Construction and Building Materials - December 2018

Published:	December 2018

Articles in this Issue

Author(s)	Title	Page(s)
Mehra, Priyansha / Kumar, Sanjeev / Thomas, Blessen Skariah / Gupta, Ramesh Chandra	Analysis on the hazardous jarosite added concrete	253-259
Hoseinpour, Hamed / Valluzzi, Maria Rosa / Garbin, Enrico / Panizza, Matteo	Analytical investigation of timber beams strengthened with composite materials	1242-1251
Pozza, Luca / Saetta, Anna / Savoia, Marco / Talledo, Diego	Angle bracket connections for CLT structures: Experimental characterization and numerical modelling	95-113
Kong, Lijuan / Fang, Jun / Zhou, Xiangming / Han, Mengdi / Lu, Haoran	Assessment of coatings for protection of cement paste against microbial induced deterioration through image analysis	342-353
Kang, Lan / Ge, Hanbin / Suzuki, Motoya / Wu, Bo	An average weight whole-process method for predicting mechanical and ductile fracture performances of HSS Q690 after a fire	1023-1041
Papa, Elettra / Medri, Valentina / Natali Murri, Annalisa / Laghi, Luca / De Aloysio, Giulia / Bandini, Simone / Landi, Elena	Characterization of alkali bonded expanded perlite	1139-1147
Hemalatha, M. S. / Santhanam, Manu	Characterizing supplementary cementing materials in blended mortars	440-459
Ben Maaouia, Oumeima / Hamzaoui, Rabah / Bennabi, Abdelkrim / Colin, Johan / Colina, Horacio	Chromium stabilization and trapping in the cement matrix of recycled concrete aggregates	667-678
Yousefi, Amir M. / Lim, James B. P. / Clifton, G. Charles	Cold-formed ferritic stainless steel unlipped channels with web perforations subject to web crippling under one-flange loadings	713-725
Walubita, Lubinda F. / Nyamuhokya, Tito P. / Komba, Julius J. / Ahmed Tanvir, Hossain / Souliman, Mena I. / Naik, Bhaven	Comparative assessment of the interlayer shear-bond strength of geogrid reinforcements in hot-mix asphalt	726-735
Hassan, Mostafa / Wille, Kay	Comparative experimental investigations on the compressive impact behavior of fiber-reinforced ultra high-performance concretes using split Hopkinson pressure bar	398-410
Dhahir, Mohammed K. / Nadir, Wissam	A compression field based model to assess the shear strength of concrete beams reinforced with longitudinal FRP bars	736-751
Lam, My Ngoc-Tra / Le, Duc-Hien / Jaritngam, Saravut	Compressive strength and durability properties of roller-compacted concrete pavement containing electric arc furnace slag aggregate and fly ash	912-922
Canivell, Jacinto / Martin-del-Rio, Juan Jesús / Alejandre, F. J. / García-Heras, Joaquín / Jimenez-Aguilar, Alberto	Considerations on the physical and mechanical properties of lime-stabilized rammed earth walls and their evaluation by ultrasonic pulse velocity testing	826-836
Anbarlouie, Mohadeseh / Mahdikhani, Mahdi / Maleki, Amir	The contribution of encapsulated polyurethane adhesive in improving the static torsional resistances of self-healing concrete beam comparing bonded FRP technique	904-911
Yazdi, Mohammad Ali / Liebscher, Marco / Hempel, Simone / Yang, Jian / Mechtcherine, Viktor	Correlation of microstructural and mechanical properties of geopolymers produced from fly ash and slag at room temperature	330-341
Sun, Qi / Li, Bing / Tian, Shuo / Cai, Chang / Xia, Yajie	Creep properties of geopolymer cemented coal gangue-fly ash backfill under dynamic disturbance	644-654
Naser, M. Z.	Deriving temperature-dependent material models for structural steel through artificial intelligence	56-68
Neyamadpour, Ahmad	Detection of subsurface cracking depth using electrical resistivity tomography: A case study in Masjed-Soleiman, Iran	1103-1108
Zhang, Zhidong / Scherer, George	Determination of water permeability for a moisture transport model with minimized batch effect	193-205
Wu, Hao-Liang / Zhang, Duo / Ellis, Brian R. / Li, Victor C.	Development of reactive MgO-based Engineered Cementitious Composite (ECC) through accelerated carbonation curing	23-31
