Construction and Building Materials - November 2018

Erschienen:	November 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Bondar, Dali / Ma, Qianmin / Soutsos, Marios / Basheer, Muhammed / Provis, John L. / Nanukuttan, Sreejith	Alkali activated slag concretes designed for a desired slump, strength and chloride diffusivity	191-199
Peng, Chao / Chen, Pengxu / You, Zhanping / Lv, Songtao / Xu, Fang / Zhang, Weili / Yu, Jianying / Zhang, Hao	The anti-icing and mechanical properties of a superhydrophobic coating on asphalt pavement	83-94
Sharaky, Abbas M. / Mohamed, Naglaa S. / Elmashad, Mohie Eldin / Shredah, Nehad M.	Application of microbial biocementation to improve the physico-mechanical properties of sandy soil	861-869
Teimortashlu, E. / Dehestani, M. / Jalal, M.	Application of Taguchi method for compressive strength optimization of tertiary blended self-compacting mortar	1182-1191
Getahun, Mulusew Aderaw / Shitote, Stanley Muse / Abiero Gariy, Zachary C.	Artificial neural network based modelling approach for strength prediction of concrete incorporating agricultural and construction wastes	517-525
Ouattara, Drissa / Mbonimpa, Mamert / Yahia, Ammar / Belem, Tikou	Assessment of rheological parameters of high density cemented paste backfill mixtures incorporating superplasticizers	294-307
Liu, Jun / Ou, Guangfeng / Qiu, Qiwen / Xing, Feng / Tang, Kaifeng / Zeng, Jiaxin	Atmospheric chloride deposition in field concrete at coastal region	1015-1022
Haber, Zachary B. / Munoz, Jose F. / De La Varga, Igor / Graybeal, Benjamin A.	Bond characterization of UHPC overlays for concrete bridge decks: Laboratory and field testing	1056-1068
Wang, Yunyao / Shui, Zhonghe / Yu, Rui / Huang, Yun	Chloride ingress and binding of coral waste filler-coral waste sand marine mortar incorporating metakaolin	1069-1080
Wang, Tiao / Ishida, Testuya / Gu, Rui	A comparison of the specific surface area of fly ash measured by image analysis with conventional methods	1163-1172
Chen, Xin / Shi, Xiuzhi / Zhou, Jian / Chen, Qiusong / Li, Enming / Du, Xianghong	Compressive behavior and microstructural properties of tailings polypropylene fibre-reinforced cemented paste backfill	211-221
Amiri, Ali / Azima, Mahzad / Bundur, Zeynep Başaran	Crack remediation in mortar via biomineralization: Effects of chemical admixtures on biogenic calcium carbonate	317-325
Zhuang, Ning / Dong, Honghan / Zhou, Yujue / Chen, Da	Cracking behavior of reinforced concrete piles externally bonded with carbon fiber reinforced polymer in a marine environment	1154-1162
Li, Biao / Chi, Yin / Xu, Lihua / Li, Changning / Shi, Yuchun	Cyclic tensile behavior of SFRC: Experimental research and analytical model	1236-1250
Wu, Kai / Kang, Wang / Xu, Linglin / Sun, Dandan / Wang, Fazhou / De Schutter, Geert	Damage evolution of blended cement concrete under sodium sulfate attack in relation to ITZ volume content	452-465
Morandi, P. / Albanesi, L. / Graziotti, F. / Li Piani, T. / Penna, A. / Magenes, G.	Development of a dataset on the in-plane experimental response of URM piers with bricks and blocks	593-611
Amalia, Zahra / Qiao, Di / Nakamura, Hikaru / Miura, Taito / Yamamoto, Yoshihito	Development of simulation method of concrete cracking behavior and corrosion products movement due to rebar corrosion	560-572
Nguyen, Hoan D. / Choi, Eunsoo / Park, Kyoungsoo	Dilation behavior of normal strength concrete confined by FRP wire jackets	728-739
