Construction and Building Materials - February 2019

Published:	February 2019

Articles in this Issue

Author(s)	Title	Page(s)
Yeung, Jaime S. K. / Yam, Michael C. H. / Wong, Y. L.	1-Year development trend of concrete compressive strength using Calcium Sulfoaluminate cement blended with OPC, PFA and GGBS	527-536
Chen, Di / Guo, Jintang / Xu, Yang / Hu, Miaomiao / Li, Pengpeng / Jin, Jianzhou / Yu, Yongjin	Adsorption behavior and mechanism of a copolymer used as fluid loss additive in oil well cement	650-661
Lin, Hongwei / Zhao, Yuxi / Ožbolt, Jośko / Feng, Peng / Jiang, Cheng / Eligehausen, Rolf	Analytical model for the bond stress-slip relationship of deformed bars in normal strength concrete	570-586
Fashandi, Hossein / Pakravan, Hamid Reza / Latifi, Masoud	Application of modified carpet waste cuttings for production of eco-efficient lightweight concrete	629-637
Niyigena, César / Amziane, Sofiane / Chateauneuf, Alaa	Assessing the impact of calculation methods on the variability of Young's modulus for hemp concrete material	332-344
Chen, Wen-Bo / Feng, Wei-Qiang / Yin, Jian-Hua / Borana, Lalit / Chen, Ren-Peng	Characterization of permanent axial strain of granular materials subjected to cyclic loading based on shakedown theory	751-761
Cong, Peiliang / Luo, Weihua / Xu, Peijun / Zhang, Yihan	Chemical and physical properties of hot mixing epoxy asphalt binders	1-9
Cao, Wei / Barghabany, Peyman / Mohammad, Louay / Cooper, Samuel B. / Balamurugan, Sreelatha	Chemical and rheological evaluation of asphalts incorporating RAP/RAS binders and warm-mix technologies in relation to crack resistance	256-268
Balestra, Carlos Eduardo Tino / Reichert, Thiago Alessi / Pansera, Wagner Alessandro / Savaris, Gustavo	Chloride profile modeling contemplating the convection zone based on concrete structures present for more than 40 years in different marine aggressive zones	345-358
Franco-Luján, Víctor Alberto / Maldonado-García, Marco Antonio / Mendoza-Rangel, José Manuel / Montes-Garcia, Pedro	Chloride-induced reinforcing steel corrosion in ternary concretes containing fly ash and untreated sugarcane bagasse ash	608-618
Parvathy S, Sethu / Sharma, Anil Kumar / Anand, K. B.	Comparative study on synthesis and properties of geopolymer fine aggregate from fly ashes	359-367
Falliano, Devid / De Domenico, Dario / Ricciardi, Giuseppe / Gugliandolo, Ernesto	Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density	479-493
Hou, Lijun / Zhou, Bingxuan / Guo, Shang / Aslani, Farhad / Chen, Da	Corrosion behavior and flexural performance of reinforced concrete/ultrahigh toughness cementitious composite (RC/UHTCC) beams under sustained loading and shrinkage cracking	278-287
Hu, Menghan / Han, Qiang / Xu, Kun / Du, Xiuli	Corrosion influences on monotonic properties of ultra-high-strength reinforcing steels	82-97
Hawreen, A. / Bogas, J. A.	Creep, shrinkage and mechanical properties of concrete reinforced with different types of carbon nanotubes	70-81
Niu, Dongyu / Chen, Huaxin / Kim, Y. Richard / Sheng, Yanping / Geng, Jiuguang / Guan, Bowen / Xiong, Rui / Yang, Zhengxian	Damage assessment of asphalt concrete with composite additives at the FAM–coarse aggregate interfacial zone	587-596
An, Mingzhe / Wang, Yue / Yu, Ziruo	Damage mechanisms of ultra-high-performance concrete under freeze–thaw cycling in salt solution considering the effect of rehydration	546-552
Zaumanis, Martins / Boesiger, Lukas / Kunz, Bernhard / Cavalli, Maria Chiara / Poulikakos, Lily	Determining optimum rejuvenator addition location in asphalt production plant	368-378
Mahdinia, Sahar / Eskandari-Naddaf, Hamid / Shadnia, Rasoul	Effect of cement strength class on the prediction of compressive strength of cement mortar using GEP method	27-41
Wang, Qin / Li, Shiyu / Pan, Shuo / Cui, Xinyou / Corr, David J. / Shah, Surendra P.	Effect of graphene oxide on the hydration and microstructure of fly ash-cement system	106-119
He, Tingshu / Da, Yongqi / Xu, Rongsheng / Yang, Renhe	Effect of multiple chemical activators on mechanical property of high replacement high calcium fly ash blended system	537-545
Mostofinejad, Davood / Sanginabadi, Khaled / Eftekhar, Mohammad Reza	Effects of coarse aggregate volume on CFRP-concrete bond strength and behavior	42-57
Hu, Xiaodi / Zhang, Haowen / Bai, Tao / Pan, Pan / Xu, Peiyao / Walubita, Lubinda F.	Effects of using brake pad waste powder as a filler material on the rheological and mechanical properties of a sulfur modified asphalt mixture	742-750
