Construction and Building Materials - septembre 2018

Publié:	septembre 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Zhang, Shenghan / Hofmann, Martin / Beyer, Katrin	A 2D typology generator for historical masonry elements	440-453
You, Lingyun / You, Zhanping / Dai, Qingli / Zhang, Lifeng	Assessment of nanoparticles dispersion in asphalt during bubble escaping and bursting: Nano hydrated lime modified foamed asphalt	391-399
Ge, Louis / Wang, Chien-Chih / Hung, Chen-Wei / Liao, Wen-Cheng / Zhao, Honghua	Assessment of strength development of slag cement stabilized kaolinite	492-501
Ruan, Yilong / Xu, Wangtu (Ato)	Causes of structural defects to bus rapid transit (BRT) facilities: Example of Xiamen BRT system	705-712
Dong, Wenlong / Xie, Luxin / Pan, Pan	A comparative study on early-stage strength development and mechanical properties of cement emulsified asphalt mixture using brake pad waste	515-523
Chen, Yue / Cen, Guoping / Cui, Yunhua	Comparative study on the effect of synthetic fiber on the preparation and durability of airport pavement concrete	34-44
Arizzi, A. / Cultrone, G.	Comparing the pozzolanic activity of aerial lime mortars made with metakaolin and fluid catalytic cracking catalyst residue: A petrographic and physical-mechanical study	382-390
Zeng, Jun-Jie / Lv, Jun-Fan / Lin, Guan / Guo, Yong-Chang / Li, Li-Juan	Compressive behavior of double-tube concrete columns with an outer square FRP tube and an inner circular high-strength steel tube	668-680
Valipour, Mahdi / Khayat, Kamal H.	Coupled effect of shrinkage-mitigating admixtures and saturated lightweight sand on shrinkage of UHPC for overlay applications	320-329
Xie, Jianhe / Zhang, Zhen / Lu, Zhongyu / Sun, Mingwei	Coupling effects of silica fume and steel-fiber on the compressive behaviour of recycled aggregate concrete after exposure to elevated temperature	752-764
Belakroum, R. / Gherfi, A. / Kadja, M. / Maalouf, C. / Lachi, M. / El Wakil, N. / Mai, T. H.	Design and properties of a new sustainable construction material based on date palm fibers and lime	330-343
Cao, Mingli / Mao, Yaqian / Khan, Mehran / Si, Wen / Shen, Shirley	Different testing methods for assessing the synthetic fiber distribution in cement-based composites	128-142
Dong, Sufen / Han, Baoguo / Yu, Xun / Ou, Jinping	Dynamic impact behaviors and constitutive model of super-fine stainless wire reinforced reactive powder concrete	602-616
Preti, Marco / Neffati, Malek / Bolis, Valentino	Earthen masonry infill walls: Use of wooden boards as sliding joints for seismic resistance	100-110
Frías, Moisés / de la Villa, Raquel Vigil / García, Rosario / Martínez, Sagrario / Villar, Ernesto / Vegas, Iñigo	Effect of a high content in activated carbon waste on low clinker cement microstructure and properties	11-19
Netinger Grubeša, Ivanka / Marković, Berislav / Gojević, Anita / Brdarić, Jelena	Effect of hemp fibers on fire resistance of concrete	473-484
Lachance-Tremblay, Éric / Perraton, Daniel / Vaillancourt, Michel / Di Benedetto, Hervé	Effect of hydrated lime on linear viscoelastic properties of asphalt mixtures with glass aggregates subjected to freeze-thaw cycles	58-67
Bui, Ngoc Kien / Satomi, Tomoaki / Takahashi, Hiroshi	Effect of mineral admixtures on properties of recycled aggregate concrete at high temperature	361-373
Vaičiukynienė, D. / Nizevičienė, D. / Kielė, A. / Janavičius, E. / Pupeikis, D.	Effect of phosphogypsum on the stability upon firing treatment of alkali-activated slag	485-491
Barbero-Barrera, M. Mar / Flores Medina, N.	The effect of polypropylene fibers on graphite-natural hydraulic lime pastes	591-601
Amin, Ali / Markić, Tomislav / Gilbert, R. Ian / Kaufmann, Walter	Effect of the boundary conditions on the Australian uniaxial tension test for softening steel fibre reinforced concrete	215-228
