Construction and Building Materials - v. 23, n. 2 (Februar 2009)

Erschienen:	Februar 2009

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Seabra, M. P. / Paiva, H. / Labrincha, J. A. / Ferreira, V. M.	Admixtures effect on fresh state properties of aerial lime based mortars	1147-1153
Giancaspro, James / Papakonstantinou, Christos / Nazier, Mohamed / Balaguru, P.	Aerospace technology for strengthening of bridges	748-757
Parichatprecha, R. / Nimityongskul, P.	Analysis of durability of high performance concrete using artificial neural networks	910-917
Shin, Sung Woo / Oh, Tae Keun	Application of electro-mechanical impedance sensing technique for online monitoring of strength development in concrete using smart PZT patches	1185-1188
Rivard, Patrice / Saint-Pierre, François	Assessing alkali-silica reaction damage to concrete with non-destructive methods: From the lab to the field	902-909
Ransinchung, G. D. / Kumar, Brind / Kumar, Veerendra	Assessment of water absorption and chloride ion penetration of pavement quality concrete admixed with wollastonite and microsilica	1168-1177
Hadi, Muhammad N. S.	Behaviour of eccentric loading of FRP confined fibre steel reinforced concrete columns	1102-1108
Maranhão, Flavio L. / John, Vanderley M.	Bond strength and transversal deformation aging on cement-polymer adhesive mortar	1022-1027
Hao, Qingduo / Wang, Yanlei / He, Zheng / Ou, Jinping	Bond strength of glass fiber reinforced polymer ribbed rebars in normal strength concrete	865-871
Limbachiya, Mukesh C.	Bulk engineering and durability properties of washed glass sand concrete	1078-1083
Silvestre, José Dinis / de Brito, Jorge	Ceramic tiling inspection system	653-668
Lecomte-nana, G. L. / Lesueur, E. / Bonnet, J. P. / Lecomte, G.	Characterization of a lateritic geomaterial and its elaboration through a chemical route	1126-1132
Fajardo, G. / Valdez, P. / Pacheco, J.	Corrosion of steel rebar embedded in natural pozzolan based mortars exposed to chlorides	768-774
Qin, Menghao / Belarbi, Rafik / Aït-Mokhtar, Abdelkarim / Nilsson, Lars-Olof	Coupled heat and moisture transfer in multi-layer building materials	967-975
Lopez-Arce, P. / Garcia-Guinea, J. / Benavente, D. / Tormo, L. / Doehne, E.	Deterioration of dolostone by magnesium sulphate salt: An example of incompatible building materials at Bonaval Monastery, Spain	846-855
Kuisma, R. / Kymäläinen, H.-R. / Sjöberg, A.-M.	Determination of cleanability and wearing of plastic flooring surfaces in field and laboratory conditions	1093-1101
Tongaroonsri, Sontaya / Tangtermsirikul, Somnuk	Effect of mineral admixtures and curing periods on shrinkage and cracking age under restrained condition	1050-1056
Ang, C. N. / Wang, Y. C.	Effect of moisture transfer on specific heat of gypsum plasterboard at high temperatures	675-686
Ganjian, Eshmaiel / Pouya, Homayoon Sadeghi	The effect of Persian Gulf tidal zone exposure on durability of mixes containing silica fume and blast furnace slag	644-652
Nguyen, T. S. / Lorente, S. / Carcassès, M.	Effect of the environment temperature on the chloride diffusion through CEM-I and CEM-V mortars: An experimental study	795-803
Siddique, Rafat / De Schutter, Geert / Noumowé, Albert	Effect of used-foundry sand on the mechanical properties of concrete	976-980
Çolak, Adnan / Cosgun, Turgay / Bakırcı, Ahmet E.	Effects of environmental factors on the adhesion and durability characteristics of epoxy-bonded concrete prisms	758-767
Eren, Ozgur / Marar, Khaled	Effects of limestone crusher dust and steel fibers on concrete	981-988
Boscaino, Gabriele / Celauro, Bernardo / Celauro, Clara / Amadore, Antonio	Evaluation of the laboratory prediction of surface properties of bituminous mixtures	943-952
