Construction and Building Materials - v. 23, n. 6 (June 2009)

Published:	June 2009

Articles in this Issue

Author(s)	Title	Page(s)
Wang, S. Y. / Sun, L. / Au, A. S. K. / Yang, T. H. / Tang, C. A.	2D-numerical analysis of hydraulic fracturing in heterogeneous geo-materials	2196-2206
Alenka, Mauko / Tadeja, Muck / Ana, Mladenovič	3D visualization and quantification of bowing marble microstructure	2380-2385
Giergiczny, Zbigniew / Glinicki, Michal A. / Sokołowski, Marcin / Zielinski, Marek	Air void system and frost-salt scaling of concrete containing slag-blended cement	2451-2456
Adam, José M. / Ivorra, Salvador / Pallarés, Francisco J. / Giménez, Ester / Calderón, Pedro A.	Axially loaded RC columns strengthened by steel caging. Finite element modelling	2265-2276
Shi, Hui-sheng / Kan, Li-li	Characteristics of municipal solid wastes incineration (MSWI) fly ash–cement matrices and effect of mineral admixtures on composite system	2160-2166
Lee, Soon-Jae / Amirkhanian, Serji N. / Park, Nam-Won / Kim, Kwang W.	Characterization of warm mix asphalt binders containing artificially long-term aged binders	2371-2379
Issa, Camille A. / Chami, Pedro / Saad, George	Compressive strength of concrete cylinders with variable widths CFRP wraps: Experimental study and numerical modeling	2306-2318
Sales, Almir / de Souza, Francis Rodrigues	Concretes and mortars recycled with water treatment sludge and construction and demolition rubble	2362-2370
Fouchal, Fazia / Lebon, Frédéric / Titeux, Isabelle	Contribution to the modelling of interfaces in masonry construction	2428-2441
Xu, Jing / Yao, Wu	Current distribution in reinforced concrete cathodic protection system with conductive mortar overlay anode	2220-2226
Rodgers, M. / Hayes, G. / Healy, M. G.	Cyclic loading tests on sandstone and limestone shale aggregates used in unbound forest roads	2421-2427
Filho, Romildo Dias Toledo / de Andrade Silva, Flávio / Fairbairn, E. M. R. / de Almeida Melo Filho, João	Durability of compression molded sisal fiber reinforced mortar laminates	2409-2420
Wang, Her-Yung	Durability of self-consolidating lightweight aggregate concrete using dredged silt	2332-2337
Yang, Zhengxian / Shi, Xianming / Creighton, Andrew T. / Peterson, Marijean M.	Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar	2283-2290
Kim, Yong-Rak / Park, Hee Mun / Sacramento Aragão, Francisco Thiago / Sudo Lutif, Jamilla Emi	Effects of aggregate structure on hot-mix asphalt rutting performance in low traffic volume local pavements	2177-2182
Aydın, Serdar / Hilmi Aytaç, A. / Ramyar, Kambiz	Effects of fineness of cement on polynaphthalene sulfonate based superplasticizer–cement interaction	2402-2408
Liuquan, Quan / Dongxu, Li / Zongjin, Li	Effects of lignin cellulose and expansive agent on microstructure and macro-property of polymer-modified mortar containing fly ash	2467-2471
Jahromi, Saeed Ghaffarpour	Estimation of resistance to moisture destruction in asphalt mixtures	2324-2331
Vejmelková, Eva / Pavlíková, Milena / Keršner, Zbynĕk / Rovnaníková, Pavla / Ondráček, Michal / Sedlmajer, Martin / Černý, Robert	High performance concrete containing lower slag amount: A complex view of mechanical and durability properties	2237-2245
Yang, S. L. / Millard, S. G. / Soutsos, M. N. / Barnett, S. J. / Le, T. T.	Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC)	2291-2298
Li, Li-Juan / Guo, Yong-Chang / Huang, Pei-yan / Liu, Feng / Deng, Jun / Zhu, Jiang	Interfacial stress analysis of RC beams strengthened with hybrid CFS and GFS	2394-2401
Jianying, Yu / Peiliang, Cong / Shaopeng, Wu	Investigation of the properties of asphalt and its mixtures containing flame retardant modifier	2277-2282
