Construction and Building Materials - Februar 2019

Erschienen:	Februar 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Yeung, Jaime S. K. / Yam, Michael C. H. / Wong, Y. L.	1-Year development trend of concrete compressive strength using Calcium Sulfoaluminate cement blended with OPC, PFA and GGBS	527-536
Chen, Di / Guo, Jintang / Xu, Yang / Hu, Miaomiao / Li, Pengpeng / Jin, Jianzhou / Yu, Yongjin	Adsorption behavior and mechanism of a copolymer used as fluid loss additive in oil well cement	650-661
Lin, Hongwei / Zhao, Yuxi / Ožbolt, Jośko / Feng, Peng / Jiang, Cheng / Eligehausen, Rolf	Analytical model for the bond stress-slip relationship of deformed bars in normal strength concrete	570-586
Fashandi, Hossein / Pakravan, Hamid Reza / Latifi, Masoud	Application of modified carpet waste cuttings for production of eco-efficient lightweight concrete	629-637
Niyigena, César / Amziane, Sofiane / Chateauneuf, Alaa	Assessing the impact of calculation methods on the variability of Young's modulus for hemp concrete material	332-344
Chen, Wen-Bo / Feng, Wei-Qiang / Yin, Jian-Hua / Borana, Lalit / Chen, Ren-Peng	Characterization of permanent axial strain of granular materials subjected to cyclic loading based on shakedown theory	751-761
Cong, Peiliang / Luo, Weihua / Xu, Peijun / Zhang, Yihan	Chemical and physical properties of hot mixing epoxy asphalt binders	1-9
Cao, Wei / Barghabany, Peyman / Mohammad, Louay / Cooper, Samuel B. / Balamurugan, Sreelatha	Chemical and rheological evaluation of asphalts incorporating RAP/RAS binders and warm-mix technologies in relation to crack resistance	256-268
Balestra, Carlos Eduardo Tino / Reichert, Thiago Alessi / Pansera, Wagner Alessandro / Savaris, Gustavo	Chloride profile modeling contemplating the convection zone based on concrete structures present for more than 40 years in different marine aggressive zones	345-358
Franco-Luján, Víctor Alberto / Maldonado-García, Marco Antonio / Mendoza-Rangel, José Manuel / Montes-Garcia, Pedro	Chloride-induced reinforcing steel corrosion in ternary concretes containing fly ash and untreated sugarcane bagasse ash	608-618
Parvathy S, Sethu / Sharma, Anil Kumar / Anand, K. B.	Comparative study on synthesis and properties of geopolymer fine aggregate from fly ashes	359-367
Falliano, Devid / De Domenico, Dario / Ricciardi, Giuseppe / Gugliandolo, Ernesto	Compressive and flexural strength of fiber-reinforced foamed concrete: Effect of fiber content, curing conditions and dry density	479-493
Hou, Lijun / Zhou, Bingxuan / Guo, Shang / Aslani, Farhad / Chen, Da	Corrosion behavior and flexural performance of reinforced concrete/ultrahigh toughness cementitious composite (RC/UHTCC) beams under sustained loading and shrinkage cracking	278-287
Hu, Menghan / Han, Qiang / Xu, Kun / Du, Xiuli	Corrosion influences on monotonic properties of ultra-high-strength reinforcing steels	82-97
Hawreen, A. / Bogas, J. A.	Creep, shrinkage and mechanical properties of concrete reinforced with different types of carbon nanotubes	70-81
Niu, Dongyu / Chen, Huaxin / Kim, Y. Richard / Sheng, Yanping / Geng, Jiuguang / Guan, Bowen / Xiong, Rui / Yang, Zhengxian	Damage assessment of asphalt concrete with composite additives at the FAM–coarse aggregate interfacial zone	587-596
An, Mingzhe / Wang, Yue / Yu, Ziruo	Damage mechanisms of ultra-high-performance concrete under freeze–thaw cycling in salt solution considering the effect of rehydration	546-552
Zaumanis, Martins / Boesiger, Lukas / Kunz, Bernhard / Cavalli, Maria Chiara / Poulikakos, Lily	Determining optimum rejuvenator addition location in asphalt production plant	368-378
Mahdinia, Sahar / Eskandari-Naddaf, Hamid / Shadnia, Rasoul	Effect of cement strength class on the prediction of compressive strength of cement mortar using GEP method	27-41
Wang, Qin / Li, Shiyu / Pan, Shuo / Cui, Xinyou / Corr, David J. / Shah, Surendra P.	Effect of graphene oxide on the hydration and microstructure of fly ash-cement system	106-119
He, Tingshu / Da, Yongqi / Xu, Rongsheng / Yang, Renhe	Effect of multiple chemical activators on mechanical property of high replacement high calcium fly ash blended system	537-545
Mostofinejad, Davood / Sanginabadi, Khaled / Eftekhar, Mohammad Reza	Effects of coarse aggregate volume on CFRP-concrete bond strength and behavior	42-57