Mastali, M. / Kinnunen, P. / Dalvand, A. / Mohammadi Firouz, R. / Illikainen, M.	Drying shrinkage in alkali-activated binders – A critical review	533-550
Chen, Qian / Wang, Chaohui / Fu, Hao / Zhang, Lian	Durability evaluation of road cooling coating	13-23
Armengaud, Julie / Cyr, Martin / Casaux-Ginestet, Géraldine / Husson, Bernard	Durability of dry-mix shotcrete using supplementary cementitious materials	1-12
Nobakht, Mona / Sakhaeifar, Maryam S.	Dynamic modulus and phase angle prediction of laboratory aged asphalt mixtures	740-751
Liu, Yu / Han, Jianguo / Li, Mengyuan / Yan, Peiyu	Effect of a nanoscale viscosity modifier on rheological properties of cement pastes and mechanical properties of mortars	255-264
Gómez-Meijide, Breixo / Ajam, Harith / García, Álvaro / Vansteenkiste, Stefan	Effect of bitumen properties in the induction healing capacity of asphalt mixes	131-139
Jarrah, Majid / Najafabadi, Esmaeil Pournamazian / Khaneghahi, Mohammad Houshmand / Oskouei, Asghar Vatani	The effect of elevated temperatures on the tensile performance of GFRP and CFRP sheets	38-52
Zha, Yagang / Yu, Jianying / Wang, Ruiyang / He, Peng / Cao, Zhilong	Effect of ion chelating agent on self-healing performance of Cement-based materials	308-316
Yang, Shih-Hsien / Rachman, Firmansyah / Susanto, Hery Awan	Effect of moisture in aggregate on adhesive properties of warm-mix asphalt	1295-1307
Chen, Xuemei / Gao, Jianming / Liu, Chuanbei / Zhao, Yasong	Effect of neutralization on the setting and hardening characters of hemihydrate phosphogypsum plaster	53-64
Djerbi, Assia	Effect of recycled coarse aggregate on the new interfacial transition zone concrete	1023-1033
Ahmad, Muhammad Riaz / Chen, Bing	Effect of silica fume and basalt fiber on the mechanical properties and microstructure of magnesium phosphate cement (MPC) mortar	466-478
Liu, Zhichao / El-Tawil, Sherif / Hansen, Will / Wang, Fazhou	Effect of slag cement on the properties of ultra-high performance concrete	830-837
Liu, Xu / Zhang, Mo / Shao, Longtan / Chen, Zhiguo	Effect of volcanic ash filler on thermal viscoelastic property of SBS modified asphalt mastic	495-507
Sladek, J. / Novak, P. / Bishay, P. L. / Sladek, V.	Effective properties of cement-based porous piezoelectric ceramic composites	1208-1214
Cheng, Shukai / Shui, Zhonghe / Sun, Tao / Huang, Yun / Liu, Kaizhi	Effects of seawater and supplementary cementitious materials on the durability and microstructure of lightweight aggregate concrete	1081-1090
Caneda-Martínez, Laura / Frías, Moisés / Medina, César / de Rojas, Mª Isabel Sánchez / Rebolledo, Nuria / Sánchez, Javier	Evaluation of chloride transport in blended cement mortars containing coal mining waste	200-210
Yang, Lei / Lin, Xiaoshan / Gravina, Rebecca J.	Evaluation of dynamic increase factor models for steel fibre reinforced concrete	632-644
Ezerskiy, Valeriy / Kuznetsova, Natalia Vladimirovna / Seleznev, Artem Denisovich	Evaluation of the use of the CBPB production waste products for cement composites	1117-1123
Boulos, Lina / Foruzanmehr, M. Reza / Robert, Mathieu	Evolution of the interfacial transition zone and the degradation mechanism of zirconia treated flax fabric reinforced cementitious composites	120-130
