Construction and Building Materials - v. 22, n. 7 (July 2008)

Published:	July 2008

Articles in this Issue

Author(s)	Title	Page(s)
Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said	Alkali-activated binders: A review	1305-1314
Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said	Alkali-activated binders: A review. Part 2. About materials and binders manufacture	1315-1322
Hossain, Khandaker M. Anwar	Bond characteristics of plain and deformed bars in lightweight pumice concrete	1491-1499
Hughes, D. C. / Sugden, D. B. / Jaglin, D. / Mucha, D.	Calcination of Roman cement: A pilot study using cement-stones from Whitby	1446-1455
Gökay, M. K. / Gundogdu, I. B.	Color identification of some Turkish marbles	1342-1349
Lee, Soon-Jae / Akisetty, Chandra K. / Amirkhanian, Serji N.	The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements	1368-1376
Elkhadiri, I. / Puertas, F.	The effect of curing temperature on sulphate-resistant cement hydration and strength	1331-1341
Caré, Sabine	Effect of temperature on porosity and on chloride diffusion in cement pastes	1560-1573
Schubel, P. J. / Warrior, N. A. / Elliott, K. S.	Evaluation of concrete mixes and mineral additions when used with controlled permeable formwork (CPF)	1536-1542
Atici, U. / Ersoy, A.	Evaluation of destruction specific energy of fly ash and slag admixed concrete interlocking paving blocks (CIPB)	1507-1514
Sukumar, Binu / Nagamani, K. / Srinivasa Raghavan, R.	Evaluation of strength at early ages of self-compacting concrete with high volume fly ash	1394-1401
Mazzotti, C. / Savoia, M. / Ferracuti, B.	An experimental study on delamination of FRP plates bonded to concrete	1409-1421
Casuccio, M. / Torrijos, M. C. / Giaccio, G. / Zerbino, R.	Failure mechanism of recycled aggregate concrete	1500-1506
Mňahončáková, Eva / Pavlíková, Milena / Grzeszczyk, Stefania / Rovnanı´ková, Pavla / Černý, Robert	Hydric, thermal and mechanical properties of self-compacting concrete containing different fillers	1594-1600
Oehlers, D. J. / Rashid, R. / Seracino, R.	IC debonding resistance of groups of FRP NSM strips in reinforced concrete beams	1574-1582
Keskin, Hakan / Atar, Musa / Togay, Abdullah	Impacts of impregnation with Imersol-Aqua on the compression strength of some solid wood materials	1402-1408
Chaki, S. / Takarli, M. / Agbodjan, W. P.	Influence of thermal damage on physical properties of a granite rock: Porosity, permeability and ultrasonic wave evolutions	1456-1461
Schubel, P. J. / Warrior, N. A. / Elliott, K. S. / Jones, M.	An Investigation into the critical factors affecting the performance of composite controlled permeable formwork liners: Part I – Drainage medium	1551-1559
Ding, Y. / Liu, S. / Zhang, Y. / Thomas, A.	The investigation on the workability of fibre cocktail reinforced self-compacting high performance concrete	1462-1470
Shu, Xiang / Huang, Baoshan / Vukosavljevic, Dragon	Laboratory evaluation of fatigue characteristics of recycled asphalt mixture	1323-1330
Espinosa, R. M. / Franke, L. / Deckelmann, G.	Model for the mechanical stress due to the salt crystallization in porous materials	1350-1367
Özşahin, Talat Şükrü / Oruç, Şeref	Neural network model for resilient modulus of emulsified asphalt mixtures	1436-1445
Dias, W. P. S. / Seneviratne, G. A. P. S. N. / Nanayakkara, S. M. A.	Offshore sand for reinforced concrete	1377-1384
Andiç, Ö. / Yardımcı, M. Y. / Ramyar, K.	Performance of carbon, polyvinylalcohol and steel based microfibers on alkali–silica reaction expansion	1527-1531
Binici, Hanifi / Aksogan, Orhan / Görür, Ela Bahsude / Kaplan, Hasan / Bodur, Mehmet Nuri	Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack	1515-1526
García, R. / de la Villa, R. Vigil / Vegas, I. / Frías, M. / Sánchez de Rojas, M. I.	The pozzolanic properties of paper sludge waste	1484-1490
Demir, Fuat	Prediction of elastic modulus of normal and high strength concrete by artificial neural networks	1428-1435
Demir, Fuat / Armagan Korkmaz, K.	Prediction of lower and upper bounds of elastic modulus of high strength concrete	1385-1393
Turgut, Paki	Properties of masonry blocks produced with waste limestone sawdust and glass powder	1422-1427
Lo, Tommy Y. / Cui, H. Z. / Tang, P. W. C. / Leung, H. C.	Strength analysis of bamboo by microscopic investigation of bamboo fibre	1532-1535
Özçifçi, Ayhan / Yapıcı, Fatih	Structural performance of the finger-jointed strength of some wood species with different joint configurations	1543-1550
Apostolopoulos, C. A. / Koutsoukos, P. G.	Study of the corrosion of reinforcement in concrete elements used for the repair of monuments	1583-1593
Guo, Xiao Lu / Shi, Hui Sheng	Thermal treatment and utilization of flue gas desulphurization gypsum as an admixture in cement and concrete	1471-1476
Erdem, Tahir Kemal / Kırca, Önder	Use of binary and ternary blends in high strength concrete	1477-1483

About this
data sheet
IssueID
22423
Published on:
16/12/2018
Last updated on:
16/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 22, n. 7 (July 2008)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 22, n. 7 (July 2008)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.