Construction and Building Materials - October 2018

Published:	October 2018

Articles in this Issue

Author(s)	Title	Page(s)
Huang, Guodong / Ji, Yongsheng / Zhang, Linglei / Li, Jun / Hou, Zhihui	Advances in understanding and analyzing the anti-diffusion behavior in complete carbonation zone of MSWI bottom ash-based alkali-activated concrete	1072-1081
Mohammadinia, Alireza / Arulrajah, Arul / D'Amico, Angelo / Horpibulsuk, Suksun	Alkali-activation of fly ash and cement kiln dust mixtures for stabilization of demolition aggregates	71-78
Zhou, Zilong / Du, Xueming / Wang, Shanyong / Zang, Haizhi	Analysis and engineering application investigation of multiple-hole grouting injections into porous media considering filtration effects	871-883
Zhou, Mi / Lu, Wei / Song, Jianwei / Lee, George C.	Application of Ultra-High Performance Concrete in bridge engineering	1256-1267
Mohseni, Ehsan	Assessment of Na2SiO3 to NaOH ratio impact on the performance of polypropylene fiber-reinforced geopolymer composites	904-911
Nguyen, Dang Mao / Grillet, Anne-Cécile / Bui, Quoc-Bao / Diep, Thi My Hanh / Woloszyn, Monika	Building bio-insulation materials based on bamboo powder and bio-binders	686-698
Ortega, Irene / Pellicer, Teresa M. / Calderón, Pedro A. / Adam, José M.	Cement-based mortar patch repair of RC columns. Comparison with all-four-sides and one-side repair	338-350
Karakurt, Cenk / Çelik, Ahmet Ozan / Yılmazer, Cem / Kiriççi, Volkan / Özyaşar, Ethem	CFD simulations of self-compacting concrete with discrete phase modeling	20-30
Zhang, Dajiang / Zhao, Jihui / Wang, Dongmin / Xu, Chenyang / Zhai, Mengyi / Ma, Xiangdong	Comparative study on the properties of three hydraulic lime mortar systems: Natural hydraulic lime mortar, cement-aerial lime-based mortar and slag-aerial lime-based mortar	42-52
Dorafshan, Sattar / Thomas, Robert J. / Maguire, Marc	Comparison of deep convolutional neural networks and edge detectors for image-based crack detection in concrete	1031-1045
Khabaz, Amjad	Construction and design requirements of green buildings' roofs in Saudi Arabia depending on thermal conductivity principle	1119-1131
Yuan, Huang / Weijian, Yi / Chao, Hu	Corroded reinforced concrete beams under low-speed and low-cycle fatigue loads	644-651
Patterson, Naomi / Yoon, Seyoon / Macphee, Donald E. / Imbabi, Mohammed S.	The cuboid method for measurement of thermal properties of cement-based materials using the guarded heat flow meter	801-810
Wang, Bin / Zhu, Songye	Cyclic tension–compression behavior of superelastic shape memory alloy bars with buckling-restrained devices	103-113
Zhang, Wei / Yao, Xiao / Yang, Tao / Zhang, Zuhua	The degradation mechanisms of alkali-activated fly ash/slag blend cements exposed to sulphuric acid	1177-1187
Khan, Hammad A. / Khan, Mohammad S. H. / Castel, Arnaud / Sunarho, Jerry	Deterioration of alkali-activated mortars exposed to natural aggressive sewer environment	577-597
Do, Tan Manh / Kang, Gyeongo / Vu, Ngan / Kim, Young-Sang	Development of a new cementless binder for marine dredged soil stabilization: Strength behavior, hydraulic resistance capacity, microstructural analysis, and environmental impact	263-275
Shbeeb, Nadim I. / Khasawneh, Mohammad Ali / Al-Omari, Aslam A.	The development of a predictive tool to reduce experimentation time for the polishing and frictional evaluation of asphalt pavement surfaces	740-750
