Construction and Building Materials - v. 23, n. 6 (juin 2009)

Publié:	juin 2009

Auteur(s)	Titre	Page(s)
Wang, S. Y. / Sun, L. / Au, A. S. K. / Yang, T. H. / Tang, C. A.	2D-numerical analysis of hydraulic fracturing in heterogeneous geo-materials	2196-2206
Alenka, Mauko / Tadeja, Muck / Ana, Mladenovič	3D visualization and quantification of bowing marble microstructure	2380-2385
Giergiczny, Zbigniew / Glinicki, Michal A. / Sokołowski, Marcin / Zielinski, Marek	Air void system and frost-salt scaling of concrete containing slag-blended cement	2451-2456
Adam, José M. / Ivorra, Salvador / Pallarés, Francisco J. / Giménez, Ester / Calderón, Pedro A.	Axially loaded RC columns strengthened by steel caging. Finite element modelling	2265-2276
Shi, Hui-sheng / Kan, Li-li	Characteristics of municipal solid wastes incineration (MSWI) fly ash–cement matrices and effect of mineral admixtures on composite system	2160-2166
Lee, Soon-Jae / Amirkhanian, Serji N. / Park, Nam-Won / Kim, Kwang W.	Characterization of warm mix asphalt binders containing artificially long-term aged binders	2371-2379
Issa, Camille A. / Chami, Pedro / Saad, George	Compressive strength of concrete cylinders with variable widths CFRP wraps: Experimental study and numerical modeling	2306-2318
Sales, Almir / de Souza, Francis Rodrigues	Concretes and mortars recycled with water treatment sludge and construction and demolition rubble	2362-2370
Fouchal, Fazia / Lebon, Frédéric / Titeux, Isabelle	Contribution to the modelling of interfaces in masonry construction	2428-2441
Xu, Jing / Yao, Wu	Current distribution in reinforced concrete cathodic protection system with conductive mortar overlay anode	2220-2226
Rodgers, M. / Hayes, G. / Healy, M. G.	Cyclic loading tests on sandstone and limestone shale aggregates used in unbound forest roads	2421-2427
Filho, Romildo Dias Toledo / de Andrade Silva, Flávio / Fairbairn, E. M. R. / de Almeida Melo Filho, João	Durability of compression molded sisal fiber reinforced mortar laminates	2409-2420
Wang, Her-Yung	Durability of self-consolidating lightweight aggregate concrete using dredged silt	2332-2337
Yang, Zhengxian / Shi, Xianming / Creighton, Andrew T. / Peterson, Marijean M.	Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar	2283-2290
Kim, Yong-Rak / Park, Hee Mun / Sacramento Aragão, Francisco Thiago / Sudo Lutif, Jamilla Emi	Effects of aggregate structure on hot-mix asphalt rutting performance in low traffic volume local pavements	2177-2182
Aydın, Serdar / Hilmi Aytaç, A. / Ramyar, Kambiz	Effects of fineness of cement on polynaphthalene sulfonate based superplasticizer–cement interaction	2402-2408
Liuquan, Quan / Dongxu, Li / Zongjin, Li	Effects of lignin cellulose and expansive agent on microstructure and macro-property of polymer-modified mortar containing fly ash	2467-2471
Jahromi, Saeed Ghaffarpour	Estimation of resistance to moisture destruction in asphalt mixtures	2324-2331
Vejmelková, Eva / Pavlíková, Milena / Keršner, Zbynĕk / Rovnaníková, Pavla / Ondráček, Michal / Sedlmajer, Martin / Černý, Robert	High performance concrete containing lower slag amount: A complex view of mechanical and durability properties	2237-2245
Yang, S. L. / Millard, S. G. / Soutsos, M. N. / Barnett, S. J. / Le, T. T.	Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC)	2291-2298
Li, Li-Juan / Guo, Yong-Chang / Huang, Pei-yan / Liu, Feng / Deng, Jun / Zhu, Jiang	Interfacial stress analysis of RC beams strengthened with hybrid CFS and GFS	2394-2401
Jianying, Yu / Peiliang, Cong / Shaopeng, Wu	Investigation of the properties of asphalt and its mixtures containing flame retardant modifier	2277-2282
