Construction and Building Materials - septembre 2018

Publié:	septembre 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Ling, Xing / Xiao, Hong / Cui, Xuhao	Analysis of mechanical properties of polyurethane-mixed ballast based on energy method	10-19
Caballol, David / Raposo, Álvaro P.	Analysis of the measurement of transmission loss in rigid building materials with a standing wave tube	242-248
Ibrahim, Saber / Meawad, Amr	Assessment of waste packaging glass bottles as supplementary cementitious materials	451-458
Zhou, Zhidong / Qiao, Pizhong	Bond behavior of epoxy-coated rebar in ultra-high performance concrete	406-417
Hou, Lijun / Zhou, Bingxuan / Guo, Shang / Zhuang, Ning / Chen, Da	Bond-slip behavior between pre-corroded rebar and steel fiber reinforced concrete	637-645
Bomeni, I. Y. / Njoya, A. / Ngapgue, F. / Wouatong, A. S. L. / Yongue Fouateu, R. / Kamgang Kabeyene, V. / Fagel, N.	Ceramic with potential application of ngwenfon alluvial clays (noun, west cameroon) in building construction: Mineralogy, physicochemical composition and thermal behaviour	493-503
Jacob-Vaillancourt, Colin / Sorelli, Luca	Characterization of concrete composites with recycled plastic aggregates from postconsumer material streams	561-572
Chen, Zhen / Li, Jiang-Shan / Zhan, Bao-Jian / Sharma, Usha / Poon, Chi Sun	Compressive strength and microstructural properties of dry-mixed geopolymer pastes synthesized from GGBS and sewage sludge ash	597-607
Farooqi, Muhammad Usman / Ali, Majid	Contribution of plant fibers in improving the behavior and capacity of reinforced concrete for structural applications	94-107
Bigdeli, Yasser / Barbato, Michele / Gutierrez-Wing, Maria Teresa / Lofton, Charles D. / Rusch, Kelly A. / Jung, Jongwon / Jang, Jungyeon	Development of new pH-adjusted fluorogypsum-cement-fly ash blends: Preliminary investigation of strength and durability properties	646-656
Zhou, Zilong / Cai, Xin / Ma, Dan / Chen, Lu / Wang, Shaofeng / Tan, Lihai	Dynamic tensile properties of sandstone subjected to wetting and drying cycles	215-232
Kahanji, Charles / Ali, Faris / Nadjai, Ali / Alam, Naveed	Effect of curing temperature on the behaviour of UHPFRC at elevated temperatures	670-681
Ndubuaku, Onyekachi / Liu, Xiaoben / Martens, Michael / Cheng, J. J. Roger / Adeeb, Samer	The effect of material stress-strain characteristics on the ultimate stress and critical buckling strain of flat plates subjected to uniform axial compression	346-359
Wu, Zemei / Shi, Caijun / Khayat, Kamal Henri / Xie, Linbin	Effect of SCM and nano-particles on static and dynamic mechanical properties of UHPC	118-125
Khan, Mehran / Ali, Majid	Effect of super plasticizer on the properties of medium strength concrete prepared with coconut fiber	703-715
Chen, Heng / Feng, Pan / Du, Yi / Jiang, Jinyang / Sun, Wei	The effect of superhydrophobic nano-silica particles on the transport and mechanical properties of hardened cement pastes	620-628
Gong, Chenchen / Zhou, Xiangming / Dai, Wenyan / Liu, Yu / Lu, Lingchao / Cheng, Xin	Effects of carbamide on fluidity and setting time of sulphoaluminate cement and properties of planting concrete from sulphoaluminate cement	290-297
Sikora, Pawel / Cendrowski, Krzysztof / Horszczaruk, Elzbieta / Mijowska, Ewa	The effects of Fe 3 O 4 and Fe 3 O 4 /SiO 2 nanoparticles on the mechanical properties of cement mortars exposed to elevated temperatures	441-450
Wang, Lei / Zhang, Guoxin / Wang, Pengyu / Yu, Song	Effects of fly ash and crystalline additive on mechanical properties of two-graded roller compacted concrete in a high RCC arch dam	682-690
Chen, Jun / Yao, Cheng / Wang, Hao / Ding, Yangmin / Xu, Tao	Expansion and contraction of clogged open graded friction course exposed to freeze-thaw cycles and degradation of mechanical performance	167-177
Yang, Ping / Liu, Yao-hui / Gao, Shu-wen / Li, Zhi-cheng	Experiment on sealing efficiency of carbon fiber composite grout under flowing conditions	43-51
Chen, Xingchong / Ding, Mingbo / Zhang, Xiyin / Liu, Zunwen / Ma, Huajun	Experimental investigation on seismic retrofit of gravity railway bridge pier with CFRP and steel materials	371-384
