Composite Structures - April 2022

Published:	April 2022

Articles in this Issue

Author(s)	Title	Page(s)
Kajimoto, Jumpei / Koyanagi, Jun / Maruyama, Yusuke / Kajita, Hideyuki / Matsuzaki, Ryosuke	Automated interlaminar reinforcement with thickness directional fiber arrangement for 3D printing	115321
Yuan, Jian-Song / Xin, Zhongyuan / Gao, Danying / Zhu, Haitang / Chen, Gang / Hadi, Muhammad N. S. / Zeng, Jun-Jie	Behavior of hollow concrete-filled rectangular GFRP tube beams under bending	115348
Gao, Teng / Li, Changhe / Wang, Yiqi / Liu, Xueshu / An, Qinglong / Li, Hao Nan / Zhang, Yanbin / Cao, Huajun / Liu, Bo / Wang, Dazhong / Said, Zafar / Debnath, Sujan / Jamil, Muhammad / Ali, Hafiz Muhammad / Sharma, Shubham	Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression	115232
Yin, Hanfeng / Zhou, Jun / Wen, Guilin / Wu, Zhantao	Crushing analysis and optimization for bio-inspired hierarchical 3D cellular structure	115333
Li, Bo / Liu, Hua / Zhang, Qiao / Yang, Xianfeng / Yang, Jialing	Crushing behavior and energy absorption of a bio-inspired bi-directional corrugated lattice under quasi-static compression load	115315
Hassani, Sahar / Mousavi, Mohsen / Gandomi, Amir H.	Damage detection of composite laminate structures using VMD of FRF contaminated by high percentage of noise	115243
Lee, Ji Soo / Kim, Minkook / Lee, Min Wook	Debonding-on-demand adhesive film using internal Joule heating effect of the steel-aramid braided reinforcement	115290
Launay, A. / Keryvin, V. / Grandidier, J.-C. / Mechin, P.-Y. / Balze, R.	Design of a set-up for measuring the residual compressive strength after high load and high cycle compression fatigue on CFRP	115294
Tan, Xiaojun / Wang, Bing / Wang, Lianchao / Zhu, Shaowei / Chen, Shuai / Yao, Kaili / Xu, Peifei	Effect of beam configuration on its multistable and negative stiffness properties	115308
Gomez, Javier / Barris, Cristina / Jahani, Younes / Baena, Marta / Torres, Lluis	The effect of steady and cyclic environmental conditions on the tensile behaviour of a structural adhesive under sustained loading	115287
Loh, Thomas W. / Kandare, Everson / Nguyen, Kate T. Q.	The effect of thickness on the compression failure of composite laminates in fire	115334
Zhang, Zhi-jia / Li, Bin-chao / Wang, Yong-jing / Zhang, Wang / Yue, Chen-chong / Zhang, Qian-Cheng / Jin, Feng	Elevated temperature compression behaviors of 3D printed hollow pyramidal lattice sandwich structure reinforced by truncated square honeycomb	115307
Arunkumar, M. P. / Bhagat, Vinod / Geng, Qian / Li, Yueming / Pitchaimani, Jeyaraj	An exact solution for vibro-acoustic response of smart sandwich panels with MEE composite Layer	115201
Ray, M. C. / Jha, B. K.	Exact solutions for bimorph cross-ply and antisymmetric angle-ply plate piezoelectric energy harvesters	115261
Ma, Mingze / Yao, Weixing / Jiang, Wen / Jin, Wei / Chen, Yan / Li, Piao / Huang, Jie	Fatigue of composite honeycomb sandwich panels under random vibration load	115296
Mohammadi, Mohsen / Bai, Yu-Lei / Yang, Hong-Long / Lin, Guan / Dai, Jian-Guo / Zhang, Yu-Feng	FE modeling of Non-circular LRS FRP-confined concrete columns	115314
Gopinath, G. / Batra, R. C.	Finite element method based micromechanical methodology for homogenizing fiber/fabrics-reinforced composites and their progressive failure	115279
Morozov, E. V. / Lopatin, A. V. / Khakhlenkova, A. A.	Finite-element modelling, analysis and design of anisogrid composite lattice spoke of an umbrella-type deployable reflector of space antenna	115323
Moita, José S. / Araújo, Aurélio L. / Franco Correia, Victor / Soares, Cristóvão M. Mota	Free vibrations analysis of composite and hybrid axisymmetric shells	115267
Jang, Daeik / Choi, B. H. / Yoon, H. N. / Yang, Beomjoo / Lee, H. K.	Improved electromagnetic wave shielding capability of carbonyl iron powder-embedded lightweight CFRP composites	115326
Monticeli, Francisco Maciel / Voorwald, Herman J. C. / Cioffi, Maria Odila H.	The influence of carbon-glass/epoxy hybrid composite under mode I fatigue loading: Hybrid fiber bridging zone model	115274
Monticeli, Francisco M. / Voorwald, Herman Jacobus Cornelis / Cioffi, Maria Odila Hilário	The influence of carbon-glass/epoxy hybrid composite under mode I fatigue loading: Physical-based characterization	115291
Peinado, Jairo / Jiao-Wang, Liu / Olmedo, Álvaro / Santiuste, Carlos	Influence of stacking sequence on the impact behaviour of UHMWPE soft armor panels	115365
Avey, M. / Fantuzzi, N. / Sofiyev, A. H. / Kuruoglu, N.	Influences of elastic foundations on the nonlinear free vibration of composite shells containing carbon nanotubes within shear deformation theory	115288
Abdollahi, Mahdieh / Saidi, Ali Reza / Bahaadini, Reza	An investigation of aero-thermo-elastic flutter and divergence of functionally graded porous skew plates	115264
