Construction and Building Materials - September 2018

Erschienen:	September 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Hasan, Hayder Alaa / Sheikh, M. Neaz / Hadi, Muhammad N. S.	Analytical investigation on the load-moment characteristics of GFRP bar reinforced circular NSC and HSC columns	605-617
Sharifi, Naser P. / Mahboub, Kamyar C.	Application of a PCM-rich concrete overlay to control thermal induced curling stresses in concrete pavements	502-512
Carvalho, Eliene Pires / Miranda, Marcela Palhares / Fernandes, Danielle S. G. / Alves, Guilherme Victor	Comparison of test methodologies to evaluate steel-concrete bond strength of thin reinforcing bar	243-252
Huang, L. / Zhang, S. S. / Yu, T. / Wang, Z. Y.	Compressive behaviour of large rupture strain FRP-confined concrete-encased steel columns	513-522
Yin, Xunzhi / Lawrence, Mike / Maskell, Daniel / Chang, Wen-Shao	Construction and monitoring of experimental straw bale building in northeast China	46-57
Rakngan, Watanyoo / Williamson, Trevor / Ferron, Raissa D. / Sant, Gaurav / Juenger, Maria C. G.	Controlling workability in alkali-activated Class C fly ash	226-233
Drossaert, F. H. / Giannopoulos, A. / Forde, M. C.	The detection of abandoned mineshafts by railway track bed using transmitted seismic waves using broadside shot gathers	88-94
Kassimi, Fodhil / Khayat, Kamal H.	Development of methodology to evaluate passing ability and test sample preparation for superworkable concrete	356-364
Karim, Mohammad Razaul / Chowdhury, Faisal I. / Zabed, Hossain / Saidur, M. R.	Effect of elevated temperatures on compressive strength and microstructure of cement paste containing palm oil clinker powder	376-383
Kasagani, Hanuma / Rao, C. B. K.	Effect of graded fibers on stress strain behaviour of Glass Fiber Reinforced Concrete in tension	592-604
Nguyen, Thuy Bich Thi / Saengsoy, Warangkana / Tangtermsirikul, Somnuk	Effect of initial moisture of wet fly ash on the workability and compressive strength of mortar and concrete	408-416
Golchin, Babak / Hamzah, Meor Othman / Omranian, Seyed Reza / Mohd Hasan, Mohd Rosli	Effects of a surfactant-wax based warm additive on high temperature rheological properties of asphalt binders	395-407
Huang, Liming / Song, Wenjuan / Li, Haoxin / Zhang, Hui / Yang, Zhenghong	Effects of aphthitalite on the formation of clinker minerals and hydration properties	275-282
Gao, Junfeng / Wang, Hainian / Bu, Yin / You, Zhanping / Mohd Hasan, Mohd Rosli / Irfan, Muhammad	Effects of coarse aggregate angularity on the microstructure of asphalt mixture	472-484
Zhao, Zhiguang / Qu, Xiaoling / Li, Fangxian / Wei, Jiangxiong	Effects of steel slag and silica fume additions on compressive strength and thermal properties of lime-fly ash pastes	439-450
Thiebaut, Yvan / Multon, Stéphane / Sellier, Alain / Lacarrière, Laurie / Boutillon, Laurent / Belili, Djemal / Linger, Lionel / Cussigh, François / Hadji, Sofiane	Effects of stress on concrete expansion due to delayed ettringite formation	626-641
Fan, Jinjie / Guo, Jintang / Chen, Di / Hu, Miaomiao / Cao, Lei / Xu, Yang / Wang, Meiyu	Effects of submicron core-shell latexes with different functional groups on the adsorption and cement hydration	127-138
Byun, Yong-Hoon / Qamhia, Issam I. A. / Feng, Bin / Tutumluer, Erol	Embedded shear wave transducer for estimating stress and modulus of As-constructed unbound aggregate base layer	465-471
Liu, Dong-sheng / Wang, Chao-qiang / Mei, Xu-dong / Zhang, Chun	Environmental performance, mechanical and microstructure analysis of non-fired bricks containing water-based drilling cuttings of shale gas	215-225
Tran, Manh Tien / Vu, Xuan Hong / Ferrier, Emmanuel	Experimental and analytical analysis of the effect of fibre treatment on the thermomechanical behaviour of continuous carbon textile subjected to simultaneous elevated temperature and uniaxial tensile loadings	32-45
Jianming, Yang / jie, Zhang / Shucong, Zheng	Experimental research on seawater erosion resistance of magnesium potassium phosphate cement pastes	534-543
