Composite Structures - v. 94, n. 2 (January 2012)

Published:	January 2012

Articles in this Issue

Author(s)	Title	Page(s)
Song, Zhi-Guang / Li, Feng-Ming	Active aeroelastic flutter analysis and vibration control of supersonic composite laminated plate	702-713
Aguiar, R. M. / Moleiro, F. / Mota Soares, C. M.	Assessment of mixed and displacement-based models for static analysis of composite beams of different cross-sections	601-616
Mantari, J. L. / Oktem, A. S. / Guedes Soares, C.	Bending response of functionally graded plates by using a new higher order shear deformation theory	714-723
Lopatin, A. V. / Morozov, E. V.	Buckling of a composite cantilever circular cylindrical shell subjected to uniform external lateral pressure	553-562
Ibrahim, S. M. / Carrera, E. / Petrolo, M. / Zappino, E.	Buckling of composite thin walled beams by refined theory	563-570
Shadmehri, F. / Hoa, S. V. / Hojjati, M.	Buckling of conical composite shells	787-792
Xiong, Jian / Vaziri, Ashkan / Ma, Li / Papadopoulos, Jim / Wu, Linzhi	Compression and impact testing of two-layer composite pyramidal-core sandwich panels	793-801
Yu, Young Ho / Kim, Bu Gi / Lee, Dai Gil	Cryogenic reliability of composite insulation panels for liquefied natural gas (LNG) ships	462-468
Batra, R. C. / Gopinath, G. / Zheng, J. Q.	Damage and failure in low energy impact of fiber-reinforced polymeric composite laminates	540-547
Naito, Kimiyoshi / Kagawa, Yutaka / Kurihara, Kanshi	Dielectric properties and noncontact damage detection of plain-woven fabric glass fiber reinforced epoxy matrix composites using millimeter wavelength microwave	695-701
Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.	Double shear tests to evaluate the bond strength between GFRP/concrete elements	681-694
Ataş, A. / Mohamed, G. F. / Soutis, C.	Effect of clamping force on the delamination onset and growth in bolted composite laminates	548-552
Liu, B. / Xing, Y. F. / Qatu, M. S. / Ferreira, A. J. M.	Exact characteristic equations for free vibrations of thin orthotropic circular cylindrical shells	484-493
Davidson, Paul / Waas, Anthony M. / Yerramalli, Chandra S.	Experimental determination of validated, critical interfacial modes I and II energy release rates in a composite sandwich panel	477-483
Al-Zubaidy, Haider / Al-Mahaidi, Riadh / Zhao, Xiao-Ling	Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads	510-518
Nguyen, Khanh-Hung / Park, Yong-Bin / Kweon, Jin-Hwe / Choi, Jin-Ho	Failure behaviour of foam-based sandwich joints under pull-out testing	617-624
Černý, Ivo / Mayer, Rayner M.	Fatigue of selected GRP composite components and joints with damage evaluation	664-670
Larbi, W. / Deü, J.-F. / Ohayon, R.	Finite element formulation of smart piezoelectric composite plates coupled with acoustic fluid	501-509
Zhang, H. W. / Smith, S. T.	FRP-to-concrete joint assemblages anchored with multiple FRP anchors	403-414
Zhou, Ying-Wu / Wu, Yu-Fei	General model for constitutive relationships of concrete and its composite structures	580-592
Perret, Adrien / Mistou, Sébastien / Fazzini, Marina / Brault, Romain	Global behaviour of a composite stiffened panel in buckling. Part 2: Experimental investigation	376-385
Kaminski, M. / Leśniak, M.	Homogenization of metallic fiber-reinforced composites under stochastic ageing	386-393
Panciroli, R. / Abrate, S. / Minak, G. / Zucchelli, A.	Hydroelasticity in water-entry problems: Comparison between experimental and SPH results	532-539
Palazzetti, R. / Zucchelli, A. / Gualandi, C. / Focarete, M. L. / Donati, L. / Minak, G. / Ramakrishna, S.	Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates	571-579
Leong, Martin / Overgaard, Lars C. T. / Thomsen, Ole T. / Lund, Erik / Daniel, Isaac M.	Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades	768-778
Tashan, Jawdat / Al-Mahaidi, Riadh	Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography	519-531
