Construction and Building Materials - September 2018

Published:	September 2018

Articles in this Issue

Author(s)	Title	Page(s)
Zhang, Shenghan / Hofmann, Martin / Beyer, Katrin	A 2D typology generator for historical masonry elements	440-453
You, Lingyun / You, Zhanping / Dai, Qingli / Zhang, Lifeng	Assessment of nanoparticles dispersion in asphalt during bubble escaping and bursting: Nano hydrated lime modified foamed asphalt	391-399
Ge, Louis / Wang, Chien-Chih / Hung, Chen-Wei / Liao, Wen-Cheng / Zhao, Honghua	Assessment of strength development of slag cement stabilized kaolinite	492-501
Ruan, Yilong / Xu, Wangtu (Ato)	Causes of structural defects to bus rapid transit (BRT) facilities: Example of Xiamen BRT system	705-712
Dong, Wenlong / Xie, Luxin / Pan, Pan	A comparative study on early-stage strength development and mechanical properties of cement emulsified asphalt mixture using brake pad waste	515-523
Chen, Yue / Cen, Guoping / Cui, Yunhua	Comparative study on the effect of synthetic fiber on the preparation and durability of airport pavement concrete	34-44
Arizzi, A. / Cultrone, G.	Comparing the pozzolanic activity of aerial lime mortars made with metakaolin and fluid catalytic cracking catalyst residue: A petrographic and physical-mechanical study	382-390
Zeng, Jun-Jie / Lv, Jun-Fan / Lin, Guan / Guo, Yong-Chang / Li, Li-Juan	Compressive behavior of double-tube concrete columns with an outer square FRP tube and an inner circular high-strength steel tube	668-680
Valipour, Mahdi / Khayat, Kamal H.	Coupled effect of shrinkage-mitigating admixtures and saturated lightweight sand on shrinkage of UHPC for overlay applications	320-329
Xie, Jianhe / Zhang, Zhen / Lu, Zhongyu / Sun, Mingwei	Coupling effects of silica fume and steel-fiber on the compressive behaviour of recycled aggregate concrete after exposure to elevated temperature	752-764
Belakroum, R. / Gherfi, A. / Kadja, M. / Maalouf, C. / Lachi, M. / El Wakil, N. / Mai, T. H.	Design and properties of a new sustainable construction material based on date palm fibers and lime	330-343
Cao, Mingli / Mao, Yaqian / Khan, Mehran / Si, Wen / Shen, Shirley	Different testing methods for assessing the synthetic fiber distribution in cement-based composites	128-142
Dong, Sufen / Han, Baoguo / Yu, Xun / Ou, Jinping	Dynamic impact behaviors and constitutive model of super-fine stainless wire reinforced reactive powder concrete	602-616
Preti, Marco / Neffati, Malek / Bolis, Valentino	Earthen masonry infill walls: Use of wooden boards as sliding joints for seismic resistance	100-110
Frías, Moisés / de la Villa, Raquel Vigil / García, Rosario / Martínez, Sagrario / Villar, Ernesto / Vegas, Iñigo	Effect of a high content in activated carbon waste on low clinker cement microstructure and properties	11-19
Netinger Grubeša, Ivanka / Marković, Berislav / Gojević, Anita / Brdarić, Jelena	Effect of hemp fibers on fire resistance of concrete	473-484
Lachance-Tremblay, Éric / Perraton, Daniel / Vaillancourt, Michel / Di Benedetto, Hervé	Effect of hydrated lime on linear viscoelastic properties of asphalt mixtures with glass aggregates subjected to freeze-thaw cycles	58-67
Bui, Ngoc Kien / Satomi, Tomoaki / Takahashi, Hiroshi	Effect of mineral admixtures on properties of recycled aggregate concrete at high temperature	361-373
Vaičiukynienė, D. / Nizevičienė, D. / Kielė, A. / Janavičius, E. / Pupeikis, D.	Effect of phosphogypsum on the stability upon firing treatment of alkali-activated slag	485-491
Barbero-Barrera, M. Mar / Flores Medina, N.	The effect of polypropylene fibers on graphite-natural hydraulic lime pastes	591-601
Amin, Ali / Markić, Tomislav / Gilbert, R. Ian / Kaufmann, Walter	Effect of the boundary conditions on the Australian uniaxial tension test for softening steel fibre reinforced concrete	215-228
