Composite Structures - v. 94, n. 2 (janvier 2012)

Publié:	janvier 2012

Auteur(s)	Titre	Page(s)
Song, Zhi-Guang / Li, Feng-Ming	Active aeroelastic flutter analysis and vibration control of supersonic composite laminated plate	702-713
Aguiar, R. M. / Moleiro, F. / Mota Soares, C. M.	Assessment of mixed and displacement-based models for static analysis of composite beams of different cross-sections	601-616
Mantari, J. L. / Oktem, A. S. / Guedes Soares, C.	Bending response of functionally graded plates by using a new higher order shear deformation theory	714-723
Lopatin, A. V. / Morozov, E. V.	Buckling of a composite cantilever circular cylindrical shell subjected to uniform external lateral pressure	553-562
Ibrahim, S. M. / Carrera, E. / Petrolo, M. / Zappino, E.	Buckling of composite thin walled beams by refined theory	563-570
Shadmehri, F. / Hoa, S. V. / Hojjati, M.	Buckling of conical composite shells	787-792
Xiong, Jian / Vaziri, Ashkan / Ma, Li / Papadopoulos, Jim / Wu, Linzhi	Compression and impact testing of two-layer composite pyramidal-core sandwich panels	793-801
Yu, Young Ho / Kim, Bu Gi / Lee, Dai Gil	Cryogenic reliability of composite insulation panels for liquefied natural gas (LNG) ships	462-468
Batra, R. C. / Gopinath, G. / Zheng, J. Q.	Damage and failure in low energy impact of fiber-reinforced polymeric composite laminates	540-547
Naito, Kimiyoshi / Kagawa, Yutaka / Kurihara, Kanshi	Dielectric properties and noncontact damage detection of plain-woven fabric glass fiber reinforced epoxy matrix composites using millimeter wavelength microwave	695-701
Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.	Double shear tests to evaluate the bond strength between GFRP/concrete elements	681-694
Ataş, A. / Mohamed, G. F. / Soutis, C.	Effect of clamping force on the delamination onset and growth in bolted composite laminates	548-552
Liu, B. / Xing, Y. F. / Qatu, M. S. / Ferreira, A. J. M.	Exact characteristic equations for free vibrations of thin orthotropic circular cylindrical shells	484-493
Davidson, Paul / Waas, Anthony M. / Yerramalli, Chandra S.	Experimental determination of validated, critical interfacial modes I and II energy release rates in a composite sandwich panel	477-483
Al-Zubaidy, Haider / Al-Mahaidi, Riadh / Zhao, Xiao-Ling	Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads	510-518
Nguyen, Khanh-Hung / Park, Yong-Bin / Kweon, Jin-Hwe / Choi, Jin-Ho	Failure behaviour of foam-based sandwich joints under pull-out testing	617-624
Černý, Ivo / Mayer, Rayner M.	Fatigue of selected GRP composite components and joints with damage evaluation	664-670
Larbi, W. / Deü, J.-F. / Ohayon, R.	Finite element formulation of smart piezoelectric composite plates coupled with acoustic fluid	501-509
Zhang, H. W. / Smith, S. T.	FRP-to-concrete joint assemblages anchored with multiple FRP anchors	403-414
Zhou, Ying-Wu / Wu, Yu-Fei	General model for constitutive relationships of concrete and its composite structures	580-592
Perret, Adrien / Mistou, Sébastien / Fazzini, Marina / Brault, Romain	Global behaviour of a composite stiffened panel in buckling. Part 2: Experimental investigation	376-385
Kaminski, M. / Leśniak, M.	Homogenization of metallic fiber-reinforced composites under stochastic ageing	386-393
Panciroli, R. / Abrate, S. / Minak, G. / Zucchelli, A.	Hydroelasticity in water-entry problems: Comparison between experimental and SPH results	532-539
Palazzetti, R. / Zucchelli, A. / Gualandi, C. / Focarete, M. L. / Donati, L. / Minak, G. / Ramakrishna, S.	Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates	571-579
Leong, Martin / Overgaard, Lars C. T. / Thomsen, Ole T. / Lund, Erik / Daniel, Isaac M.	Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades	768-778
