Construction and Building Materials - September 2018

Published:	September 2018

Articles in this Issue

Author(s)	Title	Page(s)
Hasan, Hayder Alaa / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Analytical investigation on the load-moment characteristics of GFRP bar reinforced circular NSC and HSC columns	605-617
Sharifi, Naser P. / Mahboub, Kamyar C.	Application of a PCM-rich concrete overlay to control thermal induced curling stresses in concrete pavements	502-512
Carvalho, Eliene Pires / Miranda, Marcela Palhares / Fernandes, Danielle S. G. / Alves, Guilherme Victor	Comparison of test methodologies to evaluate steel-concrete bond strength of thin reinforcing bar	243-252
Huang, L. / Zhang, S. S. / Yu, T. / Wang, Z. Y.	Compressive behaviour of large rupture strain FRP-confined concrete-encased steel columns	513-522
Yin, Xunzhi / Lawrence, Mike / Maskell, Daniel / Chang, Wen-Shao	Construction and monitoring of experimental straw bale building in northeast China	46-57
Rakngan, Watanyoo / Williamson, Trevor / Ferron, Raissa D. / Sant, Gaurav / Juenger, Maria C. G.	Controlling workability in alkali-activated Class C fly ash	226-233
Drossaert, F. H. / Giannopoulos, A. / Forde, M. C.	The detection of abandoned mineshafts by railway track bed using transmitted seismic waves using broadside shot gathers	88-94
Kassimi, Fodhil / Khayat, Kamal H.	Development of methodology to evaluate passing ability and test sample preparation for superworkable concrete	356-364
Karim, Mohammad Razaul / Chowdhury, Faisal I. / Zabed, Hossain / Saidur, M. R.	Effect of elevated temperatures on compressive strength and microstructure of cement paste containing palm oil clinker powder	376-383
Kasagani, Hanuma / Rao, C. B. K.	Effect of graded fibers on stress strain behaviour of Glass Fiber Reinforced Concrete in tension	592-604
Nguyen, Thuy Bich Thi / Saengsoy, Warangkana / Tangtermsirikul, Somnuk	Effect of initial moisture of wet fly ash on the workability and compressive strength of mortar and concrete	408-416
Golchin, Babak / Hamzah, Meor Othman / Omranian, Seyed Reza / Mohd Hasan, Mohd Rosli	Effects of a surfactant-wax based warm additive on high temperature rheological properties of asphalt binders	395-407
Huang, Liming / Song, Wenjuan / Li, Haoxin / Zhang, Hui / Yang, Zhenghong	Effects of aphthitalite on the formation of clinker minerals and hydration properties	275-282
Gao, Junfeng / Wang, Hainian / Bu, Yin / You, Zhanping / Mohd Hasan, Mohd Rosli / Irfan, Muhammad	Effects of coarse aggregate angularity on the microstructure of asphalt mixture	472-484
Zhao, Zhiguang / Qu, Xiaoling / Li, Fangxian / Wei, Jiangxiong	Effects of steel slag and silica fume additions on compressive strength and thermal properties of lime-fly ash pastes	439-450
Thiebaut, Yvan / Multon, Stéphane / Sellier, Alain / Lacarrière, Laurie / Boutillon, Laurent / Belili, Djemal / Linger, Lionel / Cussigh, François / Hadji, Sofiane	Effects of stress on concrete expansion due to delayed ettringite formation	626-641
Fan, Jinjie / Guo, Jintang / Chen, Di / Hu, Miaomiao / Cao, Lei / Xu, Yang / Wang, Meiyu	Effects of submicron core-shell latexes with different functional groups on the adsorption and cement hydration	127-138
Byun, Yong-Hoon / Qamhia, Issam I. A. / Feng, Bin / Tutumluer, Erol	Embedded shear wave transducer for estimating stress and modulus of As-constructed unbound aggregate base layer	465-471
Liu, Dong-sheng / Wang, Chao-qiang / Mei, Xu-dong / Zhang, Chun	Environmental performance, mechanical and microstructure analysis of non-fired bricks containing water-based drilling cuttings of shale gas	215-225
Tran, Manh Tien / Vu, Xuan Hong / Ferrier, Emmanuel	Experimental and analytical analysis of the effect of fibre treatment on the thermomechanical behaviour of continuous carbon textile subjected to simultaneous elevated temperature and uniaxial tensile loadings	32-45