Kim, G. M. / Kim, Y. K. / Kim, Y. J. / Seo, J. H. / Yang, B. J. / Lee, H. K.	Enhancement of the modulus of compression of calcium silicate hydrates via covalent synthesis of CNT and silica fume	218-225
Yang, Fei / Feng, Wanhui / Liu, Feng / Jing, Lin / Yuan, Bing / Chen, De	Experimental and numerical study of rubber concrete slabs with steel reinforcement under close-in blast loading	423-436
Ameri, Mahmoud / Yeganeh, Sadegh / Erfani Valipour, Peyman	Experimental evaluation of fatigue resistance of asphalt mixtures containing waste elastomeric polymers	638-649
Otieno, Mike / Ikotun, Jacob / Ballim, Yunus	Experimental investigations on the influence of cover depth and concrete quality on time to cover cracking due to carbonation-induced corrosion of steel in RC structures in an urban, inland environment	172-181
Araya-Letelier, G. / Concha-Riedel, J. / Antico, F. C. / Sandoval, C.	Experimental mechanical-damage assessment of earthen mixes reinforced with micro polypropylene fibers	762-776
Dareyni, Mohammad / Mohammadzadeh Moghaddam, Abolfazl	Fresh and mechanical properties of roller compacted concrete containing Cationic Asphalt Emulsion admixture	226-236
Wang, Jiabin / Niu, Ditao / He, Hui	Frost durability and stress–strain relationship of lining shotcrete in cold environment	58-69
Lyu, Zhenghua / Shen, Aiqin / Qin, Xiao / Yang, Xiaolong / Li, Yue	Grey target optimization and the mechanism of cold recycled asphalt mixture with comprehensive performance	269-277
Harilal, Manu / Rathish, V. R. / Anandkumar, B. / George, R. P. / Mohammed, M. S. Haji Sheikh / Philip, John / Amarendra, G.	High performance green concrete (HPGC) with improved strength and chloride ion penetration resistance by synergistic action of fly ash, nanoparticles and corrosion inhibitor	299-312
Wang, Shunfeng / Ma, Xue / He, Liu / Zhang, Zuhua / Li, Liangfeng / Li, Yuxiang	High strength inorganic-organic polymer composites (IOPC) manufactured by mold pressing of geopolymers	501-511
Ren, Ruibo / Han, Kechao / Zhao, Pinhui / Shi, Jingtao / Zhao, Lei / Gao, Dongxing / Zhang, Zeyu / Yang, Ziqiao	Identification of asphalt fingerprints based on ATR-FTIR spectroscopy and principal component-linear discriminant analysis	662-668
Ahmad, Shamsad / Mohaisen, Khaled Own / Adekunle, Saheed Kolawole / Al-Dulaijan, Salah U. / Maslehuddin, Mohammed	Influence of admixing natural pozzolan as partial replacement of cement and microsilica in UHPC mixtures	437-444
Zheng, Bo-Tong / Dawood, Mina / Zhou, Yihui	Influence of morphological characteristics on the mechanical properties and failure mechanisms of legacy butt welds	158-171
Lekkam, Massinissa / Benmounah, Abdelbaki / Kadri, El-Hadj / Soualhi, Hamza / Kaci, Abdelhak	Influence of saturated activated carbon on the rheological and mechanical properties of cementitious materials	411-422
Zhang, Zhaocai / Ba, Hengjing / Wu, Zhenyu / Zhu, Yu	The inhibition mechanism of maize gluten meal extract as green inhibitor for steel in concrete via experimental and theoretical elucidation	288-298
da Silva Andrade, Daniel / da Silva Rêgo, João Henrique / Morais, Paulo Cesar / de Mendonça Lopes, Anne Neiry / Rojas, Moisés Frías	Investigation of C-S-H in ternary cement pastes containing nanosilica and highly-reactive supplementary cementitious materials (SCMs): Microstructure and strength	445-455
Cai, Xing / Zhang, Hong / Zhang, Jiayun / Chen, Xianhua / Yang, Jun / Hong, Jinxiang	Investigation on reinforcing mechanisms of semi-flexible pavement material through micromechanical model	732-741
Lv, Yang / Ye, Guang / De Schutter, Geert	Investigation on the potential utilization of zeolite as an internal curing agent for autogenous shrinkage mitigation and the effect of modification	669-676
Singh, Manpreet / Srivastava, Anshuman / Bhunia, Dipendu	Long term strength and durability parameters of hardened concrete on partially replacing cement by dried waste marble powder slurry	553-569
Nakarai, Kenichiro / Shitama, Koichiro / Nishio, Sohei / Sakai, Yuya / Ueda, Hiroshi / Kishi, Toshiharu	Long-term permeability measurements on site-cast concrete box culverts	777-785
Kumar, Virendra / Kumar, Amit / Prasad, Brajkishor	Mechanical behavior of non-silicate based alkali-activated ground granulated blast furnace slag	494-500