Tashan, Jawdat / Al-Mahaidi, Riadh	Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography	519-531
Obradovic, Jovan / Boria, Simonetta / Belingardi, Giovanni	Lightweight design and crash analysis of composite frontal impact energy absorbing structures	423-430
Totaro, G.	Local buckling modelling of isogrid and anisogrid lattice cylindrical shells with triangular cells	446-452
Frieden, Jeannot / Cugnoni, Joël / Botsis, John / Gmür, Thomas	Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part I: Impact detection and localization	438-445
Frieden, Jeannot / Cugnoni, Joël / Botsis, John / Gmür, Thomas	Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part II: Damage identification	593-600
O'Loinsigh, Cian / Oudjene, Marc / Shotton, Elisabeth / Pizzi, Antonio / Fanning, Paul	Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels	313-321
Tran, T. D. / Kelly, D. / Prusty, B. G. / Gosse, J. H. / Christensen, S.	Micromechanical modelling for onset of distortional matrix damage of fiber reinforced composite materials	745-757
Murari, V. / Upadhyay, C. S.	Micromechanics based ply level material degradation model for unidirectional composites	671-680
Cook, Alden C. / Vel, Senthil S.	Multiscale analysis of laminated plates with integrated piezoelectric fiber composite actuators	322-336
Ribeiro, Marcelo Leite / Tita, Volnei / Vandepitte, Dirk	A new damage model for composite laminates	635-642
Quinteros, Ricardo D. / Oller, Sergio / Nallim, Liz G.	Nonlinear homogenization techniques to solve masonry structures problems	724-730
Aksoylar, Cenk / Ömercikoğlu, Akın / Mecitoğlu, Zahit / Omurtag, Mehmet H.	Nonlinear transient analysis of FGM and FML plates under blast loads by experimental and mixed FE methods	731-744
Gherlone, M. / Iurlaro, L. / Di Sciuva, M.	A novel algorithm for shape parameter selection in radial basis functions collocation method	453-461
Chishti, Maajid / Wang, Chun H. / Thomson, Rodney S. / Orifici, Adrian C.	Numerical analysis of damage progression and strength of countersunk composite joints	643-653
Demasi, Luciano	Partially Zig-Zag Advanced Higher Order Shear Deformation Theories Based on the Generalized Unified Formulation	363-375
Ameli, A. / Datla, N. V. / Azari, S. / Papini, M. / Spelt, J. K.	Prediction of environmental degradation of closed adhesive joints using data from open-faced specimens	779-786
Cinefra, M. / Carrera, E. / Della Croce, L. / Chinosi, C.	Refined shell elements for the analysis of functionally graded structures	415-422
Kriegesmann, Benedikt / Jansen, Eelco L. / Rolfes, Raimund	Semi-analytic probabilistic analysis of axially compressed stiffened composite panels	654-663
Asadi, Ebrahim / Wang, Wenchao / Qatu, Mohamad S.	Static and vibration analyses of thick deep laminated cylindrical shells using 3D and various shear deformation theories	494-500
Kamiński, Marcin	Stochastic Boundary Element Method analysis of the interface defects in composite materials	394-402
Park, Yong-Bin / Lee, Byeong-Hee / Kweon, Jin-Hwe / Choi, Jin-Ho / Choi, Ik-Hyeon	The strength of composite bonded T-joints transversely reinforced by carbon pins	625-634
Sexton, Anthony / Cantwell, Wesley / Kalyanasundaram, Shankar	Stretch forming studies on a fibre metal laminate based on a self-reinforcing polypropylene composite	431-437
Wang, S. / Harvey, C.	A theory of one-dimensional fracture	758-767
Chaudhuri, Reaz A. / Yoon, Jinyong	Three-dimensional asymptotic mode I/II stress fields at the front of interfacial crack/anticrack discontinuities in trimaterial bonded plates	351-362
Yoon, Jinyong / Chaudhuri, Reaz A.	Three-dimensional asymptotic stress fields at the front of a trimaterial junction	337-350
Kim, Ki Hyun / Yoon, Soon Ho / Lee, Dai Gil	Vibration isolation of LNG containment systems due to sloshing with glass fiber composite	469-476

