Composite Structures - November 2013

Published:	November 2013

Articles in this Issue

Author(s)	Title	Page(s)
Suresh Kumar, R. / Ray, M. C.	Active control of geometrically nonlinear vibrations of doubly curved smart sandwich shells using 1–3 piezoelectric composites	173-187
Natarajan, S. / Ferreira, A. J. M. / Bordas, S. P. A. / Carrera, E. / Cinefra, M.	Analysis of composite plates by a unified formulation-cell based smoothed finite element method and field consistent elements	75-81
Batra, R. C. / Xiao, J.	Analysis of post-buckling and delamination in laminated composite St. Venant–Kirchhoff beams using CZM and layer-wise TSNDT	369-384
Qi, Chang / Yang, Shu / Yang, Li-Jun / Wei, Zhi-Yong / Lu, Zhen-Hua	Blast resistance and multi-objective optimization of aluminum foam-cored sandwich panels	45-57
Lopatin, A. V. / Morozov, E. V.	Buckling of a uniformly compressed rectangular SSCF composite sandwich plate	108-115
Lameiras, Rodrigo / Barros, Joaquim / Valente, Isabel B. / Azenha, Miguel	Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part I: Conception and pull-out tests	446-459
Lameiras, Rodrigo / Barros, Joaquim / Azenha, Miguel / Valente, Isabel B.	Development of sandwich panels combining fibre reinforced concrete layers and fibre reinforced polymer connectors. Part II: Evaluation of mechanical behaviour	460-470
Piovan, M. T. / Ramírez, J. M. / Sampaio, R.	Dynamics of thin-walled composite beams: Analysis of parametric uncertainties	14-28
Miranda Guedes, Rui / Pereira, Celeste M. C. / Fonseca, Alexandra / Oliveira, Mónica S. A.	The effect of carbon nanotubes on viscoelastic behaviour of biomedical grade ultra-high molecular weight polyethylene	263-268
Koo, Jae-Mean / Choi, Jung-Hun / Seok, Chang-Sung	Evaluation for residual strength and fatigue characteristics after impact in CFRP composites	58-65
D'Ambrisi, Angelo / Mezzi, Marco / Caporale, Andrea	Experimental investigation on polymeric net-RCM reinforced masonry panels	207-215
Waimer, M. / Kohlgrüber, D. / Hachenberg, D. / Voggenreiter, H.	Experimental study of CFRP components subjected to dynamic crash loads	288-299
Azhari, F. / Boroomand, B. / Shahbazi, M.	Exponential basis functions in the solution of laminated plates using a higher-order Zig–Zag theory	398-407
Bilasse, M. / Oguamanam, D. C. D.	Forced harmonic response of sandwich plates with viscoelastic core using reduced-order model	311-318
Uymaz, B.	Forced vibration analysis of functionally graded beams using nonlocal elasticity	227-239
Mantari, J. L. / Guedes Soares, C.	Generalized layerwise HSDT and finite element formulation for symmetric laminated and sandwich composite plates	319-331
Fernandes, Emanuel M. / Mano, João F. / Reis, Rui L.	Hybrid cork–polymer composites containing sisal fibre: Morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction	153-162
He, Wen-ming / Chen, Wei-qiu / Qiao, Hua	In-plane vibration of rectangular plates with periodic inhomogeneity: Natural frequencies and their adjustment	134-140
Hosseini, M. / Khalili, S. M. R. / Fard, K. Malekzadeh	An indentation law for doubly curved composite sandwich panels with rigid-plastic core subjected to flat-ended cylindrical indenters	82-89
Kwon, Y. W. / Priest, E. M. / Gordis, J. H.	Investigation of vibrational characteristics of composite beams with fluid–structure interaction	269-278
Khalili, S. M. R. / Ardali, A.	Low-velocity impact response of doubly curved symmetric cross-ply laminated panel with embedded SMA wires	216-226
Azoti, W. L. / Tchalla, A. / Koutsawa, Y. / Makradi, A. / Rauchs, G. / Belouettar, S. / Zahrouni, H.	Mean-field constitutive modeling of elasto-plastic composites using two (2) incremental formulations	256-262
