Construction and Building Materials - February 2019

Published:	February 2019

Articles in this Issue

Author(s)	Title	Page(s)
Li, Peilong / Su, Jinfei / Gao, Peng / Wu, Xu / Li, Jiange	Analysis of aggregate particle migration properties during compaction process of asphalt mixture	42-49
Gao, Xiangling / Li, Naikun / Ren, Xiaodan	Analytic solution for the bond stress-slip relationship between rebar and concrete	385-397
Ouyang, Jianshu / Chen, Xianming / Huangfu, Zehua / Lu, Cheng / Huang, Dahai / Li, Yangbo	Application of distributed temperature sensing for cracking control of mass concrete	778-791
Rashid, Khuram / Tariq, Samia / Shaukat, Waseem	Attribution of molasses dosage on fresh and hardened performance of recycled aggregate concrete	497-505
Liu, Jian / Wu, Chengqing / Li, Chunguang / Dong, Wenxue / Su, Yu / Li, Jun / Cui, Ning / Zeng, Fan / Dai, Lan / Meng, Qingfei / Pang, Jiabao	Blast testing of high performance geopolymer composite walls reinforced with steel wire mesh and aluminium foam	533-547
Deng, Mingke / Pan, Jiaojiao / Sun, Hongzhe	Bond behavior of deformed bar embedded in Engineered Cementitious Composites under cyclic loading	164-174
Tajmir-Riahi, Amir / Moshiri, Niloufar / Mostofinejad, Davood	Bond mechanism of EBROG method using a single groove to attach CFRP sheets on concrete	693-704
Nguyen, Hoang / Adesanya, Elijah / Ohenoja, Katja / Kriskova, Lubica / Pontikes, Yiannis / Kinnunen, Paivo / Illikainen, Mirja	Byproduct-based ettringite binder – A synergy between ladle slag and gypsum	143-151
Chu, S. H. / Kwan, A. K. H.	Co-addition of metakaolin and silica fume in mortar: effects and advantages	716-724
Boukhelkhal, Aboubakeur / Azzouz, Lakhdar / Kenai, Said / Kadri, El-Hadj / Benabed, Benchaa	Combined effects of mineral additions and curing conditions on strength and durability of self-compacting mortars exposed to aggressive solutions in the natural hot-dry climate in North African desert region	307-318
Velissariou, D. / Katsiotis, N. / Tsakiridis, P. / Katsiotis, M. / Pistofidis, N. / Kolovos, K. / Beazi, M.	A combined study of the performance and hydration of a Class G oil-well cement derived from Greek raw materials	63-71
Selamat, Mohd Ezwan / Hashim, Rokiah / Sulaiman, Othman / Kassim, Mohamad Haafiz Mohamad / Saharudin, Nur Izzaati / Taiwo, Owolabi Folahan Abdulwahab	Comparative study of oil palm trunk and rice husk as fillers in gypsum composite for building material	526-532
Yazıcı, Halit / Beglarigale, Ahsanollah / Tosun Felekoğlu, Kamile / Türkel, Selçuk	Comparing the alkali-silica reaction mitigation potential of admixtures by using different accelerated test methods	597-614
Mangiafico, S. / Sauzéat, C. / Di Benedetto, H.	Comparison of different blending combinations of virgin and RAP-extracted binder: Rheological simulations and statistical analysis	454-463
Howes, Ryan / Hadi, Muhammad N. S. / South, Warren	Concrete strength reduction due to over compaction	725-733
Qi, Chongchong / Chen, Qiusong / Fourie, Andy / Tang, Xiaolin / Zhang, Qinli / Dong, Xiangjian / Feng, Yan	Constitutive modelling of cemented paste backfill: A data-mining approach	262-270
Chen, Chunhui / Wu, Li / Perdjon, Michal / Huang, Xiaoyang / Peng, Yaxiong	The drying effect on xanthan gum biopolymer treated sandy soil shear strength	271-279
Gu, Chunping / Wang, Yicong / Gao, Fan / Yang, Yang / Ni, Tongyuan / Liu, Jintao / Lou, Xiaotian / Chen, Jin	Early age tensile creep of high performance concrete containing mineral admixtures: Experiments and modeling	766-777