Khanzadi, Mostafa / Behnood, Ali	Mechanical properties of high-strength concrete incorporating copper slag as coarse aggregate	2183-2188
Pipilikaki, P. / Papageorgiou, D. / Dimitroula, M. / Chaniotakis, E. / Katsioti, M.	Microstructure changes in mortars attacked by sulphates at 5°C	2259-2264
Yuan, Yingshu / Ji, Yongsheng	Modeling corroded section configuration of steel bar in concrete structure	2461-2466
Alshihri, Marai M. / Azmy, Ahmed M. / El-Bisy, Mousa S.	Neural networks for predicting compressive strength of structural light weight concrete	2214-2219
Pradhan, Bulu / Bhattacharjee, B.	Performance evaluation of rebar in chloride contaminated concrete by corrosion rate	2346-2356
Al-Jabri, Khalifa S. / Hisada, Makoto / Al-Saidy, Abdullah H. / Al-Oraimi, S. K.	Performance of high strength concrete made with copper slag as a fine aggregate	2132-2140
Ashraf, M. / Naeem Khan, A. / Ali, Qasair / Mirza, J. / Goyal, A. / Anwar, A. M.	Physico-chemical, morphological and thermal analysis for the combined pozzolanic activities of minerals additives	2207-2213
Gorkem, Cagri / Sengoz, Burak	Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime	2227-2236
Maslehuddin, M. / Al-Amoudi, O. S. B. / Rahman, M. K. / Ali, M. R. / Barry, M. S.	Properties of cement kiln dust concrete	2357-2361
Billong, Ndigui / Melo, U. C. / Louvet, F. / Njopwouo, D.	Properties of compressed lateritic soil stabilized with a burnt clay–lime binder: Effect of mixture components	2457-2460
Björk, Folke / Enochsson, Tomas	Properties of thermal insulation materials during extreme environment changes	2189-2195
Aflaki, Sassan / Tabatabaee, Nader	Proposals for modification of Iranian bitumen to meet the climatic requirements of Iran	2141-2150
Kim, Sumin	The reduction of indoor air pollutant from wood-based composite by adding pozzolan for building materials	2319-2323
Collop, A. C. / Sutanto, M. H. / Airey, G. D. / Elliott, R. C.	Shear bond strength between asphalt layers for laboratory prepared samples and field cores	2251-2258
Bera, Ashis Kumar / Ghosh, Ambarish / Ghosh, Amalendu	Shear strength response of reinforced pond ash	2386-2393
Sáez-Pérez, M. P. / Rodríguez-Gordillo, J.	Structural and compositional anisotropy in Macael marble (Spain) by ultrasonic, XRD and optical microscopy methods	2121-2126
Her-Yung, Wang	A study of the engineering properties of waste LCD glass applied to controlled low strength materials concrete	2127-2131
Pipilikaki, P. / Katsioti, M.	Study of the hydration process of quaternary blended cements and durability of the produced mortars and concretes	2246-2250
Skaropoulou, A. / Tsivilis, S. / Kakali, G. / Sharp, J. H. / Swamy, R. N.	Thaumasite form of sulfate attack in limestone cement mortars: A study on long term efficiency of mineral admixtures	2338-2345
Ferrero, Anna Maria / Migliazza, Maria / Spagnoli, Andrea	Theoretical modelling of bowing in cracked marble slabs under cyclic thermal loading	2151-2159
Krüger, E. L. / Adriazola, M. / Matoski, A. / Iwakiri, S.	Thermal analysis of wood–cement panels: Heat flux and indoor temperature measurements in test cells	2299-2305
Uğurlu, Elif / Böke, Hasan	The use of brick–lime plasters and their relevance to climatic conditions of historic bath buildings	2442-2450
Gharighoran, Alireza / Daneshjoo, Farhad / Khaji, Naser	Use of Ritz method for damage detection of reinforced and post-tensioned concrete beams	2167-2176

Auteur(s)

Titre

Page(s)

Wang, S. Y. / Sun, L. / Au, A. S. K. / Yang, T. H. / Tang, C. A.