Booya, Emad / Ghaednia, Hossein / Das, Sreekanta / Pande, Harshad	Durability of cementitious materials reinforced with various Kraft pulp fibers	1191-1200
Valdés-Vidal, G. / Botella-Nieto, R. / Pérez-Jiménez, F. / Calabi-Floody, A. / Sanchez-Alonso, E.	DUSST: Development of a new stress sweep fatigue test for asphalt mixtures	635-643
Cao, Yi-Fang / Tao, Zhong / Pan, Zhu / Wuhrer, Richard	Effect of calcium aluminate cement on geopolymer concrete cured at ambient temperature	242-252
Loderer, C. / Partl, M. N. / Poulikakos, L. D.	Effect of crumb rubber production technology on performance of modified bitumen	1159-1171
Velay-Lizancos, Mirian / Vazquez-Burgo, Pablo / Restrepo, David / Martínez-Lage, Isabel	Effect of fine and coarse recycled concrete aggregate on the mechanical behavior of precast reinforced beams: Comparison of FE simulations, theoretical, and experimental results on real scale beams	1109-1119
Barluenga, G. / Giménez, M. / Sepulcre, A. / Palomar, I.	Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions	1128-1138
Xiang, Jichun / Liu, Leping / Cui, Xuemin / He, Yan / Zheng, Guangjian / Shi, Caijun	Effect of limestone on rheological, shrinkage and mechanical properties of alkali – Activated slag/fly ash grouting materials	1285-1292
Mirgozar Langaroudi, Mir Alimohammad / Mohammadi, Yaghoub	Effect of nano-clay on workability, mechanical, and durability properties of self-consolidating concrete containing mineral admixtures	619-634
Hussein, Luaay / Amleh, Lamya / Siad, Hocine / Lachemi, Mohamed	Effect of very severe sulfate environment on bonded composite concrete system	752-763
Abdelrahman, Mohamed / Xi, Yunping	The effect of w/c ratio and aggregate volume fraction on chloride penetration in non-saturated concrete	260-269
Kundu, Sarada Prasad / Chakraborty, Sumit / Chakraborty, Subrata	Effectiveness of the surface modified jute fibre as fibre reinforcement in controlling the physical and mechanical properties of concrete paver blocks	554-563
Khedmati, Mahdieh / Alanazi, Hani / Kim, Yong-Rak / Nsengiyumva, Gabriel / Moussavi, Sussan	Effects of Na2O/SiO2 molar ratio on properties of aggregate-paste interphase in fly ash-based geopolymer mixtures through multiscale measurements	564-574
Padalu, P. K. V. R. / Singh, Y. / Das, S.	Efficacy of basalt fibre reinforced cement mortar composite for out-of-plane strengthening of unreinforced masonry	1172-1190
Kalfat, Robin / Gadd, Jeremy / Al-Mahaidi, Riadh / Smith, Scott T.	An efficiency framework for anchorage devices used to enhance the performance of FRP strengthened RC members	354-375
Li, Yue / Li, Yaqiang / Guan, Zhongzheng / Ding, Qingjun	Elastic modulus damage model of cement mortar under salt freezing circumstance based on X-ray CT scanning	1201-1209
Bharathi Priya, C. / Saravanan, T. Jothi / Balamonica, K. / Gopalakrishnan, N. / Rao, A. Rama Mohan	EMI based monitoring of early-age characteristics of concrete and comparison of serial/parallel multi-sensing technique	1268-1284
Al-Hadidy, A. I.	Engineering behavior of aged polypropylene-modified asphalt pavements	187-192
Snoeck, D. / De Schryver, T. / De Belie, N.	Enhanced impact energy absorption in self-healing strain-hardening cementitious materials with superabsorbent polymers	13-22
Ameri, Mahmoud / Mansourkhaki, Ali / Daryaee, Daryoosh	Evaluation of fatigue behavior of high reclaimed asphalt binder mixes modified with rejuvenator and softer bitumen	702-712
Chu, L. / Tang, B. / Fwa, T. F.	Evaluation of functional characteristics of laboratory mix design of porous pavement materials	281-289
Weishaar, Adrienne / Carpenter, Matthew / Loucks, Ryan / Sakulich, Aaron / Peterson, Amy M.	Evaluation of self-healing epoxy coatings for steel reinforcement	125-135
Lei, Yong / Wang, Hainian / Fini, Ellie H. / You, Zhanping / Yang, Xu / Gao, Junfeng / Dong, Shi / Jiang, Guan	Evaluation of the effect of bio-oil on the high-temperature performance of rubber modified asphalt	692-701