Wang, Song / ElGawady, Mohamed A.	Effects of combined environmental exposures and axial load on CFFT	524-535
Cardone, Fabrizio / Virgili, Amedeo / Graziani, Andrea	Evaluation of bonding between reclaimed asphalt aggregate and bitumen emulsion composites	565-574
Kim, Il Sun / Choi, So Yeong / Yang, Eun Ik	Evaluation of durability of concrete substituted heavyweight waste glass as fine aggregate	269-277
Baglieri, Orazio / Tsantilis, Lucia / Santagata, Ezio	Evaluation of healing potential of bituminous binders using a viscoelastic continuum damage approach	344-350
Kataware, Aniket V. / Singh, Dharamveer	Evaluation of intermediate temperature cracking performance of warm mix additive modified asphalt binders	165-176
Mu, Ru / Wang, Zedong / Wang, Xiaowei / Qing, Longbang / Li, Hui	Experimental study on shear properties of aligned steel fiber reinforced cement-based composites	27-33
Asgharzadeh, Seyed Mohammad / Sadeghi, Javad / Peivast, Pooneh / Pedram, Makan	Fatigue properties of crumb rubber asphalt mixtures used in railways	248-257
Imran, Mohamed / Mahendran, Mahen / Keerthan, Poologanathan	Heat transfer modelling of CFRP strengthened and insulated steel tubular columns	278-294
Ribeiro, Filipe / Sena-Cruz, José / Branco, Fernando G. / Júlio, Eduardo	Hybrid FRP jacketing for enhanced confinement of circular concrete columns in compression	681-704
Jin, Seung-Seop / Cha, Sang-Lyul / Jung, Hyung-Jo	Improvement of concrete creep prediction with probabilistic forecasting method under model uncertainty	617-633
Barbosa, W. / Ramalho, R. D'Paula / Portella, K. F.	Influence of gypsum fineness in the first hours of cement paste: Hydration kinetics and rheological behaviour	304-310
Sadrinejad, Iman / Ranjbar, Malek Mohammad / Madandoust, Rahmat	Influence of hybrid fibers on serviceability of RC beams under loading and steel corrosion	502-514
Baeza, F. J. / Galao, Ó. / Vegas, I. J. / Cano, M. / Garcés, P.	Influence of recycled slag aggregates on the conductivity and strain sensing capacity of carbon fiber reinforced cement mortars	311-319
Damdelen, O.	Investigation of 30% recycled coarse aggregate content in sustainable concrete mixes	408-418
Elyamany, Hafez E. / Abd Elmoaty, Abd Elmoaty M. / Elshaboury, Ahmed M.	Magnesium sulfate resistance of geopolymer mortar	111-127
Kong, Sih Ying / Yang, Xu / Lee, Ze Yang	Mechanical performance and numerical simulation of GFRP-concrete composite panel with circular hollow connectors and epoxy adhesion	643-654
Hu, Ji-hong / Sun, Ming-qing / Li, Jun / Wang, Ying-jun	Mechanical performances and evolution of stiffness of thin-walled strain hardening cement-based composites pipes during cyclic loading	400-407
Özkal, Fatih Mehmet / Polat, Mehmet / Yağan, Mahmud / Öztürk, Muhammed Orhan	Mechanical properties and bond strength degradation of GFRP and steel rebars at elevated temperatures	45-57
Souza, Livia / Al-Tabbaa, Abir	Microfluidic fabrication of microcapsules tailored for self-healing in cementitious materials	713-722
Zareei, Seyed Alireza / Ameri, Farshad / Bahrami, Nasrollah	Microstructure, strength, and durability of eco-friendly concretes containing sugarcane bagasse ash	258-268
Yousef, Ahmed M. / Tahwia, Ahmed M. / Marami, Nagat A.	Minimum shear reinforcement for ultra-high performance fiber reinforced concrete deep beams	177-185
Safi, Fazal R. / Hossain, Kamal / Wu, Shenghua / Al-Qadi, Imad L. / Ozer, Hasan	A model to predict creep compliance of asphalt mixtures containing recycled materials	374-381
Gul, Muhammad Aniq / Irfan, Muhammad / Ahmed, Sarfraz / Ali, Yasir / Khanzada, Shahab	Modelling and characterising the fatigue behaviour of asphaltic concrete mixtures	723-732
Alzeyadi, Ahmed / Yu, Tzuyang	Moisture determination of concrete panel using SAR imaging and the K-R-I transform	351-360
