Construction and Building Materials - November 2018

Published:	November 2018

Articles in this Issue

Author(s)	Title	Page(s)
Bondar, Dali / Ma, Qianmin / Soutsos, Marios / Basheer, Muhammed / Provis, John L. / Nanukuttan, Sreejith	Alkali activated slag concretes designed for a desired slump, strength and chloride diffusivity	191-199
Peng, Chao / Chen, Pengxu / You, Zhanping / Lv, Songtao / Xu, Fang / Zhang, Weili / Yu, Jianying / Zhang, Hao	The anti-icing and mechanical properties of a superhydrophobic coating on asphalt pavement	83-94
Sharaky, Abbas M. / Mohamed, Naglaa S. / Elmashad, Mohie Eldin / Shredah, Nehad M.	Application of microbial biocementation to improve the physico-mechanical properties of sandy soil	861-869
Teimortashlu, E. / Dehestani, M. / Jalal, M.	Application of Taguchi method for compressive strength optimization of tertiary blended self-compacting mortar	1182-1191
Getahun, Mulusew Aderaw / Shitote, Stanley Muse / Abiero Gariy, Zachary C.	Artificial neural network based modelling approach for strength prediction of concrete incorporating agricultural and construction wastes	517-525
Ouattara, Drissa / Mbonimpa, Mamert / Yahia, Ammar / Belem, Tikou	Assessment of rheological parameters of high density cemented paste backfill mixtures incorporating superplasticizers	294-307
Liu, Jun / Ou, Guangfeng / Qiu, Qiwen / Xing, Feng / Tang, Kaifeng / Zeng, Jiaxin	Atmospheric chloride deposition in field concrete at coastal region	1015-1022
Haber, Zachary B. / Munoz, Jose F. / De La Varga, Igor / Graybeal, Benjamin A.	Bond characterization of UHPC overlays for concrete bridge decks: Laboratory and field testing	1056-1068
Wang, Yunyao / Shui, Zhonghe / Yu, Rui / Huang, Yun	Chloride ingress and binding of coral waste filler-coral waste sand marine mortar incorporating metakaolin	1069-1080
Wang, Tiao / Ishida, Testuya / Gu, Rui	A comparison of the specific surface area of fly ash measured by image analysis with conventional methods	1163-1172
Chen, Xin / Shi, Xiuzhi / Zhou, Jian / Chen, Qiusong / Li, Enming / Du, Xianghong	Compressive behavior and microstructural properties of tailings polypropylene fibre-reinforced cemented paste backfill	211-221
Amiri, Ali / Azima, Mahzad / Bundur, Zeynep Başaran	Crack remediation in mortar via biomineralization: Effects of chemical admixtures on biogenic calcium carbonate	317-325
Zhuang, Ning / Dong, Honghan / Zhou, Yujue / Chen, Da	Cracking behavior of reinforced concrete piles externally bonded with carbon fiber reinforced polymer in a marine environment	1154-1162
Li, Biao / Chi, Yin / Xu, Lihua / Li, Changning / Shi, Yuchun	Cyclic tensile behavior of SFRC: Experimental research and analytical model	1236-1250
Wu, Kai / Kang, Wang / Xu, Linglin / Sun, Dandan / Wang, Fazhou / De Schutter, Geert	Damage evolution of blended cement concrete under sodium sulfate attack in relation to ITZ volume content	452-465
Morandi, P. / Albanesi, L. / Graziotti, F. / Li Piani, T. / Penna, A. / Magenes, G.	Development of a dataset on the in-plane experimental response of URM piers with bricks and blocks	593-611
Amalia, Zahra / Qiao, Di / Nakamura, Hikaru / Miura, Taito / Yamamoto, Yoshihito	Development of simulation method of concrete cracking behavior and corrosion products movement due to rebar corrosion	560-572
Nguyen, Hoan D. / Choi, Eunsoo / Park, Kyoungsoo	Dilation behavior of normal strength concrete confined by FRP wire jackets	728-739