Grzymski, Filip / Musiał, Michał / Trapko, Tomasz	Mechanical properties of fibre reinforced concrete with recycled fibres	323-331
Liu, Zhixin / Li, Mingyang / Weng, Yiwei / Wong, Teck Neng / Tan, Ming Jen	Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing	245-255
Garrido, M. / Madeira, J. F. A. / Proença, M. / Correia, J. R.	Multi-objective optimization of pultruded composite sandwich panels for building floor rehabilitation	465-478
Jiang, Jinyang / Zheng, Xuejiao / Wu, Shengping / Liu, Zhiyong / Zheng, Qi	Nondestructive experimental characterization and numerical simulation on self-healing and chloride ion transport in cracked ultra-high performance concrete	696-709
Hasnaoui, Abdelaziz / Ghorbel, Elhem / Wardeh, George	Optimization approach of granulated blast furnace slag and metakaolin based geopolymer mortars	10-26
Gomes, M. Glória / Flores-Colen, Inês / Melo, Humberto / Soares, António	Physical performance of industrial and EPS and cork experimental thermal insulation renders	786-795
Mínguez, Jesús / Vicente, Miguel A. / González, Dorys C.	Pore morphology variation under ambient curing of plain and fiber-reinforced high performance mortar at an early age	718-731
Linares-Alemparte, P. / Andrade, C. / Baza, D.	Porosity and electrical resistivity-based empirical calculation of the oxygen diffusion coefficient in concrete	710-717
Szajerski, Piotr / Celinska, Joanna / Bem, Henryk / Gasiorowski, Andrzej / Anyszka, Rafal / Dziugan, Piotr	Radium content and radon exhalation rate from sulfur polymer composites (SPC) based on mineral fillers	390-398
Yang, Xiaoqiang / Yang, Hua / Zhang, Sumei	Rate-dependent constitutive models of S690 high-strength structural steel	597-607
Eidan, Javad / Rasoolan, Iraj / Rezaeian, Abbas / Poorveis, Davood	Residual mechanical properties of polypropylene fiber-reinforced concrete after heating	195-206
Obaidat, Yasmeen Taleb / Abu-Farsakh, Ghazi A. F. R. / Ashteyat, Ahmed M.	Retrofitting of partially damaged reinforced concrete beam-column joints using various plate-configurations of CFRP under cyclic loading	313-322
Galicia-Aldama, Ester / Mayorga, Miguel / Arteaga-Arcos, Juan Carlos / Romero-Salazar, Lorena	Rheological behaviour of cement paste added with natural fibres	148-157
Cao, Guodong / Li, Zhuguo / Xu, Zhisong	A SPH simulation method for opening flow of fresh concrete considering boundary restraint	379-389
Sabapathy, Karthik A. / Gedupudi, Sateesh	Straw bale based constructions: Measurement of effective thermal transport properties	182-194
Ouyang, Jian / Hu, Lijun / Yang, Wenting / Han, Baoguo	Strength improvement additives for cement bitumen emulsion mixture	456-464
Manjunath, R. / Narasimhan, Mattur C. / Umesh, K. M. / Kumar, Shivam / Bala Bharathi, U. K.	Studies on development of high performance, self-compacting alkali activated slag concrete mixes using industrial wastes	133-147
Wang, Meng / Bi, Peng	Study on seismic behavior and design method of dissipative bolted joint for steel frame with replaceable low yield point steel connected components	677-695
Mahapatra, Chinmaya Kumar / Barai, Sudhirkumar V.	Temperature impact on residual properties of self-compacting based hybrid fiber reinforced concrete with fly ash and colloidal nano silica	120-132
Zhou, Hongyu / Brooks, Adam L.	Thermal and mechanical properties of structural lightweight concrete containing lightweight aggregates and fly-ash cenospheres	512-526
Nguyen, Trong-Dung / Pham, Duc-Tho / Vu, Minh-Ngoc	Thermo-mechanically-induced thermal conductivity change and its effect on the behaviour of concrete	98-105
Wang, Yunyao / Shui, Zhonghe / Gao, Xu / Yu, Rui / Huang, Yun / Cheng, Shukai	Understanding the chloride binding and diffusion behaviors of marine concrete based on Portland limestone cement-alumina enriched pozzolans	207-217
Carmona, Sergio / Molins, Climent	Use of BCN test for controlling tension capacity of fiber reinforced shotcrete in mining works	399-410
Ribeiro, D. V. / Paula, G. R. / Morelli, M. R.	Use of microwave oven in the calcination of MgO and effect on the properties of magnesium phosphate cement	619-628
Costa, Liliana M. B. / Silva, Hugo M. R. D. / Peralta, Joana / Oliveira, Joel R. M.	Using waste polymers as a reliable alternative for asphalt binder modification – Performance and morphological assessment	237-244

About this
data sheet
IssueID
22347
Published on:
11/12/2018
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.