2D-numerical analysis of hydraulic fracturing in heterogeneous geo-materials

2196-2206

Alenka, Mauko / Tadeja, Muck / Ana, Mladenovič

3D visualization and quantification of bowing marble microstructure

2380-2385

Giergiczny, Zbigniew / Glinicki, Michal A. / Sokołowski, Marcin / Zielinski, Marek

Air void system and frost-salt scaling of concrete containing slag-blended cement

2451-2456

Adam, José M. / Ivorra, Salvador / Pallarés, Francisco J. / Giménez, Ester / Calderón, Pedro A.

Axially loaded RC columns strengthened by steel caging. Finite element modelling

2265-2276

Shi, Hui-sheng / Kan, Li-li

Characteristics of municipal solid wastes incineration (MSWI) fly ash–cement matrices and effect of mineral admixtures on composite system

2160-2166

Lee, Soon-Jae / Amirkhanian, Serji N. / Park, Nam-Won / Kim, Kwang W.

Characterization of warm mix asphalt binders containing artificially long-term aged binders

2371-2379

Issa, Camille A. / Chami, Pedro / Saad, George

Compressive strength of concrete cylinders with variable widths CFRP wraps: Experimental study and numerical modeling

2306-2318

Sales, Almir / de Souza, Francis Rodrigues

Concretes and mortars recycled with water treatment sludge and construction and demolition rubble

2362-2370

Fouchal, Fazia / Lebon, Frédéric / Titeux, Isabelle

Contribution to the modelling of interfaces in masonry construction

2428-2441

Xu, Jing / Yao, Wu

Current distribution in reinforced concrete cathodic protection system with conductive mortar overlay anode

2220-2226

Rodgers, M. / Hayes, G. / Healy, M. G.

Cyclic loading tests on sandstone and limestone shale aggregates used in unbound forest roads

2421-2427

Filho, Romildo Dias Toledo / de Andrade Silva, Flávio / Fairbairn, E. M. R. / de Almeida Melo Filho, João

Durability of compression molded sisal fiber reinforced mortar laminates

2409-2420

Wang, Her-Yung

Durability of self-consolidating lightweight aggregate concrete using dredged silt

2332-2337

Yang, Zhengxian / Shi, Xianming / Creighton, Andrew T. / Peterson, Marijean M.

Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar

2283-2290

Kim, Yong-Rak / Park, Hee Mun / Sacramento Aragão, Francisco Thiago / Sudo Lutif, Jamilla Emi

Effects of aggregate structure on hot-mix asphalt rutting performance in low traffic volume local pavements

2177-2182

Aydın, Serdar / Hilmi Aytaç, A. / Ramyar, Kambiz

Effects of fineness of cement on polynaphthalene sulfonate based superplasticizer–cement interaction

2402-2408

Liuquan, Quan / Dongxu, Li / Zongjin, Li

Effects of lignin cellulose and expansive agent on microstructure and macro-property of polymer-modified mortar containing fly ash

2467-2471

Jahromi, Saeed Ghaffarpour

Estimation of resistance to moisture destruction in asphalt mixtures

2324-2331

Vejmelková, Eva / Pavlíková, Milena / Keršner, Zbynĕk / Rovnaníková, Pavla / Ondráček, Michal / Sedlmajer, Martin / Černý, Robert

High performance concrete containing lower slag amount: A complex view of mechanical and durability properties

2237-2245

Yang, S. L. / Millard, S. G. / Soutsos, M. N. / Barnett, S. J. / Le, T. T.

Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC)

2291-2298

Li, Li-Juan / Guo, Yong-Chang / Huang, Pei-yan / Liu, Feng / Deng, Jun / Zhu, Jiang

Interfacial stress analysis of RC beams strengthened with hybrid CFS and GFS

2394-2401

Jianying, Yu / Peiliang, Cong / Shaopeng, Wu

Investigation of the properties of asphalt and its mixtures containing flame retardant modifier

2277-2282

Khanzadi, Mostafa / Behnood, Ali

Mechanical properties of high-strength concrete incorporating copper slag as coarse aggregate

2183-2188

Pipilikaki, P. / Papageorgiou, D. / Dimitroula, M. / Chaniotakis, E. / Katsioti, M.