Mastali, M. / Kinnunen, P. / Dalvand, A. / Mohammadi Firouz, R. / Illikainen, M.	Drying shrinkage in alkali-activated binders – A critical review	533-550
Chen, Qian / Wang, Chaohui / Fu, Hao / Zhang, Lian	Durability evaluation of road cooling coating	13-23
Armengaud, Julie / Cyr, Martin / Casaux-Ginestet, Géraldine / Husson, Bernard	Durability of dry-mix shotcrete using supplementary cementitious materials	1-12
Nobakht, Mona / Sakhaeifar, Maryam S.	Dynamic modulus and phase angle prediction of laboratory aged asphalt mixtures	740-751
Liu, Yu / Han, Jianguo / Li, Mengyuan / Yan, Peiyu	Effect of a nanoscale viscosity modifier on rheological properties of cement pastes and mechanical properties of mortars	255-264
Gómez-Meijide, Breixo / Ajam, Harith / García, Álvaro / Vansteenkiste, Stefan	Effect of bitumen properties in the induction healing capacity of asphalt mixes	131-139
Jarrah, Majid / Najafabadi, Esmaeil Pournamazian / Khaneghahi, Mohammad Houshmand / Oskouei, Asghar Vatani	The effect of elevated temperatures on the tensile performance of GFRP and CFRP sheets	38-52
Zha, Yagang / Yu, Jianying / Wang, Ruiyang / He, Peng / Cao, Zhilong	Effect of ion chelating agent on self-healing performance of Cement-based materials	308-316
Yang, Shih-Hsien / Rachman, Firmansyah / Susanto, Hery Awan	Effect of moisture in aggregate on adhesive properties of warm-mix asphalt	1295-1307
Chen, Xuemei / Gao, Jianming / Liu, Chuanbei / Zhao, Yasong	Effect of neutralization on the setting and hardening characters of hemihydrate phosphogypsum plaster	53-64
Djerbi, Assia	Effect of recycled coarse aggregate on the new interfacial transition zone concrete	1023-1033
Ahmad, Muhammad Riaz / Chen, Bing	Effect of silica fume and basalt fiber on the mechanical properties and microstructure of magnesium phosphate cement (MPC) mortar	466-478
Liu, Zhichao / El-Tawil, Sherif / Hansen, Will / Wang, Fazhou	Effect of slag cement on the properties of ultra-high performance concrete	830-837
Liu, Xu / Zhang, Mo / Shao, Longtan / Chen, Zhiguo	Effect of volcanic ash filler on thermal viscoelastic property of SBS modified asphalt mastic	495-507
Sladek, J. / Novak, P. / Bishay, P. L. / Sladek, V.	Effective properties of cement-based porous piezoelectric ceramic composites	1208-1214
Cheng, Shukai / Shui, Zhonghe / Sun, Tao / Huang, Yun / Liu, Kaizhi	Effects of seawater and supplementary cementitious materials on the durability and microstructure of lightweight aggregate concrete	1081-1090
Caneda-Martínez, Laura / Frías, Moisés / Medina, César / de Rojas, Mª Isabel Sánchez / Rebolledo, Nuria / Sánchez, Javier	Evaluation of chloride transport in blended cement mortars containing coal mining waste	200-210
Yang, Lei / Lin, Xiaoshan / Gravina, Rebecca J.	Evaluation of dynamic increase factor models for steel fibre reinforced concrete	632-644
Ezerskiy, Valeriy / Kuznetsova, Natalia Vladimirovna / Seleznev, Artem Denisovich	Evaluation of the use of the CBPB production waste products for cement composites	1117-1123
Boulos, Lina / Foruzanmehr, M. Reza / Robert, Mathieu	Evolution of the interfacial transition zone and the degradation mechanism of zirconia treated flax fabric reinforced cementitious composites	120-130
