Construction and Building Materials - v. 23, n. 1 (January 2009)

Published:	January 2009

Articles in this Issue

Author(s)	Title	Page(s)
Bougara, A. / Lynsdale, C. / Ezziane, K.	Activation of Algerian slag in mortars	542-547
Suo, Zhi / Wong, Wing Gun	Analysis of fatigue crack growth behavior in asphalt concrete material in wearing course	462-468
Zhao, Feng-qing / Zhao, Jing / Liu, Hong-jie	Autoclaved brick from low-silicon tailings	538-541
Corinaldesi, Valeria / Moriconi, Giacomo	Behaviour of cementitious mortars containing different kinds of recycled aggregate	289-294
Valcuende, M. / Parra, C.	Bond behaviour of reinforcement in self-compacting concretes	162-170
Shui, Zhonghe / Xuan, Dongxing / Chen, Wei / Yu, Rui / Zhang, Rui	Cementitious characteristics of hydrated cement paste subjected to various dehydration temperatures	531-537
Labiadh, Mohamed Riadh / Ouezdou, Mongi Ben / Hajjem, Besma Trojet / Mensi, Rachid	Characterization of waterproof-covering mortars on Ottoman monuments of "Ghar El Melh" (Tunisia)	423-433
Sisomphon, Kritsada	A chemical analysis method for determining blast-furnace slag content in hardened concrete	54-61
Yuan, Qiang / Shi, Caijun / De Schutter, Geert / Audenaert, Katrien / Deng, Dehua	Chloride binding of cement-based materials subjected to external chloride environment – A review	1-13
Gadve, Sangeeta / Mukherjee, A. / Malhotra, S. N.	Corrosion of steel reinforcements embedded in FRP wrapped concrete	153-161
Weritz, Friederike / Taffe, Alexander / Schaurich, Dieter / Wilsch, Gerd	Detailed depth profiles of sulfate ingress into concrete measured with laser induced breakdown spectroscopy	275-283
O'Rourke, Brian / McNally, Ciaran / Richardson, Mark G.	Development of calcium sulfate–ggbs–Portland cement binders	340-346
Adesanya, D. A. / Raheem, A. A.	Development of corn cob ash blended cement	347-352
Park, DongCheon / Ahn, Jaecheol / Oh, SangGyun / Song, HwaCheol / Noguchi, Takafumi	Drying effect of polymer-modified cement for patch-repaired mortar on constraint stress	434-447
Thodesen, Carl / Shatanawi, Khaldoun / Amirkhanian, Serji	Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity	295-303
Demirdag, S.	The effect of using different polymer and cement based materials in pore filling applications on technical parameters of travertine stone	522-530
Keleştemur, Oğuzhan / Yıldız, Servet	Effect of various dual-phase heat treatments on the corrosion behavior of reinforcing steel used in the reinforced concrete structures	78-84
Lee, Hong-nin / Wong, Wing-gun	Effect of wax on basic and rheological properties of bitumen with similar Penetration-grades	507-514
Tommaselli, M. A. G. / Mariano, N. A. / Kuri, S. E.	Effectiveness of corrosion inhibitors in saturated calcium hydroxide solutions acidified by acid rain components	328-333
Bertolini, L. / Coppola, L. / Gastaldi, M. / Redaelli, E.	Electroosmotic transport in porous construction materials and dehumidification of masonry	254-263
Li, Yeou-Fong / Xie, Yao-Ming / Tsai, Ming-Jer	Enhancement of the flexural performance of retrofitted wood beams using CFRP composite sheets	411-422
Belmouden, Y. / Lestuzzi, P.	An equivalent frame model for seismic analysis of masonry and reinforced concrete buildings	40-53
Güneyisi, Erhan / Gesoǧlu, Mehmet / Özturan, Turan / Özbay, Erdoğan	Estimation of chloride permeability of concretes by empirical modeling: Considering effects of cement type, curing condition and age	469-481
Aglan, H. / Morsy, M. / Allie, A. / Fouad, F.	Evaluation of fiber reinforced nanostructured perlite-cementitious surface compounds for building skin applications	138-145
Branco, Jorge M. / Cruz, Paulo J. S. / Piazza, Maurizio	Experimental analysis of laterally loaded nailed timber-to-concrete connections	400-410
Sangree, R. H. / Schafer, B. W.	Experimental and numerical analysis of a stop-splayed traditional timber scarf joint with key	376-385
Marsavina, L. / Audenaert, K. / De Schutter, G. / Faur, N. / Marsavina, D.	Experimental and numerical determination of the chloride penetration in cracked concrete	264-274
Veiga, M. Rosário / Velosa, Ana / Magalhães, Ana	Experimental applications of mortars with pozzolanic additions: Characterization and performance evaluation	318-327
Merino, Mercedes del Río / Santa Cruz Astorqui, Jaime	Finite element simulation to design constructive elements: An application to light gypsum plaster for partitions	14-27
Akisetty, Chandra K. / Lee, Soon-Jae / Amirkhanian, Serji N.	High temperature properties of rubberized binders containing warm asphalt additives	565-573
Mohammadi, Y. / Carkon-Azad, R. / Singh, S. P. / Kaushik, S. K.	Impact resistance of steel fibrous concrete containing fibres of mixed aspect ratio	183-189
Ann, K. Y. / Ahn, J. H. / Ryou, J. S.	The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures	239-245
Han, Cheon-Goo / Han, Min-Cheol / Heo, Young-Sun	Improvement of residual compressive strength and spalling resistance of high-strength RC columns subjected to fire	107-116
Krummenauer, Karine / de Oliveira Andrade, Jairo José	Incorporation of chromium-tanned leather residue to asphalt micro-surface layer	574-581