Rahmouni, Imen / Promis, Geoffrey / R'mili, Abdelhamid / Beji, Hassen / Limam, Oualid	Effect of carbonated aggregates on the mechanical properties and thermal conductivity of eco-concrete	241-250
Alafogianni, P. / Dassios, K. / Tsakiroglou, C. D. / Matikas, T. E. / Barkoula, N. M.	Effect of CNT addition and dispersive agents on the transport properties and microstructure of cement mortars	251-261
Ghorbani, Saeid / Ghorbani, Sahar / Tao, Zhong / de Brito, Jorge / Tavakkolizadeh, Mohammadreza	Effect of magnetized water on foam stability and compressive strength of foam concrete	280-290
Lu, Dai Xuan / Saleh, Mofreh / Nguyen, Nhu H. T.	Effect of rejuvenator and mixing methods on behaviour of warm mix asphalt containing high RAP content	792-802
Wu, Qisheng / Ma, Hongen / Chen, Qiujing / Gu, Bin / Li, Shuiping / Zhu, Huajun	Effect of silane modified styrene-acrylic emulsion on the waterproof properties of flue gas desulfurization gypsum	506-512
Alanazi, Hani / Hu, Jiong / Kim, Yong-Rak	Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature	747-756
Huang, Xiao / Hu, Shuguang / Wang, Fazhou / Yang, Lu / Rao, Meijuan / Mu, Yuandong / Wang, Caixia	The effect of supplementary cementitious materials on the permeability of chloride in steam cured high-ferrite Portland cement concrete	99-106
Jiao, Zhenzhen / Wang, Ying / Zheng, Wenzhong / Huang, Wenxuan	Effect of the activator on the performance of alkali-activated slag mortars with pottery sand as fine aggregate	83-90
Celik, Kemal / Hay, Rotana / Hargis, Craig W. / Moon, Juhyuk	Effect of volcanic ash pozzolan or limestone replacement on hydration of Portland cement	803-812
Liu, Ziming / Yang, Xu / Wang, Yongdan / Luo, Sang	Engineering properties and microwave heating induced ice-melting performance of asphalt mixture with activated carbon powder filler	50-62
Costa, Bruno L. de S. / Freitas, Julio C. de O. / Melo, Dulce M. de A. / Araujo, Romero G. da S. / de Oliveira, Yvis H. / Simão, Cristina A.	Evaluation of density influence on resistance to carbonation process in oil well cement slurries	331-338
Khani Sanij, H. / Afkhamy Meybodi, P. / Amiri Hormozaky, M. / Hosseini, S. H. / Olazar, M.	Evaluation of performance and moisture sensitivity of glass-containing warm mix asphalt modified with zycothermTM as an anti-stripping additive	185-194
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Emam, Mohammed A.	Factors affecting the mechanical properties of alkali activated ground granulated blast furnace slag concrete	339-355
Iordachescu, M. / Valiente, A. / De Abreu, M.	Fatigue life assessment of a tack welded high-strength wire mesh for reinforcement of precast concrete bridge girders	421-427
Chu, L. / Fwa, T. F.	Functional sustainability of single- and double-layer porous asphalt pavements	436-443
Moutinho, Sara / Costa, Cristiana / Cerqueira, Ângela / Rocha, Fernando / Velosa, Ana	Geopolymers and polymers in the conservation of tile facades	175-184
Zheng, Zhao / Li, Yuxiang / He, Shun'ai / Ma, Xue / Zhu, Xiaoyan / Li, Siqi	High density and high strength cement-based mortar by modification with epoxy resin emulsion	319-330
Yang, Xinwen / Shu, Yao / Zhou, Shunhua / He, Chao / Di, Honggui	An implicit periodic nonlinear model for evaluating dynamic response of damaged slab track involving material nonlinearity of damage	559-575
He, Zhen / Chen, Xiaorun / Cai, Xinhua	Influence and mechanism of micro/nano-mineral admixtures on the abrasion resistance of concrete	91-98
Peng, Jianxin / Hu, Shouwang / Zhang, Jianren / Cai, C. S. / Li, Long-yuan	Influence of cracks on chloride diffusivity in concrete: A five-phase mesoscale model approach	587-596
