Construction and Building Materials - v. 23, n. 1 (janvier 2009)

Publié:	janvier 2009

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Bougara, A. / Lynsdale, C. / Ezziane, K.	Activation of Algerian slag in mortars	542-547
Suo, Zhi / Wong, Wing Gun	Analysis of fatigue crack growth behavior in asphalt concrete material in wearing course	462-468
Zhao, Feng-qing / Zhao, Jing / Liu, Hong-jie	Autoclaved brick from low-silicon tailings	538-541
Corinaldesi, Valeria / Moriconi, Giacomo	Behaviour of cementitious mortars containing different kinds of recycled aggregate	289-294
Valcuende, M. / Parra, C.	Bond behaviour of reinforcement in self-compacting concretes	162-170
Shui, Zhonghe / Xuan, Dongxing / Chen, Wei / Yu, Rui / Zhang, Rui	Cementitious characteristics of hydrated cement paste subjected to various dehydration temperatures	531-537
Labiadh, Mohamed Riadh / Ouezdou, Mongi Ben / Hajjem, Besma Trojet / Mensi, Rachid	Characterization of waterproof-covering mortars on Ottoman monuments of "Ghar El Melh" (Tunisia)	423-433
Sisomphon, Kritsada	A chemical analysis method for determining blast-furnace slag content in hardened concrete	54-61
Yuan, Qiang / Shi, Caijun / De Schutter, Geert / Audenaert, Katrien / Deng, Dehua	Chloride binding of cement-based materials subjected to external chloride environment – A review	1-13
Gadve, Sangeeta / Mukherjee, A. / Malhotra, S. N.	Corrosion of steel reinforcements embedded in FRP wrapped concrete	153-161
Weritz, Friederike / Taffe, Alexander / Schaurich, Dieter / Wilsch, Gerd	Detailed depth profiles of sulfate ingress into concrete measured with laser induced breakdown spectroscopy	275-283
O'Rourke, Brian / McNally, Ciaran / Richardson, Mark G.	Development of calcium sulfate–ggbs–Portland cement binders	340-346
Adesanya, D. A. / Raheem, A. A.	Development of corn cob ash blended cement	347-352
Park, DongCheon / Ahn, Jaecheol / Oh, SangGyun / Song, HwaCheol / Noguchi, Takafumi	Drying effect of polymer-modified cement for patch-repaired mortar on constraint stress	434-447
Thodesen, Carl / Shatanawi, Khaldoun / Amirkhanian, Serji	Effect of crumb rubber characteristics on crumb rubber modified (CRM) binder viscosity	295-303
Demirdag, S.	The effect of using different polymer and cement based materials in pore filling applications on technical parameters of travertine stone	522-530
Keleştemur, Oğuzhan / Yıldız, Servet	Effect of various dual-phase heat treatments on the corrosion behavior of reinforcing steel used in the reinforced concrete structures	78-84
Lee, Hong-nin / Wong, Wing-gun	Effect of wax on basic and rheological properties of bitumen with similar Penetration-grades	507-514
Tommaselli, M. A. G. / Mariano, N. A. / Kuri, S. E.	Effectiveness of corrosion inhibitors in saturated calcium hydroxide solutions acidified by acid rain components	328-333
Bertolini, L. / Coppola, L. / Gastaldi, M. / Redaelli, E.	Electroosmotic transport in porous construction materials and dehumidification of masonry	254-263
Li, Yeou-Fong / Xie, Yao-Ming / Tsai, Ming-Jer	Enhancement of the flexural performance of retrofitted wood beams using CFRP composite sheets	411-422
Belmouden, Y. / Lestuzzi, P.	An equivalent frame model for seismic analysis of masonry and reinforced concrete buildings	40-53
Güneyisi, Erhan / Gesoǧlu, Mehmet / Özturan, Turan / Özbay, Erdoğan	Estimation of chloride permeability of concretes by empirical modeling: Considering effects of cement type, curing condition and age	469-481
Aglan, H. / Morsy, M. / Allie, A. / Fouad, F.	Evaluation of fiber reinforced nanostructured perlite-cementitious surface compounds for building skin applications	138-145
Branco, Jorge M. / Cruz, Paulo J. S. / Piazza, Maurizio	Experimental analysis of laterally loaded nailed timber-to-concrete connections	400-410
Sangree, R. H. / Schafer, B. W.	Experimental and numerical analysis of a stop-splayed traditional timber scarf joint with key	376-385
Marsavina, L. / Audenaert, K. / De Schutter, G. / Faur, N. / Marsavina, D.	Experimental and numerical determination of the chloride penetration in cracked concrete	264-274
Veiga, M. Rosário / Velosa, Ana / Magalhães, Ana	Experimental applications of mortars with pozzolanic additions: Characterization and performance evaluation	318-327
Merino, Mercedes del Río / Santa Cruz Astorqui, Jaime	Finite element simulation to design constructive elements: An application to light gypsum plaster for partitions	14-27
Akisetty, Chandra K. / Lee, Soon-Jae / Amirkhanian, Serji N.	High temperature properties of rubberized binders containing warm asphalt additives	565-573
Mohammadi, Y. / Carkon-Azad, R. / Singh, S. P. / Kaushik, S. K.	Impact resistance of steel fibrous concrete containing fibres of mixed aspect ratio	183-189
Ann, K. Y. / Ahn, J. H. / Ryou, J. S.	The importance of chloride content at the concrete surface in assessing the time to corrosion of steel in concrete structures	239-245
Han, Cheon-Goo / Han, Min-Cheol / Heo, Young-Sun	Improvement of residual compressive strength and spalling resistance of high-strength RC columns subjected to fire	107-116
Krummenauer, Karine / de Oliveira Andrade, Jairo José	Incorporation of chromium-tanned leather residue to asphalt micro-surface layer	574-581
Silva, João / de Brito, Jorge / Veiga, Rosário	Incorporation of fine ceramics in mortars	556-564
