Construction and Building Materials - Dezember 2018

Erschienen:	Dezember 2018

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Qureshi, Tanvir / Kanellopoulos, Antonios / Al-Tabbaa, Abir	Autogenous self-healing of cement with expansive minerals-I: Impact in early age crack healing	768-784
Zeitouni, Adam I. / Rizos, Dimitris C. / Qian, Yu	Benefits of high strength reduced modulus (HSRM) concrete railroad ties under center binding support conditions	210-223
Dong, Zhiqiang / Wu, Gang / Zhao, Xiao-Ling / Zhu, Hong / Lian, Jinlong	Bond durability of steel-FRP composite bars embedded in seawater sea-sand concrete under constant bending and shearing stress	808-817
Valluzzi, Maria Rosa / Cescatti, Elvis / Cardani, Giuliana / Cantini, Lorenzo / Zanzi, Luigi / Colla, Camilla / Casarin, Filippo	Calibration of sonic pulse velocity tests for detection of variable conditions in masonry walls	272-286
Zhu, Chenhui / Fang, Yonghao / Wei, Hua	Carbonation-cementation of recycled hardened cement paste powder	224-232
Segura-Castillo, Luis / Monte, Renata / de Figueiredo, Antonio D.	Characterisation of the tensile constitutive behaviour of fibre-reinforced concrete: A new configuration for the Wedge Splitting Test	731-741
Olivier, Gerhard / Combrinck, Riaan / Kayondo, Muzafalu / Boshoff, William P.	Combined effect of nano-silica, super absorbent polymers, and synthetic fibres on plastic shrinkage cracking in concrete	85-98
Chen, Yue / Cen, Guoping / Cui, Yunhua	Comparative analysis on the anti-wheel impact performance of steel fiber and reticular polypropylene synthetic fiber reinforced airport pavement concrete under elevated temperature aging environment	818-835
Wang, Weiqiang / Sheikh, M. Neaz / Al-Baali, Ali Q. / Hadi, Muhammad N. S.	Compressive behaviour of partially FRP confined concrete: Experimental observations and assessment of the stress-strain models	785-797
Hanif, Muhammad Usman / Ibrahim, Zainah / Ghaedi, Khaled / Hashim, Huzaifa / Javanmardi, Ahad	Damage assessment of reinforced concrete structures using a model-based nonlinear approach – A comprehensive review	846-865
Pu, L. / Unluer, C.	Durability of carbonated MgO concrete containing fly ash and ground granulated blast-furnace slag	403-415
Helson, Olivier / Eslami, Javad / Beaucour, Anne-Lise / Noumowé, Albert / Gotteland, Philippe	Durability of soil mix material subjected to wetting/drying cycles and external sulfate attacks	416-428
Dong, Zhiqiang / Wu, Gang / Zhao, Xiao-Ling / Zhu, Hong / Lian, Jin-Long	Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars	671-682
Zhang, Xihong / Chiu, Yu-Wen / Hao, Hong / Hsieh, Ariel / Salter, Nigel / Cui, Jian	Dynamic compressive material properties of clay bricks at different strain rates	754-767
Khan, Mehran / Cao, Mingli / Ali, Majid	Effect of basalt fibers on mechanical properties of calcium carbonate whisker-steel fiber reinforced concrete	742-753
Jiang, Chaohua / Guo, Wenwen / Chen, Hui / Zhu, Yuliang / Jin, Chen	Effect of filler type and content on mechanical properties and microstructure of sand concrete made with superfine waste sand	442-449
Sun, Dandan / Wu, Kai / Shi, Huisheng / Zhang, Lintao / Zhang, Lihai	Effect of interfacial transition zone on the transport of sulfate ions in concrete	28-37
de Oliveira, Andrielli Morais / Cascudo, Oswaldo	Effect of mineral additions incorporated in concrete on thermodynamic and kinetic parameters of chloride-induced reinforcement corrosion	467-477
Girgin, Z. Canan	Effect of slag, nano clay and metakaolin on mechanical performance of basalt fibre cementitious composites	70-84
Xin, Jianda / Zhang, Guoxin / Liu, Yi / Wang, Zhenhong / Wu, Zhe	Effect of temperature history and restraint degree on cracking behavior of early-age concrete	381-390
Zou, Fubing / Tan, Hongbo / He, Xingyang / Ma, Baoguo / Deng, Xiufeng / Zhang, Ting / Mei, Junpeng / Liu, Xiaohai / Qi, Huahui	Effect of triisopropanolamine on compressive strength and hydration of steaming-cured cement-fly ash paste	836-845
Huang, Yijie / He, Xujia / Sun, Huangsheng / Sun, Yuedong / Wang, Qing	Effects of coral, recycled and natural coarse aggregates on the mechanical properties of concrete	330-347
Chang, Jun / Wang, Dan / Fang, Yanfeng	Effects of mineralogical changes in BOFS during carbonation on pH and Ca and Si leaching	584-592
Guo, Yongchang / Xie, Jianhe / Zheng, Wenyu / Li, Jianglin	Effects of steel slag as fine aggregate on static and impact behaviours of concrete	194-201