Ahmed, Ghafur H. / Aziz, Omar Q.	Influence of intensity & eccentricity of posttensioning force and concrete strength on shear behavior of epoxied joints in segmental box girder bridges	117-129
Golewski, Grzegorz Ludwik	The influence of microcrack width on the mechanical parameters in concrete with the addition of fly ash: Consideration of technological and ecological benefits	849-861
Mboya, Hieronimi A. / Njau, Karoli N. / Mrema, Alex L. / King'ondu, Cecil K.	Influence of scoria and pumice on key performance indicators of Portland cement concrete	444-453
Cao, Yuanzhang / Guo, Liping / Chen, Bo	Influence of sulfate on the chloride diffusion mechanism in mortar	398-405
Yeih, Weichung / Chang, Jiang Jhy	The influences of cement type and curing condition on properties of pervious concrete made with electric arc furnace slag as aggregates	813-820
Jahanbakhsh, Hamid / Hosseini, Payam / Nejad, Fereidoon Moghadas / Habibi, Mehran	Intermediate temperature fracture resistance evaluation of cement emulsified asphalt mortar	1-11
Lori, Ali Rezaei / Hassani, Abolfazl / Sedghi, Reza	Investigating the mechanical and hydraulic characteristics of pervious concrete containing copper slag as coarse aggregate	130-142
Gebremichael, Negasi N. / Motahari Karein, S. Mahmoud / Karakouzian, Moses / Jadidi, Kazem	Investigation of setting time and compressive strength of ready-mixed concrete blended with returned fresh concrete	428-435
Hu, Chichun / Zhao, Jianying / Leng, Zhen / Partl, Manfred N. / Li, Rui	Laboratory evaluation of waterborne epoxy bitumen emulsion for pavement preventative maintenance application	220-227
Blanco, A. / Pardo-Bosch, F. / Cavalaro, S. / Aguado, A.	Lessons learned about the diagnosis of pathologies in concrete dams: 30 years of research and practice	356-368
Arroyo, R. / Horgnies, M. / Junco, C. / Rodríguez, A. / Calderón, V.	Lightweight structural eco-mortars made with polyurethane wastes and non-Ionic surfactants	157-163
Ngo, Tri Thuong / Park, Jun Kil / Kim, Dong joo	Loading rate effect on crack velocity in ultra-high-performance fiber-reinforced concrete	548-558
Van Steen, Charlotte / Pahlavan, Lotfollah / Wevers, Martine / Verstrynge, Els	Localisation and characterisation of corrosion damage in reinforced concrete by means of acoustic emission and X-ray computed tomography	21-29
Hu, Jia / Wu, Jin	Mechanical properties and uni-axial compression stress-strain relation of recycled coarse aggregate concrete subjected to salt-frost cycles	652-666
Wang, Dehong / Ju, Yanzhong / Shen, Hao / Xu, Libin	Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber	464-473
Ban Cheah, Chee / Lim, Jay Sern / Ramli, Mahyuddin B.	The mechanical strength and durability properties of ternary blended cementitious composites containing granite quarry dust (GQD) as natural sand replacement	291-306
Farzi, Gholamali / Lezgy-Nazargah, Mojtaba / Imani, Amin / Eidi, Mahdi / Darabi, Majid	Mechanical, thermal and microstructural properties of epoxy-OAT composites	12-20
Li, Zhen / Liu, Jiaping / Xiao, Jianzhuang / Zhong, Peihua	A method to determine water absorption of recycled fine aggregate in paste for design and quality control of fresh mortar	30-41
Agliata, Rosa / Bogaard, Thom A. / Greco, Roberto / Minardo, Aldo / Mollo, Luigi / Steele-Dunne, Susan C.	Non-invasive water content estimation in a tuff wall by DTS	821-829
Zhou, Ying / Xiao, Yi / Gu, Anqi / Zhong, Guangchun / Feng, Siyuan	Orthogonal experimental investigation of steel-PVA fiber-reinforced concrete and its uniaxial constitutive model	615-625
Al-Mosawe, Alaa / Al-Mahaidi, Riadh	Performance of CFRP-steel joints enhanced with bi-directional CFRP fabric	72-82