Homoro, Omayma / Vu, Xuan Hong / Ferrier, Emmanuel	Experimental and analytical study of the thermo-mechanical behaviour of textile-reinforced concrete (TRC) at elevated temperatures: Role of discontinuous short glass fibres	645-663
Padalu, P. K. V. R. / Singh, Y. / Das, S.	Experimental investigation of out-of-plane behaviour of URM wallettes strengthened using welded wire mesh	1133-1153
Yuan, Wenting / Guo, Anxin / Yuan, Wei / Li, Hui	Experimental investigation on cyclic behavior of coastal bridge piers with non-uniform corrosion under biaxial quasi-static loads	222-234
Yang, Jia / Wang, Lianguang	Experimental research on flexural behaviors of damaged PRC beams strengthened with NSM CFRP strips	265-275
Hussein, Husam H. / Sargand, Shad M. / Al Rikabi, Fouad T. / Steinberg, Eric P.	Experimental validation of optimized ultra-high-performance concrete shear key shape for precast pre-stressed adjacent box girder bridges	178-190
Li, Yue / Zhang, Guosheng / Wang, Zigeng / Guan, Zhongzheng	Experimental-computational approach to investigate compressive strength of magnesium phosphate cement with nanoindentation and finite element analysis	414-426
Dias, C. M. R. / Campello, E. M. B. / Savastano, H. / John, V. M.	Exploratory pre-industrial test linking FGM and Hatschek technologies for the manufacture of asbestos-free corrugated cementitious roof sheets	975-984
Junco, C. / Rodríguez, A. / Calderón, V. / Muñoz-Rupérez, C. / Gutiérrez-González, S.	Fatigue durability test of mortars incorporating polyurethane foam wastes	373-381
Faghihi Kashani, Hamed / Ho, Carlton L. / Hyslip, James P.	Fouling and water content influence on the ballast deformation properties	881-895
Ding, Yao / Shi, Cai-Jun / Li, Ning	Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature	787-795
Aliha, M. R. M. / Razmi, A. / Mousavi, A.	Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen	612-622
García-Giménez, Rosario / Frías, Moisés / Arribas, Idoia / Vegas, Iñigo / de la Villa, Raquel Vigil / Rubio, Virginia	Freeze-thaw effect on the durability of binary cements containing activated coal-mining waste	140-149
Younis, Adel / Ebead, Usama / Suraneni, Prannoy / Nanni, Antonio	Fresh and hardened properties of seawater-mixed concrete	276-286
Aghdasi, Parham / Ostertag, Claudia P.	Green ultra-high performance fiber-reinforced concrete (G-UHP-FRC)	246-254
Zhao, Li / Guo, Xinli / Liu, Yuanyuan / Zhao, Yuhong / Chen, Zhongtao / Zhang, Yunsheng / Guo, Liping / Shu, Xin / Liu, Jiaping	Hydration kinetics, pore structure, 3D network calcium silicate hydrate, and mechanical behavior of graphene oxide reinforced cement composites	150-163
Younsi, Akli / Bordy, Arthur / Aggoun, Salima / Fiorio, Bruno	Hydration-drying interactions in OPC pastes blended with recycled OPC paste fine powder: Critical curing relative humidity hampering hydration	403-413
Manca, Mirko / Karrech, Ali / Dight, Phil / Ciancio, Daniela	Image Processing and Machine Learning to investigate fibre distribution on fibre-reinforced shotcrete Round Determinate Panels	870-880
Salami, Babatunde Abiodun / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Maslehuddin, Mohammed / Adewumi, Adeshina Adewale	Impact of Al(OH)3 addition to POFA on the compressive strength of POFA alkali-activated mortar	65-82
Gong, Hongren / Sun, Yiren / Mei, Zijun / Huang, Baoshan	Improving accuracy of rutting prediction for mechanistic-empirical pavement design guide with deep neural networks	710-718