Hu, Xiaodi / Zhang, Haowen / Bai, Tao / Pan, Pan / Xu, Peiyao / Walubita, Lubinda F.	Effects of using brake pad waste powder as a filler material on the rheological and mechanical properties of a sulfur modified asphalt mixture	742-750
Kim, G. M. / Kim, Y. K. / Kim, Y. J. / Seo, J. H. / Yang, B. J. / Lee, H. K.	Enhancement of the modulus of compression of calcium silicate hydrates via covalent synthesis of CNT and silica fume	218-225
Yang, Fei / Feng, Wanhui / Liu, Feng / Jing, Lin / Yuan, Bing / Chen, De	Experimental and numerical study of rubber concrete slabs with steel reinforcement under close-in blast loading	423-436
Ameri, Mahmoud / Yeganeh, Sadegh / Erfani Valipour, Peyman	Experimental evaluation of fatigue resistance of asphalt mixtures containing waste elastomeric polymers	638-649
Otieno, Mike / Ikotun, Jacob / Ballim, Yunus	Experimental investigations on the influence of cover depth and concrete quality on time to cover cracking due to carbonation-induced corrosion of steel in RC structures in an urban, inland environment	172-181
Araya-Letelier, G. / Concha-Riedel, J. / Antico, F. C. / Sandoval, C.	Experimental mechanical-damage assessment of earthen mixes reinforced with micro polypropylene fibers	762-776
Dareyni, Mohammad / Mohammadzadeh Moghaddam, Abolfazl	Fresh and mechanical properties of roller compacted concrete containing Cationic Asphalt Emulsion admixture	226-236
Wang, Jiabin / Niu, Ditao / He, Hui	Frost durability and stress–strain relationship of lining shotcrete in cold environment	58-69
Lyu, Zhenghua / Shen, Aiqin / Qin, Xiao / Yang, Xiaolong / Li, Yue	Grey target optimization and the mechanism of cold recycled asphalt mixture with comprehensive performance	269-277
Harilal, Manu / Rathish, V. R. / Anandkumar, B. / George, R. P. / Mohammed, M. S. Haji Sheikh / Philip, John / Amarendra, G.	High performance green concrete (HPGC) with improved strength and chloride ion penetration resistance by synergistic action of fly ash, nanoparticles and corrosion inhibitor	299-312
Wang, Shunfeng / Ma, Xue / He, Liu / Zhang, Zuhua / Li, Liangfeng / Li, Yuxiang	High strength inorganic-organic polymer composites (IOPC) manufactured by mold pressing of geopolymers	501-511
Ren, Ruibo / Han, Kechao / Zhao, Pinhui / Shi, Jingtao / Zhao, Lei / Gao, Dongxing / Zhang, Zeyu / Yang, Ziqiao	Identification of asphalt fingerprints based on ATR-FTIR spectroscopy and principal component-linear discriminant analysis	662-668
Ahmad, Shamsad / Mohaisen, Khaled Own / Adekunle, Saheed Kolawole / Al-Dulaijan, Salah U. / Maslehuddin, Mohammed	Influence of admixing natural pozzolan as partial replacement of cement and microsilica in UHPC mixtures	437-444
Zheng, Bo-Tong / Dawood, Mina / Zhou, Yihui	Influence of morphological characteristics on the mechanical properties and failure mechanisms of legacy butt welds	158-171
Lekkam, Massinissa / Benmounah, Abdelbaki / Kadri, El-Hadj / Soualhi, Hamza / Kaci, Abdelhak	Influence of saturated activated carbon on the rheological and mechanical properties of cementitious materials	411-422
Zhang, Zhaocai / Ba, Hengjing / Wu, Zhenyu / Zhu, Yu	The inhibition mechanism of maize gluten meal extract as green inhibitor for steel in concrete via experimental and theoretical elucidation	288-298
da Silva Andrade, Daniel / da Silva Rêgo, João Henrique / Morais, Paulo Cesar / de Mendonça Lopes, Anne Neiry / Rojas, Moisés Frías	Investigation of C-S-H in ternary cement pastes containing nanosilica and highly-reactive supplementary cementitious materials (SCMs): Microstructure and strength	445-455
Cai, Xing / Zhang, Hong / Zhang, Jiayun / Chen, Xianhua / Yang, Jun / Hong, Jinxiang	Investigation on reinforcing mechanisms of semi-flexible pavement material through micromechanical model	732-741
Lv, Yang / Ye, Guang / De Schutter, Geert	Investigation on the potential utilization of zeolite as an internal curing agent for autogenous shrinkage mitigation and the effect of modification	669-676
Singh, Manpreet / Srivastava, Anshuman / Bhunia, Dipendu	Long term strength and durability parameters of hardened concrete on partially replacing cement by dried waste marble powder slurry	553-569
Nakarai, Kenichiro / Shitama, Koichiro / Nishio, Sohei / Sakai, Yuya / Ueda, Hiroshi / Kishi, Toshiharu	Long-term permeability measurements on site-cast concrete box culverts	777-785
Kumar, Virendra / Kumar, Amit / Prasad, Brajkishor	Mechanical behavior of non-silicate based alkali-activated ground granulated blast furnace slag	494-500