Atis, Cengiz Duran / Bilim, Cahit / Çelik, Özlem / Karahan, Okan	Influence of activator on the strength and drying shrinkage of alkali-activated slag mortar	548-555
Shen, Junan / Amirkhanian, Serji / Xiao, Feipeng / Tang, Boming	Influence of surface area and size of crumb rubber on high temperature properties of crumb rubber modified binders	304-310
Ding, Y. / Zhang, Y. / Thomas, A.	The investigation on strength and flexural toughness of fibre cocktail reinforced self-compacting high performance concrete	448-452
Shen, Der-hsien / Wu, Chia-Ming / Du, Jia-Chong	Laboratory investigation of basic oxygen furnace slag for substitution of aggregate in porous asphalt mixture	453-461
Song, X. F. / Wei, J. F. / He, T. Sh.	A method to repair concrete leakage through cracks by synthesizing super-absorbent resin in situ	386-391
Marrocchino, E. / Fried, A. N. / Koulouris, A. / Vaccaro, C.	Micro-chemical/structural characterisation of thin layer masonry: A correlation with engineering performance	582-594
Morsy, M. S. / Aglan, H. A. / Abd El Razek, M. M.	Nanostructured zonolite–cementitious surface compounds for thermal insulation	515-521
De Flander, Katleen / Rovers, Ronald	One laminated bamboo-frame house per hectare per year	210-218
Akcay, Burcu / Tasdemir, Mehmet Ali	Optimisation of using lightweight aggregates in mitigating autogenous deformation of concrete	353-363
Roziere, Emmanuel / Loukili, Ahmed / Cussigh, François	A performance based approach for durability of concrete exposed to carbonation	190-199
Park, Hee Mun / Choi, Ji Young / Lee, Hyun Jong / Hwang, Eui Yoon	Performance evaluation of a high durability asphalt binder and a high durability asphalt mixture for bridge deck pavements	219-225
Mačiulaitis, Romualdas / Malaiškienė, Jurgita	Possibilities to control ceramics properties by changing firing cycles	226-232
Prasad, B. K. Raghu / Eskandari, Hamid / Venkatarama Reddy, B. V.	Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN	117-128
Arikan, Metin / Sobolev, Konstantin / Ertün, Tomris / Yeginobali, Asim / Turker, Pelin	Properties of blended cements with thermally activated kaolin	62-70
Atis, Cengiz Duran / Karahan, Okan	Properties of steel fiber reinforced fly ash concrete	392-399
Xu, Chang / Chengkui, Huang / Decheng, Jiang / Yuancheng, Song	Push-out test of pre-stressing concrete filled circular steel tube columns by means of expansive cement	491-497
Santos, Cristóvão L. / de Jesus, Abilio M. P. / Morais, José J. L. / Lousada, José L. P. C.	Quasi-static mechanical behaviour of a double-shear single dowel wood connection	171-182
Kovler, Konstantin	Radiological constraints of using building materials and industrial by-products in construction	246-253
Gunes Yilmaz, N. / Karaca, Z. / Goktan, R. M. / Akal, C.	Relative brittleness characterization of some selected granitic building stones: Influence of mineral grain size	370-375
Liu, Haibo / Xiang, Tianyu / Zhao, Renda	Research on non-linear structural behaviors of prestressed concrete beams made of high strength and steel fiber reinforced concretes	85-95
Hansen, Klavs Feilberg / Stang, Birgitte Dela	Safety against formation of through cracks of profiled fibre-reinforced cement sheets for roofing	334-339
Ahmad, Shakeel / Ghani, Farrukh / Raghib Adil, Md.	Seismic friction base isolation performance using demolished waste in masonry housing	146-152
Cattaneo, Sara / Rosati, Gianpaolo / Banthia, Nemy	A simple model to explain the effect of different boundary conditions in direct tensile tests	129-137
Adesanya, D. A. / Raheem, A. A.	A study of the workability and compressive strength characteristics of corn cob ash blended cement concrete	311-317
Lee, Mun-Hwan / Lee, Jong-Chan	Study on the cause of pop-out defects on the concrete wall and repair method	482-490
Ortiz, Oscar / Castells, Francesc / Sonnemann, Guido	Sustainability in the construction industry: A review of recent developments based on LCA	28-39
Lertsatitthanakorn, C. / Atthajariyakul, S. / Soponronnarit, S.	Techno-economical evaluation of a rice husk ash (RHA) based sand–cement block for reducing solar conduction heat gain to a building	364-369
Ahmed, S. F. U. / Maalej, M.	Tensile strain hardening behaviour of hybrid steel-polyethylene fibre reinforced cementitious composites	96-106
Bäckström, Magnus / Kliger, I. Robert	Timber-framed partition walls and their restraining effect on warp in built-in wall studs – A model for spring	71-77
Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said	Tungsten mine waste geopolymeric binder: Preliminary hydration products investigations	200-209
Ibrahim, Asi / Faisal, Shalabi / Jamil, Naji	Use of basalt in asphalt concrete mixes	498-506
Degirmenci, Nurhayat / Yilmaz, Arin	Use of diatomite as partial replacement for Portland cement in cement mortars	284-288
Jalili, M. M. / Moradian, S. / Hosseinpour, D.	The use of inorganic conversion coatings to enhance the corrosion resistance of reinforcement and the bond strength at the rebar/concrete	233-238

Informations
sur cette fiche
IssueID
22429
Publié(e) le:
16.12.2018
Modifié(e) le:
16.12.2018

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - v. 23, n. 1 (janvier 2009)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - v. 23, n. 1 (janvier 2009)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.