Homoro, Omayma / Vu, Xuan Hong / Ferrier, Emmanuel	Experimental and analytical study of the thermo-mechanical behaviour of textile-reinforced concrete (TRC) at elevated temperatures: Role of discontinuous short glass fibres	645-663
Padalu, P. K. V. R. / Singh, Y. / Das, S.	Experimental investigation of out-of-plane behaviour of URM wallettes strengthened using welded wire mesh	1133-1153
Yuan, Wenting / Guo, Anxin / Yuan, Wei / Li, Hui	Experimental investigation on cyclic behavior of coastal bridge piers with non-uniform corrosion under biaxial quasi-static loads	222-234
Yang, Jia / Wang, Lianguang	Experimental research on flexural behaviors of damaged PRC beams strengthened with NSM CFRP strips	265-275
Hussein, Husam H. / Sargand, Shad M. / Al Rikabi, Fouad T. / Steinberg, Eric P.	Experimental validation of optimized ultra-high-performance concrete shear key shape for precast pre-stressed adjacent box girder bridges	178-190
Li, Yue / Zhang, Guosheng / Wang, Zigeng / Guan, Zhongzheng	Experimental-computational approach to investigate compressive strength of magnesium phosphate cement with nanoindentation and finite element analysis	414-426
Dias, C. M. R. / Campello, E. M. B. / Savastano, H. / John, V. M.	Exploratory pre-industrial test linking FGM and Hatschek technologies for the manufacture of asbestos-free corrugated cementitious roof sheets	975-984
Junco, C. / Rodríguez, A. / Calderón, V. / Muñoz-Rupérez, C. / Gutiérrez-González, S.	Fatigue durability test of mortars incorporating polyurethane foam wastes	373-381
Faghihi Kashani, Hamed / Ho, Carlton L. / Hyslip, James P.	Fouling and water content influence on the ballast deformation properties	881-895
Ding, Yao / Shi, Cai-Jun / Li, Ning	Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature	787-795
Aliha, M. R. M. / Razmi, A. / Mousavi, A.	Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen	612-622
García-Giménez, Rosario / Frías, Moisés / Arribas, Idoia / Vegas, Iñigo / de la Villa, Raquel Vigil / Rubio, Virginia	Freeze-thaw effect on the durability of binary cements containing activated coal-mining waste	140-149
Younis, Adel / Ebead, Usama / Suraneni, Prannoy / Nanni, Antonio	Fresh and hardened properties of seawater-mixed concrete	276-286
Aghdasi, Parham / Ostertag, Claudia P.	Green ultra-high performance fiber-reinforced concrete (G-UHP-FRC)	246-254
Zhao, Li / Guo, Xinli / Liu, Yuanyuan / Zhao, Yuhong / Chen, Zhongtao / Zhang, Yunsheng / Guo, Liping / Shu, Xin / Liu, Jiaping	Hydration kinetics, pore structure, 3D network calcium silicate hydrate, and mechanical behavior of graphene oxide reinforced cement composites	150-163
Younsi, Akli / Bordy, Arthur / Aggoun, Salima / Fiorio, Bruno	Hydration-drying interactions in OPC pastes blended with recycled OPC paste fine powder: Critical curing relative humidity hampering hydration	403-413
Manca, Mirko / Karrech, Ali / Dight, Phil / Ciancio, Daniela	Image Processing and Machine Learning to investigate fibre distribution on fibre-reinforced shotcrete Round Determinate Panels	870-880
Salami, Babatunde Abiodun / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammed / Adewumi, Adeshina Adewale	Impact of Al(OH)3 addition to POFA on the compressive strength of POFA alkali-activated mortar	65-82
Gong, Hongren / Sun, Yiren / Mei, Zijun / Huang, Baoshan	Improving accuracy of rutting prediction for mechanistic-empirical pavement design guide with deep neural networks	710-718
