Construction and Building Materials - v. 23, n. 2 (February 2009)

Published:	February 2009

Articles in this Issue

Author(s)	Title	Page(s)
Seabra, M. P. / Paiva, H. / Labrincha, J. A. / Ferreira, V. M.	Admixtures effect on fresh state properties of aerial lime based mortars	1147-1153
Giancaspro, James / Papakonstantinou, Christos / Nazier, Mohamed / Balaguru, P.	Aerospace technology for strengthening of bridges	748-757
Parichatprecha, R. / Nimityongskul, P.	Analysis of durability of high performance concrete using artificial neural networks	910-917
Shin, Sung Woo / Oh, Tae Keun	Application of electro-mechanical impedance sensing technique for online monitoring of strength development in concrete using smart PZT patches	1185-1188
Rivard, Patrice / Saint-Pierre, François	Assessing alkali-silica reaction damage to concrete with non-destructive methods: From the lab to the field	902-909
Ransinchung, G. D. / Kumar, Brind / Kumar, Veerendra	Assessment of water absorption and chloride ion penetration of pavement quality concrete admixed with wollastonite and microsilica	1168-1177
Hadi, Muhammad N. S.	Behaviour of eccentric loading of FRP confined fibre steel reinforced concrete columns	1102-1108
Maranhão, Flavio L. / John, Vanderley M.	Bond strength and transversal deformation aging on cement-polymer adhesive mortar	1022-1027
Hao, Qingduo / Wang, Yanlei / He, Zheng / Ou, Jinping	Bond strength of glass fiber reinforced polymer ribbed rebars in normal strength concrete	865-871
Limbachiya, Mukesh C.	Bulk engineering and durability properties of washed glass sand concrete	1078-1083
Silvestre, José Dinis / de Brito, Jorge	Ceramic tiling inspection system	653-668
Lecomte-nana, G. L. / Lesueur, E. / Bonnet, J. P. / Lecomte, G.	Characterization of a lateritic geomaterial and its elaboration through a chemical route	1126-1132
Fajardo, G. / Valdez, P. / Pacheco, J.	Corrosion of steel rebar embedded in natural pozzolan based mortars exposed to chlorides	768-774
Qin, Menghao / Belarbi, Rafik / Aït-Mokhtar, Abdelkarim / Nilsson, Lars-Olof	Coupled heat and moisture transfer in multi-layer building materials	967-975
Lopez-Arce, P. / Garcia-Guinea, J. / Benavente, D. / Tormo, L. / Doehne, E.	Deterioration of dolostone by magnesium sulphate salt: An example of incompatible building materials at Bonaval Monastery, Spain	846-855
Kuisma, R. / Kymäläinen, H.-R. / Sjöberg, A.-M.	Determination of cleanability and wearing of plastic flooring surfaces in field and laboratory conditions	1093-1101
Tongaroonsri, Sontaya / Tangtermsirikul, Somnuk	Effect of mineral admixtures and curing periods on shrinkage and cracking age under restrained condition	1050-1056
Ang, C. N. / Wang, Y. C.	Effect of moisture transfer on specific heat of gypsum plasterboard at high temperatures	675-686
Ganjian, Eshmaiel / Pouya, Homayoon Sadeghi	The effect of Persian Gulf tidal zone exposure on durability of mixes containing silica fume and blast furnace slag	644-652
Nguyen, T. S. / Lorente, S. / Carcassès, M.	Effect of the environment temperature on the chloride diffusion through CEM-I and CEM-V mortars: An experimental study	795-803
Siddique, Rafat / De Schutter, Geert / Noumowé, Albert	Effect of used-foundry sand on the mechanical properties of concrete	976-980
Çolak, Adnan / Cosgun, Turgay / Bakırcı, Ahmet E.	Effects of environmental factors on the adhesion and durability characteristics of epoxy-bonded concrete prisms	758-767
Eren, Ozgur / Marar, Khaled	Effects of limestone crusher dust and steel fibers on concrete	981-988
