Construction and Building Materials - September 2018

Published:	September 2018

Articles in this Issue

Author(s)	Title	Page(s)
Ling, Xing / Xiao, Hong / Cui, Xuhao	Analysis of mechanical properties of polyurethane-mixed ballast based on energy method	10-19
Caballol, David / Raposo, Álvaro P.	Analysis of the measurement of transmission loss in rigid building materials with a standing wave tube	242-248
Ibrahim, Saber / Meawad, Amr	Assessment of waste packaging glass bottles as supplementary cementitious materials	451-458
Zhou, Zhidong / Qiao, Pizhong	Bond behavior of epoxy-coated rebar in ultra-high performance concrete	406-417
Hou, Lijun / Zhou, Bingxuan / Guo, Shang / Zhuang, Ning / Chen, Da	Bond-slip behavior between pre-corroded rebar and steel fiber reinforced concrete	637-645
Bomeni, I. Y. / Njoya, A. / Ngapgue, F. / Wouatong, A. S. L. / Yongue Fouateu, R. / Kamgang Kabeyene, V. / Fagel, N.	Ceramic with potential application of ngwenfon alluvial clays (noun, west cameroon) in building construction: Mineralogy, physicochemical composition and thermal behaviour	493-503
Jacob-Vaillancourt, Colin / Sorelli, Luca	Characterization of concrete composites with recycled plastic aggregates from postconsumer material streams	561-572
Chen, Zhen / Li, Jiang-Shan / Zhan, Bao-Jian / Sharma, Usha / Poon, Chi Sun	Compressive strength and microstructural properties of dry-mixed geopolymer pastes synthesized from GGBS and sewage sludge ash	597-607
Farooqi, Muhammad Usman / Ali, Majid	Contribution of plant fibers in improving the behavior and capacity of reinforced concrete for structural applications	94-107
Bigdeli, Yasser / Barbato, Michele / Gutierrez-Wing, Maria Teresa / Lofton, Charles D. / Rusch, Kelly A. / Jung, Jongwon / Jang, Jungyeon	Development of new pH-adjusted fluorogypsum-cement-fly ash blends: Preliminary investigation of strength and durability properties	646-656
Zhou, Zilong / Cai, Xin / Ma, Dan / Chen, Lu / Wang, Shaofeng / Tan, Lihai	Dynamic tensile properties of sandstone subjected to wetting and drying cycles	215-232
Kahanji, Charles / Ali, Faris / Nadjai, Ali / Alam, Naveed	Effect of curing temperature on the behaviour of UHPFRC at elevated temperatures	670-681
Ndubuaku, Onyekachi / Liu, Xiaoben / Martens, Michael / Cheng, J. J. Roger / Adeeb, Samer	The effect of material stress-strain characteristics on the ultimate stress and critical buckling strain of flat plates subjected to uniform axial compression	346-359
Wu, Zemei / Shi, Caijun / Khayat, Kamal Henri / Xie, Linbin	Effect of SCM and nano-particles on static and dynamic mechanical properties of UHPC	118-125
Khan, Mehran / Ali, Majid	Effect of super plasticizer on the properties of medium strength concrete prepared with coconut fiber	703-715
Chen, Heng / Feng, Pan / Du, Yi / Jiang, Jinyang / Sun, Wei	The effect of superhydrophobic nano-silica particles on the transport and mechanical properties of hardened cement pastes	620-628
Gong, Chenchen / Zhou, Xiangming / Dai, Wenyan / Liu, Yu / Lu, Lingchao / Cheng, Xin	Effects of carbamide on fluidity and setting time of sulphoaluminate cement and properties of planting concrete from sulphoaluminate cement	290-297
Sikora, Pawel / Cendrowski, Krzysztof / Horszczaruk, Elzbieta / Mijowska, Ewa	The effects of Fe 3 O 4 and Fe 3 O 4 /SiO 2 nanoparticles on the mechanical properties of cement mortars exposed to elevated temperatures	441-450
Wang, Lei / Zhang, Guoxin / Wang, Pengyu / Yu, Song	Effects of fly ash and crystalline additive on mechanical properties of two-graded roller compacted concrete in a high RCC arch dam	682-690
Chen, Jun / Yao, Cheng / Wang, Hao / Ding, Yangmin / Xu, Tao	Expansion and contraction of clogged open graded friction course exposed to freeze-thaw cycles and degradation of mechanical performance	167-177
Yang, Ping / Liu, Yao-hui / Gao, Shu-wen / Li, Zhi-cheng	Experiment on sealing efficiency of carbon fiber composite grout under flowing conditions	43-51
Chen, Xingchong / Ding, Mingbo / Zhang, Xiyin / Liu, Zunwen / Ma, Huajun	Experimental investigation on seismic retrofit of gravity railway bridge pier with CFRP and steel materials	371-384