Mendes, Sandro E. S. / Oliveira, Rafael L. N. / Cremonez, Claiton / Pereira, Eduardo / Pereira, Elias / Medeiros-Junior, Ronaldo A.	Electrical resistivity as a durability parameter for concrete design: Experimental data versus estimation by mathematical model	610-620
Xu, Song / Dang, Lin / Yu, Jianying / Xue, Lihui / Hu, Changbin / Que, Yun	Evaluation of ultraviolet aging resistance of bitumen containing different organic layered double hydroxides	696-703
Orlik-Kożdoń, Bożena / Steidl, Tomasz	Experimental and analytical determination of water vapour transmission properties of recyclable insulation material	798-807
Huang, Yonghui / Liu, Guoxing / Huang, Shiping / Rao, Rui / Hu, Changfu	Experimental and finite element investigations on the temperature field of a massive bridge pier caused by the hydration heat of concrete	240-252
Zhuang, Bozhou / Liu, Yuqing / Yang, Fei	Experimental and numerical study on deformation performance of Rubber-Sleeved Stud connector under cyclic load	179-193
Cheng, Huailei / Sun, Lijun / Liu, Liping / Li, Hui	Fatigue characteristics of in-service cold recycling mixture with asphalt emulsion and HMA mixture	704-714
Wang, Xiao-hua / Zhang, She-rong / Wang, Chao / Song, Ran / Shang, Chao / Cao, Ke-lei	Fragmentation-based dynamic size effect of layered roller compacted concrete (RCC) under impact loadings	58-69
Chennouf, Nawal / Agoudjil, Boudjemma / Boudenne, Abderrahim / Benzarti, Karim / Bouras, Fathi	Hygrothermal characterization of a new bio-based construction material: Concrete reinforced with date palm fibers	348-356
Gao, Danying / Yang, Lin / Li, Ying	In situ monitoring the deterioration processes of hardened cement pastes and mortars exposed to continuous heating	515-525
Elalaoui, Oussama / Ghorbel, Elhem / Ouezdou, Mongi Ben	Influence of flame retardant addition on the durability of epoxy based polymer concrete after exposition to elevated temperature	233-239
Singh, Piyush Kumar / Suman, S. K.	Influence of graphite on the physical and rheological properties of bituminous binder before and after short-term ageing	866-873
Mohammed, Bashar S. / Achara, Bitrus Emmanuel / Liew, Mohd Shahir	The influence of high temperature on microstructural damage and residual properties of nano-silica-modified (NS-modified) self-consolidating engineering cementitious composites (SC-ECC) using response surface methodology (RSM)	450-466
Kim, Joo Hyung / Choi, Seul Woo / Lee, Kwang Myong / Choi, Young Cheol	Influence of internal curing on the pore size distribution of high strength concrete	50-57
Costa, H. / Carmo, R. N. F. / Júlio, E.	Influence of normal stress and reinforcement ratio on the behavior of LWAC interfaces	317-329
Zhao, Peng / Xu, Gang / Wang, Qing / Zhao, Juan / Liu, Xinqi	Influence of stirrup arrangements on the corrosion characteristics of reinforced concrete members	683-695
Roy, Sushanta / Miura, Taito / Nakamura, Hikaru / Yamamoto, Yoshihito	Investigation on applicability of spherical shaped EAF slag fine aggregate in pavement concrete – Fundamental and durability properties	555-568
Li, Qiang / Li, Guofen / Ma, Xiang / Zhang, Shuai	Linear viscoelastic properties of warm-mix recycled asphalt binder, mastic, and fine aggregate matrix under different aging levels	99-109
Zhang, Hongru / Ji, Tao / Zeng, Xuepeng / Yang, Zhengxian / Lin, Xujian / Liang, Yongning	Mechanical behavior of ultra-high performance concrete (UHPC) using recycled fine aggregate cured under different conditions and the mechanism based on integrated microstructural parameters	489-507
Martens, K. / Caspeele, R. / Belis, J.	Membrane action in reinforced glass beam systems: Experimental setup and results	301-316
Liu, Tiejun / Qin, Shanshan / Zou, Dujian / Song, Wen / Teng, Jun	Mesoscopic modeling method of concrete based on statistical analysis of CT images	429-441
Gwon, Seongwoo / Jang, Seung Yup / Shin, Myoungsu	Microstructure evolution and strength development of ultra rapid hardening cement modified with redispersible polymer powder	715-730
Zhang, Hongru / Ji, Tao / Liu, Hui / Su, Shangliang	Modifying recycled aggregate concrete by aggregate surface treatment using sulphoaluminate cement and basalt powder	526-537
Kim, Jaehwan / McCarter, W. John / Suryanto, Benny	Performance assessment of reinforced concrete after long-term exposure to a marine environment	569-583
