Construction and Building Materials - Februar 2019

Erschienen:	Februar 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Li, Peilong / Su, Jinfei / Gao, Peng / Wu, Xu / Li, Jiange	Analysis of aggregate particle migration properties during compaction process of asphalt mixture	42-49
Gao, Xiangling / Li, Naikun / Ren, Xiaodan	Analytic solution for the bond stress-slip relationship between rebar and concrete	385-397
Ouyang, Jianshu / Chen, Xianming / Huangfu, Zehua / Lu, Cheng / Huang, Dahai / Li, Yangbo	Application of distributed temperature sensing for cracking control of mass concrete	778-791
Rashid, Khuram / Tariq, Samia / Shaukat, Waseem	Attribution of molasses dosage on fresh and hardened performance of recycled aggregate concrete	497-505
Liu, Jian / Wu, Chengqing / Li, Chunguang / Dong, Wenxue / Su, Yu / Li, Jun / Cui, Ning / Zeng, Fan / Dai, Lan / Meng, Qingfei / Pang, Jiabao	Blast testing of high performance geopolymer composite walls reinforced with steel wire mesh and aluminium foam	533-547
Deng, Mingke / Pan, Jiaojiao / Sun, Hongzhe	Bond behavior of deformed bar embedded in Engineered Cementitious Composites under cyclic loading	164-174
Tajmir-Riahi, Amir / Moshiri, Niloufar / Mostofinejad, Davood	Bond mechanism of EBROG method using a single groove to attach CFRP sheets on concrete	693-704
Nguyen, Hoang / Adesanya, Elijah / Ohenoja, Katja / Kriskova, Lubica / Pontikes, Yiannis / Kinnunen, Paivo / Illikainen, Mirja	Byproduct-based ettringite binder – A synergy between ladle slag and gypsum	143-151
Chu, S. H. / Kwan, A. K. H.	Co-addition of metakaolin and silica fume in mortar: effects and advantages	716-724
Boukhelkhal, Aboubakeur / Azzouz, Lakhdar / Kenai, Said / Kadri, El-Hadj / Benabed, Benchaa	Combined effects of mineral additions and curing conditions on strength and durability of self-compacting mortars exposed to aggressive solutions in the natural hot-dry climate in North African desert region	307-318
Velissariou, D. / Katsiotis, N. / Tsakiridis, P. / Katsiotis, M. / Pistofidis, N. / Kolovos, K. / Beazi, M.	A combined study of the performance and hydration of a Class G oil-well cement derived from Greek raw materials	63-71
Selamat, Mohd Ezwan / Hashim, Rokiah / Sulaiman, Othman / Kassim, Mohamad Haafiz Mohamad / Saharudin, Nur Izzaati / Taiwo, Owolabi Folahan Abdulwahab	Comparative study of oil palm trunk and rice husk as fillers in gypsum composite for building material	526-532
Yazıcı, Halit / Beglarigale, Ahsanollah / Tosun Felekoğlu, Kamile / Türkel, Selçuk	Comparing the alkali-silica reaction mitigation potential of admixtures by using different accelerated test methods	597-614
Mangiafico, S. / Sauzéat, C. / Di Benedetto, H.	Comparison of different blending combinations of virgin and RAP-extracted binder: Rheological simulations and statistical analysis	454-463
Howes, Ryan / Hadi, Muhammad N. S. / South, Warren	Concrete strength reduction due to over compaction	725-733
Qi, Chongchong / Chen, Qiusong / Fourie, Andy / Tang, Xiaolin / Zhang, Qinli / Dong, Xiangjian / Feng, Yan	Constitutive modelling of cemented paste backfill: A data-mining approach	262-270
Chen, Chunhui / Wu, Li / Perdjon, Michal / Huang, Xiaoyang / Peng, Yaxiong	The drying effect on xanthan gum biopolymer treated sandy soil shear strength	271-279
Gu, Chunping / Wang, Yicong / Gao, Fan / Yang, Yang / Ni, Tongyuan / Liu, Jintao / Lou, Xiaotian / Chen, Jin	Early age tensile creep of high performance concrete containing mineral admixtures: Experiments and modeling	766-777