Wang, Song / ElGawady, Mohamed A.	Effects of combined environmental exposures and axial load on CFFT	524-535
Cardone, Fabrizio / Virgili, Amedeo / Graziani, Andrea	Evaluation of bonding between reclaimed asphalt aggregate and bitumen emulsion composites	565-574
Kim, Il Sun / Choi, So Yeong / Yang, Eun Ik	Evaluation of durability of concrete substituted heavyweight waste glass as fine aggregate	269-277
Baglieri, Orazio / Tsantilis, Lucia / Santagata, Ezio	Evaluation of healing potential of bituminous binders using a viscoelastic continuum damage approach	344-350
Kataware, Aniket V. / Singh, Dharamveer	Evaluation of intermediate temperature cracking performance of warm mix additive modified asphalt binders	165-176
Mu, Ru / Wang, Zedong / Wang, Xiaowei / Qing, Longbang / Li, Hui	Experimental study on shear properties of aligned steel fiber reinforced cement-based composites	27-33
Asgharzadeh, Seyed Mohammad / Sadeghi, Javad / Peivast, Pooneh / Pedram, Makan	Fatigue properties of crumb rubber asphalt mixtures used in railways	248-257
Imran, Mohamed / Mahendran, Mahen / Keerthan, Poologanathan	Heat transfer modelling of CFRP strengthened and insulated steel tubular columns	278-294
Ribeiro, Filipe / Sena-Cruz, José / Branco, Fernando G. / Júlio, Eduardo	Hybrid FRP jacketing for enhanced confinement of circular concrete columns in compression	681-704
Jin, Seung-Seop / Cha, Sang-Lyul / Jung, Hyung-Jo	Improvement of concrete creep prediction with probabilistic forecasting method under model uncertainty	617-633
Barbosa, W. / Ramalho, R. D'Paula / Portella, K. F.	Influence of gypsum fineness in the first hours of cement paste: Hydration kinetics and rheological behaviour	304-310
Sadrinejad, Iman / Ranjbar, Malek Mohammad / Madandoust, Rahmat	Influence of hybrid fibers on serviceability of RC beams under loading and steel corrosion	502-514
Baeza, F. J. / Galao, Ó. / Vegas, I. J. / Cano, M. / Garcés, P.	Influence of recycled slag aggregates on the conductivity and strain sensing capacity of carbon fiber reinforced cement mortars	311-319
Damdelen, O.	Investigation of 30% recycled coarse aggregate content in sustainable concrete mixes	408-418
Elyamany, Hafez E. / Abd Elmoaty, Abd Elmoaty M. / Elshaboury, Ahmed M.	Magnesium sulfate resistance of geopolymer mortar	111-127
Kong, Sih Ying / Yang, Xu / Lee, Ze Yang	Mechanical performance and numerical simulation of GFRP-concrete composite panel with circular hollow connectors and epoxy adhesion	643-654
Hu, Ji-hong / Sun, Ming-qing / Li, Jun / Wang, Ying-jun	Mechanical performances and evolution of stiffness of thin-walled strain hardening cement-based composites pipes during cyclic loading	400-407
Özkal, Fatih Mehmet / Polat, Mehmet / Yağan, Mahmud / Öztürk, Muhammed Orhan	Mechanical properties and bond strength degradation of GFRP and steel rebars at elevated temperatures	45-57
Souza, Livia / Al-Tabbaa, Abir	Microfluidic fabrication of microcapsules tailored for self-healing in cementitious materials	713-722
Zareei, Seyed Alireza / Ameri, Farshad / Bahrami, Nasrollah	Microstructure, strength, and durability of eco-friendly concretes containing sugarcane bagasse ash	258-268
Yousef, Ahmed M. / Tahwia, Ahmed M. / Marami, Nagat A.	Minimum shear reinforcement for ultra-high performance fiber reinforced concrete deep beams	177-185
Safi, Fazal R. / Hossain, Kamal / Wu, Shenghua / Al-Qadi, Imad L. / Ozer, Hasan	A model to predict creep compliance of asphalt mixtures containing recycled materials	374-381
Gul, Muhammad Aniq / Irfan, Muhammad / Ahmed, Sarfraz / Ali, Yasir / Khanzada, Shahab	Modelling and characterising the fatigue behaviour of asphaltic concrete mixtures	723-732
Alzeyadi, Ahmed / Yu, Tzuyang	Moisture determination of concrete panel using SAR imaging and the K-R-I transform	351-360
