Composite Structures - avril 2022

Publié:	avril 2022

Articles dans ce numéro

Auteur(s)	Titre	Page(s)
Kajimoto, Jumpei / Koyanagi, Jun / Maruyama, Yusuke / Kajita, Hideyuki / Matsuzaki, Ryosuke	Automated interlaminar reinforcement with thickness directional fiber arrangement for 3D printing	115321
Yuan, Jian-Song / Xin, Zhongyuan / Gao, Danying / Zhu, Haitang / Chen, Gang / Hadi, Muhammad N. S. / Zeng, Jun-Jie	Behavior of hollow concrete-filled rectangular GFRP tube beams under bending	115348
Gao, Teng / Li, Changhe / Wang, Yiqi / Liu, Xueshu / An, Qinglong / Li, Hao Nan / Zhang, Yanbin / Cao, Huajun / Liu, Bo / Wang, Dazhong / Said, Zafar / Debnath, Sujan / Jamil, Muhammad / Ali, Hafiz Muhammad / Sharma, Shubham	Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression	115232
Yin, Hanfeng / Zhou, Jun / Wen, Guilin / Wu, Zhantao	Crushing analysis and optimization for bio-inspired hierarchical 3D cellular structure	115333
Li, Bo / Liu, Hua / Zhang, Qiao / Yang, Xianfeng / Yang, Jialing	Crushing behavior and energy absorption of a bio-inspired bi-directional corrugated lattice under quasi-static compression load	115315
Hassani, Sahar / Mousavi, Mohsen / Gandomi, Amir H.	Damage detection of composite laminate structures using VMD of FRF contaminated by high percentage of noise	115243
Lee, Ji Soo / Kim, Minkook / Lee, Min Wook	Debonding-on-demand adhesive film using internal Joule heating effect of the steel-aramid braided reinforcement	115290
Launay, A. / Keryvin, V. / Grandidier, J.-C. / Mechin, P.-Y. / Balze, R.	Design of a set-up for measuring the residual compressive strength after high load and high cycle compression fatigue on CFRP	115294
Tan, Xiaojun / Wang, Bing / Wang, Lianchao / Zhu, Shaowei / Chen, Shuai / Yao, Kaili / Xu, Peifei	Effect of beam configuration on its multistable and negative stiffness properties	115308
Gomez, Javier / Barris, Cristina / Jahani, Younes / Baena, Marta / Torres, Lluis	The effect of steady and cyclic environmental conditions on the tensile behaviour of a structural adhesive under sustained loading	115287
Loh, Thomas W. / Kandare, Everson / Nguyen, Kate T. Q.	The effect of thickness on the compression failure of composite laminates in fire	115334
Zhang, Zhi-jia / Li, Bin-chao / Wang, Yong-jing / Zhang, Wang / Yue, Chen-chong / Zhang, Qian-Cheng / Jin, Feng	Elevated temperature compression behaviors of 3D printed hollow pyramidal lattice sandwich structure reinforced by truncated square honeycomb	115307
Arunkumar, M. P. / Bhagat, Vinod / Geng, Qian / Li, Yueming / Pitchaimani, Jeyaraj	An exact solution for vibro-acoustic response of smart sandwich panels with MEE composite Layer	115201
Ray, M. C. / Jha, B. K.	Exact solutions for bimorph cross-ply and antisymmetric angle-ply plate piezoelectric energy harvesters	115261
Ma, Mingze / Yao, Weixing / Jiang, Wen / Jin, Wei / Chen, Yan / Li, Piao / Huang, Jie	Fatigue of composite honeycomb sandwich panels under random vibration load	115296
Mohammadi, Mohsen / Bai, Yu-Lei / Yang, Hong-Long / Lin, Guan / Dai, Jian-Guo / Zhang, Yu-Feng	FE modeling of Non-circular LRS FRP-confined concrete columns	115314
Gopinath, G. / Batra, R. C.	Finite element method based micromechanical methodology for homogenizing fiber/fabrics-reinforced composites and their progressive failure	115279
Morozov, E. V. / Lopatin, A. V. / Khakhlenkova, A. A.	Finite-element modelling, analysis and design of anisogrid composite lattice spoke of an umbrella-type deployable reflector of space antenna	115323
Moita, José S. / Araújo, Aurélio L. / Franco Correia, Victor / Soares, Cristóvão M. Mota	Free vibrations analysis of composite and hybrid axisymmetric shells	115267
Jang, Daeik / Choi, B. H. / Yoon, H. N. / Yang, Beomjoo / Lee, H. K.	Improved electromagnetic wave shielding capability of carbonyl iron powder-embedded lightweight CFRP composites	115326
Monticeli, Francisco Maciel / Voorwald, Herman J. C. / Cioffi, Maria Odila H.	The influence of carbon-glass/epoxy hybrid composite under mode I fatigue loading: Hybrid fiber bridging zone model	115274
Monticeli, Francisco M. / Voorwald, Herman Jacobus Cornelis / Cioffi, Maria Odila Hilário	The influence of carbon-glass/epoxy hybrid composite under mode I fatigue loading: Physical-based characterization	115291
Peinado, Jairo / Jiao-Wang, Liu / Olmedo, Álvaro / Santiuste, Carlos	Influence of stacking sequence on the impact behaviour of UHMWPE soft armor panels	115365
Avey, M. / Fantuzzi, N. / Sofiyev, A. H. / Kuruoglu, N.	Influences of elastic foundations on the nonlinear free vibration of composite shells containing carbon nanotubes within shear deformation theory	115288
Abdollahi, Mahdieh / Saidi, Ali Reza / Bahaadini, Reza	An investigation of aero-thermo-elastic flutter and divergence of functionally graded porous skew plates	115264
Smojver, Ivica / Ivančević, Darko / Brezetić, Dominik	Modelling of micro-damage and intrinsic self-healing in unidirectional CFRP composite structures	115266