Cao, Shuai / Yilmaz, Erol / Song, Weidong	Dynamic response of cement-tailings matrix composites under SHPB compression load	892-903
Pham, Thong M. / Zhang, X. / Elchalakani, M. / Karrech, A. / Hao, Hong / Ryan, Aarin	Dynamic response of rubberized concrete columns with and without FRP confinement subjected to lateral impact	207-218
Feng, Libang / Yu, Zhengyang / Bian, Yaohui / Wang, Yanping / Zhao, Yanhua / Gou, Liuxiaohui	Effect of failure modes on healing behavior and multiple healing capability of self-healing polyurethanes	1212-1219
Ismail, Mohamed K. / AbdelAleem, Basem H. / Hassan, Assem A. A.	Effect of fiber type on the behavior of cementitious composite beam-column joints under reversed cyclic loading	969-977
Roy, Rahul / Mitra, Ananda / Ganesh, Ajay T. / Sairam, V.	Effect of Graphene Oxide Nanosheets dispersion in cement mortar composites incorporating Metakaolin and Silica Fume	514-524
Yong-Sik, Yoon / Hwa-Sung, Ryu / Hee-Seob, Lim / Kyung-Taek, Koh / Jeong-Su, Kim / Seung-Jun, Kwon	Effect of grout conditions and tendon location on corrosion pattern in PS tendon in grout	1005-1015
Jiang, Chaohua / Jin, Chen / Wang, Yizhi / Yan, Sheng / Chen, Da	Effect of heat curing treatment on the drying shrinkage behavior and microstructure characteristics of mortar incorporating different content ground granulated blast-furnace slag	379-387
Hwang, Chao-Lung / Vo, Duy-Hai / Tran, Vu-An / Yehualaw, Mitiku Damtie	Effect of high MgO content on the performance of alkali-activated fine slag under water and air curing conditions	503-513
Borinaga-Treviño, R. / Orbe, A. / Norambuena-Contreras, J. / Canales, J.	Effect of microwave heating damage on the electrical, thermal and mechanical properties of fibre-reinforced cement mortars	31-41
Zajac, Maciej / Skocek, Jan / Müller, Arnaud / Ben Haha, Mohsen	Effect of sulfate content on the porosity distribution and resulting performance of composite cements	912-919
Liu, Xiguang / Niu, Ditao / Li, Xingchen / Lv, Yao	Effects of Ca(OH)2 – CaCO3 concentration distribution on the pH and pore structure in natural carbonated cover concrete: A case study	1276-1285
Lu, Bao / Shi, Caijun / Zhang, Jiake / Wang, Jiyun	Effects of carbonated hardened cement paste powder on hydration and microstructure of Portland cement	699-708
Wang, Linhao / Li, Xiangyu / Cheng, Yin / Zhang, Yanfei / Bai, Xiaohong	Effects of coal-bearing metakaolin on the compressive strength and permeability of cemented silty soil and mechanisms	174-181
Sun, Chao / Zhu, Yu / Guo, Jian / Zhang, Yamei / Sun, Guoxing	Effects of foaming agent type on the workability, drying shrinkage, frost resistance and pore distribution of foamed concrete	833-839
Carfagnini, Carmela / Baraccani, Simonetta / Silvestri, Stefano / Theodossopoulos, Dimitris	The effects of in-plane shear displacements at the springings of Gothic cross vaults	219-232
Zhang, Junjie / Li, Guoxin / Ye, Wenting / Chang, Yuzhen / Liu, Qingfeng / Song, Zhanping	Effects of ordinary Portland cement on the early properties and hydration of calcium sulfoaluminate cement	1144-1153
Zhang, Chunmei / Li, Yuntao / Cheng, Xiaowei / Liang, Shihan / Guo, Xiaoyang / Zhao, Huijie / Song, Yulong	Effects of plasma-treated rock asphalt on the mechanical properties and microstructure of oil-well cement	163-173
Alhaik, Ghaith / Dubois, Vincent / Wirquin, Eric / Leblanc, Alexandre / Aouad, Georges	Evaluate the influence of starch on earth/hemp or flax straws mixtures properties in presence of superplasticizer	762-772