Gardete, Dinis / Picado-Santos, Luís / Capitão, Silvino	Improving bituminous mixture performance by optimizing the design compaction energy – A cost effective approach for better pavements	1173-1181
Wang, Jian / Su, Han / Du, Jinsheng	Influence of coupled effects between flexural tensile stress and carbonation time on the carbonation depth of concrete	439-451
Nasr, Danial / Pakshir, Amir Hossein / Ghayour, Hossein	The influence of curing conditions and alkaline activator concentration on elevated temperature behavior of alkali activated slag (AAS) mortars	108-119
Zuo, Jian-ping / Hong, Zi-jie / Xiong, Zu-qiang / Wang, Cheng / Song, Hong-qiang	Influence of different W/C on the performances and hydration progress of dual liquid high water backfilling material	910-917
Liu, Jingyi / Chen, Huaxin / Guan, Bowen / Liu, Kaiping / Wen, Jiuran / Sun, Zhihua	Influence of mineral nano-fibers on the physical properties of road cement concrete material	287-293
Svintsov, Alexander P. / Shambina, Svetlana L.	Influence of viscosity of vegetable and mineral oil on deformation properties of concrete and cement-sand mortar	964-974
Obaidat, Yasmeen Taleb / Haddad, Rami H. / Abdulwahab, Mahmoud A.	Innovative strengthening schemes of concrete cantilever beams using CFRP sheets: End anchorage effect	1215-1225
Zadshir, Mehdi / Oldham, Daniel J. / Hosseinnezhad, Shahrzad / Fini, Ellie H.	Investigating bio-rejuvenation mechanisms in asphalt binder via laboratory experiments and molecular dynamics simulation	392-402
Ren, Shisong / Liang, Ming / Fan, Weiyu / Zhang, Yuzhen / Qian, Chengduo / He, Ying / Shi, Jingtao	Investigating the effects of SBR on the properties of gilsonite modified asphalt	1103-1116
Mohammed, Monketh / Parry, Tony / Thom, Nick / Grenfell, James	Investigation into the bond strength of bitumen-fibre mastic	382-391
Bozkurt, Tarık Serhat / Demirkale, Sevtap Yılmaz	The laboratory analyses for the plasters prepared with river sand aggregate and hydraulic lime binder	691-709
Salas, Daniel A. / Ramirez, Angel D. / Ulloa, Nestor / Baykara, Haci / Boero, Andrea J.	Life cycle assessment of geopolymer concrete	170-177
Xuan, Dongxing / Tang, Pei / Poon, Chi Sun	Limitations and quality upgrading techniques for utilization of MSW incineration bottom ash in engineering applications – A review	1091-1102
Tripathi, Mayank / Dhakal, Rajesh P. / Dashti, Farhad / Massone, Leonardo M.	Low-cycle fatigue behaviour of reinforcing bars including the effect of inelastic buckling	1226-1235
Chen, Xiao / Zhou, Mingkai / Shen, Weiguo / Zhu, Guorui / Ge, Xuexiang	Mechanical properties and microstructure of metakaolin-based geopolymer compound-modified by polyacrylic emulsion and polypropylene fibers	680-690
Wu, Jian / Bai, Guo-liang / Wang, Peng / Liu, Ya	Mechanical properties of a new type of block made from shale and coal gangue	796-804
Trejbal, J.	Mechanical properties of lime-based mortars reinforced with plasma treated glass fibers	929-938
Zhang, Yao / Ju, J. Woody / Zhu, Hehua / Guo, Qinghua / Yan, Zhiguo	Micromechanics based multi-level model for predicting the coefficients of thermal expansion of hybrid fiber reinforced concrete	948-963
Kaur, Mandeep / Singh, Jaspal / Kaur, Manpreet	Microstructure and strength development of fly ash-based geopolymer mortar: Role of nano-metakaolin	672-679
Nguyen, Quang Hung / Lorente, Sylvie / Duhart-Barone, Anne	Modeling the ionic transport in mesoporous materials	1284-1294