Xu, Qishan / Qiao, Jing / Ren, Zhuang / Sun, Jiayue / Zhang, Guangyu / Li, Longqiu	Multi synergistic coupling design for broadband sound absorption based on compact porous composite embedded with massless membrane resonator	115312
Li, Zeyang / Lu, Jiahai / Qiu, Rongying / Liu, Zhao / Zhu, Ping	Multiscale modeling based failure criterion of injection molded SFRP composites considering skin-core-skin layered microstructure and variable parameters	115277
Cabral, Myrella V. / Marques, Flávio D. / Ferreira, Antonio J. M.	Nonlinear supersonic post-flutter response of two-bay composite laminate curved panels	115128
Han, Jiangbo / Wang, Rongqiao / Hu, Dianyin / Bao, Jianguang / Liu, Xi / Guo, Xiaojun	A novel integrated model for 3D braided composites considering stochastic characteristics	115309
Rani, Anju / Mulaveesala, Ravibabu	Novel pulse compression favorable excitation schemes for infrared non-destructive testing and evaluation of glass fibre reinforced polymer materials	115338
Zhang, Wei / Huang, Zhenyu / Ye, Jianqiao	Numerical-based analytical model of double-layer steel-LHDCC sandwich composites under punching loads	115271
Jiao, Junrui / Chen, Tinggui / Yu, Dejie	Observation of topological valley waveguide transport of elastic waves in snowflake plates	115297
Duan, S. Y. / Li, Y. L. / Wang, F. / Wei, K. / Han, X. / Liu, G. R.	On direct weight inverse approach for identifying composite parameters based on two-way TrumpetNets	115251
Shao, Mingyang / Zhou, Guangming / Chen, Mudan / Xing, Dandan / Hu, Fangtian / Kuang, Ning / Cai, Deng'an	On mode I/II interlaminar fracture toughness of double-sided-loop 2D woven laminated composites	115311
Javani, Mehran / Kiani, Yaser / Eslami, Mohammad Reza	On the free vibrations of FG-GPLRC folded plates using GDQE procedure	115273
Zamani, Mohammad Hossein / Heidari-Rarani, Mohammad / Torabi, Keivan	Optimal design of a novel graded auxetic honeycomb core for sandwich beams under bending using digital image correlation (DIC)	115310
Othmani, Cherif / Zhang, He / Lü, Chaofeng / Wang, Yan Qing / Reza Kamali, Ali	Orthogonal polynomial methods for modeling elastodynamic wave propagation in elastic, piezoelectric and magneto-electro-elastic composites—A review	115245
Ko, Young-Hoon / Che, Jia-le / Chang, Seung-Hwan	Performance of liquid crystalline polyester composite burn-in board connectors under cyclic high-temperature condition	115325
Tan, Wei / Martínez-Pañeda, Emilio	Phase field fracture predictions of microscopic bridging behaviour of composite materials	115242
Yang, Zheng / Kang, Ge / Liu, Rui / Chen, Pengwan	Predicting the mechanical behaviour of highly particle-filled polymer composites using the nonlinear finite element method	115275
Roy Xu, L. / Karakoҫ, Alp / Flores, Mark / Ning, Haibin / Taciroglu, Ertugrul	Predicting the upper-bound of interlaminar impact damage in structural composites through a combined nanoindentation and computational mechanics technique	115110
Tang, Juan / Zhou, Zhiping / Chen, Hao / Wang, Shiyou / Gutiérrez, Asier	Research on the lightweight design of GFRP fabric pultrusion panels for railway vehicle	115221
Zhang, Feng / Pan, Fei / Chen, Yuli	Revisiting the stiffness of lattice plates with micromechanics modeling	115276
Kumar Dash, Anil / Prabhu, Joseph / Nagarajan, Vishwanath	Stochastic finite element analysis of composite cycloidal propeller blade during crash-stop ship maneuver	115306
Chen, Hongcheng / Ta, Wurui / Zhou, Youhe	Stress transfer mechanism and shear strength of multilayer composite superconducting tape	115336
Lin, Minxiao / Guo, Shijun / He, Shun / Li, Wenhao / Yang, Daqing	Structure health monitoring of a composite wing based on flight load and strain data using deep learning method	115305
Koley, S. / Upadhyay, C. S. / Mohite, P. M.	Study of boundary layer effects at ply interfaces of laminated composites using homogenization theory	115217
Hou, Wenbin / Shen, Yuanxing / Jiang, Kai / Wang, Changsheng	Study on mechanical properties of carbon fiber honeycomb curved sandwich structure and its application in engine hood	115302
Babaei, Hadi	Thermomechanical analysis of snap-buckling phenomenon in long FG-CNTRC cylindrical panels resting on nonlinear elastic foundation	115199
Deng, Jian / Xue, Pu / Yin, Qiao Zhi / Lu, Tian Jian / Wang, Xin Wei	A three-dimensional damage analysis framework for fiber-reinforced composite laminates	115313
Sapozhnikov, S. B. / Zhikharev, M. V. / Zubova, E. M.	Ultra-low cycle three-point bending fatigue of glass fabric reinforced plastic	115293

Informations
sur cette fiche
IssueID
61236
Publié(e) le:
17.02.2022
Modifié(e) le:
09.05.2022

Publicité

Structurae coopère avec

International Association for Bridge and Structural Engineering (IABSE)

Publicité

Composite Structures - avril 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - avril 2022

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.