Construction and Building Materials - décembre 2018

Publié:	décembre 2018

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Mehra, Priyansha / Kumar, Sanjeev / Thomas, Blessen Skariah / Gupta, Ramesh Chandra	Analysis on the hazardous jarosite added concrete	253-259
Hoseinpour, Hamed / Valluzzi, Maria Rosa / Garbin, Enrico / Panizza, Matteo	Analytical investigation of timber beams strengthened with composite materials	1242-1251
Pozza, Luca / Saetta, Anna / Savoia, Marco / Talledo, Diego	Angle bracket connections for CLT structures: Experimental characterization and numerical modelling	95-113
Kong, Lijuan / Fang, Jun / Zhou, Xiangming / Han, Mengdi / Lu, Haoran	Assessment of coatings for protection of cement paste against microbial induced deterioration through image analysis	342-353
Kang, Lan / Ge, Hanbin / Suzuki, Motoya / Wu, Bo	An average weight whole-process method for predicting mechanical and ductile fracture performances of HSS Q690 after a fire	1023-1041
Papa, Elettra / Medri, Valentina / Natali Murri, Annalisa / Laghi, Luca / De Aloysio, Giulia / Bandini, Simone / Landi, Elena	Characterization of alkali bonded expanded perlite	1139-1147
Hemalatha, M. S. / Santhanam, Manu	Characterizing supplementary cementing materials in blended mortars	440-459
Ben Maaouia, Oumeima / Hamzaoui, Rabah / Bennabi, Abdelkrim / Colin, Johan / Colina, Horacio	Chromium stabilization and trapping in the cement matrix of recycled concrete aggregates	667-678
Yousefi, Amir M. / Lim, James B. P. / Clifton, G. Charles	Cold-formed ferritic stainless steel unlipped channels with web perforations subject to web crippling under one-flange loadings	713-725
Walubita, Lubinda F. / Nyamuhokya, Tito P. / Komba, Julius J. / Ahmed Tanvir, Hossain / Souliman, Mena I. / Naik, Bhaven	Comparative assessment of the interlayer shear-bond strength of geogrid reinforcements in hot-mix asphalt	726-735
Hassan, Mostafa / Wille, Kay	Comparative experimental investigations on the compressive impact behavior of fiber-reinforced ultra high-performance concretes using split Hopkinson pressure bar	398-410
Dhahir, Mohammed K. / Nadir, Wissam	A compression field based model to assess the shear strength of concrete beams reinforced with longitudinal FRP bars	736-751
Lam, My Ngoc-Tra / Le, Duc-Hien / Jaritngam, Saravut	Compressive strength and durability properties of roller-compacted concrete pavement containing electric arc furnace slag aggregate and fly ash	912-922
Canivell, Jacinto / Martin-del-Rio, Juan Jesús / Alejandre, F. J. / García-Heras, Joaquín / Jimenez-Aguilar, Alberto	Considerations on the physical and mechanical properties of lime-stabilized rammed earth walls and their evaluation by ultrasonic pulse velocity testing	826-836
Anbarlouie, Mohadeseh / Mahdikhani, Mahdi / Maleki, Amir	The contribution of encapsulated polyurethane adhesive in improving the static torsional resistances of self-healing concrete beam comparing bonded FRP technique	904-911
Yazdi, Mohammad Ali / Liebscher, Marco / Hempel, Simone / Yang, Jian / Mechtcherine, Viktor	Correlation of microstructural and mechanical properties of geopolymers produced from fly ash and slag at room temperature	330-341
Sun, Qi / Li, Bing / Tian, Shuo / Cai, Chang / Xia, Yajie	Creep properties of geopolymer cemented coal gangue-fly ash backfill under dynamic disturbance	644-654
Naser, M. Z.	Deriving temperature-dependent material models for structural steel through artificial intelligence	56-68
Neyamadpour, Ahmad	Detection of subsurface cracking depth using electrical resistivity tomography: A case study in Masjed-Soleiman, Iran	1103-1108
Zhang, Zhidong / Scherer, George	Determination of water permeability for a moisture transport model with minimized batch effect	193-205
Wu, Hao-Liang / Zhang, Duo / Ellis, Brian R. / Li, Victor C.	Development of reactive MgO-based Engineered Cementitious Composite (ECC) through accelerated carbonation curing	23-31
Booya, Emad / Ghaednia, Hossein / Das, Sreekanta / Pande, Harshad	Durability of cementitious materials reinforced with various Kraft pulp fibers	1191-1200