Gardete, Dinis / Picado-Santos, Luís / Capitão, Silvino	Improving bituminous mixture performance by optimizing the design compaction energy – A cost effective approach for better pavements	1173-1181
Wang, Jian / Su, Han / Du, Jinsheng	Influence of coupled effects between flexural tensile stress and carbonation time on the carbonation depth of concrete	439-451
Nasr, Danial / Pakshir, Amir Hossein / Ghayour, Hossein	The influence of curing conditions and alkaline activator concentration on elevated temperature behavior of alkali activated slag (AAS) mortars	108-119
Zuo, Jian-ping / Hong, Zi-jie / Xiong, Zu-qiang / Wang, Cheng / Song, Hong-qiang	Influence of different W/C on the performances and hydration progress of dual liquid high water backfilling material	910-917
Liu, Jingyi / Chen, Huaxin / Guan, Bowen / Liu, Kaiping / Wen, Jiuran / Sun, Zhihua	Influence of mineral nano-fibers on the physical properties of road cement concrete material	287-293
Svintsov, Alexander P. / Shambina, Svetlana L.	Influence of viscosity of vegetable and mineral oil on deformation properties of concrete and cement-sand mortar	964-974
Obaidat, Yasmeen Taleb / Haddad, Rami H. / Abdulwahab, Mahmoud A.	Innovative strengthening schemes of concrete cantilever beams using CFRP sheets: End anchorage effect	1215-1225
Zadshir, Mehdi / Oldham, Daniel J. / Hosseinnezhad, Shahrzad / Fini, Ellie H.	Investigating bio-rejuvenation mechanisms in asphalt binder via laboratory experiments and molecular dynamics simulation	392-402
Ren, Shisong / Liang, Ming / Fan, Weiyu / Zhang, Yuzhen / Qian, Chengduo / He, Ying / Shi, Jingtao	Investigating the effects of SBR on the properties of gilsonite modified asphalt	1103-1116
Mohammed, Monketh / Parry, Tony / Thom, Nick / Grenfell, James	Investigation into the bond strength of bitumen-fibre mastic	382-391
Bozkurt, Tarık Serhat / Demirkale, Sevtap Yılmaz	The laboratory analyses for the plasters prepared with river sand aggregate and hydraulic lime binder	691-709
Salas, Daniel A. / Ramirez, Angel D. / Ulloa, Nestor / Baykara, Haci / Boero, Andrea J.	Life cycle assessment of geopolymer concrete	170-177
Xuan, Dongxing / Tang, Pei / Poon, Chi Sun	Limitations and quality upgrading techniques for utilization of MSW incineration bottom ash in engineering applications – A review	1091-1102
Tripathi, Mayank / Dhakal, Rajesh P. / Dashti, Farhad / Massone, Leonardo M.	Low-cycle fatigue behaviour of reinforcing bars including the effect of inelastic buckling	1226-1235
Chen, Xiao / Zhou, Mingkai / Shen, Weiguo / Zhu, Guorui / Ge, Xuexiang	Mechanical properties and microstructure of metakaolin-based geopolymer compound-modified by polyacrylic emulsion and polypropylene fibers	680-690
Wu, Jian / Bai, Guo-liang / Wang, Peng / Liu, Ya	Mechanical properties of a new type of block made from shale and coal gangue	796-804
Trejbal, J.	Mechanical properties of lime-based mortars reinforced with plasma treated glass fibers	929-938
Zhang, Yao / Ju, J. Woody / Zhu, Hehua / Guo, Qinghua / Yan, Zhiguo	Micromechanics based multi-level model for predicting the coefficients of thermal expansion of hybrid fiber reinforced concrete	948-963
Kaur, Mandeep / Singh, Jaspal / Kaur, Manpreet	Microstructure and strength development of fly ash-based geopolymer mortar: Role of nano-metakaolin	672-679
Nguyen, Quang Hung / Lorente, Sylvie / Duhart-Barone, Anne	Modeling the ionic transport in mesoporous materials	1284-1294