Jianming, Yang / jie, Zhang / Shucong, Zheng	Experimental research on seawater erosion resistance of magnesium potassium phosphate cement pastes	534-543
Zhao, Minglei / Zhao, Mingshuang / Chen, Meihua / Li, Jie / Law, David	An experimental study on strength and toughness of steel fiber reinforced expanded-shale lightweight concrete	493-501
Elsayed, M. / Nehdi, M. L. / Provost-Smith, D. J. / Eissa, O. S.	Exploratory investigation of grouted bar-in-duct connections under direct tensile load	311-324
Du, Yunxing / Zhang, Xinying / Zhou, Fen / Zhu, Deju / Zhang, Mengmeng / Pan, Wei	Flexural behavior of basalt textile-reinforced concrete	7-21
Zhang, Junhui / Li, Jue / Yao, Yongsheng / Zheng, Jianlong / Gu, Fan	Geometric anisotropy modeling and shear behavior evaluation of graded crushed rocks	346-355
Shamsaei, Ezzatollah / de Souza, Felipe Basquiroto / Yao, Xupei / Benhelal, Emad / Akbari, Abozar / Duan, Wenhui	Graphene-based nanosheets for stronger and more durable concrete: A review	642-660
Cao, Fengze / Miao, Miao / Yan, Peiyu	Hydration characteristics and expansive mechanism of MgO expansive agents	234-242
Medjigbodo, Gildas / Roziere, Emmanuel / Charrier, Kevin / Izoret, Laurent / Loukili, Ahmed	Hydration, shrinkage, and durability of ternary binders containing Portland cement, limestone filler and metakaolin	114-126
Autelitano, Federico / Giuliani, Felice	Influence of chemical additives and wax modifiers on odor emissions of road asphalt	485-492
Hajikarimi, Pouria / Nejad, Fereidoon Moghadas / Khodaii, Ali / Fini, Ellie H.	Introducing a stress-dependent fractional nonlinear viscoelastic model for modified asphalt binders	102-113
Ataei, Shervan / Miri, Amin	Investigating dynamic amplification factor of railway masonry arch bridges through dynamic load tests	693-705
Mondal, Sandip / Ghosh, Aparna (Dey)	Investigation into the optimal bacterial concentration for compressive strength enhancement of microbial concrete	202-214
Xu, Xiong / Yu, Jianying / Wang, Ruiyang / Hu, Jinxuan / Xue, Lihui	Investigation of road performances of reaction-rejuvenated SBS modified bitumen mixture	523-533
Gong, Minghui / Yao, Zeheng / Xiong, Zijia / Yang, Jun / Hong, Jinxiang	Investigation on the influences of moisture on asphalts' micro properties by using atomic force microscopy and Fourier transform infrared spectroscopy	171-179
Xu, Yazhi / Zheng, Chuanfeng / Feng, Yupeng / Guo, Xuedong	Low-temperature cohesive and adhesive strength testing of contact surface between bitumen and mineral aggregates by image analysis	95-101
Skarżyński, Łukasz / Suchorzewski, Jan	Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography	283-299
Woszuk, Agnieszka / Panek, Rafał / Madej, Jarosław / Zofka, Adam / Franus, Wojciech	Mesoporous silica material MCM-41: Novel additive for warm mix asphalts	270-274
Fu, Chuanqing / Jin, Nanguo / Ye, Hailong / Liu, Jiamin / Jin, Xianyu	Non-uniform corrosion of steel in mortar induced by impressed current method: An experimental and numerical investigation	429-438
Zhang, Xiao-Long / Su, Jun-Feng / Guo, Yan-Dong / Wang, Xin-Yu / Fang, Yuan / Ding, Zhu / Han, Ning-Xu	Novel vascular self-nourishing and self-healing hollow fibers containing oily rejuvenator for bitumen	150-162
Feng, Jun / Song, Meili / He, Qiang / Sun, WeiWei / Wang, Lei / Luo, Kaijing	Numerical study on the hard projectile perforation on RC panels with LDPM	58-74
Khalid, F. S. / Irwan, J. M. / Ibrahim, M. H. Wan / Othman, N. / Shahidan, S.	Performance of plastic wastes in fiber-reinforced concrete beams	451-464
Hu, Jing / Qian, Zhendong	The prediction of adhesive failure between aggregates and asphalt mastic based on aggregate features	22-31
Liu, Qi / Zhang, Jiupeng / Liu, Wolong / Guo, Fucheng / Pei, Jianzhong / Zhu, Cunzhen / Zhang, Wenwu	Preparation and characterization of self-healing microcapsules embedding waterborne epoxy resin and curing agent for asphalt materials	384-394
