Construction and Building Materials - December 2018

Published:	December 2018

Articles in this Issue

Author(s)	Title	Page(s)
Qureshi, Tanvir / Kanellopoulos, Antonios / Al-Tabbaa, Abir	Autogenous self-healing of cement with expansive minerals-I: Impact in early age crack healing	768-784
Zeitouni, Adam I. / Rizos, Dimitris C. / Qian, Yu	Benefits of high strength reduced modulus (HSRM) concrete railroad ties under center binding support conditions	210-223
Dong, Zhiqiang / Wu, Gang / Zhao, Xiao-Ling / Zhu, Hong / Lian, Jinlong	Bond durability of steel-FRP composite bars embedded in seawater sea-sand concrete under constant bending and shearing stress	808-817
Valluzzi, Maria Rosa / Cescatti, Elvis / Cardani, Giuliana / Cantini, Lorenzo / Zanzi, Luigi / Colla, Camilla / Casarin, Filippo	Calibration of sonic pulse velocity tests for detection of variable conditions in masonry walls	272-286
Zhu, Chenhui / Fang, Yonghao / Wei, Hua	Carbonation-cementation of recycled hardened cement paste powder	224-232
Segura-Castillo, Luis / Monte, Renata / de Figueiredo, Antonio D.	Characterisation of the tensile constitutive behaviour of fibre-reinforced concrete: A new configuration for the Wedge Splitting Test	731-741
Olivier, Gerhard / Combrinck, Riaan / Kayondo, Muzafalu / Boshoff, William P.	Combined effect of nano-silica, super absorbent polymers, and synthetic fibres on plastic shrinkage cracking in concrete	85-98
Chen, Yue / Cen, Guoping / Cui, Yunhua	Comparative analysis on the anti-wheel impact performance of steel fiber and reticular polypropylene synthetic fiber reinforced airport pavement concrete under elevated temperature aging environment	818-835
Wang, Weiqiang / Sheikh, M. Neaz / Al-Baali, Ali Q. / Hadi, Muhammad N. S.	Compressive behaviour of partially FRP confined concrete: Experimental observations and assessment of the stress-strain models	785-797
Hanif, Muhammad Usman / Ibrahim, Zainah / Ghaedi, Khaled / Hashim, Huzaifa / Javanmardi, Ahad	Damage assessment of reinforced concrete structures using a model-based nonlinear approach – A comprehensive review	846-865
Pu, L. / Unluer, C.	Durability of carbonated MgO concrete containing fly ash and ground granulated blast-furnace slag	403-415
Helson, Olivier / Eslami, Javad / Beaucour, Anne-Lise / Noumowé, Albert / Gotteland, Philippe	Durability of soil mix material subjected to wetting/drying cycles and external sulfate attacks	416-428
Dong, Zhiqiang / Wu, Gang / Zhao, Xiao-Ling / Zhu, Hong / Lian, Jin-Long	Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars	671-682
Zhang, Xihong / Chiu, Yu-Wen / Hao, Hong / Hsieh, Ariel / Salter, Nigel / Cui, Jian	Dynamic compressive material properties of clay bricks at different strain rates	754-767
Khan, Mehran / Cao, Mingli / Ali, Majid	Effect of basalt fibers on mechanical properties of calcium carbonate whisker-steel fiber reinforced concrete	742-753
Jiang, Chaohua / Guo, Wenwen / Chen, Hui / Zhu, Yuliang / Jin, Chen	Effect of filler type and content on mechanical properties and microstructure of sand concrete made with superfine waste sand	442-449
Sun, Dandan / Wu, Kai / Shi, Huisheng / Zhang, Lintao / Zhang, Lihai	Effect of interfacial transition zone on the transport of sulfate ions in concrete	28-37
de Oliveira, Andrielli Morais / Cascudo, Oswaldo	Effect of mineral additions incorporated in concrete on thermodynamic and kinetic parameters of chloride-induced reinforcement corrosion	467-477
Girgin, Z. Canan	Effect of slag, nano clay and metakaolin on mechanical performance of basalt fibre cementitious composites	70-84
Xin, Jianda / Zhang, Guoxin / Liu, Yi / Wang, Zhenhong / Wu, Zhe	Effect of temperature history and restraint degree on cracking behavior of early-age concrete	381-390
Zou, Fubing / Tan, Hongbo / He, Xingyang / Ma, Baoguo / Deng, Xiufeng / Zhang, Ting / Mei, Junpeng / Liu, Xiaohai / Qi, Huahui	Effect of triisopropanolamine on compressive strength and hydration of steaming-cured cement-fly ash paste	836-845
Huang, Yijie / He, Xujia / Sun, Huangsheng / Sun, Yuedong / Wang, Qing	Effects of coral, recycled and natural coarse aggregates on the mechanical properties of concrete	330-347
Chang, Jun / Wang, Dan / Fang, Yanfeng	Effects of mineralogical changes in BOFS during carbonation on pH and Ca and Si leaching	584-592