Siddique, Salman / Shrivastava, Sandeep / Chaudhary, Sandeep	Evaluating resistance of fine bone china ceramic aggregate concrete to sulphate attack	826-832
Murru, A. / Freire-Lista, D. M. / Fort, R. / Varas-Muriel, M. J. / Meloni, P.	Evaluation of post-thermal shock effects in Carrara marble and Santa Caterina di Pittinuri limestone	1200-1211
Guo, Tianxiong / Xie, Yuchen / Weng, Xingzhong	Evaluation of the bond strength of a novel concrete for rapid patch repair of pavements	790-800
Paschalis, Spyridon A. / Lampropoulos, Andreas P. / Tsioulou, Ourania	Experimental and numerical study of the performance of ultra high performance fiber reinforced concrete for the flexural strengthening of full scale reinforced concrete members	351-366
Liang, Chen / Liu, Yuqing / Zhao, Changjun / Lei, Bo / Wu, Jieliang	Experimental and numerical study on an innovative girder-abutment joint in composite bridges with integral abutments	709-730
Perret, Olivier / Lebée, Arthur / Douthe, Cyril / Sab, Karam	Experimental determination of the equivalent-layer shear stiffness of CLT through four-point bending of sandwich beams	1132-1143
Li, Xiang / Zhou, Yuan / Zhang, Xinxing / Zheng, Weixin / Chang, Chenggong / Ren, Xiufeng / Zeng, Jinbo / Hai, Chunxi / Shen, Yue	Experimental investigation of thermal and mechanical properties of magnesium oxychloride cement with form-stable phase change material	670-677
He, Shiqin / Zhu, Zhongfeng / Lv, Miao / Wang, Hui	Experimental study on the creep behaviour of rock-filled concrete and self-compacting concrete	53-61
Chaboki, Hamid Reza / Ghalehnovi, Mansour / Karimipour, Arash / de Brito, Jorge	Experimental study on the flexural behaviour and ductility ratio of steel fibres coarse recycled aggregate concrete beams	400-422
Chu, S. H. / Li, L. G. / Kwan, A. K. H.	Fibre factors governing the fresh and hardened properties of steel FRC	1228-1238
Omran, Ahmed / Soliman, Nancy / Xie, Ailing / Davidenko, Tatyana / Tagnit-Hamou, Arezki	Field trials with concrete incorporating biomass-fly ash	660-669
Cascardi, Alessio / Micelli, Francesco / Aiello, Maria Antonietta	FRCM-confined masonry columns: experimental investigation on the effect of the inorganic matrix properties	811-825
Lee, Cheul-Kyu / Lee, Jae-Young / Lee, Il-Wha / Kim, Yong-Ki	GHG mitigation of railway concrete products using eco-concrete and surface protection agent	1154-1160
Daniele, V. / Taglieri, G. / Macera, L. / Rosatelli, G. / Otero, J. / Charola, A. E.	Green approach for an eco-compatible consolidation of the Agrigento biocalcarenites surface	1188-1199
Xu, Shuqiang / Ma, Qinglin / Wang, Julin / Wang, Lele	Grouting performance improvement for natural hydraulic lime-based grout via incorporating silica fume and silicon-acrylic latex	652-659
Chen, Ru / Gong, Jie / Jiang, Yongjia / Wang, Qingjun / Xi, Zhonghua / Xie, Hongfeng	Halogen-free flame retarded cold-mix epoxy asphalt binders: Rheological, thermal and mechanical characterization	863-870
Agar Ozbek, Ayda Safak / Weerheijm, Jaap / Van Breugel, Klaas	High speed photography technique for measuring impact strength of porous concrete	1092-1104
Qin, Xiantao / Zhu, Siyue / He, Xiang / Jiang, Yi	High temperature properties of high viscosity asphalt based on rheological methods	476-483