Su, Ningyi / Xiao, Feipeng / Wang, Jingang / Cong, Lin / Amirkhanian, Serji	Productions and applications of bio-asphalts – A review	578-591
Sarani, Noor Amira / Kadir, Aeslina Abdul / Rahim, Ahmad Shayuti Abdul / Mohajerani, Abbas	Properties and environmental impact of the mosaic sludge incorporated into fired clay bricks	300-310
Garavaglia, Massimo / Bucci, Silvia / Caldognetto, Elena / Candolini, Giuseppe / Ragani, Massimo Faure / Giovani, Concettina / Magnoni, Mauro / Nuccetelli, Cristina / Peroni, Ilaria / Rusconi, Rosella / Trotti, Flavio / Verdi, Luca	Radiological aspects for use of woodchip ashes in building industry	264-269
Al-Hubail, Jamal / Al-Azmi, Darwish	Radiological assessment of indoor radon concentrations and gamma dose rates in secondary school buildings in Kuwait	1-6
Zhong, Rui / Leng, Zhen / Poon, Chi-Sun	Research and application of pervious concrete as a sustainable pavement material: A state-of-the-art and state-of-the-practice review	544-553
Ledesma, E. F. / Lozano-Lunar, A. / Ayuso, J. / Galvin, A. P. / Fernández, J. M. / Jiménez, J. R.	The role of pH on leaching of heavy metals and chlorides from electric arc furnace dust in cement-based mortars	365-375
Adhikary, Satadru Das / Chandra, Lado Riannevo / Christian, Abraham / Ong, Khim Chye Gary	SHCC-strengthened RC panels under near-field explosions	675-692
Zhou, Lu / Huang, Weidong / Xiao, Feipeng / Lv, Quan	Shear adhesion evaluation of various modified asphalt binders by an innovative testing method	253-263
Pourbaba, Masoud / Joghataie, Abdolreza / Mirmiran, Amir	Shear behavior of ultra-high performance concrete	554-564
Kim, Sang Yeob / Hong, Won-Taek / Lee, Jong-Sub	Silt fraction effects of frozen soils on frozen water content, strength, and stiffness	565-577
Vaculik, J. / Visintin, P. / Burton, N. G. / Griffith, M. C. / Seracino, R.	State-of-the-art review and future research directions for FRP-to-masonry bond research: Test methods and techniques for extraction of bond-slip behaviour	325-345
Lehner, Petr / Ghosh, Pratanu / Konečný, Petr	Statistical analysis of time dependent variation of diffusion coefficient for various binary and ternary based concrete mixtures	75-87
Nakanishi, Erika Yukari / Cabral, Matheus Roberto / Fiorelli, Juliano / dos Santos, Valdemir / Christoforo, André Luís / Savastano Junior, Holmer	Study of the production process of 3-layer sugarcane-bamboo-based particleboards	618-625
Chi, Kai-Ning / Chiu, Chien-Kuo / Lin, Ker-Chun	Study on straight development length of tensile threaded bars in high-strength reinforced concrete members	661-674
Zhang, Hongzhi / Savija, Branko / Schlangen, Erik	Towards understanding stochastic fracture performance of cement paste at micro length scale based on numerical simulation	189-201
Tang, Yongjing / Shao, Zhendong / Xu, Tianlong	Uniaxial compressive tests on ancient brick masonry from heritage buildings under unsaturated freeze-thaw conditions	706-715
Wi, Kwangwoo / Lee, Han-Seung / Lim, Seungmin / Song, Hun / Hussin, Mohd Warid / Ismail, Mohamed A.	Use of an agricultural by-product, nano sized Palm Oil Fuel Ash as a supplementary cementitious material	139-149
Pourabbas Bilondi, Meysam / Toufigh, Mohammad Mohsen / Toufigh, Vahid	Using calcium carbide residue as an alkaline activator for glass powder–clay geopolymer	417-428
Moodi, Yaser / Mousavi, Seyed Roohollah / Ghavidel, Alireza / Sohrabi, Mohammad Reza / Rashki, Mohsen	Using Response Surface Methodology and providing a modified model using whale algorithm for estimating the compressive strength of columns confined with FRP sheets	163-170
Hu, Jiezhen / Deng, Peichang / Li, Xiaogang / Zhang, Jibiao / Wang, Gui	The vertical Non-uniform corrosion of Reinforced concrete exposed to the marine environments	180-188

About this
data sheet
IssueID
21511
Published on:
25/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - September 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - September 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.