Microstructure changes in mortars attacked by sulphates at 5°C

2259-2264

Yuan, Yingshu / Ji, Yongsheng

Modeling corroded section configuration of steel bar in concrete structure

2461-2466

Alshihri, Marai M. / Azmy, Ahmed M. / El-Bisy, Mousa S.

Neural networks for predicting compressive strength of structural light weight concrete

2214-2219

Pradhan, Bulu / Bhattacharjee, B.

Performance evaluation of rebar in chloride contaminated concrete by corrosion rate

2346-2356

Al-Jabri, Khalifa S. / Hisada, Makoto / Al-Saidy, Abdullah H. / Al-Oraimi, S. K.

Performance of high strength concrete made with copper slag as a fine aggregate

2132-2140

Ashraf, M. / Naeem Khan, A. / Ali, Qasair / Mirza, J. / Goyal, A. / Anwar, A. M.

Physico-chemical, morphological and thermal analysis for the combined pozzolanic activities of minerals additives

2207-2213

Gorkem, Cagri / Sengoz, Burak

Predicting stripping and moisture induced damage of asphalt concrete prepared with polymer modified bitumen and hydrated lime

2227-2236

Maslehuddin, M. / Al-Amoudi, O. S. B. / Rahman, M. K. / Ali, M. R. / Barry, M. S.

Properties of cement kiln dust concrete

2357-2361

Billong, Ndigui / Melo, U. C. / Louvet, F. / Njopwouo, D.

Properties of compressed lateritic soil stabilized with a burnt clay–lime binder: Effect of mixture components

2457-2460

Björk, Folke / Enochsson, Tomas

Properties of thermal insulation materials during extreme environment changes

2189-2195

Aflaki, Sassan / Tabatabaee, Nader

Proposals for modification of Iranian bitumen to meet the climatic requirements of Iran

2141-2150

Kim, Sumin

The reduction of indoor air pollutant from wood-based composite by adding pozzolan for building materials

2319-2323

Collop, A. C. / Sutanto, M. H. / Airey, G. D. / Elliott, R. C.

Shear bond strength between asphalt layers for laboratory prepared samples and field cores

2251-2258

Bera, Ashis Kumar / Ghosh, Ambarish / Ghosh, Amalendu

Shear strength response of reinforced pond ash

2386-2393

Sáez-Pérez, M. P. / Rodríguez-Gordillo, J.

Structural and compositional anisotropy in Macael marble (Spain) by ultrasonic, XRD and optical microscopy methods

2121-2126

Her-Yung, Wang

A study of the engineering properties of waste LCD glass applied to controlled low strength materials concrete

2127-2131

Pipilikaki, P. / Katsioti, M.

Study of the hydration process of quaternary blended cements and durability of the produced mortars and concretes

2246-2250

Skaropoulou, A. / Tsivilis, S. / Kakali, G. / Sharp, J. H. / Swamy, R. N.

Thaumasite form of sulfate attack in limestone cement mortars: A study on long term efficiency of mineral admixtures

2338-2345

Ferrero, Anna Maria / Migliazza, Maria / Spagnoli, Andrea

Theoretical modelling of bowing in cracked marble slabs under cyclic thermal loading

2151-2159

Krüger, E. L. / Adriazola, M. / Matoski, A. / Iwakiri, S.

Thermal analysis of wood–cement panels: Heat flux and indoor temperature measurements in test cells

2299-2305

Uğurlu, Elif / Böke, Hasan

The use of brick–lime plasters and their relevance to climatic conditions of historic bath buildings

2442-2450

Gharighoran, Alireza / Daneshjoo, Farhad / Khaji, Naser

Use of Ritz method for damage detection of reinforced and post-tensioned concrete beams

2167-2176

Publicité

Construction and Building Materials - v. 23, n. 6 (juin 2009)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - v. 23, n. 6 (juin 2009)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.