Smojver, Ivica / Ivančević, Darko / Brezetić, Dominik	Modelling of micro-damage and intrinsic self-healing in unidirectional CFRP composite structures	115266
Xu, Qishan / Qiao, Jing / Ren, Zhuang / Sun, Jiayue / Zhang, Guangyu / Li, Longqiu	Multi synergistic coupling design for broadband sound absorption based on compact porous composite embedded with massless membrane resonator	115312
Li, Zeyang / Lu, Jiahai / Qiu, Rongying / Liu, Zhao / Zhu, Ping	Multiscale modeling based failure criterion of injection molded SFRP composites considering skin-core-skin layered microstructure and variable parameters	115277
Cabral, Myrella V. / Marques, Flávio D. / Ferreira, Antonio J. M.	Nonlinear supersonic post-flutter response of two-bay composite laminate curved panels	115128
Han, Jiangbo / Wang, Rongqiao / Hu, Dianyin / Bao, Jianguang / Liu, Xi / Guo, Xiaojun	A novel integrated model for 3D braided composites considering stochastic characteristics	115309
Rani, Anju / Mulaveesala, Ravibabu	Novel pulse compression favorable excitation schemes for infrared non-destructive testing and evaluation of glass fibre reinforced polymer materials	115338
Zhang, Wei / Huang, Zhenyu / Ye, Jianqiao	Numerical-based analytical model of double-layer steel-LHDCC sandwich composites under punching loads	115271
Jiao, Junrui / Chen, Tinggui / Yu, Dejie	Observation of topological valley waveguide transport of elastic waves in snowflake plates	115297
Duan, S. Y. / Li, Y. L. / Wang, F. / Wei, K. / Han, X. / Liu, G. R.	On direct weight inverse approach for identifying composite parameters based on two-way TrumpetNets	115251
Shao, Mingyang / Zhou, Guangming / Chen, Mudan / Xing, Dandan / Hu, Fangtian / Kuang, Ning / Cai, Deng'an	On mode I/II interlaminar fracture toughness of double-sided-loop 2D woven laminated composites	115311
Javani, Mehran / Kiani, Yaser / Eslami, Mohammad Reza	On the free vibrations of FG-GPLRC folded plates using GDQE procedure	115273
Zamani, Mohammad Hossein / Heidari-Rarani, Mohammad / Torabi, Keivan	Optimal design of a novel graded auxetic honeycomb core for sandwich beams under bending using digital image correlation (DIC)	115310
Othmani, Cherif / Zhang, He / Lü, Chaofeng / Wang, Yan Qing / Reza Kamali, Ali	Orthogonal polynomial methods for modeling elastodynamic wave propagation in elastic, piezoelectric and magneto-electro-elastic composites—A review	115245
Ko, Young-Hoon / Che, Jia-le / Chang, Seung-Hwan	Performance of liquid crystalline polyester composite burn-in board connectors under cyclic high-temperature condition	115325
Tan, Wei / Martínez-Pañeda, Emilio	Phase field fracture predictions of microscopic bridging behaviour of composite materials	115242
Yang, Zheng / Kang, Ge / Liu, Rui / Chen, Pengwan	Predicting the mechanical behaviour of highly particle-filled polymer composites using the nonlinear finite element method	115275
Roy Xu, L. / Karakoҫ, Alp / Flores, Mark / Ning, Haibin / Taciroglu, Ertugrul	Predicting the upper-bound of interlaminar impact damage in structural composites through a combined nanoindentation and computational mechanics technique	115110
Tang, Juan / Zhou, Zhiping / Chen, Hao / Wang, Shiyou / Gutiérrez, Asier	Research on the lightweight design of GFRP fabric pultrusion panels for railway vehicle	115221
Zhang, Feng / Pan, Fei / Chen, Yuli	Revisiting the stiffness of lattice plates with micromechanics modeling	115276
Kumar Dash, Anil / Prabhu, Joseph / Nagarajan, Vishwanath	Stochastic finite element analysis of composite cycloidal propeller blade during crash-stop ship maneuver	115306
Chen, Hongcheng / Ta, Wurui / Zhou, Youhe	Stress transfer mechanism and shear strength of multilayer composite superconducting tape	115336
Lin, Minxiao / Guo, Shijun / He, Shun / Li, Wenhao / Yang, Daqing	Structure health monitoring of a composite wing based on flight load and strain data using deep learning method	115305
Koley, S. / Upadhyay, C. S. / Mohite, P. M.	Study of boundary layer effects at ply interfaces of laminated composites using homogenization theory	115217
Hou, Wenbin / Shen, Yuanxing / Jiang, Kai / Wang, Changsheng	Study on mechanical properties of carbon fiber honeycomb curved sandwich structure and its application in engine hood	115302
Babaei, Hadi	Thermomechanical analysis of snap-buckling phenomenon in long FG-CNTRC cylindrical panels resting on nonlinear elastic foundation	115199
Deng, Jian / Xue, Pu / Yin, Qiao Zhi / Lu, Tian Jian / Wang, Xin Wei	A three-dimensional damage analysis framework for fiber-reinforced composite laminates	115313
Sapozhnikov, S. B. / Zhikharev, M. V. / Zubova, E. M.	Ultra-low cycle three-point bending fatigue of glass fabric reinforced plastic	115293

About this
data sheet
IssueID
61236
Published on:
17/02/2022
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - April 2022

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - April 2022

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.