Hale, W. Micah / Freyne, Seamus F. / Russell, Bruce W.	Examining the frost resistance of high performance concrete	878-888
Özcan, D. Mehmet / Bayraktar, Alemdar / Şahin, Abdurrahman / Haktanır, Tefaruk / Türker, Temel	Experimental and finite element analysis on the steel fiber-reinforced concrete (SFRC) beams ultimate behavior	1064-1077
Sangree, R. H. / Schafer, B. W.	Experimental and numerical analysis of a halved and tabled traditional timber scarf joint	615-624
Lafhaj, Zoubeir / Goueygou, Marc	Experimental study on sound and damaged mortar: Variation of ultrasonic parameters with porosity	953-958
Kim, G. B. / Pilakoutas, K. / Waldron, P.	Finite element analysis of thin GFRC panels reinforced with FRP	930-942
Kłosowski, Paweł / Komar, Wiesław / Woźnica, Krzysztof	Finite element description of nonlinear viscoelastic behaviour of technical fabric	1133-1140
Cultrone, Giuseppe / Sebastián, Eduardo	Fly ash addition in clayey materials to improve the quality of solid bricks	1178-1184
Binici, Hanifi / Aksogan, Orhan / Görür, Ela Bahsude / Kaplan, Hasan / Bodur, Mehmet Nuri	Hydro-abrasive erosion of concrete incorporating ground blast-furnace slag and ground basaltic pumice	804-811
Baskaran, A. / Molleti, S.	Impact of air intrusion on the wind uplift performance of fully bonded roofing assemblies	889-901
Keskin, Hakan / Atar, Musa / Izciler, Mahmut	Impacts of impregnation chemicals on combustion properties of the laminated wood materials produced combination of beech and poplar veneers	634-643
Wu, Shao-peng / Pang, Ling / Mo, Lian-tong / Chen, Yong-chun / Zhu, Guo-jun	Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen	1005-1010
Andrade, L. B. / Rocha, J. C. / Cheriaf, M.	Influence of coal bottom ash as fine aggregate on fresh properties of concrete	609-614
Gonilho Pereira, Cristiana / Castro-Gomes, João / Pereira de Oliveira, Luiz	Influence of natural coarse aggregate size, mineralogy and water content on the permeability of structural concrete	602-608
Padmini, A. K. / Ramamurthy, K. / Mathews, M. S.	Influence of parent concrete on the properties of recycled aggregate concrete	829-836
Tabsh, Sami W. / Abdelfatah, Akmal S.	Influence of recycled concrete aggregates on strength properties of concrete	1163-1167
Xiao, Feipeng / Amirkhanian, Serji N. / Shen, Junan / Putman, Bradley	Influences of crumb rubber size and type on reclaimed asphalt pavement (RAP) mixtures	1028-1034
Narasimhan, Harikrishna / Chew, M. Y. L.	Integration of durability with structural design: An optimal life cycle cost based design procedure for reinforced concrete structures	918-929
Rossignolo, João Adriano	Interfacial interactions in concretes with silica fume and SBR latex	817-821
Özbay, Erdoğan / Öztaş, Ahmet / Baykasoglu, Adil / Ozbebek, Hakan	Investigating mix proportions of high strength self compacting concrete by using Taguchi method	694-702
Özden, Gürkan / Akdag, Cihan Taylan	Lateral load response of steel fiber reinforced concrete model piles in cohesionless soil	785-794
Anzani, Anna / Garavaglia, Elsa / Binda, Luigia	Long-term damage of historic masonry: A probabilistic model	713-724
Chen, Jian-kang / Jiang, Min-qiang	Long-term evolution of delayed ettringite and gypsum in Portland cement mortars under sulfate erosion	812-816
Chang, Che Way / Lin, Chen Hua / Lien, Hung Sheng	Measurement radius of reinforcing steel bar in concrete using digital image GPR	1057-1063
Tafraoui, Ahmed / Escadeillas, Gilles / Lebaili, Soltane / Vidal, Thierry	Metakaolin in the formulation of UHPC	669-674
Wang, Xiao-Yong / Lee, Han-Seung	A model for predicting the carbonation depth of concrete containing low-calcium fly ash	725-733