Valdés-Vidal, G. / Botella-Nieto, R. / Pérez-Jiménez, F. / Calabi-Floody, A. / Sanchez-Alonso, E.	DUSST: Development of a new stress sweep fatigue test for asphalt mixtures	635-643
Cao, Yi-Fang / Tao, Zhong / Pan, Zhu / Wuhrer, Richard	Effect of calcium aluminate cement on geopolymer concrete cured at ambient temperature	242-252
Loderer, C. / Partl, M. N. / Poulikakos, L. D.	Effect of crumb rubber production technology on performance of modified bitumen	1159-1171
Velay-Lizancos, Mirian / Vazquez-Burgo, Pablo / Restrepo, David / Martínez-Lage, Isabel	Effect of fine and coarse recycled concrete aggregate on the mechanical behavior of precast reinforced beams: Comparison of FE simulations, theoretical, and experimental results on real scale beams	1109-1119
Barluenga, G. / Giménez, M. / Sepulcre, A. / Palomar, I.	Effect of full scale pumping at early age and on hardened microstructure and properties of SCC with fly ash in hot-dry curing conditions	1128-1138
Xiang, Jichun / Liu, Leping / Cui, Xuemin / He, Yan / Zheng, Guangjian / Shi, Caijun	Effect of limestone on rheological, shrinkage and mechanical properties of alkali – Activated slag/fly ash grouting materials	1285-1292
Mirgozar Langaroudi, Mir Alimohammad / Mohammadi, Yaghoub	Effect of nano-clay on workability, mechanical, and durability properties of self-consolidating concrete containing mineral admixtures	619-634
Hussein, Luaay / Amleh, Lamya / Siad, Hocine / Lachemi, Mohamed	Effect of very severe sulfate environment on bonded composite concrete system	752-763
Abdelrahman, Mohamed / Xi, Yunping	The effect of w/c ratio and aggregate volume fraction on chloride penetration in non-saturated concrete	260-269
Kundu, Sarada Prasad / Chakraborty, Sumit / Chakraborty, Subrata	Effectiveness of the surface modified jute fibre as fibre reinforcement in controlling the physical and mechanical properties of concrete paver blocks	554-563
Khedmati, Mahdieh / Alanazi, Hani / Kim, Yong-Rak / Nsengiyumva, Gabriel / Moussavi, Sussan	Effects of Na2O/SiO2 molar ratio on properties of aggregate-paste interphase in fly ash-based geopolymer mixtures through multiscale measurements	564-574
Padalu, P. K. V. R. / Singh, Y. / Das, S.	Efficacy of basalt fibre reinforced cement mortar composite for out-of-plane strengthening of unreinforced masonry	1172-1190
Kalfat, Robin / Gadd, Jeremy / Al-Mahaidi, Riadh / Smith, Scott T.	An efficiency framework for anchorage devices used to enhance the performance of FRP strengthened RC members	354-375
Li, Yue / Li, Yaqiang / Guan, Zhongzheng / Ding, Qingjun	Elastic modulus damage model of cement mortar under salt freezing circumstance based on X-ray CT scanning	1201-1209
Bharathi Priya, C. / Saravanan, T. Jothi / Balamonica, K. / Gopalakrishnan, N. / Rao, A. Rama Mohan	EMI based monitoring of early-age characteristics of concrete and comparison of serial/parallel multi-sensing technique	1268-1284
Al-Hadidy, A. I.	Engineering behavior of aged polypropylene-modified asphalt pavements	187-192
Snoeck, D. / De Schryver, T. / De Belie, N.	Enhanced impact energy absorption in self-healing strain-hardening cementitious materials with superabsorbent polymers	13-22
Ameri, Mahmoud / Mansourkhaki, Ali / Daryaee, Daryoosh	Evaluation of fatigue behavior of high reclaimed asphalt binder mixes modified with rejuvenator and softer bitumen	702-712
Chu, L. / Tang, B. / Fwa, T. F.	Evaluation of functional characteristics of laboratory mix design of porous pavement materials	281-289
Weishaar, Adrienne / Carpenter, Matthew / Loucks, Ryan / Sakulich, Aaron / Peterson, Amy M.	Evaluation of self-healing epoxy coatings for steel reinforcement	125-135
Lei, Yong / Wang, Hainian / Fini, Ellie H. / You, Zhanping / Yang, Xu / Gao, Junfeng / Dong, Shi / Jiang, Guan	Evaluation of the effect of bio-oil on the high-temperature performance of rubber modified asphalt	692-701
Ontiveros-Ortega, Esther / Rodríguez-García, Reyes / González-Serrano, Ana / Molina, Lidia	Evolution of mechanical properties in aerial lime mortars of traditional manufacturing, the relationship between putty and powder lime	575-589