Huang, Guodong / Ji, Yongsheng / Zhang, Linglei / Li, Jun / Hou, Zhihui	The influence of curing methods on the strength of MSWI bottom ash-based alkali-activated mortars: The role of leaching of OH− and free alkali	978-985
Azadeh, A. / Ghavami, K.	The influence of heat on shrinkage and water absorption of Dendrocalamus giganteus bamboo as a functionally graded material	145-154
Sajid, Hizb Ullah / Kiran, Ravi	Influence of stress concentration and cooling methods on post-fire mechanical behavior of ASTM A36 steels	920-945
Souza, L. M. S. / Polder, R. B. / Çopuroğlu, O.	The influence of the anolyte solution type and concentration on lithium migration in mortar specimens	123-130
Wang, Xiao-hua / Zhang, She-rong / Wang, Chao / Liu, Fu-cun / Song, Ran / Wei, Pei-yong	Initial damage effect on dynamic compressive behaviors of roller compacted concrete (RCC) under impact loadings	388-399
Cacciotti, Riccardo / Valach, Jaroslav / Wolf, Benjamin	Innovative and easy-to-implement moisture monitoring system for brick units	598-614
Chai, Lijuan / Guo, Liping / Chen, Bo / Xu, Yanhui	Interactive effects of freeze-thaw cycle and carbonation on tensile property of ecological high ductility cementitious composites for bridge deck link slab	773-781
Chen, Changfu / Zhang, Genbao / Zornberg, Jorge G. / Morsy, Amr M. / Zhu, Shimin / Zhao, Hongbo	Interface behavior of tensioned bars embedded in cement-soil mixtures	840-853
Abdulmatin, Akkadath / Tangchirapat, Weerachart / Jaturapitakkul, Chai	An investigation of bottom ash as a pozzolanic material	155-162
Can, Ömer	Investigation of seismic performance of in-plane aligned masonry panels strengthened with Carbon Fiber Reinforced Polymer	854-862
Lu, Wei / Wang, Yu / Chen, Haodong / Jiang, Lin / Duan, Qiangling / Li, Mi / Wang, Qingsong / Sun, Jinhua	Investigation of the thermal response and breakage mechanism of point-supported glass facade under wind load	635-643
Sudarsanan, Nithin / Karpurapu, Rajagopal / Amrithalingam, Veeraragavan	An investigation on the interface bond strength of geosynthetic-reinforced asphalt concrete using Leutner shear test	423-437
Che, Tiankai / Pan, Baofeng / Ouyang, Jian	The laboratory evaluation of incorporating ceramsite into HMA as fine aggregates	1239-1246
Jing, Guoqing / Fu, Hao / Aela, Peyman	Lateral displacement of different types of steel sleepers on ballasted track	1268-1275
Yilmaz, Tolga / Kirac, Nevzat / Anil, Özgür / Erdem, R. Tuğrul / Sezer, Ceyda	Low-velocity impact behaviour of two way RC slab strengthening with CFRP strips	1046-1063
Noushini, Amin / Hastings, Max / Castel, Arnaud / Aslani, Farhad	Mechanical and flexural performance of synthetic fibre reinforced geopolymer concrete	454-475
Navarro, R. / Alcocel, E. G. / Sánchez, I. / Garcés, P. / Zornoza, E.	Mechanical properties of alkali activated ground SiMn slag mortars with different types of aggregates	79-89
Askarian, Mahya / Tao, Zhong / Adam, Georgius / Samali, Bijan	Mechanical properties of ambient cured one-part hybrid OPC-geopolymer concrete	330-337
Sengul, Ozkan	Mechanical properties of slurry infiltrated fiber concrete produced with waste steel fibers	1082-1091
Punurai, Wonsiri / Kroehong, Wunchock / Saptamongkol, Adam / Chindaprasirt, Prinya	Mechanical properties, microstructure and drying shrinkage of hybrid fly ash-basalt fiber geopolymer paste	62-70
Zhang, Jinpeng / Liu, Limin / Cao, Junzhi / Yan, Xu / Zhang, Futao	Mechanism and application of concrete-filled steel tubular support in deep and high stress roadway	233-246
