet
IssueID
22463
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 25, n. 1 (January 2011)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 25, n. 1 (January 2011)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.