Zhao, Minglei / Zhao, Mingshuang / Chen, Meihua / Li, Jie / Law, David	An experimental study on strength and toughness of steel fiber reinforced expanded-shale lightweight concrete	493-501
Elsayed, M. / Nehdi, M. L. / Provost-Smith, D. J. / Eissa, O. S.	Exploratory investigation of grouted bar-in-duct connections under direct tensile load	311-324
Du, Yunxing / Zhang, Xinying / Zhou, Fen / Zhu, Deju / Zhang, Mengmeng / Pan, Wei	Flexural behavior of basalt textile-reinforced concrete	7-21
Zhang, Junhui / Li, Jue / Yao, Yongsheng / Zheng, Jianlong / Gu, Fan	Geometric anisotropy modeling and shear behavior evaluation of graded crushed rocks	346-355
Shamsaei, Ezzatollah / de Souza, Felipe Basquiroto / Yao, Xupei / Benhelal, Emad / Akbari, Abozar / Duan, Wenhui	Graphene-based nanosheets for stronger and more durable concrete: A review	642-660
Cao, Fengze / Miao, Miao / Yan, Peiyu	Hydration characteristics and expansive mechanism of MgO expansive agents	234-242
Medjigbodo, Gildas / Roziere, Emmanuel / Charrier, Kevin / Izoret, Laurent / Loukili, Ahmed	Hydration, shrinkage, and durability of ternary binders containing Portland cement, limestone filler and metakaolin	114-126
Autelitano, Federico / Giuliani, Felice	Influence of chemical additives and wax modifiers on odor emissions of road asphalt	485-492
Hajikarimi, Pouria / Nejad, Fereidoon Moghadas / Khodaii, Ali / Fini, Ellie H.	Introducing a stress-dependent fractional nonlinear viscoelastic model for modified asphalt binders	102-113
Ataei, Shervan / Miri, Amin	Investigating dynamic amplification factor of railway masonry arch bridges through dynamic load tests	693-705
Mondal, Sandip / Ghosh, Aparna (Dey)	Investigation into the optimal bacterial concentration for compressive strength enhancement of microbial concrete	202-214
Xu, Xiong / Yu, Jianying / Wang, Ruiyang / Hu, Jinxuan / Xue, Lihui	Investigation of road performances of reaction-rejuvenated SBS modified bitumen mixture	523-533
Gong, Minghui / Yao, Zeheng / Xiong, Zijia / Yang, Jun / Hong, Jinxiang	Investigation on the influences of moisture on asphalts' micro properties by using atomic force microscopy and Fourier transform infrared spectroscopy	171-179
Xu, Yazhi / Zheng, Chuanfeng / Feng, Yupeng / Guo, Xuedong	Low-temperature cohesive and adhesive strength testing of contact surface between bitumen and mineral aggregates by image analysis	95-101
Skarżyński, Łukasz / Suchorzewski, Jan	Mechanical and fracture properties of concrete reinforced with recycled and industrial steel fibers using Digital Image Correlation technique and X-ray micro computed tomography	283-299
Woszuk, Agnieszka / Panek, Rafał / Madej, Jarosław / Zofka, Adam / Franus, Wojciech	Mesoporous silica material MCM-41: Novel additive for warm mix asphalts	270-274
Fu, Chuanqing / Jin, Nanguo / Ye, Hailong / Liu, Jiamin / Jin, Xianyu	Non-uniform corrosion of steel in mortar induced by impressed current method: An experimental and numerical investigation	429-438
Zhang, Xiao-Long / Su, Jun-Feng / Guo, Yan-Dong / Wang, Xin-Yu / Fang, Yuan / Ding, Zhu / Han, Ning-Xu	Novel vascular self-nourishing and self-healing hollow fibers containing oily rejuvenator for bitumen	150-162
Feng, Jun / Song, Meili / He, Qiang / Sun, WeiWei / Wang, Lei / Luo, Kaijing	Numerical study on the hard projectile perforation on RC panels with LDPM	58-74
Khalid, F. S. / Irwan, J. M. / Ibrahim, M. H. Wan / Othman, N. / Shahidan, S.	Performance of plastic wastes in fiber-reinforced concrete beams	451-464
Hu, Jing / Qian, Zhendong	The prediction of adhesive failure between aggregates and asphalt mastic based on aggregate features	22-31
Liu, Qi / Zhang, Jiupeng / Liu, Wolong / Guo, Fucheng / Pei, Jianzhong / Zhu, Cunzhen / Zhang, Wenwu	Preparation and characterization of self-healing microcapsules embedding waterborne epoxy resin and curing agent for asphalt materials	384-394