Rahmouni, Imen / Promis, Geoffrey / R'mili, Abdelhamid / Beji, Hassen / Limam, Oualid	Effect of carbonated aggregates on the mechanical properties and thermal conductivity of eco-concrete	241-250
Alafogianni, P. / Dassios, K. / Tsakiroglou, C. D. / Matikas, T. E. / Barkoula, N. M.	Effect of CNT addition and dispersive agents on the transport properties and microstructure of cement mortars	251-261
Ghorbani, Saeid / Ghorbani, Sahar / Tao, Zhong / de Brito, Jorge / Tavakkolizadeh, Mohammadreza	Effect of magnetized water on foam stability and compressive strength of foam concrete	280-290
Lu, Dai Xuan / Saleh, Mofreh / Nguyen, Nhu H. T.	Effect of rejuvenator and mixing methods on behaviour of warm mix asphalt containing high RAP content	792-802
Wu, Qisheng / Ma, Hongen / Chen, Qiujing / Gu, Bin / Li, Shuiping / Zhu, Huajun	Effect of silane modified styrene-acrylic emulsion on the waterproof properties of flue gas desulfurization gypsum	506-512
Alanazi, Hani / Hu, Jiong / Kim, Yong-Rak	Effect of slag, silica fume, and metakaolin on properties and performance of alkali-activated fly ash cured at ambient temperature	747-756
Huang, Xiao / Hu, Shuguang / Wang, Fazhou / Yang, Lu / Rao, Meijuan / Mu, Yuandong / Wang, Caixia	The effect of supplementary cementitious materials on the permeability of chloride in steam cured high-ferrite Portland cement concrete	99-106
Jiao, Zhenzhen / Wang, Ying / Zheng, Wenzhong / Huang, Wenxuan	Effect of the activator on the performance of alkali-activated slag mortars with pottery sand as fine aggregate	83-90
Celik, Kemal / Hay, Rotana / Hargis, Craig W. / Moon, Juhyuk	Effect of volcanic ash pozzolan or limestone replacement on hydration of Portland cement	803-812
Liu, Ziming / Yang, Xu / Wang, Yongdan / Luo, Sang	Engineering properties and microwave heating induced ice-melting performance of asphalt mixture with activated carbon powder filler	50-62
Costa, Bruno L. de S. / Freitas, Julio C. de O. / Melo, Dulce M. de A. / Araujo, Romero G. da S. / de Oliveira, Yvis H. / Simão, Cristina A.	Evaluation of density influence on resistance to carbonation process in oil well cement slurries	331-338
Khani Sanij, H. / Afkhamy Meybodi, P. / Amiri Hormozaky, M. / Hosseini, S. H. / Olazar, M.	Evaluation of performance and moisture sensitivity of glass-containing warm mix asphalt modified with zycothermTM as an anti-stripping additive	185-194
Aliabdo, Ali A. / Abd Elmoaty, Abd Elmoaty M. / Emam, Mohammed A.	Factors affecting the mechanical properties of alkali activated ground granulated blast furnace slag concrete	339-355
Iordachescu, M. / Valiente, A. / De Abreu, M.	Fatigue life assessment of a tack welded high-strength wire mesh for reinforcement of precast concrete bridge girders	421-427
Chu, L. / Fwa, T. F.	Functional sustainability of single- and double-layer porous asphalt pavements	436-443
Moutinho, Sara / Costa, Cristiana / Cerqueira, Ângela / Rocha, Fernando / Velosa, Ana	Geopolymers and polymers in the conservation of tile facades	175-184
Zheng, Zhao / Li, Yuxiang / He, Shun'ai / Ma, Xue / Zhu, Xiaoyan / Li, Siqi	High density and high strength cement-based mortar by modification with epoxy resin emulsion	319-330
Yang, Xinwen / Shu, Yao / Zhou, Shunhua / He, Chao / Di, Honggui	An implicit periodic nonlinear model for evaluating dynamic response of damaged slab track involving material nonlinearity of damage	559-575
He, Zhen / Chen, Xiaorun / Cai, Xinhua	Influence and mechanism of micro/nano-mineral admixtures on the abrasion resistance of concrete	91-98
Peng, Jianxin / Hu, Shouwang / Zhang, Jianren / Cai, C. S. / Li, Long-yuan	Influence of cracks on chloride diffusivity in concrete: A five-phase mesoscale model approach	587-596