Ontiveros-Ortega, Esther / Rodríguez-García, Reyes / González-Serrano, Ana / Molina, Lidia	Evolution of mechanical properties in aerial lime mortars of traditional manufacturing, the relationship between putty and powder lime	575-589
Augeard, E. / Michel, L. / Ferrier, E.	Experimental and analytical study of the mechanical behavior of heterogeneous glulam–concrete beams and panels assembled by a specific treatment of wood	812-825
Ma, Yafei / Wang, Guodong / Su, Xiaochao / Wang, Lei / Zhang, Jianren	Experimental and modelling of the flexural performance degradation of corroded RC beams under fatigue load	994-1003
Li, Guodong / Yu, Jiangjiang / Cao, Peng / Ren, Zhengyi	Experimental and numerical investigation on I–II mixed-mode fracture of concrete based on the Monte Carlo random aggregate distribution	523-534
Riara, Martin / Tang, Ping / Mo, Liantong / Chen, Meng / Zhang, Jizhe / Wu, Shaopeng	Experimental assessment of the long-time crack healing in asphalt mixtures using healing agents	411-422
Namkon, Lee / Abhinav, Prabhakar / Gary, Ong Khim Chye / Juhyuk, Moon / Min-Hong, Zhang / Arthur, Cheng Chuen Hon / Klaus, Haugsted / Hau, Kong Kian	Experimental design of a well cement slurry for rapid gel strength development	1093-1102
He, Shaohua / Mosallam, Ayman S. / Fang, Zhi / Sun, Xiaolong / Su, Jie	Experimental evaluation of shear connectors using reactive powder concrete under natural curing condition	775-786
Ricci, Paolo / Di Domenico, Mariano / Verderame, Gerardo M.	Experimental investigation of the influence of slenderness ratio and of the in-plane/out-of-plane interaction on the out-of-plane strength of URM infill walls	507-522
Li, Biao / Chi, Yin / Xu, Lihua / Shi, Yuchuan / Li, Changning	Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete	80-94
Xu, Jie / Shu, Shenrui / Han, Qinghua / Liu, Ce	Experimental research on bond behavior of reinforced recycled aggregate concrete based on the acoustic emission technique	1230-1241
Liu, Xiongfei / Li, Yue	Experimental study of seismic behavior of partially corrosion-damaged reinforced concrete columns strengthened with FRP composites with large deformability	1071-1081
Gubana, Alessandra / Melotto, Massimo	Experimental tests on wood-based in-plane strengthening solutions for the seismic retrofit of traditional timber floors	290-299
Piña Ramírez, Carolina / Atanes Sánchez, Evangelina / Merino, Mercedes del Río / Viñas Arrebola, Carmen / Vidales Barriguete, Alejandra	Feasibility of the use of mineral wool fibres recovered from CDW for the reinforcement of conglomerates by study of their porosity	460-468
Zheng, Xuan / Zhang, Jun / Wang, Qing / Fan, Jiansheng	Flexural performance of high strength engineered cementitious composite-steel beam coupling with shrinkage load	932-941
Liu, Huiting / Yu, Yongjin / Liu, Huimin / Jin, Jianzhou / Liu, Shuoqiong	Hybrid effects of nano-silica and graphene oxide on mechanical properties and hydration products of oil well cement	311-319
Gupta, Lalit Kumar / Vyas, Ashok Kumar	Impact on mechanical properties of cement sand mortar containing waste granite powder	155-164
Dash, Swayam Siddha / Panda, Mahabir	Influence of mix parameters on design of cold bituminous mix	376-385
Zhao, Yunfeng / Ren, Song / Jiang, Deyi / Liu, Rong / Wu, Jianxun / Jiang, Xiang	Influence of wetting-drying cycles on the pore structure and mechanical properties of mudstone from Simian Mountain	923-931
Moodi, Faramarz / Kashi, Amin / Ramezanianpour, Ali Akbar / Pourebrahimi, Mohammadreza	Investigation on mechanical and durability properties of polymer and latex-modified concretes	145-154
Ma, Hui / Zhang, Zhigang / Ding, Bei / Tu, Xi	Investigation on the adhesive characteristics of Engineered Cementitious Composites (ECC) to steel bridge deck	679-691
Kumari, Monu / Ransinchung, G. D. R. N. / Singh, Surender	A laboratory investigation on Dense Bituminous Macadam containing different fractions of coarse and fine RAP	655-666
Yang, Chen / Shen, Shui-Long / Hou, Dong-Wei / Liao, Shao-Ming / Yuan, Da-Jun	Material properties of the seal gasket for shield tunnels: A review	877-890