Augeard, E. / Michel, L. / Ferrier, E.	Experimental and analytical study of the mechanical behavior of heterogeneous glulam–concrete beams and panels assembled by a specific treatment of wood	812-825
Ma, Yafei / Wang, Guodong / Su, Xiaochao / Wang, Lei / Zhang, Jianren	Experimental and modelling of the flexural performance degradation of corroded RC beams under fatigue load	994-1003
Li, Guodong / Yu, Jiangjiang / Cao, Peng / Ren, Zhengyi	Experimental and numerical investigation on I–II mixed-mode fracture of concrete based on the Monte Carlo random aggregate distribution	523-534
Riara, Martin / Tang, Ping / Mo, Liantong / Chen, Meng / Zhang, Jizhe / Wu, Shaopeng	Experimental assessment of the long-time crack healing in asphalt mixtures using healing agents	411-422
Namkon, Lee / Abhinav, Prabhakar / Gary, Ong Khim Chye / Juhyuk, Moon / Min-Hong, Zhang / Arthur, Cheng Chuen Hon / Klaus, Haugsted / Hau, Kong Kian	Experimental design of a well cement slurry for rapid gel strength development	1093-1102
He, Shaohua / Mosallam, Ayman S. / Fang, Zhi / Sun, Xiaolong / Su, Jie	Experimental evaluation of shear connectors using reactive powder concrete under natural curing condition	775-786
Ricci, Paolo / Di Domenico, Mariano / Verderame, Gerardo M.	Experimental investigation of the influence of slenderness ratio and of the in-plane/out-of-plane interaction on the out-of-plane strength of URM infill walls	507-522
Li, Biao / Chi, Yin / Xu, Lihua / Shi, Yuchuan / Li, Changning	Experimental investigation on the flexural behavior of steel-polypropylene hybrid fiber reinforced concrete	80-94
Xu, Jie / Shu, Shenrui / Han, Qinghua / Liu, Ce	Experimental research on bond behavior of reinforced recycled aggregate concrete based on the acoustic emission technique	1230-1241
Liu, Xiongfei / Li, Yue	Experimental study of seismic behavior of partially corrosion-damaged reinforced concrete columns strengthened with FRP composites with large deformability	1071-1081
Gubana, Alessandra / Melotto, Massimo	Experimental tests on wood-based in-plane strengthening solutions for the seismic retrofit of traditional timber floors	290-299
Piña Ramírez, Carolina / Atanes Sánchez, Evangelina / Merino, Mercedes del Río / Viñas Arrebola, Carmen / Vidales Barriguete, Alejandra	Feasibility of the use of mineral wool fibres recovered from CDW for the reinforcement of conglomerates by study of their porosity	460-468
Zheng, Xuan / Zhang, Jun / Wang, Qing / Fan, Jiansheng	Flexural performance of high strength engineered cementitious composite-steel beam coupling with shrinkage load	932-941
Liu, Huiting / Yu, Yongjin / Liu, Huimin / Jin, Jianzhou / Liu, Shuoqiong	Hybrid effects of nano-silica and graphene oxide on mechanical properties and hydration products of oil well cement	311-319
Gupta, Lalit Kumar / Vyas, Ashok Kumar	Impact on mechanical properties of cement sand mortar containing waste granite powder	155-164
Dash, Swayam Siddha / Panda, Mahabir	Influence of mix parameters on design of cold bituminous mix	376-385
Zhao, Yunfeng / Ren, Song / Jiang, Deyi / Liu, Rong / Wu, Jianxun / Jiang, Xiang	Influence of wetting-drying cycles on the pore structure and mechanical properties of mudstone from Simian Mountain	923-931
Moodi, Faramarz / Kashi, Amin / Ramezanianpour, Ali Akbar / Pourebrahimi, Mohammadreza	Investigation on mechanical and durability properties of polymer and latex-modified concretes	145-154
Ma, Hui / Zhang, Zhigang / Ding, Bei / Tu, Xi	Investigation on the adhesive characteristics of Engineered Cementitious Composites (ECC) to steel bridge deck	679-691
Kumari, Monu / Ransinchung, G. D. R. N. / Singh, Surender	A laboratory investigation on Dense Bituminous Macadam containing different fractions of coarse and fine RAP	655-666
Yang, Chen / Shen, Shui-Long / Hou, Dong-Wei / Liao, Shao-Ming / Yuan, Da-Jun	Material properties of the seal gasket for shield tunnels: A review	877-890