Grzymski, Filip / Musiał, Michał / Trapko, Tomasz	Mechanical properties of fibre reinforced concrete with recycled fibres	323-331
Liu, Zhixin / Li, Mingyang / Weng, Yiwei / Wong, Teck Neng / Tan, Ming Jen	Mixture Design Approach to optimize the rheological properties of the material used in 3D cementitious material printing	245-255
Garrido, M. / Madeira, J. F. A. / Proença, M. / Correia, J. R.	Multi-objective optimization of pultruded composite sandwich panels for building floor rehabilitation	465-478
Jiang, Jinyang / Zheng, Xuejiao / Wu, Shengping / Liu, Zhiyong / Zheng, Qi	Nondestructive experimental characterization and numerical simulation on self-healing and chloride ion transport in cracked ultra-high performance concrete	696-709
Hasnaoui, Abdelaziz / Ghorbel, Elhem / Wardeh, George	Optimization approach of granulated blast furnace slag and metakaolin based geopolymer mortars	10-26
Gomes, M. Glória / Flores-Colen, Inês / Melo, Humberto / Soares, António	Physical performance of industrial and EPS and cork experimental thermal insulation renders	786-795
Mínguez, Jesús / Vicente, Miguel A. / González, Dorys C.	Pore morphology variation under ambient curing of plain and fiber-reinforced high performance mortar at an early age	718-731
Linares-Alemparte, P. / Andrade, C. / Baza, D.	Porosity and electrical resistivity-based empirical calculation of the oxygen diffusion coefficient in concrete	710-717
Szajerski, Piotr / Celinska, Joanna / Bem, Henryk / Gasiorowski, Andrzej / Anyszka, Rafal / Dziugan, Piotr	Radium content and radon exhalation rate from sulfur polymer composites (SPC) based on mineral fillers	390-398
Yang, Xiaoqiang / Yang, Hua / Zhang, Sumei	Rate-dependent constitutive models of S690 high-strength structural steel	597-607
Eidan, Javad / Rasoolan, Iraj / Rezaeian, Abbas / Poorveis, Davood	Residual mechanical properties of polypropylene fiber-reinforced concrete after heating	195-206
Obaidat, Yasmeen Taleb / Abu-Farsakh, Ghazi A. F. R. / Ashteyat, Ahmed M.	Retrofitting of partially damaged reinforced concrete beam-column joints using various plate-configurations of CFRP under cyclic loading	313-322
Galicia-Aldama, Ester / Mayorga, Miguel / Arteaga-Arcos, Juan Carlos / Romero-Salazar, Lorena	Rheological behaviour of cement paste added with natural fibres	148-157
Cao, Guodong / Li, Zhuguo / Xu, Zhisong	A SPH simulation method for opening flow of fresh concrete considering boundary restraint	379-389
Sabapathy, Karthik A. / Gedupudi, Sateesh	Straw bale based constructions: Measurement of effective thermal transport properties	182-194
Ouyang, Jian / Hu, Lijun / Yang, Wenting / Han, Baoguo	Strength improvement additives for cement bitumen emulsion mixture	456-464
Manjunath, R. / Narasimhan, Mattur C. / Umesh, K. M. / Kumar, Shivam / Bala Bharathi, U. K.	Studies on development of high performance, self-compacting alkali activated slag concrete mixes using industrial wastes	133-147
Wang, Meng / Bi, Peng	Study on seismic behavior and design method of dissipative bolted joint for steel frame with replaceable low yield point steel connected components	677-695
Mahapatra, Chinmaya Kumar / Barai, Sudhirkumar V.	Temperature impact on residual properties of self-compacting based hybrid fiber reinforced concrete with fly ash and colloidal nano silica	120-132
Zhou, Hongyu / Brooks, Adam L.	Thermal and mechanical properties of structural lightweight concrete containing lightweight aggregates and fly-ash cenospheres	512-526
Nguyen, Trong-Dung / Pham, Duc-Tho / Vu, Minh-Ngoc	Thermo-mechanically-induced thermal conductivity change and its effect on the behaviour of concrete	98-105
Wang, Yunyao / Shui, Zhonghe / Gao, Xu / Yu, Rui / Huang, Yun / Cheng, Shukai	Understanding the chloride binding and diffusion behaviors of marine concrete based on Portland limestone cement-alumina enriched pozzolans	207-217
Carmona, Sergio / Molins, Climent	Use of BCN test for controlling tension capacity of fiber reinforced shotcrete in mining works	399-410
Ribeiro, D. V. / Paula, G. R. / Morelli, M. R.	Use of microwave oven in the calcination of MgO and effect on the properties of magnesium phosphate cement	619-628
Costa, Liliana M. B. / Silva, Hugo M. R. D. / Peralta, Joana / Oliveira, Joel R. M.	Using waste polymers as a reliable alternative for asphalt binder modification – Performance and morphological assessment	237-244

Über diese
Datenseite
IssueID
22347
Veröffentlicht am:
11.12.2018
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.