Dvorkin, L. / Zhitkovsky, V. / Stepasyuk, Y. / Ribakov, Y.	A method for design of high strength concrete composition considering curing temperature and duration	731-739
Wu, Jianmin / Li, Dawei / Zhu, Baihe / Wu, Chunsheng	Milling process simulation of old asphalt mixture by discrete element	996-1004
Cui, Peide / Xiao, Yue / Yan, Boxiang / Li, Mingliang / Wu, Shaopeng	Morphological characteristics of aggregates and their influence on the performance of asphalt mixture	303-312
Robira, M. / Hilloulin, B. / Loukili, A. / Potin, G. / Bourbon, X. / Abdelouas, A.	Multi-scale investigation of the effect of γ irradiations on the mechanical properties of cementitious materials	484-494
Wang, Yanlei / Zhang, Xue / Cai, Gaochuang / Wan, Baolin / Waldmann, Danièle / Qu, Yuan	A new thickness-based accelerated aging test methodology for resin materials: Theory and preliminary experimental study	986-995
Yang, Yonggan / Zhang, Yunsheng / She, Wei / Wu, Zhitao / Liu, Zhiyong / Ding, Yajiu	Nondestructive monitoring the deterioration process of cement paste exposed to sodium sulfate solution by X-ray computed tomography	182-190
Kim, Gun / Park, Sangyun / Kim, Jin-Yeon / Kurtis, Kimberly E. / Hayes, Nolan W. / Jacobs, Laurence J.	Nonlinear Rayleigh surface waves to characterize microscale damage due to alkali-silica reaction (ASR) in full-scale, nuclear concrete specimens	1114-1118
Zhang, Weipeng / Yao, Xu / Khanal, Santosh / Xu, Shiai	A novel surface treatment for bamboo flour and its effect on the dimensional stability and mechanical properties of high density polyethylene/bamboo flour composites	1220-1227
Hunashikatti, Ganesh M. / Pradhan, Subhasis / Barai, Sudhirkumar V.	Partially hydrated recycled aggregate concrete: A systematic approach towards sustainable development	537-549
Saadoon, Tahseen / Gómez-Meijide, Breixo / García, Álvaro	Prediction of water evaporation and stability of cold asphalt mixtures containing different types of cement	751-761
Alghamri, R. / Kanellopoulos, A. / Litina, C. / Al-Tabbaa, A.	Preparation and polymeric encapsulation of powder mineral pellets for self-healing cement based materials	247-262
Motahari Karein, S. Mahmoud / Vosoughi, Payam / Isapour, Soroush / Karakouzian, Moses	Pretreatment of natural perlite powder by further milling to use as a supplementary cementitious material	782-789
Algin, Zeynep / Ozen, Mustafa	The properties of chopped basalt fibre reinforced self-compacting concrete	678-685
Sappakittipakorn, Manote / Sukontasukkul, Piti / Higashiyama, Hiroshi / Chindaprasirt, Prinya	Properties of hooked end steel fiber reinforced acrylic modified concrete	1247-1255
Ismail, N. / El-Maaddawy, T. / Khattak, N.	Quasi-static in-plane testing of FRCM strengthened non-ductile reinforced concrete frames with masonry infills	1286-1298
Lee, Dongkyu / Shin, Soomi / Doan, Quoc Hoan	Real-time robust assessment of angles and positions of nonscaled steel outrigger structure with Maxwell-Mohr method	1161-1176
Duan, Siyu / Liao, Hongqiang / Ma, Zhibin / Cheng, Fangqin / Fang, Li / Gao, Hongyu / Yang, Hengquan	The relevance of ultrafine fly ash properties and mechanical properties in its fly ash-cement gelation blocks via static pressure forming	1064-1071
Osio-Norgaard, Jorge / Gevaudan, Juan Pablo / Srubar, Wil V.	A review of chloride transport in alkali-activated cement paste, mortar, and concrete	191-206