Ahmed, Ghafur H. / Aziz, Omar Q.	Influence of intensity & eccentricity of posttensioning force and concrete strength on shear behavior of epoxied joints in segmental box girder bridges	117-129
Golewski, Grzegorz Ludwik	The influence of microcrack width on the mechanical parameters in concrete with the addition of fly ash: Consideration of technological and ecological benefits	849-861
Mboya, Hieronimi A. / Njau, Karoli N. / Mrema, Alex L. / King'ondu, Cecil K.	Influence of scoria and pumice on key performance indicators of Portland cement concrete	444-453
Cao, Yuanzhang / Guo, Liping / Chen, Bo	Influence of sulfate on the chloride diffusion mechanism in mortar	398-405
Yeih, Weichung / Chang, Jiang Jhy	The influences of cement type and curing condition on properties of pervious concrete made with electric arc furnace slag as aggregates	813-820
Jahanbakhsh, Hamid / Hosseini, Payam / Nejad, Fereidoon Moghadas / Habibi, Mehran	Intermediate temperature fracture resistance evaluation of cement emulsified asphalt mortar	1-11
Lori, Ali Rezaei / Hassani, Abolfazl / Sedghi, Reza	Investigating the mechanical and hydraulic characteristics of pervious concrete containing copper slag as coarse aggregate	130-142
Gebremichael, Negasi N. / Motahari Karein, S. Mahmoud / Karakouzian, Moses / Jadidi, Kazem	Investigation of setting time and compressive strength of ready-mixed concrete blended with returned fresh concrete	428-435
Hu, Chichun / Zhao, Jianying / Leng, Zhen / Partl, Manfred N. / Li, Rui	Laboratory evaluation of waterborne epoxy bitumen emulsion for pavement preventative maintenance application	220-227
Blanco, A. / Pardo-Bosch, F. / Cavalaro, S. / Aguado, A.	Lessons learned about the diagnosis of pathologies in concrete dams: 30 years of research and practice	356-368
Arroyo, R. / Horgnies, M. / Junco, C. / Rodríguez, A. / Calderón, V.	Lightweight structural eco-mortars made with polyurethane wastes and non-Ionic surfactants	157-163
Ngo, Tri Thuong / Park, Jun Kil / Kim, Dong joo	Loading rate effect on crack velocity in ultra-high-performance fiber-reinforced concrete	548-558
Van Steen, Charlotte / Pahlavan, Lotfollah / Wevers, Martine / Verstrynge, Els	Localisation and characterisation of corrosion damage in reinforced concrete by means of acoustic emission and X-ray computed tomography	21-29
Hu, Jia / Wu, Jin	Mechanical properties and uni-axial compression stress-strain relation of recycled coarse aggregate concrete subjected to salt-frost cycles	652-666
Wang, Dehong / Ju, Yanzhong / Shen, Hao / Xu, Libin	Mechanical properties of high performance concrete reinforced with basalt fiber and polypropylene fiber	464-473
Ban Cheah, Chee / Lim, Jay Sern / Ramli, Mahyuddin B.	The mechanical strength and durability properties of ternary blended cementitious composites containing granite quarry dust (GQD) as natural sand replacement	291-306
Farzi, Gholamali / Lezgy-Nazargah, Mojtaba / Imani, Amin / Eidi, Mahdi / Darabi, Majid	Mechanical, thermal and microstructural properties of epoxy-OAT composites	12-20
Li, Zhen / Liu, Jiaping / Xiao, Jianzhuang / Zhong, Peihua	A method to determine water absorption of recycled fine aggregate in paste for design and quality control of fresh mortar	30-41
Agliata, Rosa / Bogaard, Thom A. / Greco, Roberto / Minardo, Aldo / Mollo, Luigi / Steele-Dunne, Susan C.	Non-invasive water content estimation in a tuff wall by DTS	821-829
Zhou, Ying / Xiao, Yi / Gu, Anqi / Zhong, Guangchun / Feng, Siyuan	Orthogonal experimental investigation of steel-PVA fiber-reinforced concrete and its uniaxial constitutive model	615-625