Carrascal, Isidro A. / Pérez, Alejandro / Casado, José A. / Diego, Soraya / Polanco, Juan A. / Ferreño, Diego / Martín, Juan J.	Experimental study of metal cushion pads for high speed railways	273-283
Seferoğlu, Ayşegül Güneş / Seferoğlu, Mehmet Tevfik / Akpinar, Muhammet Vefa	Experimental study on cement-treated and untreated RAP blended bases: Cyclic plate loading test	580-587
Cui, Zhaoyan / Xu, Ming / Chen, Zhongfan / Xiang, Jinhua	Experimental study on thermal performance of bamboo scrimber at elevated temperatures	178-187
Teng, Susanto / Afroughsabet, Vahid / Ostertag, Claudia P.	Flexural behavior and durability properties of high performance hybrid-fiber-reinforced concrete	504-515
Xiao, Yang / Yuan, Zhengxin / Lv, Yang / Wang, Lei / Liu, Hanlong	Fractal crushing of carbonate and quartz sands along the specimen height under impact loading	188-199
Ni, Shuna / Birely, Anna C.	Impact of physical seismic damage on the fire resistance of reinforced concrete walls	469-482
Van de Walle, Wouter / Claes, Steven / Janssen, Hans	Implementation and validation of a 3D image-based prediction model for the thermal conductivity of cellular and granular porous building blocks	427-440
Feng, Lei / Zhao, Peng / Wang, Zhenjun / Gao, Jie / Su, Xinghua / Li, Hui	Improvement of mechanical properties and chloride ion penetration resistance of cement pastes with the addition of pre-dispersed silica fume	483-492
Martins, Roseli Oliveira Guedes / Nalon, Gustavo Henrique / de Cássia Silva Sant'Ana Alvarenga, Rita / Pedroti, Leonardo Gonçalves / Ribeiro, José Carlos Lopes	Influence of blocks and grout on compressive strength and stiffness of concrete masonry prisms	233-241
Fiol, F. / Thomas, C. / Muñoz, C. / Ortega-López, V. / Manso, J. M.	The influence of recycled aggregates from precast elements on the mechanical properties of structural self-compacting concrete	309-323
Grossegger, D. / Gómez-Meijide, B. / Vansteenkiste, S. / Garcia, A.	Influence of rheological and physical bitumen properties on heat-induced self-healing of asphalt mastic beams	298-308
Zhang, Bin / Bogush, Anna / Wei, Jiangxiong / Zhang, Tongsheng / Xu, Weiting / Yu, Qijun	Influence of sulfur on the fate of heavy metals during clinkerization	144-155
López, A. J. / Pozo-Antonio, J. S. / Ramil, A. / Rivas, T.	Influence of the commercial finishes of ornamental granites on roughness, colour and reflectance	530-540
Shams, Taban / Eftekhar, Mohammadreza / Shirani, Ahmad	Investigation of gamma radiation attenuation in heavy concrete shields containing hematite and barite aggregates in multi-layered and mixed forms	35-42
Gong, Fangyuan / Liu, Yu / Zhou, Xiaodong / You, Zhanping	Lab assessment and discrete element modeling of asphalt mixture during compaction with elongated and flat coarse aggregates	573-579
Ortega, José Marcos / Letelier, Viviana / Solas, Carlos / Moriconi, Giacomo / Climent, Miguel Ángel / Sánchez, Isidro	Long-term effects of waste brick powder addition in the microstructure and service properties of mortars	691-702
Chen, Suwen / Chen, Xing / Wu, Xiqiang	The mechanical behaviour of polyvinyl butyral at intermediate strain rates and different temperatures	66-79
Esquinas, A. R. / Ledesma, E. F. / Otero, R. / Jiménez, J. R. / Fernández, J. M.	Mechanical behaviour of self-compacting concrete made with non-conforming fly ash from coal-fired power plants	385-398
Du, Yong / Peng, Jing-zhan / Liew, J. Y. Richard / Li, Gou-qiang	Mechanical properties of high tensile steel cables at elevated temperatures	52-65
Yang, Yuanyi / Deng, Yi	Mechanical properties of hybrid short fibers reinforced oil well cement by polyester fiber and calcium carbonate whisker	258-272
Yu, Jing / Chen, Yixin / Leung, Christopher K. Y.	Micromechanical modeling of crack-bridging relations of hybrid-fiber Strain-Hardening Cementitious Composites considering interaction between different fibers	629-636
Brachaczek, Waclaw	Microstructure of renovation plasters and their resistance to salt	418-426
Zhou, Yang / She, Wei / Hou, Dongshuai / Yin, Bing / Chang, Honglei / Jiang, Jinyang / Li, Jiaqi	Modification of incorporation and in-situ polymerization of aniline on the nano-structure and meso-structure of calcium silicate hydrates	459-468