Guo, Yongchang / Xie, Jianhe / Zheng, Wenyu / Li, Jianglin	Effects of steel slag as fine aggregate on static and impact behaviours of concrete	194-201
Mendes, Sandro E. S. / Oliveira, Rafael L. N. / Cremonez, Claiton / Pereira, Eduardo / Pereira, Elias / Medeiros-Junior, Ronaldo A.	Electrical resistivity as a durability parameter for concrete design: Experimental data versus estimation by mathematical model	610-620
Xu, Song / Dang, Lin / Yu, Jianying / Xue, Lihui / Hu, Changbin / Que, Yun	Evaluation of ultraviolet aging resistance of bitumen containing different organic layered double hydroxides	696-703
Orlik-Kożdoń, Bożena / Steidl, Tomasz	Experimental and analytical determination of water vapour transmission properties of recyclable insulation material	798-807
Huang, Yonghui / Liu, Guoxing / Huang, Shiping / Rao, Rui / Hu, Changfu	Experimental and finite element investigations on the temperature field of a massive bridge pier caused by the hydration heat of concrete	240-252
Zhuang, Bozhou / Liu, Yuqing / Yang, Fei	Experimental and numerical study on deformation performance of Rubber-Sleeved Stud connector under cyclic load	179-193
Cheng, Huailei / Sun, Lijun / Liu, Liping / Li, Hui	Fatigue characteristics of in-service cold recycling mixture with asphalt emulsion and HMA mixture	704-714
Wang, Xiao-hua / Zhang, She-rong / Wang, Chao / Song, Ran / Shang, Chao / Cao, Ke-lei	Fragmentation-based dynamic size effect of layered roller compacted concrete (RCC) under impact loadings	58-69
Chennouf, Nawal / Agoudjil, Boudjemma / Boudenne, Abderrahim / Benzarti, Karim / Bouras, Fathi	Hygrothermal characterization of a new bio-based construction material: Concrete reinforced with date palm fibers	348-356
Gao, Danying / Yang, Lin / Li, Ying	In situ monitoring the deterioration processes of hardened cement pastes and mortars exposed to continuous heating	515-525
Elalaoui, Oussama / Ghorbel, Elhem / Ouezdou, Mongi Ben	Influence of flame retardant addition on the durability of epoxy based polymer concrete after exposition to elevated temperature	233-239
Singh, Piyush Kumar / Suman, S. K.	Influence of graphite on the physical and rheological properties of bituminous binder before and after short-term ageing	866-873
Mohammed, Bashar S. / Achara, Bitrus Emmanuel / Liew, Mohd Shahir	The influence of high temperature on microstructural damage and residual properties of nano-silica-modified (NS-modified) self-consolidating engineering cementitious composites (SC-ECC) using response surface methodology (RSM)	450-466
Kim, Joo Hyung / Choi, Seul Woo / Lee, Kwang Myong / Choi, Young Cheol	Influence of internal curing on the pore size distribution of high strength concrete	50-57
Costa, H. / Carmo, R. N. F. / Júlio, E.	Influence of normal stress and reinforcement ratio on the behavior of LWAC interfaces	317-329
Zhao, Peng / Xu, Gang / Wang, Qing / Zhao, Juan / Liu, Xinqi	Influence of stirrup arrangements on the corrosion characteristics of reinforced concrete members	683-695
Roy, Sushanta / Miura, Taito / Nakamura, Hikaru / Yamamoto, Yoshihito	Investigation on applicability of spherical shaped EAF slag fine aggregate in pavement concrete – Fundamental and durability properties	555-568
Li, Qiang / Li, Guofen / Ma, Xiang / Zhang, Shuai	Linear viscoelastic properties of warm-mix recycled asphalt binder, mastic, and fine aggregate matrix under different aging levels	99-109
Zhang, Hongru / Ji, Tao / Zeng, Xuepeng / Yang, Zhengxian / Lin, Xujian / Liang, Yongning	Mechanical behavior of ultra-high performance concrete (UHPC) using recycled fine aggregate cured under different conditions and the mechanism based on integrated microstructural parameters	489-507
Martens, K. / Caspeele, R. / Belis, J.	Membrane action in reinforced glass beam systems: Experimental setup and results	301-316
Liu, Tiejun / Qin, Shanshan / Zou, Dujian / Song, Wen / Teng, Jun	Mesoscopic modeling method of concrete based on statistical analysis of CT images	429-441
Gwon, Seongwoo / Jang, Seung Yup / Shin, Myoungsu	Microstructure evolution and strength development of ultra rapid hardening cement modified with redispersible polymer powder	715-730
Zhang, Hongru / Ji, Tao / Liu, Hui / Su, Shangliang	Modifying recycled aggregate concrete by aggregate surface treatment using sulphoaluminate cement and basalt powder	526-537
Kim, Jaehwan / McCarter, W. John / Suryanto, Benny	Performance assessment of reinforced concrete after long-term exposure to a marine environment	569-583
