Construction and Building Materials - v. 25, n. 1 (Januar 2011)

Erschienen:	Januar 2011

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Yoo, Jo-Hyeong / Lee, Han-Seung / Ismail, Mohamed A.	An analytical study on the water penetration and diffusion into concrete under water pressure	99-108
Chakradhara Rao, M. / Bhattacharyya, S. K. / Barai, S. V.	Behaviour of recycled aggregate concrete under drop weight impact load	69-80
Sajedi, Fathollah / Razak, Hashim Abdul	Comparison of different methods for activation of ordinary Portland cement-slag mortars	30-38
Yan, Z. / Pantelides, C. P.	Concrete column shape modification with FRP shells and expansive cement concrete	396-405
Zerbino, R. / Giaccio, G. / Isaia, G. C.	Concrete incorporating rice-husk ash without processing	371-378
Tomoto, Takashi / Moriyoshi, Akihiro / Takahashi, Hiroshi / Kitagawa, Hiromitsu / Tsunekawa, Masami	Damage to cement concrete pavements due to exposure to organic compounds in a cold region	267-281
Marques, J. A. / Lopes, J. G. / Correia, J. R.	Durability of the adhesion between bituminous coatings and self-protection mineral granules of waterproofing membranes	138-144
Zhu, Deju / Peled, Alva / Mobasher, Barzin	Dynamic tensile testing of fabric–cement composites	385-395
Goh, Shu Wei / Akin, Michelle / You, Zhanping / Shi, Xianming	Effect of deicing solutions on the tensile strength of micro- or nano-modified asphalt mixture	195-200
Maslehuddin, M. / Awan, F. R. / Shameem, M. / Ibrahim, M. / Ali, M. R.	Effect of electric arc furnace dust on the properties of OPC and blended cement concretes	308-312
Abu-Lebdeh, Taher / Hamoush, Sameer / Heard, William / Zornig, Brian	Effect of matrix strength on pullout behavior of steel fiber reinforced very-high strength concrete composites	39-46
Mazaheripour, H. / Ghanbarpour, S. / Mirmoradi, S. H. / Hosseinpour, I.	The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete	351-358
Ipek, Metin / Yilmaz, Kemalettin / Sümer, Mansur / Saribiyik, Mehmet	Effect of pre-setting pressure applied to mechanical behaviours of reactive powder concrete during setting phase	61-68
Senff, L. / Hotza, D. / Labrincha, J. A.	Effect of red mud addition on the rheological behaviour and on hardened state characteristics of cement mortars	163-170
Mohammed, A. / Hughes, T. G. / Mustapha, A.	The effect of scale on the structural behaviour of masonry under compression	303-307
Ba, Ming-fang / Qian, Chun-xiang / Guo, Xin-jun / Han, Xiang-yang	Effects of steam curing on strength and porous structure of concrete with low water/binder ratio	123-128
Zhang, Feng / Yu, Jianying / Han, Jun	Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS- and SBS/sulfur-modified asphalts	129-137
Parande, A. K. / Ramesh Babu, B. / Pandi, K. / Karthikeyan, M. S. / Palaniswamy, N.	Environmental effects on concrete using Ordinary and Pozzolana Portland cement	288-297
Sisomphon, Kritsada / Franke, Lutz	Evaluation of calcium hydroxide contents in pozzolanic cement pastes by a chemical extraction method	190-194
Gonçalves, M. R. F. / Fillipeto, C. K. / Vicenzi, J. / Bergmann, C. P.	Evaluation of mechanical performance of cement matrix composites with dispersed phases used in substitution to asbestos	320-327
Ross, Brandon E. / Hamilton, H. R. (Trey)	Evaluation of strain gage lengths for testing limestone and granite aggregate concretes	406-408
Courard, Luc / Michel, Frédéric / Martin, Marie	The evaluation of the surface free energy of liquids and solids in concrete technology	260-266
Aras, F. / Krstevska, L. / Altay, G. / Tashkov, L.	Experimental and numerical modal analyses of a historical masonry palace	81-91
Hernández-Olivares, F. / Mayor-Lobo, P.	Experimental assessment of commercial one-coat renders for buildings façades	156-162
Ibrahim, Hassan Mohamed	Experimental investigation of ultimate capacity of wired mesh-reinforced cementitious slabs	251-259
Deng, Jun / Lee, Marcus M. K. / Li, Shiqing	Flexural strength of steel–concrete composite beams reinforced with a prestressed CFRP plate	379-384
Morsy, M. S. / Alsayed, S. H. / Aqel, M.	Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar	145-149