Mohd Hasan, Mohd Rosli / You, Zhanping / You, Lingyun / Zhang, Ran	Performance of ethanol and ethanol-NaHCO3 based foamed WMA mixtures for low emission asphalt technology	9-19
Yin, Ke / Yang, Yao / Cheng, Y. Frank	Permeability of coal tar enamel coating to cathodic protection current on pipelines	20-27
Khatami, Hamidreza / O'Kelly, Brendan C.	Prevention of bleeding of particulate grouts using biopolymers	202-209
Cao, Ruilin / Li, Baoliang / You, Nanqiao / Zhang, Yamei / Zhang, Zuhua	Properties of alkali-activated ground granulated blast furnace slag blended with ferronickel slag	123-132
Eziefula, Uchechi G. / Ezeh, John C. / Eziefula, Bennett I.	Properties of seashell aggregate concrete: A review	287-300
Xu, Li-Yan / Nie, Xin / Tao, Mu-Xuan	Rational modeling for cracking behavior of RC slabs in composite beams subjected to a hogging moment	357-365
Ghafoori, Nader / Diawara, Hamidou / Hasnat, Ariful	Remediation of loss in flow properties of self-consolidating concrete under various combinations of transportation time and temperature	508-514
Priyadharshini, P. / Ramamurthy, K. / Robinson, R. G.	Reuse potential of stabilized excavation soil as fine aggregate in cement mortar	141-152
Wang, Dehui / Shi, Caijun / Farzadnia, Nima / Shi, Zhenguo / Jia, Huangfei	A review on effects of limestone powder on the properties of concrete	153-166
Liu, Zanqun / Hu, Wenlong / Pei, Ming / Deng, Dehua	The role of carbonation in the occurrence of MgSO4 crystallization distress on concrete	167-178
Gou, Shuangke / Ding, Ran / Fan, Jiansheng / Nie, Xin / Zhang, Jun	Seismic performance of a novel precast concrete beam-column connection using low-shrinkage engineered cementitious composites	643-656
Souza, Jéssica / Silva, Ana / de Brito, Jorge / Bauer, Elton	Service life prediction of ceramic tiling systems in Brasília-Brazil using the factor method	38-49
Ahmad, Subhan / Bhargava, Pradeep / Chourasia, Ajay	Shear transfer strength of uncracked interfaces: A simple analytical model	366-380
Breccolotti, Marco / Bonfigli, Massimo Federico / Materazzi, Annibale Luigi	SonReb concrete assessment for spatially correlated NDT data	391-402
Beltrán, Juan Felipe / Nuñez, Eduardo / Nuñez, Fernanda / Silva, Ismael / Bravo, Tomás / Moffat, Ricardo	Static response of asymmetrically damaged metallic strands: Experimental and numerical approach	538-554
Briz, E. / Biezma, M. V. / Bastidas, D. M.	Stress corrosion cracking of new 2001 lean–duplex stainless steel reinforcements in chloride contained concrete pore solution: An electrochemical study	1-8
Finozzi, I. / Saetta, A. / Budelmann, H.	Structural response of reinforcing bars affected by pitting corrosion: experimental evaluation	478-488
González, Dorys C. / Mínguez, Jesús / Vicente, Miguel A. / Cambronero, Francisco / Aragón, Guillermo	Study of the effect of the fibers' orientation on the post-cracking behavior of steel fiber reinforced concrete from wedge-splitting tests and computed tomography scanning	110-122
Ghosh, Abhishek / Ghosh, Manojit	Tensile and impact behaviour of thermo mechanically treated and micro-alloyed medium carbon steel bar	657-670
Acurio, Karen / Chico-Proano, Andrés / Martínez-Gómez, Javier / Ávila, Carlos F. / Ávila, Álavaro / Orozco, Marco	Thermal performance enhancement of organic phase change materials using spent diatomite from the palm oil bleaching process as support	633-642
Pan, Zichao / Chen, Airong / Ma, Rujin / Wang, Dalei / Tian, Hao	Three-dimensional lattice modeling of concrete carbonation at meso-scale based on reconstructed coarse aggregates	253-271
Tauste, R. / Moreno-Navarro, F. / Sol-Sánchez, M. / Rubio-Gámez, M. C.	Understanding the bitumen ageing phenomenon: A review	593-609
Rincon Romero, Acacio / Salvo, Milena / Bernardo, Enrico	Up-cycling of vitrified bottom ash from MSWI into glass-ceramic foams by means of 'inorganic gel casting' and sinter-crystallization	133-140
Yuan, Bin / Wang, Yongqing / Yang, Yuanguang / Xie, Yingquan / Li, Yang	Wellbore sealing integrity of nanosilica-latex modified cement in natural gas reservoirs with high H2S contents	621-632

Über diese
Datenseite
IssueID
21503
Veröffentlicht am:
28.11.2018
Geändert am:
30.06.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Dezember 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Dezember 2018

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.