Su, Ningyi / Xiao, Feipeng / Wang, Jingang / Cong, Lin / Amirkhanian, Serji	Productions and applications of bio-asphalts – A review	578-591
Sarani, Noor Amira / Kadir, Aeslina Abdul / Rahim, Ahmad Shayuti Abdul / Mohajerani, Abbas	Properties and environmental impact of the mosaic sludge incorporated into fired clay bricks	300-310
Garavaglia, Massimo / Bucci, Silvia / Caldognetto, Elena / Candolini, Giuseppe / Ragani, Massimo Faure / Giovani, Concettina / Magnoni, Mauro / Nuccetelli, Cristina / Peroni, Ilaria / Rusconi, Rosella / Trotti, Flavio / Verdi, Luca	Radiological aspects for use of woodchip ashes in building industry	264-269
Al-Hubail, Jamal / Al-Azmi, Darwish	Radiological assessment of indoor radon concentrations and gamma dose rates in secondary school buildings in Kuwait	1-6
Zhong, Rui / Leng, Zhen / Poon, Chi-Sun	Research and application of pervious concrete as a sustainable pavement material: A state-of-the-art and state-of-the-practice review	544-553
Ledesma, E. F. / Lozano-Lunar, A. / Ayuso, J. / Galvin, A. P. / Fernández, J. M. / Jiménez, J. R.	The role of pH on leaching of heavy metals and chlorides from electric arc furnace dust in cement-based mortars	365-375
Adhikary, Satadru Das / Chandra, Lado Riannevo / Christian, Abraham / Ong, Khim Chye Gary	SHCC-strengthened RC panels under near-field explosions	675-692
Zhou, Lu / Huang, Weidong / Xiao, Feipeng / Lv, Quan	Shear adhesion evaluation of various modified asphalt binders by an innovative testing method	253-263
Pourbaba, Masoud / Joghataie, Abdolreza / Mirmiran, Amir	Shear behavior of ultra-high performance concrete	554-564
Kim, Sang Yeob / Hong, Won-Taek / Lee, Jong-Sub	Silt fraction effects of frozen soils on frozen water content, strength, and stiffness	565-577
Vaculik, J. / Visintin, P. / Burton, N. G. / Griffith, M. C. / Seracino, R.	State-of-the-art review and future research directions for FRP-to-masonry bond research: Test methods and techniques for extraction of bond-slip behaviour	325-345
Lehner, Petr / Ghosh, Pratanu / Konečný, Petr	Statistical analysis of time dependent variation of diffusion coefficient for various binary and ternary based concrete mixtures	75-87
Nakanishi, Erika Yukari / Cabral, Matheus Roberto / Fiorelli, Juliano / dos Santos, Valdemir / Christoforo, André Luís / Savastano Junior, Holmer	Study of the production process of 3-layer sugarcane-bamboo-based particleboards	618-625
Chi, Kai-Ning / Chiu, Chien-Kuo / Lin, Ker-Chun	Study on straight development length of tensile threaded bars in high-strength reinforced concrete members	661-674
Zhang, Hongzhi / Savija, Branko / Schlangen, Erik	Towards understanding stochastic fracture performance of cement paste at micro length scale based on numerical simulation	189-201
Tang, Yongjing / Shao, Zhendong / Xu, Tianlong	Uniaxial compressive tests on ancient brick masonry from heritage buildings under unsaturated freeze-thaw conditions	706-715
Wi, Kwangwoo / Lee, Han-Seung / Lim, Seungmin / Song, Hun / Hussin, Mohd Warid / Ismail, Mohamed A.	Use of an agricultural by-product, nano sized Palm Oil Fuel Ash as a supplementary cementitious material	139-149
Pourabbas Bilondi, Meysam / Toufigh, Mohammad Mohsen / Toufigh, Vahid	Using calcium carbide residue as an alkaline activator for glass powder–clay geopolymer	417-428
Moodi, Yaser / Mousavi, Seyed Roohollah / Ghavidel, Alireza / Sohrabi, Mohammad Reza / Rashki, Mohsen	Using Response Surface Methodology and providing a modified model using whale algorithm for estimating the compressive strength of columns confined with FRP sheets	163-170
Hu, Jiezhen / Deng, Peichang / Li, Xiaogang / Zhang, Jibiao / Wang, Gui	The vertical Non-uniform corrosion of Reinforced concrete exposed to the marine environments	180-188

Über diese
Datenseite
IssueID
21511
Veröffentlicht am:
25.11.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - September 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - September 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.