Firdous, Rafia / Stephan, Dietmar / Yankwa Djobo, Jean Noël	Natural pozzolan based geopolymers: A review on mechanical, microstructural and durability characteristics	1251-1263
Huang, Yonghui / Shao, Haibing / Wieland, Erich / Kolditz, Olaf / Kosakowski, Georg	A new approach to coupled two-phase reactive transport simulation for long-term degradation of concrete	805-829
Su, Xianglong / Chen, Wen / Xu, Wenxiang / Liang, Yingjie	Non-local structural derivative Maxwell model for characterizing ultra-slow rheology in concrete	342-348
Mohammed, Bashar S. / Khed, Veerendrakumar C. / Liew, Mohd Shahir	Optimization of hybrid fibres in engineered cementitious composites	24-37
Brito, Flávia Maria Silva / Paes, Juarez Benigno / da Silva Oliveira, José Tarcísio / Arantes, Marina Donária Chaves / Vidaurre, Graziela Baptista / Brocco, Victor Fassina	Physico-mechanical characterization of heat-treated glued laminated bamboo	719-727
Heikal, Mohamed / Abdel-Gawwad, Hamdy A. / Ababneh, Fuad A.	Positive impact performance of hybrid effect of nano-clay and silica nano-particles on composite cements	508-516
Qin, Ling / Gao, Xiaojian / Zhang, Ailian	Potential application of Portland cement-calcium sulfoaluminate cement blends to avoid early age frost damage	363-372
Ashrafian, Ali / Taheri Amiri, Mohammad Javad / Rezaie-Balf, Mohammad / Ozbakkaloglu, Togay / Lotfi-Omran, Omid	Prediction of compressive strength and ultrasonic pulse velocity of fiber reinforced concrete incorporating nano silica using heuristic regression methods	479-494
Jin, Jiao / Xiao, Ting / Zheng, Jianlong / Liu, Ruohua / Qian, Guoping / Xie, Juan / Wei, Hui / Zhang, Junhui / Liu, Hongfu	Preparation and thermal properties of encapsulated ceramsite-supported phase change materials used in asphalt pavements	235-245
Xi, Cuiping / Zheng, Feng / Xu, Jiahe / Yang, Weiguang / Peng, Yuqing / Li, Yang / Li, Peng / Zhen, Qiang / Bashir, Sajid / Liu, Jingbo Louise	Preparation of glass-ceramic foams using extracted titanium tailing and glass waste as raw materials	896-909
Wu, Silin / Zhu, Wei / Lv, Yiyan / Shu, Shi / Han, Tingting / Wang, Feilong / Li, Yunquan / Liu, Jiming	Quality control indexes and curing agent values for submerged poured solidifying-silt island; case study of the artificial island of Dalian Bay, China	664-671
Wang, Junjie / Mu, Mulan / Liu, Yongliang	Recycled cement	1124-1132
Sedira, Naim / Castro-Gomes, João / Magrinho, Manuel	Red clay brick and tungsten mining waste-based alkali-activated binder: Microstructural and mechanical properties	1034-1048
Wei, Yu-Ling / Weng, Shao-Di / Xie, Xiang-Qi	Reduction of sintering energy by application of calcium fluoride as flux in lightweight aggregate sintering	765-772
Tariq, Faraz / Bhargava, Pradeep	Residual mechanical behavior of (SD 500) hot rolled TMT reinforcing steel bars after elevated temperatures	551-559
Khosravani, Mohammad Reza / Weinberg, Kerstin	A review on split Hopkinson bar experiments on the dynamic characterisation of concrete	1264-1283
Ye, Zhong Bao / Huang, Rui Yuan / Li, Yong Chi / Lv, Lin / Zhao, Kai / Zhang, Yong Liang / Ma, Jian / Lin, Jia Jian	Steel fiber-reinforced concrete under impact loading dynamic constitutive equation	1049-1055
Kandler, Georg / Lukačević, Markus / Zechmeister, Christopher / Wolff, Sebastian / Füssl, Josef	Stochastic engineering framework for timber structural elements and its application to glued laminated timber beams	573-592