Dai, Zhen / Shen, Junan / Shi, Pengcheng / Zhu, Hong / Li, Xinsheng	Nano-sized morphology of asphalt components separated from weathered asphalt binders	588-596
Sun, Yong / Wang, Zonglin / Gao, Qingfei / Liu, Chenguang	A new mixture design methodology based on the Packing Density Theory for high performance concrete in bridge engineering	80-93
Nijgh, Martin Paul / Xin, Haohui / Veljković, Milan	Non-linear hybrid homogenization method for steel-reinforced resin	324-333
Hernandez, Nicole / Lizarazo-Marriaga, Juan / Rivas, Miguel Angel	Petrographic characterization of Portlandite crystal sizes in cement pastes affected by different hydration environments	541-549
Liu, Yan / Yang, Fuwei / Zuo, Guofang / Zhang, Ruixiang / Wei, Guofeng / Ma, Qiang	Protection of the surface weathering stone artworks by a chemical conversion method	210-214
Zhou, Hao / Gu, Xiaomei / Sun, Jinfeng / Yu, Zhuqing / Huang, Hong / Wang, Qianqian / Shen, Xiaodong	Research on the formation of M1-type alite doped with MgO and SO 3 —A route to improve the quality of cement clinker with a high content of MgO	156-166
Paolini, Riccardo / Borroni, Dario / Pedeferri, MariaPia / Diamanti, Maria Vittoria	Self-cleaning building materials: The multifaceted effects of titanium dioxide	126-133
Neves, Rui / Silva, Ana / de Brito, J. / Silva, R. V.	Statistical modelling of the resistance to chloride penetration in concrete with recycled aggregates	550-560
Sangiorgi, Cesare / Tataranni, Piergiorgio / Simone, Andrea / Vignali, Valeria / Lantieri, Claudio / Dondi, Giulio	Stone mastic asphalt (SMA) with crumb rubber according to a new dry-hybrid technology: A laboratory and trial field evaluation	200-209
Wang, Zheng / Xie, Wenbo / Wang, Zhiheng / Cao, Yu	Strain method for synchronous dynamic measurement of elastic, shear modulus and Poisson's ratio of wood and wood composites	608-619
Breysse, Denys / Balayssac, Jean-Paul	Strength assessment in reinforced concrete structures: From research to improved practices	1-9
Tabatabaei, Amirhomayoon / Eslami, Abolfazl / Mohamed, Hamdy M. / Benmokrane, Brahim	Strength of compression lap-spliced GFRP bars in concrete columns with different splice lengths	657-669
Al-Negheimish, Abdulaziz I. / El-Sayed, Ahmed K. / Khanbari, Majed O. / Alhozaimy, Abdulrahman M.	Structural behavior of prestressed SCC hollow core slabs	334-345
Oliveira, R. A. / Silva, F. A. Nogueira / Sobrinho, C. W. A. Pires / Azevedo, A. C. / Delgado, J. M. P. Q. / Guimarães, A. S.	Structural performance of unreinforced masonry elements made with concrete and horizontally perforated ceramic blocks – Laboratory tests	20-34
Lu, Xiaolei / Ye, Zhengmao / Wang, Shuxian / Du, Peng / Li, Chuanhai / Cheng, Xin	Study on the preparation and properties of belite-ye'elimite-alite cement	399-405
Huang, Hong / Wang, Qiao / Li, Xuerun / Zhou, Hao / Yang, Chang-hui / Shen, Xiao-dong	Sulfate adjustment for cement with triisopropanolamine: Mechanism of early strength enhancement	516-522
Rasool, Raqiqa tur / Song, Pan / Wang, Shifeng	Thermal analysis on the interactions among asphalt modified with SBS and different degraded tire rubber	134-143
Hu, Jianjun / Sun, Qiang / Chen, Shen-En / Zhang, Weiqiang	The thermodynamic properties variation of cemented clay after treatment at high temperatures	523-529
Kumar, M. Pradeep / Mini, K. M. / Rangarajan, Murali	Ultrafine GGBS and calcium nitrate as concrete admixtures for improved mechanical properties and corrosion resistance	249-257
Zhao, Pengfei / Zsaki, Attila M. / Nokken, Michelle R.	Using digital image correlation to evaluate plastic shrinkage cracking in cement-based materials	108-117
Ahmed, Sabry A. / Metwally, Mostafa-Elnabawy A. / Zakey, Sahar E.	Utilizing industrial waste-water as alkali activator in sand-cement kiln dust bricks	284-289
Park, Sungwoo / Pour-Ghaz, Mohammad	What is the role of water in the geopolymerization of metakaolin?	360-370

Informations
sur cette fiche
IssueID
21512
Publié(e) le:
25.11.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - septembre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - septembre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.