Chen, E. / Leung, Christopher K. Y.	Mechanical aspects of simulating crack propagation in concrete under steel corrosion	165-175
Chu, Hong-yan / Ge, Xiaoli / Jiang, Jin-yang / Tang, Jinhui / Zhang, Zhifeng	Mechanical properties and ablation behaviour of nuclear sacrificial materials containing graphene sulfonate nanosheets	69-79
Bernat-Maso, Ernest / Gil, Lluís / Mercedes, Luis / Escrig, Christian	Mechanical properties of pre-stressed fabric-reinforced cementitious matrix composite (PFRCM)	228-241
Li, Y. L. / Zhao, X. L. / Singh Raman, R. K.	Mechanical properties of seawater and sea sand concrete-filled FRP tubes in artificial seawater	977-993
Hu, Wei / Nie, Qingke / Huang, Baoshan / Su, Aiwu / Du, Yong / Shu, Xiang / He, Qiang	Mechanical property and microstructure characteristics of geopolymer stabilized aggregate base	1120-1127
Balo, A. Madi / Rahier, H. / Mobili, A. / Katsiki, A. / Fagel, N. / Chinje, U. Melo / Njopwouo, D.	Metakaolin-based inorganic polymer synthesis using cotton shell ash as sole alkaline activator	1011-1022
Guo, Xiaolu / Song, Meng	Micro-nanostructures of tobermorite hydrothermal-synthesized from fly ash and municipal solid waste incineration fly ash	431-439
Nguyen, Thi Hai Yen / Tsuchiya, Koichi / Atarashi, Daiki	Microstructure and composition of fly ash and ground granulated blast furnace slag cement pastes in 42-month cured samples	114-124
El-Yamany, Hafez E. / El-Salamawy, Mona A. / El-Assal, Norhan T.	Microstructure and mechanical properties of alkali-activated slag mortar modified with latex	32-38
Dong, Shi / Zhong, Jian / Hao, Peiwen / Zhang, Wenjin / Chen, Jun / Lei, Yong / Schneider, Adam	Mining multiple association rules in LTPP database: An analysis of asphalt pavement thermal cracking distress	837-852
Jiang, Chao / Huang, Qing-Hua / Gu, Xiang-Lin / Zhang, Wei-Ping	Modeling the effects of fatigue damage on concrete carbonation	942-962
Wang, Junjie / Liu, Engui / Li, Liang	Multiscale investigations on hydration mechanisms in seawater OPC paste	891-903
Jin, Ruoyu / Yan, Libo / Soboyejo, Alfred B. O. / Huang, Liang / Kasal, Bohumil	Multivariate regression models in estimating the behavior of FRP tube encased recycled aggregate concrete	216-227
Liu, Xiaozhou / Li, Ben / Li, Zhijun / Shen, Weiguo	A new fracture model for reservoir ice layers in the northeast cold region of China	795-811
Tran, Van Quan / Soive, Anthony / Bonnet, Stéphanie / Khelidj, Abdelhafid	A numerical model including thermodynamic equilibrium, kinetic control and surface complexation in order to explain cation type effect on chloride binding capability of concrete	608-618
Chen, Jianhang / Saydam, Serkan / Hagan, Paul C.	Numerical simulation of the pull-out behaviour of fully grouted cable bolts	1148-1158
Xu, Bin / Li, Mingliang / Liu, Shaohua / Fang, Jing / Ding, Runduo / Cao, Dongwei	Performance analysis of different type preventive maintenance materials for porous asphalt based on high viscosity modified asphalt	320-329
Sun, Min / Zheng, Mulian / Qu, Guangzhen / Yuan, Kun / Bi, Yufeng / Wang, Jian	Performance of polyurethane modified asphalt and its mixtures	386-397
Paixão, André / Resende, Ricardo / Fortunato, Eduardo	Photogrammetry for digital reconstruction of railway ballast particles – A cost-efficient method	963-976
Borges, Andreia / Flores-Colen, Inês / de Brito, Jorge	Physical and mechanical performance of cement-based renders with different contents of fly ash, expanded cork granules and expanded clay	535-543
Nguyen, Quang Hung / Lorente, Sylvie / Duhart-Barone, Anne / Lamotte, Hervé	Porous arrangement and transport properties of geopolymers	853-865
Florez, Raul / Colorado, Henry A. / Giraldo, Carlos H. C. / Alajo, Ayodeji	Preparation and characterization of Portland cement pastes with Sm2O3 microparticle additions for neutron shielding applications	498-506
Geraldo, Rodrigo H. / Souza, Janaína D. / Campos, Sofia C. / Fernandes, Luiz F. R. / Camarini, Gladis	Pressured recycled gypsum plaster and wastes: Characteristics of eco-friendly building components	136-144