El-Sisi, Alaa El-Din / Sallam, Hossam El-Din / Salim, Hani A. / El-Husseiny, Osama M.	Structural behavior of hybrid CFRP/steel bolted staggered joints	1192-1207
de Paiva, Cassio E. L. / Buck, Ana P. / Ferreira, Adelino	Sub-ballast performance in Brazilian railway infrastructures	164-169
Vázquez-Herrero, Cristina / Vilar, Juan / Mendoza, Carlos J. / Meli, Roberto / Aire, Carlos	Sustainable production of precast combined pile-cap and column elements via statistical analysis of self-compacting concrete kinetics	326-341
Zhang, Yongjuan / Yu, Ping / Pan, Fei / He, Yan	The synergistic effect of AFt enhancement and expansion in Portland cement-aluminate cement-FGD gypsum composite cementitious system	985-994
Shu, Benan / Zhang, Lei / Wu, Shaopeng / Dong, Lijie / Liu, Quantao / Wang, Qing	Synthesis and characterization of compartmented Ca-alginate/silica self-healing fibers containing bituminous rejuvenator	623-631
Bouregaya, S. / Kacimi, L. / Patapy, C. / Clastres, P.	Synthesis of alite cement with low environmental impact by using sludge from a dam reservoir and zinc sulphate as a mineralizer	752-764
Danie Roy, A. B. / Ganesh, R. / Waseem, Shakeel Ahmad / Shermi, C. / Venkatesan, J.	Temperature dependent bond strength model for GFRP laminate externally bonded to heat-damaged concrete	526-532
Jeon, Dongho / Yum, Woo Sung / Song, Haemin / Sim, Sungwon / Oh, Jae Eun	The temperature-dependent action of sugar in the retardation and strength improvement of Ca(OH)2-Na2CO3-activated fly ash systems through calcium complexation	918-928
Ontiveros-Ortega, Esther / Ruiz-Agudo, Encarnación M. / Ontiveros-Ortega, Alfonso	Thermal decomposition of the CaO in traditional lime kilns. Applications in cultural heritage conservation	349-362
Wang, Y. / Que, J. M. / Wang, C. / Li, C. H.	Three-dimensional observations of meso-structural changes in bimsoil using X-ray computed tomography (CT) under triaxial compression	773-786
Yarmohammadi, F. / Rafiee-Dehkharghani, R. / Behnia, C. / Aref, A. J.	Topology optimization of jet-grouted overlapping columns for mitigation of train-induced ground vibrations	838-850
Li, Xiuling / Xu, Huachuan / Meng, Weina / Bao, Yi	Tri-axial compressive properties of high-performance fiber-reinforced cementitious composites after exposure to high temperatures	939-947
Raposeiras, A. C. / Movilla-Quesada, D. / Bilbao-Novoa, R. / Cifuentes, C. / Ferrer-Norambuena, G. / Castro-Fresno, D.	The use of copper slags as an aggregate replacement in asphalt mixes with RAP: Physical–chemical and mechanical behavioural analysis	427-438
Somarathna, H. M. C. C. / Raman, S. N. / Mohotti, D. / Mutalib, A. A. / Badri, K. H.	The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review	995-1014
Mishra, Brajesh / Kumar Gupta, Mohit	Use of randomly oriented polyethylene terephthalate (PET) fiber in combination with fly ash in subgrade of flexible pavement	95-107
Teramoto, Atsushi / Watanabe, Masaki / Murakami, Ryota / Ohkubo, Takaaki	Visualization of internal crack growth due to alkali–silica reaction using digital image correlation	851-860

Über diese
Datenseite
IssueID
21506
Veröffentlicht am:
12.11.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - November 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - November 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.