Felekoğlu, Burak	A new approach to the characterisation of particle shape and surface properties of powders employed in concrete industry	1154-1162
Sbartai, Z. M. / Laurens, S. / Viriyametanont, K. / Balayssac, J. P. / Arliguie, G.	Non-destructive evaluation of concrete physical condition using radar and artificial neural networks	837-845
Hajjaji, M. / Khalfaoui, A.	Oil shale amended raw clay: Firing transformations and ceramic properties	959-966
Pipilikaki, P. / Katsioti, M. / Gallias, J. L.	Performance of limestone cement mortars in a high sulfates environment	1042-1049
Mukherjee, Abhijit / Rai, Gopal L.	Performance of reinforced concrete beams externally prestressed with fiber composites	822-828
Lukschová, Šárka / Přikryl, Richard / Pertold, Zdeněk	Petrographic identification of alkali–silica reactive aggregates in concrete from 20th century bridges	734-741
Yang, Jiakuan / Liu, Wanchao / Zhang, Lili / Xiao, Bo	Preparation of load-bearing building materials from autoclaved phosphogypsum	687-693
Akram, Tayyeb / Memon, Shazim Ali / Obaid, Humayun	Production of low cost self compacting concrete using bagasse ash	703-712
Katsioti, M. / Giannikos, D. / Tsakiridis, P. E. / Tsibouki, Z.	Properties and hydration of blended cements with mineral alunite	1011-1021
Lee, Soon-Jae / Kim, Hakseo / Amirkhanian, Serji N. / Kim, Kwang W.	Relation of mechanical properties of recycled aged CRM mixtures with binder molecular size distribution	997-1004
Paiva, H. / Esteves, L. P. / Cachim, P. B. / Ferreira, V. M.	Rheology and hardened properties of single-coat render mortars with different types of water retaining agents	1141-1146
Mebarki, A. / Bui, Q. H. / Ami Saada, R. / Delmotte, P. / Sanchez Tizapa, S.	A simplified mechanical model to assess the bearing capacity of masonry walls: Theory and experimental validation	1109-1117
Binici, Hanifi / Aksogan, Orhan / Bakbak, Derya / Kaplan, Hasan / Isik, Bilge	Sound insulation of fibre reinforced mud brick walls	1035-1041
Menadi, B. / Kenai, S. / Khatib, J. / Aït-Mokhtar, A.	Strength and durability of concrete incorporating crushed limestone sand	625-633
Sundarraja, M. C. / Rajamohan, S.	Strengthening of RC beams in shear using GFRP inclined strips – An experimental study	856-864
Cassagnabère, F. / Escadeillas, G. / Mouret, M.	Study of the reactivity of cement/metakaolin binders at early age for specific use in steam cured precast concrete	775-784
Sánchez de Juan, Marta / Alaejos Gutiérrez, Pilar	Study on the influence of attached mortar content on the properties of recycled concrete aggregate	872-877
Sukontasukkul, Piti	Use of crumb rubber to improve thermal and sound properties of pre-cast concrete panel	1084-1092
Qasrawi, Hisham / Shalabi, Faisal / Asi, Ibrahim	Use of low CaO unprocessed steel slag in concrete as fine aggregate	1118-1125
Xue, Yongjie / Hou, Haobo / Zhu, Shujing / Zha, Jin	Utilization of municipal solid waste incineration ash in stone mastic asphalt mixture: Pavement performance and environmental impact	989-996
Mahieux, P.-Y. / Aubert, J.-E. / Escadeillas, G.	Utilization of weathered basic oxygen furnace slag in the production of hydraulic road binders	742-747
Luz, C. A. / Rocha, J. C. / Cheriaf, M. / Pera, J.	Valorization of galvanic sludge in sulfoaluminate cement	595-601

Über diese
Datenseite
IssueID
22430
Veröffentlicht am:
16.12.2018
Geändert am:
16.12.2018

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - v. 23, n. 2 (Februar 2009)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - v. 23, n. 2 (Februar 2009)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.