Gao, Liang / Sun, Yuguo / Cong, Lixin / Chen, Peng	Mechanical behaviours of composite sandwich panel with strengthened pyramidal truss cores	149-152
Hankeln, F. / Mahnken, R.	A mesoscopic model for deep drawing of carbon fibre prepregs at large strains	340-350
Ribeiro, M. C. S. / Fiúza, A. / Castro, A. C. M. / Silva, F. G. / Dinis, M. L. / Meixedo, J. P. / Alvim, M. R.	Mix design process of polyester polymer mortars modified with recycled GFRP waste materials	300-310
Rahmani, B. / Mortazavi, F. / Villemure, I. / Levesque, M.	A new approach to inverse identification of mechanical properties of composite materials: Regularized model updating	116-125
Sahoo, Rosalin / Singh, B. N.	A new inverse hyperbolic zigzag theory for the static analysis of laminated composite and sandwich plates	385-397
Upadhyay, A. K. / Shukla, K. K.	Non-linear static and dynamic analysis of skew sandwich plates	141-148
Alijani, Farbod / Amabili, Marco	Nonlinear vibrations of laminated and sandwich rectangular plates with free edges. Part 1: Theory and numerical simulations	422-436
Alijani, Farbod / Amabili, Marco / Ferrari, Giovanni / D'Alessandro, Vincenzo	Nonlinear vibrations of laminated and sandwich rectangular plates with free edges. Part 2: Experiments & comparisons	437-445
Isbilir, Ozden / Ghassemieh, Elaheh	Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites	126-133
Lubineau, Gilles / Nouri, Hedi / Roger, Frederic	On micro–meso relations homogenizing electrical properties of transversely cracked laminated composites	66-74
Araujo, A. L. / Madeira, J. F. A. / Mota Soares, C. M. / Mota Soares, C. A.	Optimal design for active damping in sandwich structures using the Direct MultiSearch method	29-34
Vandellos, T. / Huchette, C. / Carrere, N.	Proposition of a framework for the development of a cohesive zone model adapted to Carbon-Fiber Reinforced Plastic laminated composites	199-206
Zhang, Guoqi / Wang, Bing / Ma, Li / Xiong, Jian / Yang, Jinshui / Wu, Linzhi	The residual compressive strength of impact-damaged sandwich structures with pyramidal truss cores	188-198
Ekh, Johan / Schön, Joakim / Zenkert, Dan	Simple and efficient prediction of bearing failure in single shear, composite lap joints	35-44
Wu, Wangqing / Xie, Lei / Jiang, Bingyan / Ziegmann, Gerhard	Simultaneous binding and toughening concept for textile reinforced pCBT composites: Manufacturing and flexural properties	279-287
Li, Yong / Viola, Erasmo	Size effect investigation of a central interface crack between two bonded dissimilar materials	90-107
Alzahrani, Ebraheem O. / Zenkour, Ashraf M. / Sobhy, Mohammed	Small scale effect on hygro-thermo-mechanical bending of nanoplates embedded in an elastic medium	163-172
Asprone, Domenico / Auricchio, Ferdinando / Menna, Costantino / Morganti, Simone / Prota, Andrea / Reali, Alessandro	Statistical finite element analysis of the buckling behavior of honeycomb structures	240-255
Malekzadeh, P. / Bahranifard, F. / Ziaee, S.	Three-dimensional free vibration analysis of functionally graded cylindrical panels with cut-out using Chebyshev–Ritz method	1-13
Weps, Matthias / Naumenko, Konstantin / Altenbach, Holm	Unsymmetric three-layer laminate with soft core for photovoltaic modules	332-339
Godat, Ahmed / Légeron, Frédéric / Gagné, Vincent / Marmion, Benjamin	Use of FRP pultruded members for electricity transmission towers	408-421
Challamel, Noël	Variational formulation of gradient or/and nonlocal higher-order shear elasticity beams	351-368

About this
data sheet
IssueID
37883
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - November 2013

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - November 2013

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.