Carrascal, Isidro A. / Pérez, Alejandro / Casado, José A. / Diego, Soraya / Polanco, Juan A. / Ferreño, Diego / Martín, Juan J.	Experimental study of metal cushion pads for high speed railways	273-283
Seferoğlu, Ayşegül Güneş / Seferoğlu, Mehmet Tevfik / Akpinar, Muhammet Vefa	Experimental study on cement-treated and untreated RAP blended bases: Cyclic plate loading test	580-587
Cui, Zhaoyan / Xu, Ming / Chen, Zhongfan / Xiang, Jinhua	Experimental study on thermal performance of bamboo scrimber at elevated temperatures	178-187
Teng, Susanto / Afroughsabet, Vahid / Ostertag, Claudia P.	Flexural behavior and durability properties of high performance hybrid-fiber-reinforced concrete	504-515
Xiao, Yang / Yuan, Zhengxin / Lv, Yang / Wang, Lei / Liu, Hanlong	Fractal crushing of carbonate and quartz sands along the specimen height under impact loading	188-199
Ni, Shuna / Birely, Anna C.	Impact of physical seismic damage on the fire resistance of reinforced concrete walls	469-482
Van de Walle, Wouter / Claes, Steven / Janssen, Hans	Implementation and validation of a 3D image-based prediction model for the thermal conductivity of cellular and granular porous building blocks	427-440
Feng, Lei / Zhao, Peng / Wang, Zhenjun / Gao, Jie / Su, Xinghua / Li, Hui	Improvement of mechanical properties and chloride ion penetration resistance of cement pastes with the addition of pre-dispersed silica fume	483-492
Martins, Roseli Oliveira Guedes / Nalon, Gustavo Henrique / de Cássia Silva Sant'Ana Alvarenga, Rita / Pedroti, Leonardo Gonçalves / Ribeiro, José Carlos Lopes	Influence of blocks and grout on compressive strength and stiffness of concrete masonry prisms	233-241
Fiol, F. / Thomas, C. / Muñoz, C. / Ortega-López, V. / Manso, J. M.	The influence of recycled aggregates from precast elements on the mechanical properties of structural self-compacting concrete	309-323
Grossegger, D. / Gómez-Meijide, B. / Vansteenkiste, S. / Garcia, A.	Influence of rheological and physical bitumen properties on heat-induced self-healing of asphalt mastic beams	298-308
Zhang, Bin / Bogush, Anna / Wei, Jiangxiong / Zhang, Tongsheng / Xu, Weiting / Yu, Qijun	Influence of sulfur on the fate of heavy metals during clinkerization	144-155
López, A. J. / Pozo-Antonio, J. S. / Ramil, A. / Rivas, T.	Influence of the commercial finishes of ornamental granites on roughness, colour and reflectance	530-540
Shams, Taban / Eftekhar, Mohammadreza / Shirani, Ahmad	Investigation of gamma radiation attenuation in heavy concrete shields containing hematite and barite aggregates in multi-layered and mixed forms	35-42
Gong, Fangyuan / Liu, Yu / Zhou, Xiaodong / You, Zhanping	Lab assessment and discrete element modeling of asphalt mixture during compaction with elongated and flat coarse aggregates	573-579
Ortega, José Marcos / Letelier, Viviana / Solas, Carlos / Moriconi, Giacomo / Climent, Miguel Ángel / Sánchez, Isidro	Long-term effects of waste brick powder addition in the microstructure and service properties of mortars	691-702
Chen, Suwen / Chen, Xing / Wu, Xiqiang	The mechanical behaviour of polyvinyl butyral at intermediate strain rates and different temperatures	66-79
Esquinas, A. R. / Ledesma, E. F. / Otero, R. / Jiménez, J. R. / Fernández, J. M.	Mechanical behaviour of self-compacting concrete made with non-conforming fly ash from coal-fired power plants	385-398
Du, Yong / Peng, Jing-zhan / Liew, J. Y. Richard / Li, Gou-qiang	Mechanical properties of high tensile steel cables at elevated temperatures	52-65
Yang, Yuanyi / Deng, Yi	Mechanical properties of hybrid short fibers reinforced oil well cement by polyester fiber and calcium carbonate whisker	258-272
Yu, Jing / Chen, Yixin / Leung, Christopher K. Y.	Micromechanical modeling of crack-bridging relations of hybrid-fiber Strain-Hardening Cementitious Composites considering interaction between different fibers	629-636
Brachaczek, Waclaw	Microstructure of renovation plasters and their resistance to salt	418-426
Zhou, Yang / She, Wei / Hou, Dongshuai / Yin, Bing / Chang, Honglei / Jiang, Jinyang / Li, Jiaqi	Modification of incorporation and in-situ polymerization of aniline on the nano-structure and meso-structure of calcium silicate hydrates	459-468