Liu, Jin-Cheng / Tan, Kang Hai / Yao, Yao	A new perspective on nature of fire-induced spalling in concrete	581-590
Yu, Yang / Li, Wengui / Li, Jianchun / Nguyen, Thuc N.	A novel optimised self-learning method for compressive strength prediction of high performance concrete	229-247
Arizzi, A. / Brümmer, M. / Martín-Sánchez, I. / Molina, E. / Cultrone, G.	Optimization of lime and clay-based hemp-concrete wall formulations for a successful lime rendering	76-86
Sonat, C. / Teo, W. W. / Unluer, C.	Performance and microstructure of MgO-SiO2 concrete under different environments	549-564
Arif, Mohmmad / Gupta, Vinayak / Choudhary, Harsh / Kumar, Sanjeev / Basu, Prarthita	Performance evaluation of cement concrete containing sandstone slurry	432-439
Liu, Lin / Qin, Sainan / Wang, Xuecheng	Poro-elastic–plastic model for cement-based materials subjected to freeze–thaw cycles	87-99
Cao, Lei / Guo, Jintang / Tian, Jianhua / Xu, Yang / Hu, Miaomiao / Wang, Meiyu / Fan, Jinjie	Preparation of Ca/Al-Layered Double Hydroxide and the influence of their structure on early strength of cement	203-214
Liao, Kuo-Wei / Wang, Yu-I / Chen, Cheng-Cheng	Probabilistic seismic performance evaluation of steel moment frame using high-strength and high-ductility steel	151-164
Park, Byoungsun / Choi, Young Cheol	Quantitative evaluation of crack self-healing in cement-based materials by absorption test	1-10
Gijbels, Katrijn / Iacobescu, Remus Ion / Pontikes, Yiannis / Vandevenne, Niels / Schreurs, Sonja / Schroeyers, Wouter	Radon immobilization potential of alkali-activated materials containing ground granulated blast furnace slag and phosphogypsum	68-75
Furlan, Ana Paula / Razakamanantsoa, Andry / Ranaivomanana, Harifidy / Levacher, Daniel / Katsumi, Takeshi	Shear strength performance of marine sediments stabilized using cement, lime and fly ash	454-463
Yu, Yuguo / Chen, Xiaojun / Gao, Wei / Li, Qingya / Wu, Di / Liu, Muyu	Stochastic leaching analysis on cementitious materials considering the influence of material uncertainty	186-202
Uchechukwu Elinwa, Augustine	Strength development of termite mound cement paste and concrete	143-150
Bazán, A. M. / Gálvez, J. C. / Reyes, E. / Galé-Lamuela, D.	Study of the rust penetration and circumferential stresses in reinforced concrete at early stages of an accelerated corrosion test by means of combined SEM, EDS and strain gauges	655-667
Zhang, Da-Wang / Wang, Dong-Min / Lin, Xi-Qiang / Zhang, Tao	The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes	575-580
Wan, Huiwen / Hu, Yong / Liu, Gang / Qu, Yuan	Study on the structure and properties of autoclaved aerated concrete produced with the stone-sawing mud	20-26
Alrefaei, Yazan / Dai, Jian-Guo	Tensile behavior and microstructure of hybrid fiber ambient cured one-part engineered geopolymer composites	419-431
Dharmawardhana, C. C. / Misra, A. / Ching, Wai-Yim	Theoretical investigation of C-(A)-S-H(I) cement hydrates	536-548
Nogueira, Carnot L. / Rens, Kevin L.	Ultrasonic wave propagation in EPS lightweight concrete and effective elastic properties	634-642
Xu, Hu / Gentilini, Cristina / Yu, Zhixiang / Wu, Hao / Zhao, Shichun	A unified model for the seismic analysis of brick masonry structures	733-751
Novais, Rui M. / Carvalheiras, J. / Senff, L. / Labrincha, J. A.	Upcycling unexplored dregs and biomass fly ash from the paper and pulp industry in the production of eco-friendly geopolymer mortars: A preliminary assessment	464-472
Kleib, J. / Aouad, G. / Louis, G. / Zakhour, M. / Boulos, M. / Rousselet, A. / Bulteel, D.	The use of calcium sulfoaluminate cement to mitigate the alkali silica reaction in mortars	295-303

About this
data sheet
IssueID
21513
Published on:
25/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.