Meddah, Mohammed Seddik / Suzuki, Masahiro / Sato, Ryoichi	Influence of a combination of expansive and shrinkage-reducing admixture on autogenous deformation and self-stress of silica fume high-performance concrete	239-250
Beben, Damian / Manko, Zbigniew "Zee"	Influence of selected hydrophobic agents on some properties of autoclaving cellular concrete (ACC)	282-287
Leemann, Andreas / Lothenbach, Barbara / Thalmann, Cédric	Influence of superplasticizers on pore solution composition and on expansion of concrete due to alkali-silica reaction	344-350
Hazaree, Chetan / Ceylan, Halil / Wang, Kejin	Influences of mixture composition on properties and freeze–thaw resistance of RCC	313-319
Ahmed, Aly / Ugai, Keizo / Kamei, Takeshi	Investigation of recycled gypsum in conjunction with waste plastic trays for ground improvement	208-217
Horsakulthai, Veera / Phiuvanna, Santi / Kaenbud, Watcharase	Investigation on the corrosion resistance of bagasse-rice husk-wood ash blended cement concrete by impressed voltage	54-60
Jamshidi, M. / Ramezanianpour, A. A.	Laboratory and industrial investigations on hybrid of acrylic and glass short fibers as an alternative for substituting asbestos in Hatschek process	298-302
Apeagyei, Alex K.	Laboratory evaluation of antioxidants for asphalt binders	47-53
Gunasekaran, K. / Kumar, P. S. / Lakshmipathy, M.	Mechanical and bond properties of coconut shell concrete	92-98
Su, Yu / Wu, Chengqing / Griffth, Michael C.	Modelling of the bond–slip behavior in FRP reinforced masonry	328-334
Santilli, A. / Puente, I. / López, A.	Rates of placement discussion for the validation of experimental models of fresh concrete lateral pressure in walls	227-238
Yaqub, M. / Bailey, C. G.	Repair of fire damaged circular reinforced concrete columns with FRP composites	359-370
Kim, Hakseo / Lee, Soon-Jae / Amirkhanian, Serji N.	Rheology of warm mix asphalt binders with aged binders	183-189
Sasmal, Saptarshi / Ramanjaneyulu, K. / Novák, Balthasar / Srinivas, V. / Saravana Kumar, K. / Korkowski, Christian / Roehm, Constanze / Lakshmanan, N. / Iyer, Nagesh R.	Seismic retrofitting of nonductile beam-column sub-assemblage using FRP wrapping and steel plate jacketing	175-182
Hekal, Eisa E. / Hegazi, Wafaa S. / Kishar, Essam A. / Mohamed, Maha R.	Solidification/stabilization of Ni(II) by various cement pastes	109-114
Parra, C. / Valcuende, M. / Gómez, F.	Splitting tensile strength and modulus of elasticity of self-compacting concrete	201-207
Ai, Al-Hadidy / Yi-qiu, Tan / Hameed, Ayman Talib	Starch as a modifier for asphalt paving materials	14-20
Son, Ki Sang / Hajirasouliha, Iman / Pilakoutas, Kypros	Strength and deformability of waste tyre rubber-filled reinforced concrete columns	218-226
Shirodkar, Prashant / Mehta, Yusuf / Nolan, Aaron / Sonpal, Khyati / Norton, Alan / Tomlinson, Chris / Dubois, Eric / Sullivan, Patrick / Sauber, Robert	A study to determine the degree of partial blending of reclaimed asphalt pavement (RAP) binder for high RAP hot mix asphalt	150-155
Craeye, Bart / Geirnaert, Matthew / De Schutter, Geert	Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks	1-13
Lam dos Santos, J. P. / Rosa, L. G. / Amaral, P. M.	Temperature effects on mechanical behaviour of engineered stones	171-174
Martinez-Ramirez, S. / Blanco-Varela, M. T. / Rapazote, J.	Thaumasite formation in sugary solutions: Effect of temperature and sucrose concentration	21-29
Sivilevičius, Henrikas / Podvezko, Valentinas / Vakrinienė, Sigutė	The use of constrained and unconstrained optimization models in gradation design of hot mix asphalt mixture	115-122
Liu, Xuemei / Chia, Kok Seng / Zhang, Min-Hong	Water absorption, permeability, and resistance to chloride-ion penetration of lightweight aggregate concrete	335-343

Über diese
Datenseite
IssueID
22463
Veröffentlicht am:
16.12.2018
Geändert am:
16.12.2018

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - v. 25, n. 1 (Januar 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - v. 25, n. 1 (Januar 2011)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.