Chen, E. / Leung, Christopher K. Y.	Mechanical aspects of simulating crack propagation in concrete under steel corrosion	165-175
Chu, Hong-yan / Ge, Xiaoli / Jiang, Jin-yang / Tang, Jinhui / Zhang, Zhifeng	Mechanical properties and ablation behaviour of nuclear sacrificial materials containing graphene sulfonate nanosheets	69-79
Bernat-Maso, Ernest / Gil, Lluís / Mercedes, Luis / Escrig, Christian	Mechanical properties of pre-stressed fabric-reinforced cementitious matrix composite (PFRCM)	228-241
Li, Y. L. / Zhao, X. L. / Singh Raman, R. K.	Mechanical properties of seawater and sea sand concrete-filled FRP tubes in artificial seawater	977-993
Hu, Wei / Nie, Qingke / Huang, Baoshan / Su, Aiwu / Du, Yong / Shu, Xiang / He, Qiang	Mechanical property and microstructure characteristics of geopolymer stabilized aggregate base	1120-1127
Balo, A. Madi / Rahier, H. / Mobili, A. / Katsiki, A. / Fagel, N. / Chinje, U. Melo / Njopwouo, D.	Metakaolin-based inorganic polymer synthesis using cotton shell ash as sole alkaline activator	1011-1022
Guo, Xiaolu / Song, Meng	Micro-nanostructures of tobermorite hydrothermal-synthesized from fly ash and municipal solid waste incineration fly ash	431-439
Nguyen, Thi Hai Yen / Tsuchiya, Koichi / Atarashi, Daiki	Microstructure and composition of fly ash and ground granulated blast furnace slag cement pastes in 42-month cured samples	114-124
El-Yamany, Hafez E. / El-Salamawy, Mona A. / El-Assal, Norhan T.	Microstructure and mechanical properties of alkali-activated slag mortar modified with latex	32-38
Dong, Shi / Zhong, Jian / Hao, Peiwen / Zhang, Wenjin / Chen, Jun / Lei, Yong / Schneider, Adam	Mining multiple association rules in LTPP database: An analysis of asphalt pavement thermal cracking distress	837-852
Jiang, Chao / Huang, Qing-Hua / Gu, Xiang-Lin / Zhang, Wei-Ping	Modeling the effects of fatigue damage on concrete carbonation	942-962
Wang, Junjie / Liu, Engui / Li, Liang	Multiscale investigations on hydration mechanisms in seawater OPC paste	891-903
Jin, Ruoyu / Yan, Libo / Soboyejo, Alfred B. O. / Huang, Liang / Kasal, Bohumil	Multivariate regression models in estimating the behavior of FRP tube encased recycled aggregate concrete	216-227
Liu, Xiaozhou / Li, Ben / Li, Zhijun / Shen, Weiguo	A new fracture model for reservoir ice layers in the northeast cold region of China	795-811
Tran, Van Quan / Soive, Anthony / Bonnet, Stéphanie / Khelidj, Abdelhafid	A numerical model including thermodynamic equilibrium, kinetic control and surface complexation in order to explain cation type effect on chloride binding capability of concrete	608-618
Chen, Jianhang / Saydam, Serkan / Hagan, Paul C.	Numerical simulation of the pull-out behaviour of fully grouted cable bolts	1148-1158
Xu, Bin / Li, Mingliang / Liu, Shaohua / Fang, Jing / Ding, Runduo / Cao, Dongwei	Performance analysis of different type preventive maintenance materials for porous asphalt based on high viscosity modified asphalt	320-329
Sun, Min / Zheng, Mulian / Qu, Guangzhen / Yuan, Kun / Bi, Yufeng / Wang, Jian	Performance of polyurethane modified asphalt and its mixtures	386-397
Paixão, André / Resende, Ricardo / Fortunato, Eduardo	Photogrammetry for digital reconstruction of railway ballast particles – A cost-efficient method	963-976
Borges, Andreia / Flores-Colen, Inês / de Brito, Jorge	Physical and mechanical performance of cement-based renders with different contents of fly ash, expanded cork granules and expanded clay	535-543
Nguyen, Quang Hung / Lorente, Sylvie / Duhart-Barone, Anne / Lamotte, Hervé	Porous arrangement and transport properties of geopolymers	853-865
Florez, Raul / Colorado, Henry A. / Giraldo, Carlos H. C. / Alajo, Ayodeji	Preparation and characterization of Portland cement pastes with Sm2O3 microparticle additions for neutron shielding applications	498-506