Qi, Jianan / Wu, Zemei / Ma, Zhongguo John / Wang, Jingquan	Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles	764-774
Ma, Lina / Zhao, Yanhua / Gong, Jinxin	Restrained early-age shrinkage cracking properties of high-performance concrete containing fly ash and ground granulated blast-furnace slag	1-12
Jiang, Wei / Huang, Yue / Sha, Aimin	A review of eco-friendly functional road materials	1082-1092
Luo, Xue / Gu, Fan / Ling, Meng / Lytton, Robert L.	Review of mechanistic-empirical modeling of top-down cracking in asphalt pavements	1053-1070
Ioannou, Socrates / Chowdhury, Morsaleen Shehzad / Badr, Atef	Rheological, hydration and mechanical characteristics of microsilica fibre reinforced cement combinations with incremental fly ash contents	423-430
Yan, Jia-Bao / Li, Zhong-Xian / Wang, Tao	Seismic behaviour of double skin composite shear walls with overlapped headed studs	590-607
Rahal, K. N. / Alrefaei, Y. T.	Shear strength of recycled aggregate concrete beams containing stirrups	866-876
Liu, Xiaoming / Li, Tingyu / Zhang, Henglong	Short-term aging resistance investigations of polymers and polyphosphoric acid modified asphalt binders under RTFOT aging process	787-794
Loss, Cristiano / Tannert, Thomas / Tesfamariam, Solomon	State-of-the-art review of displacement-based seismic design of timber buildings	481-497
Lan, Xiaoyi / Chan, Tak-Ming / Young, Ben	Structural behaviour and design of chord plastification in high strength steel CHS X-joints	1252-1267
Zhang, Junjie / Li, Guoxin / Yang, Xiaofeng / Ren, Shuangqian / Song, Zhanping	Study on a high strength ternary blend containing calcium sulfoaluminate cement/calcium aluminate cement/ordinary Portland cement	544-553
Gao, Yingli / Qu, Liangchen / He, Bei / Dai, Kaiming / Fang, Zaosheng / Zhu, Ruijuan	Study on effectiveness of anti-icing and deicing performance of super-hydrophobic asphalt concrete	270-280
Khalid, Usama / Liao, C. C. / Ye, Guan-lin / Yadav, Santosh Kumar	Sustainable improvement of soft marine clay using low cement content: A multi-scale experimental investigation	469-480
Qu, Z. Y. / Yu, Q. L.	Synthesizing super-hydrophobic ground granulated blast furnace slag to enhance the transport property of lightweight aggregate concrete	176-186
Nikravan, Morteza / Ramezanianpnour, Ali Akbar / Maknoon, Reza	Technological and environmental behavior of petrochemical incineration bottom ash (PI-BA) in cement-based using nano-SiO2 and silica fume (SF)	1042-1052
Hou, Shuguang / Chen, Chen / Zhang, Junhui / Shen, Huajie / Gu, Fan	Thermal and mechanical evaluations of asphalt emulsions and mixtures for microsurfacing	1221-1229
Zheng, Jian-Jun / Zhang, Jian / Zhou, Xin-Zhu / Wu, Yu-Fei / Ye, Yi-Mo / Wang, Yi-Hang	A three-step analytical scheme for estimating the steady-state chloride diffusion coefficient of mature cement paste	1004-1010
Tasker, Lee / Karrech, Ali / Shragge, Jeffrey / Josh, Matthew	Time-lapse monitoring of internal alteration of a concrete structure using ground penetrating radar	300-310
Puligilla, Sravanthi / Chen, Xu / Mondal, Paramita	Understanding the role of silicate concentration on the early-age reaction kinetics of a calcium containing geopolymeric binder	206-215
Assi, Lateef N. / Deaver, Edward (Eddie) / Ziehl, Paul	Using sucrose for improvement of initial and final setting times of silica fume-based activating solution of fly ash geopolymer concrete	47-55
Liu, Shengjie / Peng, Aihong / Wu, Jiantao / Zhou, Sheng Bo	Waste engine oil influences on chemical and rheological properties of different asphalt binders	1210-1220
De Rossi, A. / Carvalheiras, J. / Novais, R. M. / Ribeiro, M. J. / Labrincha, J. A. / Hotza, D. / Moreira, R. F. P. M.	Waste-based geopolymeric mortars with very high moisture buffering capacity	39-46

Informations
sur cette fiche
IssueID
21504
Publié(e) le:
28.11.2018
Modifié(e) le:
30.06.2019

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Construction and Building Materials - décembre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Construction and Building Materials - décembre 2018

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.