Firdous, Rafia / Stephan, Dietmar / Yankwa Djobo, Jean Noël	Natural pozzolan based geopolymers: A review on mechanical, microstructural and durability characteristics	1251-1263
Huang, Yonghui / Shao, Haibing / Wieland, Erich / Kolditz, Olaf / Kosakowski, Georg	A new approach to coupled two-phase reactive transport simulation for long-term degradation of concrete	805-829
Su, Xianglong / Chen, Wen / Xu, Wenxiang / Liang, Yingjie	Non-local structural derivative Maxwell model for characterizing ultra-slow rheology in concrete	342-348
Mohammed, Bashar S. / Khed, Veerendrakumar C. / Liew, Mohd Shahir	Optimization of hybrid fibres in engineered cementitious composites	24-37
Brito, Flávia Maria Silva / Paes, Juarez Benigno / da Silva Oliveira, José Tarcísio / Arantes, Marina Donária Chaves / Vidaurre, Graziela Baptista / Brocco, Victor Fassina	Physico-mechanical characterization of heat-treated glued laminated bamboo	719-727
Heikal, Mohamed / Abdel-Gawwad, Hamdy A. / Ababneh, Fuad A.	Positive impact performance of hybrid effect of nano-clay and silica nano-particles on composite cements	508-516
Qin, Ling / Gao, Xiaojian / Zhang, Ailian	Potential application of Portland cement-calcium sulfoaluminate cement blends to avoid early age frost damage	363-372
Ashrafian, Ali / Taheri Amiri, Mohammad Javad / Rezaie-Balf, Mohammad / Ozbakkaloglu, Togay / Lotfi-Omran, Omid	Prediction of compressive strength and ultrasonic pulse velocity of fiber reinforced concrete incorporating nano silica using heuristic regression methods	479-494
Jin, Jiao / Xiao, Ting / Zheng, Jianlong / Liu, Ruohua / Qian, Guoping / Xie, Juan / Wei, Hui / Zhang, Junhui / Liu, Hongfu	Preparation and thermal properties of encapsulated ceramsite-supported phase change materials used in asphalt pavements	235-245
Xi, Cuiping / Zheng, Feng / Xu, Jiahe / Yang, Weiguang / Peng, Yuqing / Li, Yang / Li, Peng / Zhen, Qiang / Bashir, Sajid / Liu, Jingbo Louise	Preparation of glass-ceramic foams using extracted titanium tailing and glass waste as raw materials	896-909
Wu, Silin / Zhu, Wei / Lv, Yiyan / Shu, Shi / Han, Tingting / Wang, Feilong / Li, Yunquan / Liu, Jiming	Quality control indexes and curing agent values for submerged poured solidifying-silt island; case study of the artificial island of Dalian Bay, China	664-671
Wang, Junjie / Mu, Mulan / Liu, Yongliang	Recycled cement	1124-1132
Sedira, Naim / Castro-Gomes, João / Magrinho, Manuel	Red clay brick and tungsten mining waste-based alkali-activated binder: Microstructural and mechanical properties	1034-1048
Wei, Yu-Ling / Weng, Shao-Di / Xie, Xiang-Qi	Reduction of sintering energy by application of calcium fluoride as flux in lightweight aggregate sintering	765-772
Tariq, Faraz / Bhargava, Pradeep	Residual mechanical behavior of (SD 500) hot rolled TMT reinforcing steel bars after elevated temperatures	551-559
Khosravani, Mohammad Reza / Weinberg, Kerstin	A review on split Hopkinson bar experiments on the dynamic characterisation of concrete	1264-1283
Ye, Zhong Bao / Huang, Rui Yuan / Li, Yong Chi / Lv, Lin / Zhao, Kai / Zhang, Yong Liang / Ma, Jian / Lin, Jia Jian	Steel fiber-reinforced concrete under impact loading dynamic constitutive equation	1049-1055
Kandler, Georg / Lukačević, Markus / Zechmeister, Christopher / Wolff, Sebastian / Füssl, Josef	Stochastic engineering framework for timber structural elements and its application to glued laminated timber beams	573-592