Boscaino, Gabriele / Celauro, Bernardo / Celauro, Clara / Amadore, Antonio	Evaluation of the laboratory prediction of surface properties of bituminous mixtures	943-952
Hale, W. Micah / Freyne, Seamus F. / Russell, Bruce W.	Examining the frost resistance of high performance concrete	878-888
Özcan, D. Mehmet / Bayraktar, Alemdar / Şahin, Abdurrahman / Haktanır, Tefaruk / Türker, Temel	Experimental and finite element analysis on the steel fiber-reinforced concrete (SFRC) beams ultimate behavior	1064-1077
Sangree, R. H. / Schafer, B. W.	Experimental and numerical analysis of a halved and tabled traditional timber scarf joint	615-624
Lafhaj, Zoubeir / Goueygou, Marc	Experimental study on sound and damaged mortar: Variation of ultrasonic parameters with porosity	953-958
Kim, G. B. / Pilakoutas, K. / Waldron, P.	Finite element analysis of thin GFRC panels reinforced with FRP	930-942
Kłosowski, Paweł / Komar, Wiesław / Woźnica, Krzysztof	Finite element description of nonlinear viscoelastic behaviour of technical fabric	1133-1140
Cultrone, Giuseppe / Sebastián, Eduardo	Fly ash addition in clayey materials to improve the quality of solid bricks	1178-1184
Binici, Hanifi / Aksogan, Orhan / Görür, Ela Bahsude / Kaplan, Hasan / Bodur, Mehmet Nuri	Hydro-abrasive erosion of concrete incorporating ground blast-furnace slag and ground basaltic pumice	804-811
Baskaran, A. / Molleti, S.	Impact of air intrusion on the wind uplift performance of fully bonded roofing assemblies	889-901
Keskin, Hakan / Atar, Musa / Izciler, Mahmut	Impacts of impregnation chemicals on combustion properties of the laminated wood materials produced combination of beech and poplar veneers	634-643
Wu, Shao-peng / Pang, Ling / Mo, Lian-tong / Chen, Yong-chun / Zhu, Guo-jun	Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen	1005-1010
Andrade, L. B. / Rocha, J. C. / Cheriaf, M.	Influence of coal bottom ash as fine aggregate on fresh properties of concrete	609-614
Gonilho Pereira, Cristiana / Castro-Gomes, João / Pereira de Oliveira, Luiz	Influence of natural coarse aggregate size, mineralogy and water content on the permeability of structural concrete	602-608
Padmini, A. K. / Ramamurthy, K. / Mathews, M. S.	Influence of parent concrete on the properties of recycled aggregate concrete	829-836
Tabsh, Sami W. / Abdelfatah, Akmal S.	Influence of recycled concrete aggregates on strength properties of concrete	1163-1167
Xiao, Feipeng / Amirkhanian, Serji N. / Shen, Junan / Putman, Bradley	Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures	1028-1034
Narasimhan, Harikrishna / Chew, M. Y. L.	Integration of durability with structural design: An optimal life cycle cost based design procedure for reinforced concrete structures	918-929
Rossignolo, João Adriano	Interfacial interactions in concretes with silica fume and SBR latex	817-821
Özbay, Erdoğan / Öztaş, Ahmet / Baykasoglu, Adil / Ozbebek, Hakan	Investigating mix proportions of high strength self compacting concrete by using Taguchi method	694-702
Özden, Gürkan / Akdag, Cihan Taylan	Lateral load response of steel fiber reinforced concrete model piles in cohesionless soil	785-794
Anzani, Anna / Garavaglia, Elsa / Binda, Luigia	Long-term damage of historic masonry: A probabilistic model	713-724
Chen, Jian-kang / Jiang, Min-qiang	Long-term evolution of delayed ettringite and gypsum in Portland cement mortars under sulfate erosion	812-816
Chang, Che Way / Lin, Chen Hua / Lien, Hung Sheng	Measurement radius of reinforcing steel bar in concrete using digital image GPR	1057-1063
Tafraoui, Ahmed / Escadeillas, Gilles / Lebaili, Soltane / Vidal, Thierry	Metakaolin in the formulation of UHPC	669-674