Silva, João / de Brito, Jorge / Veiga, Rosário	Incorporation of fine ceramics in mortars	556-564
Atis, Cengiz Duran / Bilim, Cahit / Çelik, Özlem / Karahan, Okan	Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar	548-555
Shen, Junan / Amirkhanian, Serji / Xiao, Feipeng / Tang, Boming	Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders	304-310
Ding, Y. / Zhang, Y. / Thomas, A.	The investigation on strength and flexural toughness of fibre cocktail reinforced self-compacting high performance concrete	448-452
Shen, Der-hsien / Wu, Chia-Ming / Du, Jia-Chong	Laboratory investigation of basic oxygen furnace slag for substitution of aggregate in porous asphalt mixture	453-461
Song, X. F. / Wei, J. F. / He, T. Sh.	A method to repair concrete leakage through cracks by synthesizing super-absorbent resin in situ	386-391
Marrocchino, E. / Fried, A. N. / Koulouris, A. / Vaccaro, C.	Micro-chemical/structural characterisation of thin layer masonry: A correlation with engineering performance	582-594
Morsy, M. S. / Aglan, H. A. / Abd El Razek, M. M.	Nanostructured zonolite–cementitious surface compounds for thermal insulation	515-521
De Flander, Katleen / Rovers, Ronald	One laminated bamboo-frame house per hectare per year	210-218
Akcay, Burcu / Tasdemir, Mehmet Ali	Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete	353-363
Roziere, Emmanuel / Loukili, Ahmed / Cussigh, François	A performance based approach for durability of concrete exposed to carbonation	190-199
Park, Hee Mun / Choi, Ji Young / Lee, Hyun Jong / Hwang, Eui Yoon	Performance evaluation of a high durability asphalt binder and a high durability asphalt mixture for bridge deck pavements	219-225
Mačiulaitis, Romualdas / Malaiškienė, Jurgita	Possibilities to control ceramics properties by changing firing cycles	226-232
Prasad, B. K. Raghu / Eskandari, Hamid / Venkatarama Reddy, B. V.	Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN	117-128
Arikan, Metin / Sobolev, Konstantin / Ertün, Tomris / Yeginobali, Asim / Turker, Pelin	Properties of blended cements with thermally activated kaolin	62-70
Atis, Cengiz Duran / Karahan, Okan	Properties of steel fiber reinforced fly ash concrete	392-399
Xu, Chang / Chengkui, Huang / Decheng, Jiang / Yuancheng, Song	Push-out test of pre-stressing concrete filled circular steel tube columns by means of expansive cement	491-497
Santos, Cristóvão L. / de Jesus, Abilio M. P. / Morais, José J. L. / Lousada, José L. P. C.	Quasi-static mechanical behaviour of a double-shear single dowel wood connection	171-182
Kovler, Konstantin	Radiological constraints of using building materials and industrial by-products in construction	246-253
Gunes Yilmaz, N. / Karaca, Z. / Goktan, R. M. / Akal, C.	Relative brittleness characterization of some selected granitic building stones: Influence of mineral grain size	370-375
Liu, Haibo / Xiang, Tianyu / Zhao, Renda	Research on non-linear structural behaviors of prestressed concrete beams made of high strength and steel fiber reinforced concretes	85-95
Hansen, Klavs Feilberg / Stang, Birgitte Dela	Safety against formation of through cracks of profiled fibre-reinforced cement sheets for roofing	334-339
Ahmad, Shakeel / Ghani, Farrukh / Raghib Adil, Md.	Seismic friction base isolation performance using demolished waste in masonry housing	146-152
Cattaneo, Sara / Rosati, Gianpaolo / Banthia, Nemy	A simple model to explain the effect of different boundary conditions in direct tensile tests	129-137
Adesanya, D. A. / Raheem, A. A.	A study of the workability and compressive strength characteristics of corn cob ash blended cement concrete	311-317
Lee, Mun-Hwan / Lee, Jong-Chan	Study on the cause of pop-out defects on the concrete wall and repair method	482-490
Ortiz, Oscar / Castells, Francesc / Sonnemann, Guido	Sustainability in the construction industry: A review of recent developments based on LCA	28-39
Lertsatitthanakorn, C. / Atthajariyakul, S. / Soponronnarit, S.	Techno-economical evaluation of a rice husk ash (RHA) based sand–cement block for reducing solar conduction heat gain to a building	364-369
Ahmed, S. F. U. / Maalej, M.	Tensile strain hardening behaviour of hybrid steel-polyethylene fibre reinforced cementitious composites	96-106
Bäckström, Magnus / Kliger, I. Robert	Timber-framed partition walls and their restraining effect on warp in built-in wall studs – A model for spring	71-77
Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said	Tungsten mine waste geopolymeric binder: Preliminary hydration products investigations	200-209
Ibrahim, Asi / Faisal, Shalabi / Jamil, Naji	Use of basalt in asphalt concrete mixes	498-506
Degirmenci, Nurhayat / Yilmaz, Arin	Use of diatomite as partial replacement for Portland cement in cement mortars	284-288
Jalili, M. M. / Moradian, S. / Hosseinpour, D.	The use of inorganic conversion coatings to enhance the corrosion resistance of reinforcement and the bond strength at the rebar/concrete	233-238

About this
data sheet
IssueID
22429
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 23, n. 1 (January 2009)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 23, n. 1 (January 2009)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.