Construction and Building Materials - v. 22, n. 7 (juillet 2008)

Publié:	juillet 2008

Auteur(s)	Titre	Page(s)
Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said	Alkali-activated binders: A review	1305-1314
Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said	Alkali-activated binders: A review. Part 2. About materials and binders manufacture	1315-1322
Hossain, Khandaker M. Anwar	Bond characteristics of plain and deformed bars in lightweight pumice concrete	1491-1499
Hughes, D. C. / Sugden, D. B. / Jaglin, D. / Mucha, D.	Calcination of Roman cement: A pilot study using cement-stones from Whitby	1446-1455
Gökay, M. K. / Gundogdu, I. B.	Color identification of some Turkish marbles	1342-1349
Lee, Soon-Jae / Akisetty, Chandra K. / Amirkhanian, Serji N.	The effect of crumb rubber modifier (CRM) on the performance properties of rubberized binders in HMA pavements	1368-1376
Elkhadiri, I. / Puertas, F.	The effect of curing temperature on sulphate-resistant cement hydration and strength	1331-1341
Caré, Sabine	Effect of temperature on porosity and on chloride diffusion in cement pastes	1560-1573
Schubel, P. J. / Warrior, N. A. / Elliott, K. S.	Evaluation of concrete mixes and mineral additions when used with controlled permeable formwork (CPF)	1536-1542
Atici, U. / Ersoy, A.	Evaluation of destruction specific energy of fly ash and slag admixed concrete interlocking paving blocks (CIPB)	1507-1514
Sukumar, Binu / Nagamani, K. / Srinivasa Raghavan, R.	Evaluation of strength at early ages of self-compacting concrete with high volume fly ash	1394-1401
Mazzotti, C. / Savoia, M. / Ferracuti, B.	An experimental study on delamination of FRP plates bonded to concrete	1409-1421
Casuccio, M. / Torrijos, M. C. / Giaccio, G. / Zerbino, R.	Failure mechanism of recycled aggregate concrete	1500-1506
Mňahončáková, Eva / Pavlíková, Milena / Grzeszczyk, Stefania / Rovnanı´ková, Pavla / Černý, Robert	Hydric, thermal and mechanical properties of self-compacting concrete containing different fillers	1594-1600
Oehlers, D. J. / Rashid, R. / Seracino, R.	IC debonding resistance of groups of FRP NSM strips in reinforced concrete beams	1574-1582
Keskin, Hakan / Atar, Musa / Togay, Abdullah	Impacts of impregnation with Imersol-Aqua on the compression strength of some solid wood materials	1402-1408
Chaki, S. / Takarli, M. / Agbodjan, W. P.	Influence of thermal damage on physical properties of a granite rock: Porosity, permeability and ultrasonic wave evolutions	1456-1461
Schubel, P. J. / Warrior, N. A. / Elliott, K. S. / Jones, M.	An Investigation into the critical factors affecting the performance of composite controlled permeable formwork liners: Part I – Drainage medium	1551-1559
Ding, Y. / Liu, S. / Zhang, Y. / Thomas, A.	The investigation on the workability of fibre cocktail reinforced self-compacting high performance concrete	1462-1470
Shu, Xiang / Huang, Baoshan / Vukosavljevic, Dragon	Laboratory evaluation of fatigue characteristics of recycled asphalt mixture	1323-1330
Espinosa, R. M. / Franke, L. / Deckelmann, G.	Model for the mechanical stress due to the salt crystallization in porous materials	1350-1367
Özşahin, Talat Şükrü / Oruç, Şeref	Neural network model for resilient modulus of emulsified asphalt mixtures	1436-1445
Dias, W. P. S. / Seneviratne, G. A. P. S. N. / Nanayakkara, S. M. A.	Offshore sand for reinforced concrete	1377-1384
Andiç, Ö. / Yardımcı, M. Y. / Ramyar, K.	Performance of carbon, polyvinylalcohol and steel based microfibers on alkali–silica reaction expansion	1527-1531
Binici, Hanifi / Aksogan, Orhan / Görür, Ela Bahsude / Kaplan, Hasan / Bodur, Mehmet Nuri	Performance of ground blast furnace slag and ground basaltic pumice concrete against seawater attack	1515-1526
García, R. / de la Villa, R. Vigil / Vegas, I. / Frías, M. / Sánchez de Rojas, M. I.	The pozzolanic properties of paper sludge waste	1484-1490
Demir, Fuat	Prediction of elastic modulus of normal and high strength concrete by artificial neural networks	1428-1435
Demir, Fuat / Armagan Korkmaz, K.	Prediction of lower and upper bounds of elastic modulus of high strength concrete	1385-1393
Turgut, Paki	Properties of masonry blocks produced with waste limestone sawdust and glass powder	1422-1427
Lo, Tommy Y. / Cui, H. Z. / Tang, P. W. C. / Leung, H. C.	Strength analysis of bamboo by microscopic investigation of bamboo fibre	1532-1535
Özçifçi, Ayhan / Yapıcı, Fatih	Structural performance of the finger-jointed strength of some wood species with different joint configurations	1543-1550
Apostolopoulos, C. A. / Koutsoukos, P. G.	Study of the corrosion of reinforcement in concrete elements used for the repair of monuments	1583-1593
Guo, Xiao Lu / Shi, Hui Sheng	Thermal treatment and utilization of flue gas desulphurization gypsum as an admixture in cement and concrete	1471-1476
Erdem, Tahir Kemal / Kırca, Önder	Use of binary and ternary blends in high strength concrete	1477-1483

Auteur(s)

Titre

Page(s)

Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said

Alkali-activated binders: A review

1305-1314

Pacheco-Torgal, Fernando / Castro-Gomes, João / Jalali, Said

Alkali-activated binders: A review. Part 2. About materials and binders manufacture

1315-1322

Hossain, Khandaker M. Anwar

Bond characteristics of plain and deformed bars in lightweight pumice concrete

1491-1499