Wang, Xiao-Yong / Lee, Han-Seung	A model for predicting the carbonation depth of concrete containing low-calcium fly ash	725-733
Felekoğlu, Burak	A new approach to the characterisation of particle shape and surface properties of powders employed in concrete industry	1154-1162
Sbartai, Z. M. / Laurens, S. / Viriyametanont, K. / Balayssac, J. P. / Arliguie, G.	Non-destructive evaluation of concrete physical condition using radar and artificial neural networks	837-845
Hajjaji, M. / Khalfaoui, A.	Oil shale amended raw clay: Firing transformations and ceramic properties	959-966
Pipilikaki, P. / Katsioti, M. / Gallias, J. L.	Performance of limestone cement mortars in a high sulfates environment	1042-1049
Mukherjee, Abhijit / Rai, Gopal L.	Performance of reinforced concrete beams externally prestressed with fiber composites	822-828
Lukschová, Šárka / Přikryl, Richard / Pertold, Zdeněk	Petrographic identification of alkali–silica reactive aggregates in concrete from 20th century bridges	734-741
Yang, Jiakuan / Liu, Wanchao / Zhang, Lili / Xiao, Bo	Preparation of load-bearing building materials from autoclaved phosphogypsum	687-693
Akram, Tayyeb / Memon, Shazim Ali / Obaid, Humayun	Production of low cost self compacting concrete using bagasse ash	703-712
Katsioti, M. / Giannikos, D. / Tsakiridis, P. E. / Tsibouki, Z.	Properties and hydration of blended cements with mineral alunite	1011-1021
Lee, Soon-Jae / Kim, Hakseo / Amirkhanian, Serji N. / Kim, Kwang W.	Relation of mechanical properties of recycled aged CRM mixtures with binder molecular size distribution	997-1004
Paiva, H. / Esteves, L. P. / Cachim, P. B. / Ferreira, V. M.	Rheology and hardened properties of single-coat render mortars with different types of water retaining agents	1141-1146
Mebarki, A. / Bui, Q. H. / Ami Saada, R. / Delmotte, P. / Sanchez Tizapa, S.	A simplified mechanical model to assess the bearing capacity of masonry walls: Theory and experimental validation	1109-1117
Binici, Hanifi / Aksogan, Orhan / Bakbak, Derya / Kaplan, Hasan / Isik, Bilge	Sound insulation of fibre reinforced mud brick walls	1035-1041
Menadi, B. / Kenai, S. / Khatib, J. / Aït-Mokhtar, A.	Strength and durability of concrete incorporating crushed limestone sand	625-633
Sundarraja, M. C. / Rajamohan, S.	Strengthening of RC beams in shear using GFRP inclined strips – An experimental study	856-864
Cassagnabère, F. / Escadeillas, G. / Mouret, M.	Study of the reactivity of cement/metakaolin binders at early age for specific use in steam cured precast concrete	775-784
Sánchez de Juan, Marta / Alaejos Gutiérrez, Pilar	Study on the influence of attached mortar content on the properties of recycled concrete aggregate	872-877
Sukontasukkul, Piti	Use of crumb rubber to improve thermal and sound properties of pre-cast concrete panel	1084-1092
Qasrawi, Hisham / Shalabi, Faisal / Asi, Ibrahim	Use of low CaO unprocessed steel slag in concrete as fine aggregate	1118-1125
Xue, Yongjie / Hou, Haobo / Zhu, Shujing / Zha, Jin	Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: Pavement performance and environmental impact	989-996
Mahieux, P.-Y. / Aubert, J.-E. / Escadeillas, G.	Utilization of weathered basic oxygen furnace slag in the production of hydraulic road binders	742-747
Luz, C. A. / Rocha, J. C. / Cheriaf, M. / Pera, J.	Valorization of galvanic sludge in sulfoaluminate cement	595-601

About this
data sheet
IssueID
22430
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 23, n. 2 (February 2009)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 23, n. 2 (February 2009)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.