Bagheri, Mohammadreza / Shariatipour, Seyed M. / Ganjian, Eshmaiel	A review of oil well cement alteration in CO2-rich environments	946-968
Ebrahimi, Khashayar / Daiezadeh, Mohammad Javad / Zakertabrizi, Mohammad / Zahmatkesh, Farhad / Habibnejad korayem, Asghar	A review of the impact of micro- and nanoparticles on freeze-thaw durability of hardened concrete: Mechanism perspective	1105-1113
Ng, Connie / Alengaram, U. Johnson / Wong, Leong Sing / Mo, Kim Hung / Jumaat, Mohd Zamin / Ramesh, S.	A review on microstructural study and compressive strength of geopolymer mortar, paste and concrete	550-576
Kakade, Vijay B. / Reddy, M. Amaranatha / Reddy, K. Sudhakar	Rutting performance of hydrated lime modified bituminous mixes	1-10
Niu, Lihua / Zheng, Shansuo / Zheng, Hao / Zhou, Yan / Pei, Pei	Seismic behavior of confined masonry walls subjected to freeze-thaw cycles	131-144
Mazumder, Mithil / Ahmed, Raju / Wajahat Ali, Ahmed / Lee, Soon-Jae	SEM and ESEM techniques used for analysis of asphalt binder and mixture: A state of the art review	313-329
Li, Dawang / Xiong, Cheng / Huang, Tong / Wei, Ren / Han, Ningxu / Xing, Feng	A simplified constitutive model for corroded steel bars	11-19
Perez, G. / Allegro, V. R. / Corroto, M. / Pons, A. / Guerrero, A.	Smart reversible thermochromic mortar for improvement of energy efficiency in buildings	884-891
Wang, Yanlei / Wang, Yongshuai / Han, Baoguo / Wan, Baolin / Cai, Gaochuang / Li, Zhizheng	Strain monitoring of concrete components using embedded carbon nanofibers/epoxy sensors	367-378
Djafar-Henni, Imane / Kassoul, Amar	Stress–strain model of confined concrete with Aramid FRP wraps	1016-1030
Ma, Chau-Khun / Awang, Abdullah Zawawi / Omar, Wahid	Structural and material performance of geopolymer concrete: A review	90-102
Sun, Zengqing / Lin, Xiaochen / Liu, Pengfei / Wang, Dawei / Vollpracht, Anya / Oeser, Markus	Study of alkali activated slag as alternative pavement binder	626-634
Lahouar, Mohamed Amine / Caron, Jean-François / Foret, Gilles / Benzarti, Karim / Mege, Romain	Temperature effect on the mechanical behavior of glued-in rods intended for the connection of timber elements	438-453
Savino, V. / Lanzoni, L. / Tarantino, A. M. / Viviani, M.	Tensile constitutive behavior of high and ultra-high performance fibre-reinforced-concretes	525-536
Pachón-Montaño, A. / Sánchez-Montero, J. / Andrade, C. / Fullea, J. / Moreno, E. / Matres, V.	Threshold concentration of chlorides in concrete for stainless steel reinforcement: Classic austenitic and new duplex stainless steel	495-502
Hu, Yong / Li, Yun An / Ruan, Cheng Ke / Lin, Jun Lin / Chen, Shu Jian / Tang, Hui Ming / Duan, Wen Hui	Transformation of pore structure in consolidated silty clay: New insights from quantitative pore profile analysis	615-625
He, Zhen / Hu, Lingling / Li, Yang / Hu, Jun / Shao, Yixin	Use of sandstone powder as a mineral additive for concrete	276-286
Jiapei, Du / Yuhuan, Bu / Xuechao, Cao / Zhonghou, Shen / Baojiang, Sun	Utilization of alkali-activated slag based composite in deepwater oil well cementing	114-122
Shanbara, Hayder Kamil / Ruddock, Felicite / Atherton, William	A viscoplastic model for permanent deformation prediction of reinforced cold mix asphalt	287-302

About this
data sheet
IssueID
21509
Published on:
25/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - October 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - October 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.