Obradovic, Jovan / Boria, Simonetta / Belingardi, Giovanni	Lightweight design and crash analysis of composite frontal impact energy absorbing structures	423-430
Totaro, G.	Local buckling modelling of isogrid and anisogrid lattice cylindrical shells with triangular cells	446-452
Frieden, Jeannot / Cugnoni, Joël / Botsis, John / Gmür, Thomas	Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part I: Impact detection and localization	438-445
Frieden, Jeannot / Cugnoni, Joël / Botsis, John / Gmür, Thomas	Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part II: Damage identification	593-600
O'Loinsigh, Cian / Oudjene, Marc / Shotton, Elisabeth / Pizzi, Antonio / Fanning, Paul	Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels	313-321
Tran, T. D. / Kelly, D. / Prusty, B. G. / Gosse, J. H. / Christensen, S.	Micromechanical modelling for onset of distortional matrix damage of fiber reinforced composite materials	745-757
Murari, V. / Upadhyay, C. S.	Micromechanics based ply level material degradation model for unidirectional composites	671-680
Cook, Alden C. / Vel, Senthil S.	Multiscale analysis of laminated plates with integrated piezoelectric fiber composite actuators	322-336
Ribeiro, Marcelo Leite / Tita, Volnei / Vandepitte, Dirk	A new damage model for composite laminates	635-642
Quinteros, Ricardo D. / Oller, Sergio / Nallim, Liz G.	Nonlinear homogenization techniques to solve masonry structures problems	724-730
Aksoylar, Cenk / Ömercikoğlu, Akın / Mecitoğlu, Zahit / Omurtag, Mehmet H.	Nonlinear transient analysis of FGM and FML plates under blast loads by experimental and mixed FE methods	731-744
Gherlone, M. / Iurlaro, L. / Di Sciuva, M.	A novel algorithm for shape parameter selection in radial basis functions collocation method	453-461
Chishti, Maajid / Wang, Chun H. / Thomson, Rodney S. / Orifici, Adrian C.	Numerical analysis of damage progression and strength of countersunk composite joints	643-653
Demasi, Luciano	Partially Zig-Zag Advanced Higher Order Shear Deformation Theories Based on the Generalized Unified Formulation	363-375
Ameli, A. / Datla, N. V. / Azari, S. / Papini, M. / Spelt, J. K.	Prediction of environmental degradation of closed adhesive joints using data from open-faced specimens	779-786
Cinefra, M. / Carrera, E. / Della Croce, L. / Chinosi, C.	Refined shell elements for the analysis of functionally graded structures	415-422
Kriegesmann, Benedikt / Jansen, Eelco L. / Rolfes, Raimund	Semi-analytic probabilistic analysis of axially compressed stiffened composite panels	654-663
Asadi, Ebrahim / Wang, Wenchao / Qatu, Mohamad S.	Static and vibration analyses of thick deep laminated cylindrical shells using 3D and various shear deformation theories	494-500
Kamiński, Marcin	Stochastic Boundary Element Method analysis of the interface defects in composite materials	394-402
Park, Yong-Bin / Lee, Byeong-Hee / Kweon, Jin-Hwe / Choi, Jin-Ho / Choi, Ik-Hyeon	The strength of composite bonded T-joints transversely reinforced by carbon pins	625-634
Sexton, Anthony / Cantwell, Wesley / Kalyanasundaram, Shankar	Stretch forming studies on a fibre metal laminate based on a self-reinforcing polypropylene composite	431-437
Wang, S. / Harvey, C.	A theory of one-dimensional fracture	758-767
Chaudhuri, Reaz A. / Yoon, Jinyong	Three-dimensional asymptotic mode I/II stress fields at the front of interfacial crack/anticrack discontinuities in trimaterial bonded plates	351-362
Yoon, Jinyong / Chaudhuri, Reaz A.	Three-dimensional asymptotic stress fields at the front of a trimaterial junction	337-350
Kim, Ki Hyun / Yoon, Soon Ho / Lee, Dai Gil	Vibration isolation of LNG containment systems due to sloshing with glass fiber composite	469-476

About this
data sheet
IssueID
37904
Published on:
23/10/2020
Last updated on:
23/10/2020

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - v. 94, n. 2 (January 2012)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - v. 94, n. 2 (January 2012)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.