Liu, Jin-Cheng / Tan, Kang Hai / Yao, Yao	A new perspective on nature of fire-induced spalling in concrete	581-590
Yu, Yang / Li, Wengui / Li, Jianchun / Nguyen, Thuc N.	A novel optimised self-learning method for compressive strength prediction of high performance concrete	229-247
Arizzi, A. / Brümmer, M. / Martín-Sánchez, I. / Molina, E. / Cultrone, G.	Optimization of lime and clay-based hemp-concrete wall formulations for a successful lime rendering	76-86
Sonat, C. / Teo, W. W. / Unluer, C.	Performance and microstructure of MgO-SiO2 concrete under different environments	549-564
Arif, Mohmmad / Gupta, Vinayak / Choudhary, Harsh / Kumar, Sanjeev / Basu, Prarthita	Performance evaluation of cement concrete containing sandstone slurry	432-439
Liu, Lin / Qin, Sainan / Wang, Xuecheng	Poro-elastic–plastic model for cement-based materials subjected to freeze–thaw cycles	87-99
Cao, Lei / Guo, Jintang / Tian, Jianhua / Xu, Yang / Hu, Miaomiao / Wang, Meiyu / Fan, Jinjie	Preparation of Ca/Al-Layered Double Hydroxide and the influence of their structure on early strength of cement	203-214
Liao, Kuo-Wei / Wang, Yu-I / Chen, Cheng-Cheng	Probabilistic seismic performance evaluation of steel moment frame using high-strength and high-ductility steel	151-164
Park, Byoungsun / Choi, Young Cheol	Quantitative evaluation of crack self-healing in cement-based materials by absorption test	1-10
Gijbels, Katrijn / Iacobescu, Remus Ion / Pontikes, Yiannis / Vandevenne, Niels / Schreurs, Sonja / Schroeyers, Wouter	Radon immobilization potential of alkali-activated materials containing ground granulated blast furnace slag and phosphogypsum	68-75
Furlan, Ana Paula / Razakamanantsoa, Andry / Ranaivomanana, Harifidy / Levacher, Daniel / Katsumi, Takeshi	Shear strength performance of marine sediments stabilized using cement, lime and fly ash	454-463
Yu, Yuguo / Chen, Xiaojun / Gao, Wei / Li, Qingya / Wu, Di / Liu, Muyu	Stochastic leaching analysis on cementitious materials considering the influence of material uncertainty	186-202
Uchechukwu Elinwa, Augustine	Strength development of termite mound cement paste and concrete	143-150
Bazán, A. M. / Gálvez, J. C. / Reyes, E. / Galé-Lamuela, D.	Study of the rust penetration and circumferential stresses in reinforced concrete at early stages of an accelerated corrosion test by means of combined SEM, EDS and strain gauges	655-667
Zhang, Da-Wang / Wang, Dong-Min / Lin, Xi-Qiang / Zhang, Tao	The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes	575-580
Wan, Huiwen / Hu, Yong / Liu, Gang / Qu, Yuan	Study on the structure and properties of autoclaved aerated concrete produced with the stone-sawing mud	20-26
Alrefaei, Yazan / Dai, Jian-Guo	Tensile behavior and microstructure of hybrid fiber ambient cured one-part engineered geopolymer composites	419-431
Dharmawardhana, C. C. / Misra, A. / Ching, Wai-Yim	Theoretical investigation of C-(A)-S-H(I) cement hydrates	536-548
Nogueira, Carnot L. / Rens, Kevin L.	Ultrasonic wave propagation in EPS lightweight concrete and effective elastic properties	634-642
Xu, Hu / Gentilini, Cristina / Yu, Zhixiang / Wu, Hao / Zhao, Shichun	A unified model for the seismic analysis of brick masonry structures	733-751
Novais, Rui M. / Carvalheiras, J. / Senff, L. / Labrincha, J. A.	Upcycling unexplored dregs and biomass fly ash from the paper and pulp industry in the production of eco-friendly geopolymer mortars: A preliminary assessment	464-472
Kleib, J. / Aouad, G. / Louis, G. / Zakhour, M. / Boulos, M. / Rousselet, A. / Bulteel, D.	The use of calcium sulfoaluminate cement to mitigate the alkali silica reaction in mortars	295-303

Informations
sur cette fiche
IssueID
21513
Publié(e) le:
25.11.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - septembre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - septembre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.