Al-Mosawe, Alaa / Al-Mahaidi, Riadh	Performance of CFRP-steel joints enhanced with bi-directional CFRP fabric	72-82
Young, G. / Yang, Mei	Preparation and characterization of Portland cement clinker from iron ore tailings	152-156
Mohammed, Mahmoud Khashaa / Al-Hadithi, Abdulkader Ismail / Mohammed, Marwa H.	Production and optimization of eco-efficient self compacting concrete SCC with limestone and PET	734-746
Teixeira, E. R. / Mateus, R. / Camões, A. / Branco, F. G.	Quality and durability properties and life-cycle assessment of high volume biomass fly ash mortar	195-207
White, Greg	Quantifying the impact of reclaimed asphalt pavement on airport asphalt surfaces	757-765
Long, Xiaoyong / Cai, Liangcai / Li, Wenzhe	RSM-based assessment of pavement concrete mechanical properties under joint action of corrosion, fatigue, and fiber content	406-420
Hashemi, Sajedeh Sadat Ghazizadeh / Mahmud, Hilmi Bin / Ghuan, Tan Chee / Chin, Ang Bee / Kuenzel, Carsten / Ranjbar, Navid	Safe disposal of coal bottom ash by solidification and stabilization techniques	705-715
Al-musawi, Hajir / Figueiredo, Fabio P. / Guadagnini, Maurizio / Pilakoutas, Kypros	Shrinkage properties of plain and recycled steel–fibre-reinforced rapid hardening mortars for repairs	369-384
Wang, Xiang / Liang, Zhengyu / Nie, Zhihong / Gong, Jian	Stochastic numerical model of stone-based materials with realistic stone-inclusion features	830-848
Mohammadinia, Alireza / Wong, Yat Choy / Arulrajah, Arul / Horpibulsuk, Suksun	Strength evaluation of utilizing recycled plastic waste and recycled crushed glass in concrete footpaths	489-496
Anandaraj, S. / Rooby, Jessy / Awoyera, P. O. / Gobinath, R.	Structural distress in glass fibre-reinforced concrete under loading and exposure to aggressive environments	862-870
Bouchikhi, Abdelhadi / Benzerzour, Mahfoud / Abriak, Nor-Edine / Maherzi, Walid / Mamindy-Pajany, Yannick	Study of the impact of waste glasses types on pozzolanic activity of cementitious matrix	626-640
Arain, Muhammad Fahad / Wang, Mingxue / Chen, Jianyong / Zhang, Huapeng	Study on PVA fiber surface modification for strain-hardening cementitious composites (PVA-SHCC)	107-116
Lin, Hui / Li, Yue / Li, Yaqiang	A study on the deterioration of interfacial bonding properties of chloride-contaminated reinforced concrete after electrochemical chloride extraction treatment	228-240
Gu, Lei / Bennett, Terry / Visintin, Phillip	Sulphuric acid exposure of conventional concrete and alkali-activated concrete: Assessment of test methodologies	681-692
Promis, G. / Freitas Dutra, L. / Douzane, O. / Tran Le, A. D. / Langlet, T.	Temperature-dependent sorption models for mass transfer throughout bio-based building materials	513-525
Ganesh, P. / Murthy, A. Ramachandra	Tensile behaviour and durability aspects of sustainable ultra-high performance concrete incorporated with GGBS as cementitious material	667-680
Chang, Jun / Li, Jiye / Han, Junnan / Zhang, Tingting	Traces of CH in a C₄A₃$-C₂S hydration system	641-651
Luis, Adriana / Deng, Lijun / Shao, Lisheng / Li, Huazhou (Andy)	Triaxial behaviour and image analysis of Edmonton clay treated with cement and fly ash	208-219
Al-Safy, Rawaa / Al-Mosawe, Alaa / Al-Mahaidi, Riadh	Utilization of magnetic water in cementitious adhesive for near-surface mounted CFRP strengthening system	474-488
Yu, Jun / Sasamoto, Akira / Iwata, Masahiro	Wenner method of impedance measurement for health evaluation of reinforced concrete structures	576-586

Über diese
Datenseite
IssueID
22346
Veröffentlicht am:
11.12.2018
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Februar 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.