Dai, Zhen / Shen, Junan / Shi, Pengcheng / Zhu, Hong / Li, Xinsheng	Nano-sized morphology of asphalt components separated from weathered asphalt binders	588-596
Sun, Yong / Wang, Zonglin / Gao, Qingfei / Liu, Chenguang	A new mixture design methodology based on the Packing Density Theory for high performance concrete in bridge engineering	80-93
Nijgh, Martin Paul / Xin, Haohui / Veljković, Milan	Non-linear hybrid homogenization method for steel-reinforced resin	324-333
Hernandez, Nicole / Lizarazo-Marriaga, Juan / Rivas, Miguel Angel	Petrographic characterization of Portlandite crystal sizes in cement pastes affected by different hydration environments	541-549
Liu, Yan / Yang, Fuwei / Zuo, Guofang / Zhang, Ruixiang / Wei, Guofeng / Ma, Qiang	Protection of the surface weathering stone artworks by a chemical conversion method	210-214
Zhou, Hao / Gu, Xiaomei / Sun, Jinfeng / Yu, Zhuqing / Huang, Hong / Wang, Qianqian / Shen, Xiaodong	Research on the formation of M1-type alite doped with MgO and SO 3 —A route to improve the quality of cement clinker with a high content of MgO	156-166
Paolini, Riccardo / Borroni, Dario / Pedeferri, MariaPia / Diamanti, Maria Vittoria	Self-cleaning building materials: The multifaceted effects of titanium dioxide	126-133
Neves, Rui / Silva, Ana / de Brito, J. / Silva, R. V.	Statistical modelling of the resistance to chloride penetration in concrete with recycled aggregates	550-560
Sangiorgi, Cesare / Tataranni, Piergiorgio / Simone, Andrea / Vignali, Valeria / Lantieri, Claudio / Dondi, Giulio	Stone mastic asphalt (SMA) with crumb rubber according to a new dry-hybrid technology: A laboratory and trial field evaluation	200-209
Wang, Zheng / Xie, Wenbo / Wang, Zhiheng / Cao, Yu	Strain method for synchronous dynamic measurement of elastic, shear modulus and Poisson's ratio of wood and wood composites	608-619
Breysse, Denys / Balayssac, Jean-Paul	Strength assessment in reinforced concrete structures: From research to improved practices	1-9
Tabatabaei, Amirhomayoon / Eslami, Abolfazl / Mohamed, Hamdy M. / Benmokrane, Brahim	Strength of compression lap-spliced GFRP bars in concrete columns with different splice lengths	657-669
Al-Negheimish, Abdulaziz I. / El-Sayed, Ahmed K. / Khanbari, Majed O. / Alhozaimy, Abdulrahman M.	Structural behavior of prestressed SCC hollow core slabs	334-345
Oliveira, R. A. / Silva, F. A. Nogueira / Sobrinho, C. W. A. Pires / Azevedo, A. C. / Delgado, J. M. P. Q. / Guimarães, A. S.	Structural performance of unreinforced masonry elements made with concrete and horizontally perforated ceramic blocks – Laboratory tests	20-34
Lu, Xiaolei / Ye, Zhengmao / Wang, Shuxian / Du, Peng / Li, Chuanhai / Cheng, Xin	Study on the preparation and properties of belite-ye'elimite-alite cement	399-405
Huang, Hong / Wang, Qiao / Li, Xuerun / Zhou, Hao / Yang, Chang-hui / Shen, Xiao-dong	Sulfate adjustment for cement with triisopropanolamine: Mechanism of early strength enhancement	516-522
Rasool, Raqiqa tur / Song, Pan / Wang, Shifeng	Thermal analysis on the interactions among asphalt modified with SBS and different degraded tire rubber	134-143
Hu, Jianjun / Sun, Qiang / Chen, Shen-En / Zhang, Weiqiang	The thermodynamic properties variation of cemented clay after treatment at high temperatures	523-529
Kumar, M. Pradeep / Mini, K. M. / Rangarajan, Murali	Ultrafine GGBS and calcium nitrate as concrete admixtures for improved mechanical properties and corrosion resistance	249-257
Zhao, Pengfei / Zsaki, Attila M. / Nokken, Michelle R.	Using digital image correlation to evaluate plastic shrinkage cracking in cement-based materials	108-117
Ahmed, Sabry A. / Metwally, Mostafa-Elnabawy A. / Zakey, Sahar E.	Utilizing industrial waste-water as alkali activator in sand-cement kiln dust bricks	284-289
Park, Sungwoo / Pour-Ghaz, Mohammad	What is the role of water in the geopolymerization of metakaolin?	360-370

About this
data sheet
IssueID
21512
Published on:
25/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.