Auteur(s)

Titre

Page(s)

Song, Zhi-Guang / Li, Feng-Ming

Active aeroelastic flutter analysis and vibration control of supersonic composite laminated plate

702-713

Aguiar, R. M. / Moleiro, F. / Mota Soares, C. M.

Assessment of mixed and displacement-based models for static analysis of composite beams of different cross-sections

601-616

Mantari, J. L. / Oktem, A. S. / Guedes Soares, C.

Bending response of functionally graded plates by using a new higher order shear deformation theory

714-723

Lopatin, A. V. / Morozov, E. V.

Buckling of a composite cantilever circular cylindrical shell subjected to uniform external lateral pressure

553-562

Ibrahim, S. M. / Carrera, E. / Petrolo, M. / Zappino, E.

Buckling of composite thin walled beams by refined theory

563-570

Shadmehri, F. / Hoa, S. V. / Hojjati, M.

Buckling of conical composite shells

787-792

Xiong, Jian / Vaziri, Ashkan / Ma, Li / Papadopoulos, Jim / Wu, Linzhi

Compression and impact testing of two-layer composite pyramidal-core sandwich panels

793-801

Yu, Young Ho / Kim, Bu Gi / Lee, Dai Gil

Cryogenic reliability of composite insulation panels for liquefied natural gas (LNG) ships

462-468

Batra, R. C. / Gopinath, G. / Zheng, J. Q.

Damage and failure in low energy impact of fiber-reinforced polymeric composite laminates

540-547

Naito, Kimiyoshi / Kagawa, Yutaka / Kurihara, Kanshi

Dielectric properties and noncontact damage detection of plain-woven fabric glass fiber reinforced epoxy matrix composites using millimeter wavelength microwave

695-701

Biscaia, Hugo C. / Chastre, Carlos / Silva, Manuel A. G.

Double shear tests to evaluate the bond strength between GFRP/concrete elements

681-694

Ataş, A. / Mohamed, G. F. / Soutis, C.

Effect of clamping force on the delamination onset and growth in bolted composite laminates

548-552

Liu, B. / Xing, Y. F. / Qatu, M. S. / Ferreira, A. J. M.

Exact characteristic equations for free vibrations of thin orthotropic circular cylindrical shells

484-493

Davidson, Paul / Waas, Anthony M. / Yerramalli, Chandra S.

Experimental determination of validated, critical interfacial modes I and II energy release rates in a composite sandwich panel

477-483

Al-Zubaidy, Haider / Al-Mahaidi, Riadh / Zhao, Xiao-Ling

Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads

510-518

Nguyen, Khanh-Hung / Park, Yong-Bin / Kweon, Jin-Hwe / Choi, Jin-Ho

Failure behaviour of foam-based sandwich joints under pull-out testing

617-624

Černý, Ivo / Mayer, Rayner M.

Fatigue of selected GRP composite components and joints with damage evaluation

664-670

Larbi, W. / Deü, J.-F. / Ohayon, R.

Finite element formulation of smart piezoelectric composite plates coupled with acoustic fluid

501-509

Zhang, H. W. / Smith, S. T.

FRP-to-concrete joint assemblages anchored with multiple FRP anchors

403-414

Zhou, Ying-Wu / Wu, Yu-Fei

General model for constitutive relationships of concrete and its composite structures

580-592

Perret, Adrien / Mistou, Sébastien / Fazzini, Marina / Brault, Romain

Global behaviour of a composite stiffened panel in buckling. Part 2: Experimental investigation

376-385

Kaminski, M. / Leśniak, M.

Homogenization of metallic fiber-reinforced composites under stochastic ageing

386-393

Panciroli, R. / Abrate, S. / Minak, G. / Zucchelli, A.

Hydroelasticity in water-entry problems: Comparison between experimental and SPH results

532-539

Palazzetti, R. / Zucchelli, A. / Gualandi, C. / Focarete, M. L. / Donati, L. / Minak, G. / Ramakrishna, S.

Influence of electrospun Nylon 6,6 nanofibrous mats on the interlaminar properties of Gr–epoxy composite laminates

571-579

Leong, Martin / Overgaard, Lars C. T. / Thomsen, Ole T. / Lund, Erik / Daniel, Isaac M.

Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades

768-778

Tashan, Jawdat / Al-Mahaidi, Riadh

Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography

519-531

Obradovic, Jovan / Boria, Simonetta / Belingardi, Giovanni

Lightweight design and crash analysis of composite frontal impact energy absorbing structures

423-430

Totaro, G.