El-Sisi, Alaa El-Din / Sallam, Hossam El-Din / Salim, Hani A. / El-Husseiny, Osama M.	Structural behavior of hybrid CFRP/steel bolted staggered joints	1192-1207
de Paiva, Cassio E. L. / Buck, Ana P. / Ferreira, Adelino	Sub-ballast performance in Brazilian railway infrastructures	164-169
Vázquez-Herrero, Cristina / Vilar, Juan / Mendoza, Carlos J. / Meli, Roberto / Aire, Carlos	Sustainable production of precast combined pile-cap and column elements via statistical analysis of self-compacting concrete kinetics	326-341
Zhang, Yongjuan / Yu, Ping / Pan, Fei / He, Yan	The synergistic effect of AFt enhancement and expansion in Portland cement-aluminate cement-FGD gypsum composite cementitious system	985-994
Shu, Benan / Zhang, Lei / Wu, Shaopeng / Dong, Lijie / Liu, Quantao / Wang, Qing	Synthesis and characterization of compartmented Ca-alginate/silica self-healing fibers containing bituminous rejuvenator	623-631
Bouregaya, S. / Kacimi, L. / Patapy, C. / Clastres, P.	Synthesis of alite cement with low environmental impact by using sludge from a dam reservoir and zinc sulphate as a mineralizer	752-764
Danie Roy, A. B. / Ganesh, R. / Waseem, Shakeel Ahmad / Shermi, C. / Venkatesan, J.	Temperature dependent bond strength model for GFRP laminate externally bonded to heat-damaged concrete	526-532
Jeon, Dongho / Yum, Woo Sung / Song, Haemin / Sim, Sungwon / Oh, Jae Eun	The temperature-dependent action of sugar in the retardation and strength improvement of Ca(OH)2-Na2CO3-activated fly ash systems through calcium complexation	918-928
Ontiveros-Ortega, Esther / Ruiz-Agudo, Encarnación M. / Ontiveros-Ortega, Alfonso	Thermal decomposition of the CaO in traditional lime kilns. Applications in cultural heritage conservation	349-362
Wang, Y. / Que, J. M. / Wang, C. / Li, C. H.	Three-dimensional observations of meso-structural changes in bimsoil using X-ray computed tomography (CT) under triaxial compression	773-786
Yarmohammadi, F. / Rafiee-Dehkharghani, R. / Behnia, C. / Aref, A. J.	Topology optimization of jet-grouted overlapping columns for mitigation of train-induced ground vibrations	838-850
Li, Xiuling / Xu, Huachuan / Meng, Weina / Bao, Yi	Tri-axial compressive properties of high-performance fiber-reinforced cementitious composites after exposure to high temperatures	939-947
Raposeiras, A. C. / Movilla-Quesada, D. / Bilbao-Novoa, R. / Cifuentes, C. / Ferrer-Norambuena, G. / Castro-Fresno, D.	The use of copper slags as an aggregate replacement in asphalt mixes with RAP: Physical–chemical and mechanical behavioural analysis	427-438
Somarathna, H. M. C. C. / Raman, S. N. / Mohotti, D. / Mutalib, A. A. / Badri, K. H.	The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review	995-1014
Mishra, Brajesh / Kumar Gupta, Mohit	Use of randomly oriented polyethylene terephthalate (PET) fiber in combination with fly ash in subgrade of flexible pavement	95-107
Teramoto, Atsushi / Watanabe, Masaki / Murakami, Ryota / Ohkubo, Takaaki	Visualization of internal crack growth due to alkali–silica reaction using digital image correlation	851-860

About this
data sheet
IssueID
21506
Published on:
12/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - November 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - November 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.