Young, G. / Yang, Mei	Preparation and characterization of Portland cement clinker from iron ore tailings	152-156
Mohammed, Mahmoud Khashaa / Al-Hadithi, Abdulkader Ismail / Mohammed, Marwa H.	Production and optimization of eco-efficient self compacting concrete SCC with limestone and PET	734-746
Teixeira, E. R. / Mateus, R. / Camões, A. / Branco, F. G.	Quality and durability properties and life-cycle assessment of high volume biomass fly ash mortar	195-207
White, Greg	Quantifying the impact of reclaimed asphalt pavement on airport asphalt surfaces	757-765
Long, Xiaoyong / Cai, Liangcai / Li, Wenzhe	RSM-based assessment of pavement concrete mechanical properties under joint action of corrosion, fatigue, and fiber content	406-420
Hashemi, Sajedeh Sadat Ghazizadeh / Mahmud, Hilmi Bin / Ghuan, Tan Chee / Chin, Ang Bee / Kuenzel, Carsten / Ranjbar, Navid	Safe disposal of coal bottom ash by solidification and stabilization techniques	705-715
Al-musawi, Hajir / Figueiredo, Fabio P. / Guadagnini, Maurizio / Pilakoutas, Kypros	Shrinkage properties of plain and recycled steel–fibre-reinforced rapid hardening mortars for repairs	369-384
Wang, Xiang / Liang, Zhengyu / Nie, Zhihong / Gong, Jian	Stochastic numerical model of stone-based materials with realistic stone-inclusion features	830-848
Mohammadinia, Alireza / Wong, Yat Choy / Arulrajah, Arul / Horpibulsuk, Suksun	Strength evaluation of utilizing recycled plastic waste and recycled crushed glass in concrete footpaths	489-496
Anandaraj, S. / Rooby, Jessy / Awoyera, P. O. / Gobinath, R.	Structural distress in glass fibre-reinforced concrete under loading and exposure to aggressive environments	862-870
Bouchikhi, Abdelhadi / Benzerzour, Mahfoud / Abriak, Nor-Edine / Maherzi, Walid / Mamindy-Pajany, Yannick	Study of the impact of waste glasses types on pozzolanic activity of cementitious matrix	626-640
Arain, Muhammad Fahad / Wang, Mingxue / Chen, Jianyong / Zhang, Huapeng	Study on PVA fiber surface modification for strain-hardening cementitious composites (PVA-SHCC)	107-116
Lin, Hui / Li, Yue / Li, Yaqiang	A study on the deterioration of interfacial bonding properties of chloride-contaminated reinforced concrete after electrochemical chloride extraction treatment	228-240
Gu, Lei / Bennett, Terry / Visintin, Phillip	Sulphuric acid exposure of conventional concrete and alkali-activated concrete: Assessment of test methodologies	681-692
Promis, G. / Freitas Dutra, L. / Douzane, O. / Tran Le, A. D. / Langlet, T.	Temperature-dependent sorption models for mass transfer throughout bio-based building materials	513-525
Ganesh, P. / Murthy, A. Ramachandra	Tensile behaviour and durability aspects of sustainable ultra-high performance concrete incorporated with GGBS as cementitious material	667-680
Chang, Jun / Li, Jiye / Han, Junnan / Zhang, Tingting	Traces of CH in a C₄A₃$-C₂S hydration system	641-651
Luis, Adriana / Deng, Lijun / Shao, Lisheng / Li, Huazhou (Andy)	Triaxial behaviour and image analysis of Edmonton clay treated with cement and fly ash	208-219
Al-Safy, Rawaa / Al-Mosawe, Alaa / Al-Mahaidi, Riadh	Utilization of magnetic water in cementitious adhesive for near-surface mounted CFRP strengthening system	474-488
Yu, Jun / Sasamoto, Akira / Iwata, Masahiro	Wenner method of impedance measurement for health evaluation of reinforced concrete structures	576-586

About this
data sheet
IssueID
22346
Published on:
11/12/2018
Last updated on:
26/07/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - February 2019

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - February 2019

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.