Khanzadi, Mostafa / Behnood, Ali	Mechanical properties of high-strength concrete incorporating copper slag as coarse aggregate	2183-2188
Pipilikaki, P. / Papageorgiou, D. / Dimitroula, M. / Chaniotakis, E. / Katsioti, M.	Microstructure changes in mortars attacked by sulphates at 5°C	2259-2264
Yuan, Yingshu / Ji, Yongsheng	Modeling corroded section configuration of steel bar in concrete structure	2461-2466
Alshihri, Marai M. / Azmy, Ahmed M. / El-Bisy, Mousa S.	Neural networks for predicting compressive strength of structural light weight concrete	2214-2219
Pradhan, Bulu / Bhattacharjee, B.	Performance evaluation of rebar in chloride contaminated concrete by corrosion rate	2346-2356
Al-Jabri, Khalifa S. / Hisada, Makoto / Al-Saidy, Abdullah H. / Al-Oraimi, S. K.	Performance of high strength concrete made with copper slag as a fine aggregate	2132-2140
Ashraf, M. / Naeem Khan, A. / Ali, Qasair / Mirza, J. / Goyal, A. / Anwar, A. M.	Physico-chemical, morphological and thermal analysis for the combined pozzolanic activities of minerals additives	2207-2213
Gorkem, Cagri / Sengoz, Burak	Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime	2227-2236
Maslehuddin, M. / Al-Amoudi, O. S. B. / Rahman, M. K. / Ali, M. R. / Barry, M. S.	Properties of cement kiln dust concrete	2357-2361
Billong, Ndigui / Melo, U. C. / Louvet, F. / Njopwouo, D.	Properties of compressed lateritic soil stabilized with a burnt clay–lime binder: Effect of mixture components	2457-2460
Björk, Folke / Enochsson, Tomas	Properties of thermal insulation materials during extreme environment changes	2189-2195
Aflaki, Sassan / Tabatabaee, Nader	Proposals for modification of Iranian bitumen to meet the climatic requirements of Iran	2141-2150
Kim, Sumin	The reduction of indoor air pollutant from wood-based composite by adding pozzolan for building materials	2319-2323
Collop, A. C. / Sutanto, M. H. / Airey, G. D. / Elliott, R. C.	Shear bond strength between asphalt layers for laboratory prepared samples and field cores	2251-2258
Bera, Ashis Kumar / Ghosh, Ambarish / Ghosh, Amalendu	Shear strength response of reinforced pond ash	2386-2393
Sáez-Pérez, M. P. / Rodríguez-Gordillo, J.	Structural and compositional anisotropy in Macael marble (Spain) by ultrasonic, XRD and optical microscopy methods	2121-2126
Her-Yung, Wang	A study of the engineering properties of waste LCD glass applied to controlled low strength materials concrete	2127-2131
Pipilikaki, P. / Katsioti, M.	Study of the hydration process of quaternary blended cements and durability of the produced mortars and concretes	2246-2250
Skaropoulou, A. / Tsivilis, S. / Kakali, G. / Sharp, J. H. / Swamy, R. N.	Thaumasite form of sulfate attack in limestone cement mortars: A study on long term efficiency of mineral admixtures	2338-2345
Ferrero, Anna Maria / Migliazza, Maria / Spagnoli, Andrea	Theoretical modelling of bowing in cracked marble slabs under cyclic thermal loading	2151-2159
Krüger, E. L. / Adriazola, M. / Matoski, A. / Iwakiri, S.	Thermal analysis of wood–cement panels: Heat flux and indoor temperature measurements in test cells	2299-2305
Uğurlu, Elif / Böke, Hasan	The use of brick–lime plasters and their relevance to climatic conditions of historic bath buildings	2442-2450
Gharighoran, Alireza / Daneshjoo, Farhad / Khaji, Naser	Use of Ritz method for damage detection of reinforced and post-tensioned concrete beams	2167-2176

About this
data sheet
IssueID
22434
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 23, n. 6 (June 2009)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 23, n. 6 (June 2009)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.