Local buckling modelling of isogrid and anisogrid lattice cylindrical shells with triangular cells

446-452

Frieden, Jeannot / Cugnoni, Joël / Botsis, John / Gmür, Thomas

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part I: Impact detection and localization

438-445

Frieden, Jeannot / Cugnoni, Joël / Botsis, John / Gmür, Thomas

Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors – Part II: Damage identification

593-600

O'Loinsigh, Cian / Oudjene, Marc / Shotton, Elisabeth / Pizzi, Antonio / Fanning, Paul

Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels

313-321

Tran, T. D. / Kelly, D. / Prusty, B. G. / Gosse, J. H. / Christensen, S.

Micromechanical modelling for onset of distortional matrix damage of fiber reinforced composite materials

745-757

Murari, V. / Upadhyay, C. S.

Micromechanics based ply level material degradation model for unidirectional composites

671-680

Cook, Alden C. / Vel, Senthil S.

Multiscale analysis of laminated plates with integrated piezoelectric fiber composite actuators

322-336

Ribeiro, Marcelo Leite / Tita, Volnei / Vandepitte, Dirk

A new damage model for composite laminates

635-642

Quinteros, Ricardo D. / Oller, Sergio / Nallim, Liz G.

Nonlinear homogenization techniques to solve masonry structures problems

724-730

Aksoylar, Cenk / Ömercikoğlu, Akın / Mecitoğlu, Zahit / Omurtag, Mehmet H.

Nonlinear transient analysis of FGM and FML plates under blast loads by experimental and mixed FE methods

731-744

Gherlone, M. / Iurlaro, L. / Di Sciuva, M.

A novel algorithm for shape parameter selection in radial basis functions collocation method

453-461

Chishti, Maajid / Wang, Chun H. / Thomson, Rodney S. / Orifici, Adrian C.

Numerical analysis of damage progression and strength of countersunk composite joints

643-653

Demasi, Luciano

Partially Zig-Zag Advanced Higher Order Shear Deformation Theories Based on the Generalized Unified Formulation

363-375

Ameli, A. / Datla, N. V. / Azari, S. / Papini, M. / Spelt, J. K.

Prediction of environmental degradation of closed adhesive joints using data from open-faced specimens

779-786

Cinefra, M. / Carrera, E. / Della Croce, L. / Chinosi, C.

Refined shell elements for the analysis of functionally graded structures

415-422

Kriegesmann, Benedikt / Jansen, Eelco L. / Rolfes, Raimund

Semi-analytic probabilistic analysis of axially compressed stiffened composite panels

654-663

Asadi, Ebrahim / Wang, Wenchao / Qatu, Mohamad S.

Static and vibration analyses of thick deep laminated cylindrical shells using 3D and various shear deformation theories

494-500

Kamiński, Marcin

Stochastic Boundary Element Method analysis of the interface defects in composite materials

394-402

Park, Yong-Bin / Lee, Byeong-Hee / Kweon, Jin-Hwe / Choi, Jin-Ho / Choi, Ik-Hyeon

The strength of composite bonded T-joints transversely reinforced by carbon pins

625-634

Sexton, Anthony / Cantwell, Wesley / Kalyanasundaram, Shankar

Stretch forming studies on a fibre metal laminate based on a self-reinforcing polypropylene composite

431-437

Wang, S. / Harvey, C.

A theory of one-dimensional fracture

758-767

Chaudhuri, Reaz A. / Yoon, Jinyong

Three-dimensional asymptotic mode I/II stress fields at the front of interfacial crack/anticrack discontinuities in trimaterial bonded plates

351-362

Yoon, Jinyong / Chaudhuri, Reaz A.

Three-dimensional asymptotic stress fields at the front of a trimaterial junction

337-350

Kim, Ki Hyun / Yoon, Soon Ho / Lee, Dai Gil

Vibration isolation of LNG containment systems due to sloshing with glass fiber composite

469-476

Publicité

Composite Structures - v. 94, n. 2 (janvier 2012)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Composite Structures - v. 94, n. 2 (janvier 2012)

Articles dans ce numéro

Vous avez dépassé votre limite de téléchargement mensuelle ! Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois. Les utilisateurs·rices de Structurae Pro sont limités à 50.

Données obligatoires

Vous avez dépassé votre limite de téléchargement mensuelle !

Les abonné·es à Structurae Plus peuvent télécharger 30 images ou ensembles de données par mois.
Les utilisateurs·rices de Structurae Pro sont limités à 50.