Mohd Hasan, Mohd Rosli / You, Zhanping / You, Lingyun / Zhang, Ran	Performance of ethanol and ethanol-NaHCO3 based foamed WMA mixtures for low emission asphalt technology	9-19
Yin, Ke / Yang, Yao / Cheng, Y. Frank	Permeability of coal tar enamel coating to cathodic protection current on pipelines	20-27
Khatami, Hamidreza / O'Kelly, Brendan C.	Prevention of bleeding of particulate grouts using biopolymers	202-209
Cao, Ruilin / Li, Baoliang / You, Nanqiao / Zhang, Yamei / Zhang, Zuhua	Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag	123-132
Eziefula, Uchechi G. / Ezeh, John C. / Eziefula, Bennett I.	Properties of seashell aggregate concrete: A review	287-300
Xu, Li-Yan / Nie, Xin / Tao, Mu-Xuan	Rational modeling for cracking behavior of RC slabs in composite beams subjected to a hogging moment	357-365
Ghafoori, Nader / Diawara, Hamidou / Hasnat, Ariful	Remediation of loss in flow properties of self-consolidating concrete under various combinations of transportation time and temperature	508-514
Priyadharshini, P. / Ramamurthy, K. / Robinson, R. G.	Reuse potential of stabilized excavation soil as fine aggregate in cement mortar	141-152
Wang, Dehui / Shi, Caijun / Farzadnia, Nima / Shi, Zhenguo / Jia, Huangfei	A review on effects of limestone powder on the properties of concrete	153-166
Liu, Zanqun / Hu, Wenlong / Pei, Ming / Deng, Dehua	The role of carbonation in the occurrence of MgSO4 crystallization distress on concrete	167-178
Gou, Shuangke / Ding, Ran / Fan, Jiansheng / Nie, Xin / Zhang, Jun	Seismic performance of a novel precast concrete beam-column connection using low-shrinkage engineered cementitious composites	643-656
Souza, Jéssica / Silva, Ana / de Brito, Jorge / Bauer, Elton	Service life prediction of ceramic tiling systems in Brasília-Brazil using the factor method	38-49
Ahmad, Subhan / Bhargava, Pradeep / Chourasia, Ajay	Shear transfer strength of uncracked interfaces: A simple analytical model	366-380
Breccolotti, Marco / Bonfigli, Massimo Federico / Materazzi, Annibale Luigi	SonReb concrete assessment for spatially correlated NDT data	391-402
Beltrán, Juan Felipe / Nuñez, Eduardo / Nuñez, Fernanda / Silva, Ismael / Bravo, Tomás / Moffat, Ricardo	Static response of asymmetrically damaged metallic strands: Experimental and numerical approach	538-554
Briz, E. / Biezma, M. V. / Bastidas, D. M.	Stress corrosion cracking of new 2001 lean–duplex stainless steel reinforcements in chloride contained concrete pore solution: An electrochemical study	1-8
Finozzi, I. / Saetta, A. / Budelmann, H.	Structural response of reinforcing bars affected by pitting corrosion: experimental evaluation	478-488
González, Dorys C. / Mínguez, Jesús / Vicente, Miguel A. / Cambronero, Francisco / Aragón, Guillermo	Study of the effect of the fibers' orientation on the post-cracking behavior of steel fiber reinforced concrete from wedge-splitting tests and computed tomography scanning	110-122
Ghosh, Abhishek / Ghosh, Manojit	Tensile and impact behaviour of thermo mechanically treated and micro-alloyed medium carbon steel bar	657-670
Acurio, Karen / Chico-Proano, Andrés / Martínez-Gómez, Javier / Ávila, Carlos F. / Ávila, Álavaro / Orozco, Marco	Thermal performance enhancement of organic phase change materials using spent diatomite from the palm oil bleaching process as support	633-642
Pan, Zichao / Chen, Airong / Ma, Rujin / Wang, Dalei / Tian, Hao	Three-dimensional lattice modeling of concrete carbonation at meso-scale based on reconstructed coarse aggregates	253-271
Tauste, R. / Moreno-Navarro, F. / Sol-Sánchez, M. / Rubio-Gámez, M. C.	Understanding the bitumen ageing phenomenon: A review	593-609
Rincon Romero, Acacio / Salvo, Milena / Bernardo, Enrico	Up-cycling of vitrified bottom ash from MSWI into glass-ceramic foams by means of 'inorganic gel casting' and sinter-crystallization	133-140
Yuan, Bin / Wang, Yongqing / Yang, Yuanguang / Xie, Yingquan / Li, Yang	Wellbore sealing integrity of nanosilica-latex modified cement in natural gas reservoirs with high H2S contents	621-632

About this
data sheet
IssueID
21503
Published on:
28/11/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - December 2018

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - December 2018

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.