Geraldo, Rodrigo H. / Souza, Janaína D. / Campos, Sofia C. / Fernandes, Luiz F. R. / Camarini, Gladis	Pressured recycled gypsum plaster and wastes: Characteristics of eco-friendly building components	136-144
Qi, Jianan / Wu, Zemei / Ma, Zhongguo John / Wang, Jingquan	Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles	764-774
Ma, Lina / Zhao, Yanhua / Gong, Jinxin	Restrained early-age shrinkage cracking properties of high-performance concrete containing fly ash and ground granulated blast-furnace slag	1-12
Jiang, Wei / Huang, Yue / Sha, Aimin	A review of eco-friendly functional road materials	1082-1092
Luo, Xue / Gu, Fan / Ling, Meng / Lytton, Robert L.	Review of mechanistic-empirical modeling of top-down cracking in asphalt pavements	1053-1070
Ioannou, Socrates / Chowdhury, Morsaleen Shehzad / Badr, Atef	Rheological, hydration and mechanical characteristics of microsilica fibre reinforced cement combinations with incremental fly ash contents	423-430
Yan, Jia-Bao / Li, Zhong-Xian / Wang, Tao	Seismic behaviour of double skin composite shear walls with overlapped headed studs	590-607
Rahal, K. N. / Alrefaei, Y. T.	Shear strength of recycled aggregate concrete beams containing stirrups	866-876
Liu, Xiaoming / Li, Tingyu / Zhang, Henglong	Short-term aging resistance investigations of polymers and polyphosphoric acid modified asphalt binders under RTFOT aging process	787-794
Loss, Cristiano / Tannert, Thomas / Tesfamariam, Solomon	State-of-the-art review of displacement-based seismic design of timber buildings	481-497
Lan, Xiaoyi / Chan, Tak-Ming / Young, Ben	Structural behaviour and design of chord plastification in high strength steel CHS X-joints	1252-1267
Zhang, Junjie / Li, Guoxin / Yang, Xiaofeng / Ren, Shuangqian / Song, Zhanping	Study on a high strength ternary blend containing calcium sulfoaluminate cement/calcium aluminate cement/ordinary Portland cement	544-553
Gao, Yingli / Qu, Liangchen / He, Bei / Dai, Kaiming / Fang, Zaosheng / Zhu, Ruijuan	Study on effectiveness of anti-icing and deicing performance of super-hydrophobic asphalt concrete	270-280
Khalid, Usama / Liao, C. C. / Ye, Guan-lin / Yadav, Santosh Kumar	Sustainable improvement of soft marine clay using low cement content: A multi-scale experimental investigation	469-480
Qu, Z. Y. / Yu, Q. L.	Synthesizing super-hydrophobic ground granulated blast furnace slag to enhance the transport property of lightweight aggregate concrete	176-186
Nikravan, Morteza / Ramezanianpnour, Ali Akbar / Maknoon, Reza	Technological and environmental behavior of petrochemical incineration bottom ash (PI-BA) in cement-based using nano-SiO2 and silica fume (SF)	1042-1052
Hou, Shuguang / Chen, Chen / Zhang, Junhui / Shen, Huajie / Gu, Fan	Thermal and mechanical evaluations of asphalt emulsions and mixtures for microsurfacing	1221-1229
Zheng, Jian-Jun / Zhang, Jian / Zhou, Xin-Zhu / Wu, Yu-Fei / Ye, Yi-Mo / Wang, Yi-Hang	A three-step analytical scheme for estimating the steady-state chloride diffusion coefficient of mature cement paste	1004-1010
Tasker, Lee / Karrech, Ali / Shragge, Jeffrey / Josh, Matthew	Time-lapse monitoring of internal alteration of a concrete structure using ground penetrating radar	300-310
Puligilla, Sravanthi / Chen, Xu / Mondal, Paramita	Understanding the role of silicate concentration on the early-age reaction kinetics of a calcium containing geopolymeric binder	206-215
Assi, Lateef N. / Deaver, Edward (Eddie) / Ziehl, Paul	Using sucrose for improvement of initial and final setting times of silica fume-based activating solution of fly ash geopolymer concrete	47-55
Liu, Shengjie / Peng, Aihong / Wu, Jiantao / Zhou, Sheng Bo	Waste engine oil influences on chemical and rheological properties of different asphalt binders	1210-1220
De Rossi, A. / Carvalheiras, J. / Novais, R. M. / Ribeiro, M. J. / Labrincha, J. A. / Hotza, D. / Moreira, R. F. P. M.	Waste-based geopolymeric mortars with very high moisture buffering capacity	39-46

About this
data sheet
IssueID
21504
Published on:
28/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.